To develop a new kind of denture adhesive （DA）, then to evaluate its mechanical and chemical properties, polyethylene oxide, methyl cellulose, sodium alginate, and cellulose ether, were viewed as four main factors, ...To develop a new kind of denture adhesive （DA）, then to evaluate its mechanical and chemical properties, polyethylene oxide, methyl cellulose, sodium alginate, and cellulose ether, were viewed as four main factors, which would affect bonding load of DA, while two levels of each component were differentiated. Following table L12（211）, twelve different formulae were designed by orthogonal design and bonding load values were recorded. According to bonding load of each formula, the optimized formula was selected out as this new adhesive material, Comfort-DA II. The changing of bonding load values of Comfort-DA II marinating in artificial saliva were measured, and an existing product, Protefix and Comfort-DA, were used as controls. Following initial load readings, samples and controls were measured from 1- to 12- hour intervals, respectively. Comfort-DA II was diluted at 1.0%, 2.0%, 3.3%, 5.0%, and 10.0% concentrations, and pH values were measured at 1-, 2-, 3-, 4-, 5-, 6-, and 8-hour intervals. Comfort-DA II presented as a pale-yellow paste. Group 6 gained the highest bonding load value of [193.8 （4.2）] N. The mean bonding load of Comfort-DA II was statistically different to Comfort-DA （p = 0.004） and Protefix （p = 0.006）. Comfort-DA II exhibited a progressive increase in pH value over time and was slightly alkaline. Comfort-DA II showed significantly elevated mechanical and chemical properties, comparing to Comfort-DA. The results also indicate that orthogonal design may be an efficacious way to develop new dental materials.展开更多
High-temperature-resistant adhesives are critical materials in the aerospace field.The zirconium-modified aluminum phosphate-based adhesives developed in this work had the advantage of adjustable thermal expansibility...High-temperature-resistant adhesives are critical materials in the aerospace field.The zirconium-modified aluminum phosphate-based adhesives developed in this work had the advantage of adjustable thermal expansibility,achieving a high matching of coefficient of thermal expansion(CTE)with alumina.The introduction of zirconium can significantly improve the thermal stability of the adhesive matrix,and the Zr/Al ratio substantially affects the various reaction processes inside the adhesive,especially the types of zirconium-containing compounds.Most of the zirconium-containing compounds in the A7Z3 adhesive were ZrO_(2) only when the mass ratio of zirconium hydroxide to aluminum hydroxide was 3:7,which was the key reason why it had the highest CTE.The room-temperature bonding strength of A7Z3 after heat treatment at 1500℃reached 67.2 MPa.After pretreatment at 1500℃,the high-temperature bonding strength of A7Z3 was greater than 50 MPa in the range of(room temperature)RT-1000℃.After 40 thermal cycles between RT and 1500℃,the bonding strength still reached 10 MPa.Physical bonding occurred at temperatures below 1000℃,while chemical bonding dominated above 1000℃based on the generation of Al5BO9 and mullite at the interfaces.展开更多
基金Funded by the Science and Technology Planning Project of Guangdong Province, China (2010B060900045)
文摘To develop a new kind of denture adhesive （DA）, then to evaluate its mechanical and chemical properties, polyethylene oxide, methyl cellulose, sodium alginate, and cellulose ether, were viewed as four main factors, which would affect bonding load of DA, while two levels of each component were differentiated. Following table L12（211）, twelve different formulae were designed by orthogonal design and bonding load values were recorded. According to bonding load of each formula, the optimized formula was selected out as this new adhesive material, Comfort-DA II. The changing of bonding load values of Comfort-DA II marinating in artificial saliva were measured, and an existing product, Protefix and Comfort-DA, were used as controls. Following initial load readings, samples and controls were measured from 1- to 12- hour intervals, respectively. Comfort-DA II was diluted at 1.0%, 2.0%, 3.3%, 5.0%, and 10.0% concentrations, and pH values were measured at 1-, 2-, 3-, 4-, 5-, 6-, and 8-hour intervals. Comfort-DA II presented as a pale-yellow paste. Group 6 gained the highest bonding load value of [193.8 （4.2）] N. The mean bonding load of Comfort-DA II was statistically different to Comfort-DA （p = 0.004） and Protefix （p = 0.006）. Comfort-DA II exhibited a progressive increase in pH value over time and was slightly alkaline. Comfort-DA II showed significantly elevated mechanical and chemical properties, comparing to Comfort-DA. The results also indicate that orthogonal design may be an efficacious way to develop new dental materials.
基金funded by the National Natural Science Foundation of China(No.51802343)the Natural Science Foundation of Tianjin City(No.23JCQNJC00180)+1 种基金the Open Project of National Key Laboratory of Intelligent Manufacturing Equipment and Technology(No.IMETKF2023021)the Tianjin Graduate Research Innovation Project(Aviation Special Project 2021YJSO2S16).
文摘High-temperature-resistant adhesives are critical materials in the aerospace field.The zirconium-modified aluminum phosphate-based adhesives developed in this work had the advantage of adjustable thermal expansibility,achieving a high matching of coefficient of thermal expansion(CTE)with alumina.The introduction of zirconium can significantly improve the thermal stability of the adhesive matrix,and the Zr/Al ratio substantially affects the various reaction processes inside the adhesive,especially the types of zirconium-containing compounds.Most of the zirconium-containing compounds in the A7Z3 adhesive were ZrO_(2) only when the mass ratio of zirconium hydroxide to aluminum hydroxide was 3:7,which was the key reason why it had the highest CTE.The room-temperature bonding strength of A7Z3 after heat treatment at 1500℃reached 67.2 MPa.After pretreatment at 1500℃,the high-temperature bonding strength of A7Z3 was greater than 50 MPa in the range of(room temperature)RT-1000℃.After 40 thermal cycles between RT and 1500℃,the bonding strength still reached 10 MPa.Physical bonding occurred at temperatures below 1000℃,while chemical bonding dominated above 1000℃based on the generation of Al5BO9 and mullite at the interfaces.
