This article presents the mass and heat transport aspects in viscoelastic nanofluid flows under the presence of velocity slip conditions. To explore the nonNewtonian behavior, a Maxwell viscoelasticity-based micropola...This article presents the mass and heat transport aspects in viscoelastic nanofluid flows under the presence of velocity slip conditions. To explore the nonNewtonian behavior, a Maxwell viscoelasticity-based micropolar is considered. Moreover, a porous medium saturates the stretching sheet. A set of similarity variables is introduced to derive the dimensionless ordinary differential equations of velocity, concentration, and temperature profiles. The numerical solution is computed by using the MATLAB bvp4c package. The salient flow features of velocity, concentration, and temperature profiles are described and discussed through various graphs. It is observed that with an increase in the slip parameter, the micro-rotation velocity also increases. The temperature of nanoparticles gets maximum values by varying the viscoelastic parameter and the porosity parameter while an opposite trend is noted for the micro-rotation parameter. The local Nusselt number and the local Sherwood number increase by increasing the viscoelastic parameter, the porosity parameter, and the slip velocity parameter. The graphical computation is performed for a specified range of parameters, such as 0 ≤ M ≤ 2.5, 0 ≤σm ≤ 2.5, 0 ≤ K1 ≤ 1.5, 0.5 ≤ Pr ≤ 3.0, 0 ≤σ≤ 1.5, 0.5 ≤ Sc ≤ 2.0, 0.2 ≤ Nb ≤ 0.8, and 0.2 ≤ Nt ≤ 0.8.展开更多
Reliable transport of Campylobocter jejuni isolates is critical to microbial epidemiology research, especially in developing countries without a good temperature control mailing system. Various factors, including oxyg...Reliable transport of Campylobocter jejuni isolates is critical to microbial epidemiology research, especially in developing countries without a good temperature control mailing system. Various factors, including oxygen, temperature, transport medium composition, could affect the survival of C jejunL In this study, the protective effects of different ingredients in C. jejuni transport media at 4 ℃ and 25 ℃ and under aerobic condition were quantitatively evaluated respectively. The results showed that enriched medium, supplementation with 5% blood and being kept at 4 ℃ could improve the viability of different C. jejuni strains during transport. In addition, supplementation with 25 mmol/L L-fucose in Wang＇s transport medium could significantly improve the survival of C.展开更多
Software engineering＇s lifecycle models havc proven to be very important for traditional software development. However, can these models be applied to the development of Web-based applications as well？ In recent yea...Software engineering＇s lifecycle models havc proven to be very important for traditional software development. However, can these models be applied to the development of Web-based applications as well？ In recent years, Web-based applications have become more and more complicated and a lot of efforts have been placed on introducing new technologies such as J2EE, PhP, and .NET, etc., which have been universally accepted as the development technologies for Web-based applications. However, there is no universally accepted process model for the development of Web-based applications. Moreover, shaping the process model for small medium-sized enterprises （SMEs）, which have limited resources, has been relatively neglected. Based on our previous work, this paper presents an expanded lifecycle process model for the development of Web-based applications in SMEs. It consists of three sets of processes, i.e., requirement processes, development processes, and evolution processes. Particularly, the post-delivery evolution processes are important to SMEs to develop and maintain quality web applications with limited resources and time.展开更多
1.IntroductionMedium Mn steel was developed be-cause the wear resistance of Hadfield steel(Mn13)is poor under low or medium im-pact and extrusion abrasion[1-4].In theforegoing investigations[2-4]we found thatwith the ...1.IntroductionMedium Mn steel was developed be-cause the wear resistance of Hadfield steel(Mn13)is poor under low or medium im-pact and extrusion abrasion[1-4].In theforegoing investigations[2-4]we found thatwith the increase of C content,theneedle-like and network carbide in mediumMn steel increased(as shown in Fig.1(a)and(c)).Although its wear resistance was largelyimproved,its impact toughness was greatlydecreased.In order to increase toughness,along-term high temperature heat-treatmentwas needed.But the treatment caused cracks展开更多
文摘This article presents the mass and heat transport aspects in viscoelastic nanofluid flows under the presence of velocity slip conditions. To explore the nonNewtonian behavior, a Maxwell viscoelasticity-based micropolar is considered. Moreover, a porous medium saturates the stretching sheet. A set of similarity variables is introduced to derive the dimensionless ordinary differential equations of velocity, concentration, and temperature profiles. The numerical solution is computed by using the MATLAB bvp4c package. The salient flow features of velocity, concentration, and temperature profiles are described and discussed through various graphs. It is observed that with an increase in the slip parameter, the micro-rotation velocity also increases. The temperature of nanoparticles gets maximum values by varying the viscoelastic parameter and the porosity parameter while an opposite trend is noted for the micro-rotation parameter. The local Nusselt number and the local Sherwood number increase by increasing the viscoelastic parameter, the porosity parameter, and the slip velocity parameter. The graphical computation is performed for a specified range of parameters, such as 0 ≤ M ≤ 2.5, 0 ≤σm ≤ 2.5, 0 ≤ K1 ≤ 1.5, 0.5 ≤ Pr ≤ 3.0, 0 ≤σ≤ 1.5, 0.5 ≤ Sc ≤ 2.0, 0.2 ≤ Nb ≤ 0.8, and 0.2 ≤ Nt ≤ 0.8.
基金supported by grant(2012AA101603)from the Ministry of Science Technologygrant(2011X7)from the National Institute of Food and Drug Controlgrant(81102131)from the National Natural Science Foundation of China
文摘Reliable transport of Campylobocter jejuni isolates is critical to microbial epidemiology research, especially in developing countries without a good temperature control mailing system. Various factors, including oxygen, temperature, transport medium composition, could affect the survival of C jejunL In this study, the protective effects of different ingredients in C. jejuni transport media at 4 ℃ and 25 ℃ and under aerobic condition were quantitatively evaluated respectively. The results showed that enriched medium, supplementation with 5% blood and being kept at 4 ℃ could improve the viability of different C. jejuni strains during transport. In addition, supplementation with 25 mmol/L L-fucose in Wang＇s transport medium could significantly improve the survival of C.
文摘Software engineering＇s lifecycle models havc proven to be very important for traditional software development. However, can these models be applied to the development of Web-based applications as well？ In recent years, Web-based applications have become more and more complicated and a lot of efforts have been placed on introducing new technologies such as J2EE, PhP, and .NET, etc., which have been universally accepted as the development technologies for Web-based applications. However, there is no universally accepted process model for the development of Web-based applications. Moreover, shaping the process model for small medium-sized enterprises （SMEs）, which have limited resources, has been relatively neglected. Based on our previous work, this paper presents an expanded lifecycle process model for the development of Web-based applications in SMEs. It consists of three sets of processes, i.e., requirement processes, development processes, and evolution processes. Particularly, the post-delivery evolution processes are important to SMEs to develop and maintain quality web applications with limited resources and time.
文摘1.IntroductionMedium Mn steel was developed be-cause the wear resistance of Hadfield steel(Mn13)is poor under low or medium im-pact and extrusion abrasion[1-4].In theforegoing investigations[2-4]we found thatwith the increase of C content,theneedle-like and network carbide in mediumMn steel increased(as shown in Fig.1(a)and(c)).Although its wear resistance was largelyimproved,its impact toughness was greatlydecreased.In order to increase toughness,along-term high temperature heat-treatmentwas needed.But the treatment caused cracks
