Functional Confirmation Using a Medical X-Ray System of a Semiconductor Survey Meter

In recent years, semiconductor survey meters have been developed and are in increasing demand worldwide. This study determined if it is possible to use the X-ray system installed in each medical facility to calculate the time constant of a semiconductor survey meter and confirm the meter’s function. An additional filter was attached to the medical X-ray system to satisfy the standards of N-60 to N-120, more copper plates were added as needed, and the first and second half-value layers were calculated to enable comparisons of the facility’s X-ray system quality with the N-60 to N-120 quality values. Next, we used a medical X-ray system to measure the leakage dose and calculate the time constant of the survey meter. The functionality of the meter was then checked and compared with the energy characteristics of the meter. The experimental results showed that it was possible to use a medical X-ray system to reproduce the N-60 to N-120 radiation quality values and to calculate the time constant from the measured results, assuming actual leakage dosimetry for that radiation quality. We also found that the calibration factor was equivalent to that of the energy characteristics of the survey meter.

Study of large medical equipment allocation in Xuzhou

Objective: To investigate the allocation and management of large medical equipment (LME) in Xuzhou, Jiangsu Province, China, in order to make the best use of LME to meet the medical needs of local people. Methods: The research collected data from all hospitals that have LME in Xuzhou using questionnaire; 38 (97.4%) hospitals returned the questionnaire. Results: In Xuzhou, there are a total of 71 pieces of LME, each serving 126 600 people in an area of 163 km2. Sixty-two percent of them are allocated in urban areas, with Gini coefficient at 0.52, indicating imbalance and biased allocation of LME. Conclusion: The al- location of LME in Xuzhou is out of control and unfairly allocated.

Practice and Exploration of Economic Benefit Evaluation of Medical Equipment in Our Hospital

Objective The evaluation index of medical equipment's economic benefit is based on the usage of medical equipment,the traditional data collection method is time-consuming,laborious and not entirely accurate.The usage of medical equipment is obtained by designing data query statements from the HIS system.Methods First the charging items are in correspondence with the device's name included,second fees and other relevant data are extracted from charging module in HIS.Through a rough estimate of the recovery period and an increase or decrease ratio,the economic benefit of the medical equipment can be analyzed.Results Through the method of the benefit analysis of the medical equipment,we can clearly find out the different economic benefit of the equipment,and finally analyze the reasons.Conclusion Practice has proved that,this methad,it can greatly reduce human,material resources required in data collection and improve the accuracy of the data.It can help hospital managers timely to grasp the operating costs of medical equipment and other information,and also provide scientific data for hospital managers when they purchase reasonable medical equipment.

Discussion on Management Model of Medical Equipment Maintenance in Hospital

With the development of technology, medical equipment plays a more important role in the modern hospital. Medical equipment provides images, physiological results or other schematics of the patients to help doctors deal with the routines. It is also the major tool to the lab assistant in the clinical teaching and studies. It becomes one of a symbol of the technological level in modern hospital. The director of the hospital should establish an effi cacious management pattern to manage the medical equipment, so that it will be operated in good condition to insure the safety of the patients. Since the maintenance is an important part of medical equipment management, it is significant that the hospital should establish a system to fit for itself. The study reviews the issues in hospital medical equipment maintenance management, the development of the maintenance management model and the characteristics, as well as the status at home and abroad. The research has been fi nished by using literature research method, questionnaire survey method and data analysis method. Then we analyze the current status of hospital medical equipment maintenance management model to fi nd the problems. Based on the authentic and effective data from the survey, we can deduce the overview about the maintenance model in Beijing. The paper discusses the advantages and the disadvantages between the different model, and it makes suggestions on the follow aspects, such as system management, quality management, personnel management, cost management, information management perspective.

An Automated Detection Approach of Protective Equipment Donning for Medical Staff under COVID-19 Using Deep Learning

Personal protective equipment(PPE)donning detection for medical staff is a key link of medical operation safety guarantee and is of great significance to combat COVID-19.However,the lack of dedicated datasets makes the scarce research on intelligence monitoring of workers’PPE use in the field of healthcare.In this paper,we construct a dress codes dataset for medical staff under the epidemic.And based on this,we propose a PPE donning automatic detection approach using deep learning.With the participation of health care personnel,we organize 6 volunteers dressed in different combinations of PPE to simulate more dress situations in the preset structured environment,and an effective and robust dataset is constructed with a total of 5233 preprocessed images.Starting from the task’s dual requirements for speed and accuracy,we use the YOLOv4 convolutional neural network as our learning model to judge whether the donning of different PPE classes corresponds to the body parts of the medical staff meets the dress codes to ensure their self-protection safety.Experimental results show that compared with three typical deeplearning-based detection models,our method achieves a relatively optimal balance while ensuring high detection accuracy(84.14%),with faster processing time(42.02 ms)after the average analysis of 17 classes of PPE donning situation.Overall,this research focuses on the automatic detection of worker safety protection for the first time in healthcare,which will help to improve its technical level of risk management and the ability to respond to potentially hazardous events.

Self-Reported Use of Personal Protective Equipment during the SARS-CoV-2 Pandemic in Emergency Medical Service Employees in Germany—A Survey

Background: Multicentric prospective cohort investigation survey conducted between 1st of March and 1st of April 2021on SARS-CoV-2 occupational risk for German Emergency Medical Services (EMS) personnel. Study Objectives: Primary: The objective is to take stock of the use and availability of Personal Protective Equipment (PPE) in German EMS, both at managerial and employee level, during the SARS-CoV-2 pandemic. Secondary: Generate additional data on individual perceptions of risk of infection and occurrence of infections at respective places of service. Methods: Multicentric prospective cohort investigation survey conducted online at two levels of German EMS personnel—EMS managers and EMS employees, both medical and paramedical—with questions adapted slightly to fit the respective study population. Results: A total of 34 responses were received in the managerial group;a total of 2389 responses were received in the group of employees. Self-reported PPE adherence of EMS employees for confirmed SARS-CoV-2 positive patients: use of gloves (99.8%), FFP2 or FFP3 masks (99.8%), gowns or coveralls (99.1%), goggles (89.7%), face shields (24.0%), surgical masks (0.0%). Self-reported PPE adherence of EMS employees for suspected SARS-CoV-2 positive patients: gloves (98.8%), FFP2 or FFP3 masks (total: 99.4%), gowns or coveralls (total: 95.9%), goggles (85.6%), face shields (19.2%), surgical masks (0.2%). Conclusions: Findings included an overall improved self-reported adherence to PPE compared to studies that were conducted before the pandemic. Self-reported general adherence to PPE recommendations when attending to confirmed SARS-CoV-2 positive patients was good, with the exception of goggles. Self-reported adherence to PPE recommendations dropped when attending to suspected SARS-CoV-2 positive patients.

Beijing Astronautics Changfeng Medical Equipment Co.Ltd

The Beijing Astronautics Changfeng Medical Equipment Co. Ltd is a large enterprise within the Chinese astronautics system. It is the only key enterprise manufacturing anesthesia machines,monitoring instruments and respirators in China that has been in operation for ten years. The products are used in sev-

Guangdong Huatong Medical Equipment Development General Co.

The Guangdong Huatong Medical Equipment Development General Company is a high-tech enterprise for the development, research, production and trade of medical equipment. In the two years since its establishment, the company has set up the modern work-

Application of Big Data Information Platform in Medical Equipment

The application of big data in the medical device industry mainly refers to the analysis and processing of various medical devices,so as to provide patients with better treatment and rehabilitation services.At present,our country already has a relatively mature and reliable large database system.This article studies the application of medical equipment in the big data information platform.The main methods used in this article are survey method,case analysis method,and interview method.The big data information platform and medical devices are studied from different aspects.The survey results show that 41%of people completely agree with the role of big data information platforms in medical devices.

China's Medical Equipment and Instruments Industry

Great changes have taken place in China’s medical equipment and instruments industry since the launch of the reform. The industry has evolved a new structure consisting of various economic sectors.

A Discussion on setting up the socialized Medical Equipment Maintenance Organization

This paper analyzes the main current characteristics of three operational modes of medical equipment maintenance (depending on the hospital maintenance capability, the manufacturers who produce and sell the plants, and the part-time organizations), and points out their common problems which are that all the three modes are not comprehensive, specialized, and socialized maintenance service organizations that are suitable to hospitals.

The Application Value of Sanitary Wipes and Medical Alcohol+Gauze Disinfection Method in the Management and Use of Medical Equipment

Objective:To analyze the effect of sanitary wipes and medical alcohol+gauze disinfection methods on the management and use of medical equipment in hospitals.Methods:From February 2023 to August 2023,80 anorectal surgery medical instruments and equipment were randomly sampled as observation samples,and they were grouped using the random number table method(40 instruments in each group).One group was managed with sanitary wipes and medical alcohol+gauze disinfection method(observation group),and the other group was managed with medical alcohol+gauze disinfection method(control group).The degree of contamination on the surface of instruments and equipment and the staff satisfaction of both groups was noted and compared.Results:After cleaning and disinfection,the relative luminescence luminosity(RLU)value of the surface contamination of the sample instruments and equipment decreased significantly(P<0.05);and after cleaning and disinfection,the relative luminescence luminosity(RLU)of the observation group’s instruments and equipment decreased significantly,and the value was lower than that of the control group,(P<0.05);the results of the nursing job satisfaction questionnaire showed that the scores of each survey item in the observation group were higher than those in the control group,(P<0.05).Conclusion:Integrating sanitary wipes and medical alcohol+gauze disinfection method into the management and use of medical equipment not only improves the disinfection of medical instruments but also improves the job satisfaction of nursing staff.Therefore,this method should be popularized.

Efficient Deep-Learning-Based Autoencoder Denoising Approach for Medical Image Diagnosis

Effective medical diagnosis is dramatically expensive,especially in third-world countries.One of the common diseases is pneumonia,and because of the remarkable similarity between its types and the limited number of medical images for recent diseases related to pneumonia,themedical diagnosis of these diseases is a significant challenge.Hence,transfer learning represents a promising solution in transferring knowledge from generic tasks to specific tasks.Unfortunately,experimentation and utilization of different models of transfer learning do not achieve satisfactory results.In this study,we suggest the implementation of an automatic detectionmodel,namelyCADTra,to efficiently diagnose pneumonia-related diseases.This model is based on classification,denoising autoencoder,and transfer learning.Firstly,pre-processing is employed to prepare the medical images.It depends on an autoencoder denoising(AD)algorithm with a modified loss function depending on a Gaussian distribution for decoder output to maximize the chances for recovering inputs and clearly demonstrate their features,in order to improve the diagnosis process.Then,classification is performed using a transfer learning model and a four-layer convolution neural network(FCNN)to detect pneumonia.The proposed model supports binary classification of chest computed tomography(CT)images and multi-class classification of chest X-ray images.Finally,a comparative study is introduced for the classification performance with and without the denoising process.The proposed model achieves precisions of 98%and 99%for binary classification and multi-class classification,respectively,with the different ratios for training and testing.To demonstrate the efficiency and superiority of the proposed CADTra model,it is compared with some recent state-of-the-art CNN models.The achieved outcomes prove that the suggested model can help radiologists to detect pneumonia-related diseases and improve the diagnostic efficiency compared to the existing diagnosis models.

Wireless communication and wireless power transfer system for implantable medical device

Traditional magnetically coupled resonant wireless power transfer technology uses fixed distances between coils for research,to prevent fluctuations in the receiving voltage,and lead to reduce transmission efficiency.This paper proposes a closed-loop control wireless communication wireless power transfer system with a wearable four-coil structure to stabilize the receiving voltage fluctuation caused by changes in the displacement between the coils.Test results show that the system can provide stable receiving voltage,no matter how the distance between the transmitting coil and the receiving coil is changed.When the transmission distance is 20 mm,the power transfer efficiency of the system can reach 18.5%under the open-loop state,and the stimulus parameters such as the stimulation period and pulse width can be adjusted in real time through the personal computer terminal.

Medical errors, infection-control breaches and the use of adulterated and misbranded medical devices

Several well-publicized cases of improper cleaning,disinfection or sterilization of contaminated reusable medical equipment that posed an increased risk of patientto-patient disease transmission were reported within the past few years,resulting in the notification of approximately 20 000 patients.These medical errors,the specific infection-control standards they breached,and assessments of the risk of infection associated with each are discussed.Other topics discussed include the Food and Drug Administration’s(FDA)regulation of medical devices and infection-control products;the use of adulterated,misbranded,and investigational devices;consent decrees and associated Certificates of Medical Necessity;and informed patient consent.Focus is placed on liquid chemical sterilization,its history,and the FDA’s recent censure and discontinuation of a medical device labeled with this claim,namely,the STERIS System 1 processor.Recommendations are provided for healthcare facilities,regulatory agencies,manufacturers of reusable medical devices,and professional healthcare organizations and administrations to improve public health and prevent healthcareassociated infections.

Metal-Halide Perovskite Submicrometer-Thick Films for Ultra-Stable Self-Powered Direct X-Ray Detectors

Metal-halide perovskites are revolutionizing the world of X-ray detectors,due to the development of sensitive,fast,and cost-effective devices.Self-powered operation,ensuring portability and low power consumption,has also been recently demonstrated in both bulk materials and thin films.However,the signal stability and repeatability under continuous X-ray exposure has only been tested up to a few hours,often reporting degradation of the detection performance.Here it is shown that self-powered direct X-ray detectors,fabricated starting from a FAPbBr_(3)submicrometer-thick film deposition onto a mesoporous TiO_(2)scaffold,can withstand a 26-day uninterrupted X-ray exposure with negligible signal loss,demonstrating ultra-high operational stability and excellent repeatability.No structural modification is observed after irradiation with a total ionizing dose of almost 200 Gy,revealing an unexpectedly high radiation hardness for a metal-halide perovskite thin film.In addition,trap-assisted photoconductive gain enabled the device to achieve a record bulk sensitivity of 7.28 C Gy^(−1)cm^(−3)at 0 V,an unprecedented value in the field of thin-film-based photoconductors and photodiodes for“hard”X-rays.Finally,prototypal validation under the X-ray beam produced by a medical linear accelerator for cancer treatment is also introduced.

The Unrecognized Value of Bio-Medical Engineers in Healthcare Projects in Developing Countries

The healthcare needs of developing countries are great and ever increasing as their populations grow. Few assistance programs have recognized the value of the bio-medical engineer as part of the approach to the provision of healthcare in developing countries. An example of a program, the Bach Mai Hospital Project, in Vietnam, utilizing the talents of the bio-medical engineer, attests to the potential value of bio-medical engineers as part of the healthcare team. Their inclusion in such efforts can result in the saving of lives, time and money. Knowledge of their hospital's excess equipment inventory and their ability to restore medical equipment badly needed in a developing country makes them valuable additions to any medical assistance program.

A Study of Safety Evaluation Method for Medical Diagnostic Table

Medical diagnostic tables are widely used inthemedical diagnostic equipment. For multifarious diagnostic needs, the medical diagnostic table works in various operating modes. In order to ensure patient safety, safety factor of medical diagnostic table must meet safety requirement. The paper puts forward a method to find relations between key parameters and stress of table, identify maximum stress modes, reduce modes number of load test, and remove conservative high stress areas from finite element analysis result, by synthesizingthestress result of finite element analysis and measurement data for various operating modes of medical diagnostic table. It will help shorten test time, avoid over strength design, and reduce table’s cost. An application example of the method is presented by evaluating a specific CT medical diagnostictable. This method can be a reference for safety evaluation of all medical diagnostic tables.

An Assessment of Both Patients and Medical Staff Awareness of the Risks of Ionizing Radiation from CT Scan in Cameroon

Objectives: To assess the patients and health personnel’s level of awareness on risks related to ionizing radiation during CT scan. Materials and methods: Three questionnaires were addressed to patients, prescribing physicians, and the medical imaging staff for three hospitals respectively. This permitted us to assess their knowledge on the benefits and risks of the required medical exam, based on the dangers of being exposed to X-rays, especially induced-radiation cancer following the amount of X-rays received during a CT scan and the possibility of not receiving radiation as tools of diagnosis. Results: 150 patients, 84 referring doctors of CT scan tests and 60 medical imaging personnel were retained. For patients, only 7.1% received information on the benefits and risks of their exams, and 34.4% believed that x-rays were harmful to their health. For the prescribers, 46.7% took into account the benefits/risk ratio before prescribing a test and only 16.7% of the referring doctors have informed the patient of the risks related to X-ray. 90% of the medical imaging staff ensures that the required test is justified, and 50% informed the patient on the risks associated with their radiation exposure, and the increased risk of developing cancer. 65% of the imaging staff could not estimate the dose that the patient will receive during the medical test. 25% mentioned the dose received during the acquisition in the patient’s exam report. Conclusion: This study confirms that the referring doctors, the patients, and the radiologists have a low knowledge concerning the risks associated with radiation exposure during a CT scan assessment. We will therefore say that patients and prescribers are not aware of the doses of radiation on CT and their possible risks, even though there is a risk of developing cancer.

Interest of Systematic Chest Radiography during Periodic Medical Visits in Workers

Background: Systematic chest X-ray is the most prescribed examination by occupational physicians during periodic medical check-ups in our context, unlike in most countries where this practice has been discontinued. Objective: The objective was to determine the diagnostic yield and cost-effectiveness of chest radiography during periodic medical check-ups of workers in Ngaoundere. Materials and Methods: A cross-sectional and descriptive study was carried out in Ngaoundere Regional Hospital from January to December 2018, concerning all persons coming to perform a systematic chest X-ray in the context of the periodic medical check-up having been consented to participate in the study. Posteroanterior (PA) chest radiographs were obtained from all workers during this periodic medical check-up. The variables studied were: age, sex, clinical manifestations, antecedents, job type, cost, and chest X-ray results. Statistical analysis was performed using the Sphinx Plus2-Lexica-V5 Edition software. Results: 753 workers were selected for this study, of whom 88.04% were men and 11.96% were women, a sex ratio H/F is of 7.4, the average age was 39 ± 7.89 years with extremes of 24 and 56 years, the most frequent job type was the administration (38.37%), the storekeepers (17.92) and the drivers (15.27%), most of them were asymptomatic (97.47%), some had cough (2.52%), chest pain (2.12%), dyspnea (0.26%) and fever (0.13%). History was dominated by lung infection (2.39%), pleurisy (1.06%) and tuberculosis (0.79%). 7.43% of workers occasionally smoked tobacco and consumed alcohol. 41 cases of pathologies (5.44%) were found on the chest X-ray, including 1 case (0.13%) of evolutionary pathology, 40 cases (5.31%) of sequelae pathologies. When the results of the chest X-ray are compared with the clinical signs and the pathological history of the workers, it is found that the only case with evolutionary abnormalities on the chest X-ray showed clinical signs and that the other cases with sequelae abnormalities had either clinical signs or antecedents related to these abnormalities. The cost of a chest X-ray at the time of our study was 5,000 FCFA ($8.59), for a total of 3,765,000 FCFA ($6473.74) for all the X-rays performed. Conclusion: In view of the low rate of abnormalities on the chest X-ray and the sequelae nature of the pathologies, it can be said that the routine X-ray of the chest during the periodic medical check-ups has a low diagnostic yield and a low cost-effectiveness ratio and is not profitable. It should be non-systematic and case-by-case based on the clinical context and background of workers.