Heat-Generating Effects Involving Multiple Nanofluids in a Hybrid Convective Boundary Layer Flow on the Sloping Plate in a Porous Medium

The hybrid convective boundary layer circulation involving multiple nanofluids via a medium with pores is approaching a sloping plate. An investigation regarding the heat-generating effects upon the examined nanofluid flows has been carried out through computational analysis. A mathematical framework employing governing differential equations that are partial has been implemented to produce an ensemble of ordinary differential equations, which happen to be nonlinear that incorporate nanofluid flows by utilizing acceptable transformations. Through the combination of the Nachtsheim-Swigert shooting method and the Runge-Kutta method, the group of resulting non-dimensionalized equations is solved computationally. In a few special, confined cases, the corresponding numeric output is thereafter satisfactorily matched with the existing available research. The consequences of heat generation regarding local skin friction coefficient and rate of heat in conjunction with mass transfer have been investigated, evaluated, and reported on the basis of multiple nanofluid flows.

Effect of dietary supplementation with discardednutrient medium of Cordyceps militaris on layingperformance and diversity of intestinal flora in laying hens

The aim of the experiment was to explore the feasibility of discarded nutrient medium of Cordyceps militaris as feed in the production of laying hens. 100 g/kg, 200 g/kg, 300 g/kg of discarded nutrient medium of Cordyceps militaris were added to the basal diet of laying hens. The results showed that the optimal addition of discarded nutrient medium of Cordyceps militaris in the diet of laying hens was 10%. According to the results of measuring the conventional indicators of eggs, the weight of eggs produced by laying hens fed with discarded nutrient medium of Cordyceps militaris was higher than that of laying hens fed with ordinary laying hens. The content of interleukin-1(IL-1) in the experimental group was significantly higher than that in the control group, and the concentration of IL-1 increased by 141.5 pg/mL, which indicated that the application of discarded nutrient medium of Cordyceps militaris effectively improved the immunity of laying hens. The high-throughput analysis of the intestinal contents of the two groups of laying hens showed that the microbial population abundance of the intestinal tract of the experimental group was greater than that of control group, and the application of discarded nutrient medium of Cordyceps militaris increased the diversity of bacteria in the intestinal tract of laying hens. In addition, the sensitivity of some pathogenic bacteria in the intestinal tract of chickens to drugs was also increased, thereby reducing the use of antibiotics. The secondary utilization of discarded nutrient medium of Cordyceps militaris has great development and utilization prospects, which provided a scientific reference and basic theoretical basis for the development of discarded nutrient medium of Cordyceps militaris as feed in the production of laying hens.

Cross-Diffusion Effects on an MHD Williamson Nanofluid Flow Past a Nonlinear Stretching Sheet Immersed in a Permeable Medium

The primary aim of this research endeavor is to examine the characteristics of magnetohydrodynamicWilliamson nanofluid flow past a nonlinear stretching surface that is immersed in a permeable medium.In the current analysis,the impacts of Soret and Dufour(cross-diffusion effects)have been attentively taken into consideration.Using appropriate similarity variable transformations,the governing nonlinear partial differential equations were altered into nonlinear ordinary differential equations and then solved numerically using the Runge Kutta Fehlberg-45 method along with the shooting technique.Numerical simulations were then perceived to show the consequence of various physical parameters on the plots of velocity,temperature,and concentration of the nanofluid flow.Boosting the magnetic,Williamson,porosity,and stretching sheet index parameters,the velocity of the fluid flow decreases.The temperature is enhanced as theWilliamson and Brownian motion parameters upsurge,but it decreases as the Prandtl,thermophoresis,stretching sheet index,and Dufour parameters escalate.The concentration distribution decreases as the thermophoresis andmagnetic parameters upsurge,but it escalates as the Soret,Schmidt,Brownian motion,and stretching sheet index parameters increase.Skin friction coefficient boosted as the stretching sheet index and magnetic parameters enhanced against the Williamson parameter.The findings from this study have been contrasted with earlier findings on local Nusselt numbers,which show substantial support and endorse the existing approach’s validity.The numerical values of the local Sherwood number gradually increase as the Schmidt,Soret,stretching sheet index,and thermophoresis parameters are upsurged.

Hybrid Effects on MHD Mixed Convective Boundary Layer Flow through a Sloped Plate in Existence of Nanofluid-Saturated Porous Medium

This study examines the effects of heat, mass, and boundary layer assumptions-based nanoparticle characteristics on the hybrid effects of using MHD in conjunction with mixed convective flow through a sloped vertical pore plate in the existence of medium of porous. Physical characteristics such as thermo-diffusion, injection-suction, and viscous dissipation are taken into consideration, in addition to an equally distributed magnetic force utilized as well in the completely opposite path of the flow. By means of several non-dimensional transformations, the momentum, energy, concentration, and nanoparticle volume fraction equations under investigation are converted in terms of nonlinear boundary layer equations and computationally resolved by utilizing the sixth-order Runge-Kutta strategy in combination together with the iteration of Nachtsheim-Swigert shooting procedure. By contrasting the findings produced for a few particular examples with those found in the published literature, the correctness of the numerical result is verified, and a rather good agreement is found. Utilizing various ranges of pertinent factors, computing findings are determined not only regarding velocity, temperature, and concentration as well as nanoparticle fraction of volume but also concerning with local skin-friction coefficient, local Nusselt and general Sherwood numbers associated with nanoparticle Sherwood number. The findings of the study demonstrate that increasing the fluid suction parameter decreases the velocity and temperature of the flow field in conjunction with concentration and has a variable impact on the nanoparticle fraction of volume, despite an increasing behavior in the local skin friction coefficient and local Nusselt as well as general Sherwood numbers and an increasing behavior in the local nanoparticle Sherwood number. Furthermore, enhancing a Schmidt number leads to a reduction in the local nanoparticle Sherwood number and a rise in the nanoparticle proportion of volume. Along with concentration, it also reduces temperature and velocity. However, it also raises the local Sherwood and Nusselt numbers and reduces the local skin friction coefficient.

Preparation of FeCoNi medium entropy alloy from Fe^(3+)-Co^(2+)-Ni^(2+)solution system

In recent years,medium entropy alloys have become a research hotspot due to their excellent physical and chemical performances.By controlling reasonable elemental composition and processing parameters,the medium entropy alloys can exhibit similar properties to high entropy alloys and have lower costs.In this paper,a FeCoNi medium entropy alloy precursor was prepared via sol-gel and coprecipitation methods,respectively,and FeCoNi medium entropy alloys were prepared by carbothermal and hydrogen reduction.The phases and magnetic properties of FeCoNi medium entropy alloy were investigated.Results showed that FeCoNi medium entropy alloy was produced by carbothermal and hydrogen reduction at 1500℃.Some carbon was detected in the FeCoNi medium entropy alloy prepared by carbothermal reduction.The alloy prepared by hydrogen reduction was uniform and showed a relatively high purity.Moreover,the hydrogen reduction product exhibited better saturation magnetization and lower coercivity.

Locally Enhanced Flow and Electric Fields Through a Tip Effect for Efficient Flow‑Electrode Capacitive Deionization

Low-electrode capacitive deionization(FCDI)is an emerging desalination technology with great potential for removal and/or recycling ions from a range of waters.However,it still suffers from inefficient charge transfer and ion transport kinetics due to weak turbulence and low electric intensity in flow electrodes,both restricted by the current collectors.Herein,a new tip-array current collector(designated as T-CC)was developed to replace the conventional planar current collectors,which intensifies both the charge transfer and ion transport significantly.The effects of tip arrays on flow and electric fields were studied by both computational simulations and electrochemical impedance spectroscopy,which revealed the reduction of ion transport barrier,charge transport barrier and internal resistance.With the voltage increased from 1.0 to 1.5 and 2.0 V,the T-CC-based FCDI system(T-FCDI)exhibited average salt removal rates(ASRR)of 0.18,0.50,and 0.89μmol cm^(-2) min^(-1),respectively,which are 1.82,2.65,and 2.48 folds higher than that of the conventional serpentine current collectors,and 1.48,1.67,and 1.49 folds higher than that of the planar current collectors.Meanwhile,with the solid content in flow electrodes increased from 1 to 5 wt%,the ASRR for T-FCDI increased from 0.29 to 0.50μmol cm^(-2) min^(-1),which are 1.70 and 1.67 folds higher than that of the planar current collectors.Additionally,a salt removal efficiency of 99.89%was achieved with T-FCDI and the charge efficiency remained above 95%after 24 h of operation,thus showing its superior long-term stability.

Late effects of the treatment of childhood cancer

Excellent progress has been made in the last few decades in the cure rates of pediatric malignancies,with more than 80%of children with cancer who have access to contemporary treatment being cured.However,the therapies responsible for this survival can also produce adverse physical and psychological long-term outcomes,referred to as late effects,which appear months to years after the completion of cancer treatment.Research has shown that 60%to 90%of childhood cancer survivors(CCSs)develop one or more chronic health conditions,and 20%to 80%of survivors experience severe or life-threatening complications during adulthood.Therefore,understanding the late side effects of such treatments is important to improve the health and quality of life of the growing population of CCSs.

Novel Methodologies for Preventing Crack Propagation in Steel Gas Pipelines Considering the Temperature Effect

Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.

Relationship between parenting stress and behavioral and emotional problems in preschool children: A mediation effect analysis

BACKGROUND Emotional reactions,such as anxiety,irritability,and aggressive behavior,have attracted clinical attention as behavioral and emotional problems in preschool-age children.AIM To investigate the current status of family rearing,parental stress,and behavioral and emotional problems of preschool children and to analyze the mediating effect of the current status of family rearing on parental stress and behavioral/emo-tional problems.METHODS We use convenience sampling to select 258 preschool children in the physical examination center of our hospital from October 2021 to September 2023.The children and their parents were evaluated using a questionnaire survey.Pearson's correlation was used to analyze the correlation between child behavioral and emotional problems and parental stress and family rearing,and the structural equation model was constructed to test the mediating effect.RESULTS The score for behavioral/emotional problems of 258 preschool children was(27.54±3.63),the score for parental stress was(87.64±11.34),and the score for parental family rearing was(31.54±5.24).There was a positive correlation between the behavioral and emotional problems of the children and the“hostile/mandatory”parenting style;meanwhile,showed a negative correlation with the“support/participation”parenting style(all P<0.05).The intermediary effect value between the family upbringing of parents in parental stress and children's behavior problems was 29.89%.CONCLUSION Parental family upbringing has a mediating effect between parental stress and behavioral and emotional problems of children.Despite paying attention to the behavioral and emotional problems of preschool-age children,clinical medical staff should provide correct and reasonable parenting advice to their parents to promote the mental health of preschool-age children.

Anti-Obesity Effects of Dietary d-Allulose and Medium-Chain Triglycerides in High-Fat Diet-Fed Rats

d-Allulose, a rare sugar, exerts anti-obesity effects by inhibiting hepatic lipogenesis and promoting energy expenditure. Medium-chain triglycerides (MCTs) consist of three medium-chain fatty acids connected by glycerol. MCTs have been extensively investigated for their ability to reduce body fat accumulation. We previously investigated the anti-obesity effects of a combination of dietary d-allulose and MCT (5% - 13%) in rats;however, we could not confirm the anti-obesity effects of MCT or observed synergetic effects between d-allulose and MCT on body fat loss. We speculated that our previous studies were influenced by the excessive amount of MCT in the diets. Therefore, in this study, we aimed to investigate the anti-obesity effects of the simultaneous intake of d-allulose and MCT in rats fed an obesity-inducing high-fat diet with a low amount of MCTs (2%). Thirty-two male Wistar rats (3-week-old) were randomly divided into four groups: control, d-allulose, MCT, and d-allulose + MCT groups. Rats in each group were fed ad libitum on a control (no d-Allulose or MCT), 5% d-allulose, 2% MCT, or 5% d-allulose + 2% MCT diets for 16 weeks. Abdominal adipose tissue weights were significantly lower in the d-allulose diet group than in the control group, whereas no differences were observed between results of the MCT-supplemented groups. The total body fat mass was significantly lower in the d-allulose and MCT diet groups than in the control group, but no differences were observed between the MCT-supplemented groups. These results suggested that anti-obesity effects of dietary d-allulose were observed, and the effects of dietary MCTs were weaker than those of d-allulose. Moreover, we confirmed the interaction between dietary d-allulose and MCT on indicators of obesity. Interestingly, their effects were not synergistic, as MCT supplementation offset the anti-obesity effects of dietary d-allulose. However, the specific mechanisms underlying those effects remain unknown, warranting further investigation.

Variations in quantifying patient reported outcome measures to estimate treatment effect

In the practice of healthcare,patient-reported outcomes(PROs)and PRO measures(PROMs)are used as an attempt to observe the changes in complex clinical situations.They guide us in making decisions based on the evidence regarding patient care by recording the change in outcomes for a particular treatment to a given condition and finally to understand whether a patient will benefit from a particular treatment and to quantify the treatment effect.For any PROM to be usable in health care,we need it to be reliable,encapsulating the points of interest with the potential to detect any real change.Using structured outcome measures routinely in clinical practice helps the physician to understand the functional limitation of a patient that would otherwise not be clear in an office interview,and this allows the physician and patient to have a meaningful conver-sation as well as a customized plan for each patient.Having mentioned the rationale and the benefits of PROMs,understanding the quantification process is crucial before embarking on management decisions.A better interpretation of change needs to identify the treatment effect based on clinical relevance for a given condition.There are a multiple set of measurement indices to serve this effect and most of them are used interchangeably without clear demarcation on their differences.This article details the various quantification metrics used to evaluate the treatment effect using PROMs,their limitations and the scope of usage and implementation in clinical practice.

Effects of Genotypes and Basic Medium on Culture of Maize Mature Embryos

[Objective]This study was to screen out suitable genotypes and basic medium for the culture of maize mature embryos.[Method]Using mature embryos of nine maize genotypes as explants,the effects of genotypes and basic medium on callus induction and subculture were investigated.[Result]The genotypes performed better in callus induction and subculture were found in turn 853-35,853-209,Dan 34 and 81162.MS medium is better than N6 medium in the callus induction from maize embryos,while N6 medium is more suitable for callus subculture.[Conclusion]Our study further improved the tissue culture system in maize with mature embryos as explants.

Effects of Different Absorbing Medium on Microwave Remediation of Chlordane Contaminated Soil

Objective] This study almed to compare the effects of three absorbing medium on microwave degradation of chIordane in contaminated soiI under alkaline condition. [Method] SoiI sampIes were coI ected from the original site of a reIocated pesticide production enterprise as experimental materials, to investigate the effects of Cu2O, MnO2 and activated carbon powder as absorbing medium on soiI warming and removal rate of chIordane under alkaline condition with 20% moisture content. In addition, the effects of activated carbon as the optimal absorbing media on the removal rate of chIordane in contaminated soiI were analyzed, and the effects on the removal rate of chIordane in different weights of soiI sampIes were investigated. [Result] The effects of three different absorbing medium on the removal rates of chIordane demonstrated a descending order of activated carbon ＆gt; MnO2 ＆gt; CuO2. Under the same microwave condition, the removal rate of chIordane decreased with the increase of soiI weights, but the utiIization efficiency of microwave was improved continuousIy and tended to be stabiIized with the increase of soiI weights. [Conclu-sion] This study provided a theoretical basis for further Iarge-scale appIication in soiI remediation.

Effects of Medium Nutrients on Fusarium oxysporum Schl. f.sp

[Objective] To study the effects of different culture conditions on the Fusarium oxysporurn SchL f. sp. [Method] Based on species identification of the pathogenic organism of Fusarium oxysporum Schl. f. sp, effects of different cultures and different nutrients on the mycelial growth and conidial production of Fusarium oxysporum SchL f. sp were studied. [Result] The mycelial growth and conidial pro- duction of Fusarium oxysporum SchL f. sp was different under different culture con- ditions. PDA medium was the most suitable medium for the mycelial growth and had the highest conidial production; and the mycelial grew the fastest on the medium with maltose as carbon source or peptone as nitrogen source, which also had the highest conidial production. [Conclusion] This study provided experimental basis for the study of Fusarium oxysporum SchL f. sp and also provided theoretical basis for the study and control of Fusarium oxysporum Schl. f. sp.

Factors influencing pore-pressure prediction in complex carbonates based on effective medium theory

A calculation model based on effective medium theory has been developed for predicting elastic properties of dry carbonates with complex pore structures by integrating the Kuster-Toksǒz model with a differential method.All types of pores are simultaneously introduced to the composite during the differential iteration process according to the ratio of their volume fractions.Based on this model,the effects of pore structures on predicted pore-pressure in carbonates were analyzed.Calculation results indicate that cracks with low pore aspect ratios lead to pore-pressure overestimation which results in lost circulation and reservoir damage.However,moldic pores and vugs with high pore aspect ratios lead to pore-pressure underestimation which results in well kick and even blowout.The pore-pressure deviation due to cracks and moldic pores increases with an increase in porosity.For carbonates with complex pore structures,adopting conventional pore-pressure prediction methods and casing program designs will expose the well drilling engineering to high uncertainties.Velocity prediction models considering the influence of pore structure need to be built to improve the reliability and accuracy of pore-pressure prediction in carbonates.

Optimal design of sub-wavelength metal rectangular gratings for polarizing beam splitter based on effective medium theory

A novel optimal design of sub-wavelength metal rectangular gratings for the polarizing beam splitter （PBS） is proposed. The method is based on effective medium theory and the method of designing single layer antireflection coating. The polarization performance of PBS is discussed by rigorous couple-wave analysis （RCWA） method at a wavelength of 1550 nm. The result shows that sub-wavelength metal rectangular grating is characterized by a high reflectivity, like metal films for TE polarization, and high transmissivity, like dielectric films for TM polarization. The optimal design accords well with the results simulated by RCWA method.

A novel binary effective medium model to describe the prepeak stressstrain relationship of combined bodies of rock-like material and rock

Combined bodies of rock-like material and rock are widely encountered in geotechnical engineering,such as tunnels and mines.The existing theoretical models describing the stress-strain relationship of a combined body lack a binary feature.Based on effective medium theory,this paper presents the governing equation of the“elastic modulus”for combined and single bodies under triaxial compressive tests.A binary effective medium model is then established.Based on the compressive experiment of concretegranite combined bodies,the feasibility of determining the stress threshold based on crack axial strain is discussed,and the model is verified.The model is further extended to coal-rock combined bodies of more diverse types,and the variation laws of the compressive mechanical parameters are then discussed.The results show that the fitting accuracy of the model with the experimental curves of the concretegranite combined bodies and various types of coal-rock combined bodies are over 95%.The crack axial strain method can replace the crack volumetric strain method,which clarifies the physical meanings of the model parameters.The variation laws of matrix parameters and crack parameters are discussed in depth and are expected to be more widely used in geotechnical engineering.

Slip effects on shearing flows in a porous medium

This paper deals with the magnetohydrodynamic （MHD） flow of an Oldroyd 8-constant fluid in a porous medium when no-slip condition is no longer valid. Modified Darcy＇s law is used in the flow modelling. The non-linear differential equation with non-linear boundary conditions is solved numerically using finite difference scheme in combination with an iterative technique. Numerical results are obtained for the Couette, Poiseuille and generalized Couette flows. The effects of slip parameters on the velocity profile are discussed.

Melting heat transfer effects on stagnation point flow of micropolar fluid saturated in porous medium with internal heat generation(absorption)

The effect of melting heat transfer on the two dimensional boundary layer flow of a micropolar fluid near a stagnation point embedded in a porous medium in the presence of internal heat generation/absorption is investigated. The governing non-linear partial differential equations describing the problem are reduced to a system of non-linear ordinary differential equations using similarity transformations solved numerically using the Chebyshev spectral method. Numerical results for velocity, angular velocity and temperature profiles are shown graphically and discussed for different values of the inverse Darcy number, the heat generation/absorption parameter, and the melting parameter. The effects of the pertinent parameters on the local skin-friction coefficient, the wall couple stress, and the local Nusselt number are tabulated and discussed. The results show that the inverse Darcy number has the effect of enhancing both velocity and temperature and suppressing angular velocity. It is also found that the local skin-friction coefficient decreases, while the local Nusselt number increases as the melting parameter increases.

Effects of mother tree ages, different rooting mediums, light conditions and auxin treatments on rooting behaviour of Dalbergia sissoo branch cuttings

Dalbergia sissoo Roxb. is one of the promising multipurpose tree species of South Asia. Most of the plantations of D. sissoo from seeds are facing severe threats due to the die-back disease, which ultimately causes death of this potential tree-species within a few months. Vegetative propagation could avoid the die-back disease. Thirty mother trees of different age-groups of D. sissoo were selected for evaluating the rooting behaviour of branch cuttings from D. sissoo as influenced by auxins （IAA or IBA at 100, 200, 500 mg·L^-1）, ages of mother trees （10, 4 and 2 years old） and different environment conditions, i.e., different mediums （soil and sand） or light conditions （in shade and open condition）. The results show that application of IAA and IBA induced more numbers of cuttings （collected from 10-year-old mother trees） to root compared to control. Branch cuttings of D. sissoo collected from 10-year-old mother trees and planted in soil bed in open conditions had 100.0% of cuttings to root in IAA （100 mg·L^-1） and IBA （200 mg·L^-1） treatments. Both rooting medium （Soil and sand） influenced significantly （p〈0.05） on rooting response of branch cuttings. Soil medium was found to achieve maximum no. of branch cuttings to root, compared to sand medium.