In order to improve the hydrogenation and dehydrogenation performances of the Mg2Ni-type alloys, Mg was partially substituted by La in the alloy, and melt spinning technology was used for the preparation of the Mg20-x...In order to improve the hydrogenation and dehydrogenation performances of the Mg2Ni-type alloys, Mg was partially substituted by La in the alloy, and melt spinning technology was used for the preparation of the Mg20-xLaxNi10 （x=0, 2, 4, 6） hydrogen storage alloys. The structures of the alloys were studied by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and high-resolution transmission electron microscopy （HRTEM）. It was found that no amorphous phase formed in the as-spun La-free alloy, but the as-spun alloys containing La held a major amorphous phase. When La content x≤2, the major phase in the as-cast alloys was Mg2Ni phase, but with further increase of La content, the major phase of the as-cast alloys changed into LaNi5＋LaMg3 phase. Thermal stability of the as-spun alloys was studied by differential scanning calorimetry （DSC）, showing that spinning rate was a negligible factor on the crystallization temperature of the amorphous phase. The hydrogen absorption and desorption kinetics of the as-cast and as-spun alloys were measured using an automatically controlled Sieverts apparatus, confirming that the hydrogen absorption and desorption capacities and kinetics of the as-cast alloys clearly increased with rising La content. For La content x=2, the as-spun alloy displayed optimal hydrogen desorption kinetics at 200 ℃.展开更多
A novel asymmetric alkylaminoborazine monomer,2-propylamino-4,6-bis（methylamino）borazine,was synthesized for the first time,and directly polymerized to give a melt-spinnable polyborazine（PBN）.This asymmetric alkyl...A novel asymmetric alkylaminoborazine monomer,2-propylamino-4,6-bis（methylamino）borazine,was synthesized for the first time,and directly polymerized to give a melt-spinnable polyborazine（PBN）.This asymmetric alkylaminoborazine was synthesized by an aminolysis reaction of 2,4,6-trichloroborazine（TCB） with different amines under mild conditions.This route turns out to be much cheaper and simpler than the conventional routes.The chemical composition,structure,molecular weights and ceramic yield were investigated by EA,FTIR,NMR,GPC and TG analysis.The PBN exhibits suitable rheological property for melt-spinning, which suggests that it is a potential precursor for BN fibers.展开更多
Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible ’H-NMR spectrometer. ...Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible ’H-NMR spectrometer. High tenacity, high module fiber is prepared by melt spinning in liquid crystal phase. The effect of molecular weight, shear rate, temperature as well as spinning drawn ratio on the mechanical behavior of 60PHB / PET copolyester fiber are shown that, lower shear rate (2<sup> </sup>10 s<sup>-1</sup>), higher temperature melting （300℃ ）, lower temperature spinning （280℃ ） and higher molecular weight are favourable to the increase of the fiber mechanical properties. With the variance of drawn ratio, fiber mechanical property has a transition point due to traversion from shear-orientation to drawn-orientation. The copolyester fiber has high crystallinity, high orientation at the crystalline region, high chain orientation and high regular fibrillar structure.展开更多
Nd_(11)Fe_(71)Co_8V_(1.5)Cr_1B_(7.5) magnet was prepared by melt-spinning and subsequently annealed. The effects of the wheel speed on the magnetic properties and microstructure were studied. The results reveal that f...Nd_(11)Fe_(71)Co_8V_(1.5)Cr_1B_(7.5) magnet was prepared by melt-spinning and subsequently annealed. The effects of the wheel speed on the magnetic properties and microstructure were studied. The results reveal that fine nanocomposite microstructure consisting of Nd_2Fe_(14)B and α-Fe phases can be developed at an optimum wheel speed of about 21 m·s^(-1). After optimal annealing (640 ℃×4 min), magnetic properties of B_r=0.64 T, (()_jH_c)=903.5 kA·m^(-1) and (BH)_(max)=71 (kJ·m^(-3)) were obtained for the bonded magnets. The addition of Cr element significantly reduces grain size, increasing the intrinsic coercivity and maximum magnetic energy product.展开更多
The microstructure and electrochemical characteristics of Ml(NiCoMnAl) 5 alloys prepared by both the melt spinning method and the conventional induction melting were investigated and compared. SEM and XRD studies sh...The microstructure and electrochemical characteristics of Ml(NiCoMnAl) 5 alloys prepared by both the melt spinning method and the conventional induction melting were investigated and compared. SEM and XRD studies show that the microstructure of melt spinning alloys is columnar structure. With increasing melt spinning rate, the crystal grains become finer and preferentially grow along (111)[111] direction. The melt spinning and cast alloys belong to CaCu 5 type hexagonal crystal structure. The electrochemical measurements show that the initial capacities of melt spinning alloy electrodes are all above 210 mAh·g -1 with good activation behavior, reaching their maximum capacities after two charge discharge cycles. The maximum capacity (294 mAh·g -1 ) of melt spinning (10 m·s -1 ) alloy electrodes is as the same as that of as cast alloy electrode, and stability of charge discharge cycles of all melt spinning alloy electrodes is better than that of the as cast alloy electrodes. When charged at 600 mA·g -1 , the capacity of melt spinning (10 m·s -1 ) alloy electrode could reach 65% of its maximum capacity about 45 min with high rate discharge capability; but with the cycle number increasing, the stability of its capacity is less than that electrodes of melt spinning rate.展开更多
La-Mg-Ni alloys were prepared by melt-spinning with different cooling rates and followed by annealing.Elevation of the cooling rate leads to refinement of the grains size and increasing of the abundance of LaNis.Annea...La-Mg-Ni alloys were prepared by melt-spinning with different cooling rates and followed by annealing.Elevation of the cooling rate leads to refinement of the grains size and increasing of the abundance of LaNis.Annealing is favorable to formation of the A2 B7-type phase and promotes the discharge capacity,cycling stability and high rate discharge ability of the as-spun alloys.Phase constitution of the annealed alloys is found to be closely related to the microstructure of the as-spun alloys.A single phase A2 B7-type microstructure is obtained in the annealed alloy which is attributed to the lower abundance of the LaNis of the original alloy spun with lower cooling rate.Formation of the single phase A2 B7-type microstructure is also ascribed to the isolated and homogeneous distribution of the morphology of the as-spun alloy.The single phase alloy presents higher discharge capacity and better cycling stability compared with other annealed alloys.展开更多
In order to architecturally and functionally mimic native Extracellular Matrix （ECM）, a novel micro/nano-fibrous scaffold of hydroxyapetite/poly（lactide-co-glycolide） （HA/PLGA） composite was successfully prepare...In order to architecturally and functionally mimic native Extracellular Matrix （ECM）, a novel micro/nano-fibrous scaffold of hydroxyapetite/poly（lactide-co-glycolide） （HA/PLGA） composite was successfully prepared by melt-spinning method. A porous three-dimensional scaffold fabricated by melt-molding particulate-leaching method was used as control. This kind of scaffold comprising both nanofiber and microfiber had an original structure including a nano-network favorable for cell adhe- sion, and a micro-fiber providing a strong skeleton for support. The microfibers and nanofibers were blended homogeneously in scaffold and the compression strength reached to 6.27 MPa, which was close to human trabecular bone. The typical mi- cro/nano-fibrous structure was more benefcial for the proliferation and differentiation of Bone Mesenehymal Stem Cells （BMSCs）. The calcium deposition and Alkaline Phosphatase （ALP） activity were evaluated by the differentiation of BMSCs, and the results indicated that the temporary ECM was very beneficial for the differentiation of BMSCs into maturing osteoblasts. For repairing rabbit radius defects in vivo, micro/nano-fibrous scaffold was used for the purpose of rapid bone remodeling in the defect area. The results showed that a distinct bony callus of bridging was observed at 12 weeks post-surgery and the expression of osteogenesis-related genes （bone-morphogenetic protein-2, Osteonectin, collagen-I） increased because of the ECM-like structure. Based on the results, the novel micro/nano-fibrous scaffold might be a promising candidate for bone tissue engi- neering.展开更多
基金supported by 863 Program (2006AA05Z132)the National Natural Science Foundations of China (50871050 and 50701011)+1 种基金Natural Science Foundation of Inner Mongolia, China (200711020703)High Education Science Research Project of Inner Mongolia, China (NJzy08071)
文摘In order to improve the hydrogenation and dehydrogenation performances of the Mg2Ni-type alloys, Mg was partially substituted by La in the alloy, and melt spinning technology was used for the preparation of the Mg20-xLaxNi10 （x=0, 2, 4, 6） hydrogen storage alloys. The structures of the alloys were studied by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and high-resolution transmission electron microscopy （HRTEM）. It was found that no amorphous phase formed in the as-spun La-free alloy, but the as-spun alloys containing La held a major amorphous phase. When La content x≤2, the major phase in the as-cast alloys was Mg2Ni phase, but with further increase of La content, the major phase of the as-cast alloys changed into LaNi5＋LaMg3 phase. Thermal stability of the as-spun alloys was studied by differential scanning calorimetry （DSC）, showing that spinning rate was a negligible factor on the crystallization temperature of the amorphous phase. The hydrogen absorption and desorption kinetics of the as-cast and as-spun alloys were measured using an automatically controlled Sieverts apparatus, confirming that the hydrogen absorption and desorption capacities and kinetics of the as-cast alloys clearly increased with rising La content. For La content x=2, the as-spun alloy displayed optimal hydrogen desorption kinetics at 200 ℃.
基金support from the National 863 Program(No.2006AA03A217)
文摘A novel asymmetric alkylaminoborazine monomer,2-propylamino-4,6-bis（methylamino）borazine,was synthesized for the first time,and directly polymerized to give a melt-spinnable polyborazine（PBN）.This asymmetric alkylaminoborazine was synthesized by an aminolysis reaction of 2,4,6-trichloroborazine（TCB） with different amines under mild conditions.This route turns out to be much cheaper and simpler than the conventional routes.The chemical composition,structure,molecular weights and ceramic yield were investigated by EA,FTIR,NMR,GPC and TG analysis.The PBN exhibits suitable rheological property for melt-spinning, which suggests that it is a potential precursor for BN fibers.
文摘Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible ’H-NMR spectrometer. High tenacity, high module fiber is prepared by melt spinning in liquid crystal phase. The effect of molecular weight, shear rate, temperature as well as spinning drawn ratio on the mechanical behavior of 60PHB / PET copolyester fiber are shown that, lower shear rate (2<sup> </sup>10 s<sup>-1</sup>), higher temperature melting （300℃ ）, lower temperature spinning （280℃ ） and higher molecular weight are favourable to the increase of the fiber mechanical properties. With the variance of drawn ratio, fiber mechanical property has a transition point due to traversion from shear-orientation to drawn-orientation. The copolyester fiber has high crystallinity, high orientation at the crystalline region, high chain orientation and high regular fibrillar structure.
文摘Nd_(11)Fe_(71)Co_8V_(1.5)Cr_1B_(7.5) magnet was prepared by melt-spinning and subsequently annealed. The effects of the wheel speed on the magnetic properties and microstructure were studied. The results reveal that fine nanocomposite microstructure consisting of Nd_2Fe_(14)B and α-Fe phases can be developed at an optimum wheel speed of about 21 m·s^(-1). After optimal annealing (640 ℃×4 min), magnetic properties of B_r=0.64 T, (()_jH_c)=903.5 kA·m^(-1) and (BH)_(max)=71 (kJ·m^(-3)) were obtained for the bonded magnets. The addition of Cr element significantly reduces grain size, increasing the intrinsic coercivity and maximum magnetic energy product.
文摘The microstructure and electrochemical characteristics of Ml(NiCoMnAl) 5 alloys prepared by both the melt spinning method and the conventional induction melting were investigated and compared. SEM and XRD studies show that the microstructure of melt spinning alloys is columnar structure. With increasing melt spinning rate, the crystal grains become finer and preferentially grow along (111)[111] direction. The melt spinning and cast alloys belong to CaCu 5 type hexagonal crystal structure. The electrochemical measurements show that the initial capacities of melt spinning alloy electrodes are all above 210 mAh·g -1 with good activation behavior, reaching their maximum capacities after two charge discharge cycles. The maximum capacity (294 mAh·g -1 ) of melt spinning (10 m·s -1 ) alloy electrodes is as the same as that of as cast alloy electrode, and stability of charge discharge cycles of all melt spinning alloy electrodes is better than that of the as cast alloy electrodes. When charged at 600 mA·g -1 , the capacity of melt spinning (10 m·s -1 ) alloy electrode could reach 65% of its maximum capacity about 45 min with high rate discharge capability; but with the cycle number increasing, the stability of its capacity is less than that electrodes of melt spinning rate.
基金Project supported by the National Natural Science Foundation of China(51761032,51501095)the University Foundation of Inner Mongolia(NJZZ18142)Natural Science Foundation of Inner Mongolia(2018MS05040)
文摘La-Mg-Ni alloys were prepared by melt-spinning with different cooling rates and followed by annealing.Elevation of the cooling rate leads to refinement of the grains size and increasing of the abundance of LaNis.Annealing is favorable to formation of the A2 B7-type phase and promotes the discharge capacity,cycling stability and high rate discharge ability of the as-spun alloys.Phase constitution of the annealed alloys is found to be closely related to the microstructure of the as-spun alloys.A single phase A2 B7-type microstructure is obtained in the annealed alloy which is attributed to the lower abundance of the LaNis of the original alloy spun with lower cooling rate.Formation of the single phase A2 B7-type microstructure is also ascribed to the isolated and homogeneous distribution of the morphology of the as-spun alloy.The single phase alloy presents higher discharge capacity and better cycling stability compared with other annealed alloys.
基金This research was financially supported by Na- tional Natural Science Foundation of China （Projects 51103149, 51273195 and 51321062）.
文摘In order to architecturally and functionally mimic native Extracellular Matrix （ECM）, a novel micro/nano-fibrous scaffold of hydroxyapetite/poly（lactide-co-glycolide） （HA/PLGA） composite was successfully prepared by melt-spinning method. A porous three-dimensional scaffold fabricated by melt-molding particulate-leaching method was used as control. This kind of scaffold comprising both nanofiber and microfiber had an original structure including a nano-network favorable for cell adhe- sion, and a micro-fiber providing a strong skeleton for support. The microfibers and nanofibers were blended homogeneously in scaffold and the compression strength reached to 6.27 MPa, which was close to human trabecular bone. The typical mi- cro/nano-fibrous structure was more benefcial for the proliferation and differentiation of Bone Mesenehymal Stem Cells （BMSCs）. The calcium deposition and Alkaline Phosphatase （ALP） activity were evaluated by the differentiation of BMSCs, and the results indicated that the temporary ECM was very beneficial for the differentiation of BMSCs into maturing osteoblasts. For repairing rabbit radius defects in vivo, micro/nano-fibrous scaffold was used for the purpose of rapid bone remodeling in the defect area. The results showed that a distinct bony callus of bridging was observed at 12 weeks post-surgery and the expression of osteogenesis-related genes （bone-morphogenetic protein-2, Osteonectin, collagen-I） increased because of the ECM-like structure. Based on the results, the novel micro/nano-fibrous scaffold might be a promising candidate for bone tissue engi- neering.
