期刊文献+
共找到12,551篇文章
< 1 2 250 >
每页显示 20 50 100
Meningioma originating from the superior petrosal vein without dural attachment:A case report
1
作者 Yeong-Jin Kim Shin Jung +2 位作者 Tae-Young Jung Kyung-Sub Moon In-Young Kim 《World Journal of Clinical Cases》 SCIE 2024年第17期3156-3160,共5页
BACKGROUND Meningioma in the cerebellopontine angle(CPA)without dural attachment is extremely rare.We report a unique case of meningioma derived from the superior petrosal vein without dural attachment.CASE SUMMARY A ... BACKGROUND Meningioma in the cerebellopontine angle(CPA)without dural attachment is extremely rare.We report a unique case of meningioma derived from the superior petrosal vein without dural attachment.CASE SUMMARY A 44-year-old right-handed woman presented with a two-month history of headache and tinnitus.Brain magnetic resonance imaging showed a well-defined contrast-enhancing lesion in the right CPA without a dural tail sign.Tumor resection was performed using a right retro sigmoid approach.A dural attachment was not seen at the tentorium or posterior surface of the petrous pyramid.The tumor was firmly adherent to the superior petrosal vein.The origin site was cauterized and resected with the preservation of the superior petrosal vein.A diagnosis of meningothelial meningioma was made.The patient’s headache and tinnitus gradually disappeared,and a recurrence was not observed five years after the surgery.CONCLUSION The rare occurrence of meningioma without dural attachment makes it difficult to determine dural attachment before surgery.The absence of dural attachment makes it easy to completely resect such tumors.Vessels related to tumors should be removed carefully,considering the possible presence of tumor stem cells in the microvessels. 展开更多
关键词 meningioma Dura mater superior petrosal vein Tumor stem cell Case report
下载PDF
Surgical Management of a Collision Tumor: The Association of Intracranial Meningioma and Macroadenoma
2
作者 Salma Abbas Yao Christian Hugues Dokponou +4 位作者 Thameen Jaradat Mahjouba Boutarbouch Nadia Cherradi Hafsa El Ouazzani Abdessamad El Ouahabi 《Open Journal of Modern Neurosurgery》 2024年第1期48-56,共9页
Background: The simultaneous presence of a pituitary adenoma and a meningioma is a rare and underreported condition. The randomly encountered cases need to be reported to further allow our understanding of this collis... Background: The simultaneous presence of a pituitary adenoma and a meningioma is a rare and underreported condition. The randomly encountered cases need to be reported to further allow our understanding of this collision tumors that are still not understood nor fully described. Patients and Method: We report a case of coexisting nonfunctioning pituitary adenoma and a left temporal lobe meningioma revealed by a 1-year history of progressive vision loss and occasional headaches in a 56-year-old woman. Her clinical condition worsened in the last 5 months with ptosis, cavernous sinus syndrome, and ophthalmoplegia of the right eye without papilledema. There was an improvement in the visual symptoms after subtotal resection of both lesions through a right frontotemporal craniotomy. Histology confirmed a collision tumor. The patient was referred for adjuvant treatment with gamma knife radiosurgery. He was doing well and back to his usual duties 6 months later. Conclusion: A gross total or subtotal resection with adjuvant therapy is the gold standard for the surgical management of collision tumors for a favorable patient outcome. 展开更多
关键词 Collision Tumors meningioma Pituitary Adenoma
下载PDF
改进YOLOv5su模型检测桃树缩叶病
3
作者 姚凌云 周俊峰 李丽 《农业工程学报》 EI CAS CSCD 北大核心 2024年第14期109-117,共9页
为实现自然环境下桃树缩叶病的检测,该研究提出了一种基于YOLOv5su的桃树缩叶病识别改进模型DLLYOLOv5su。首先,针对桃树缩叶病目标特征变化较大的问题,在骨干网络最后一层C3模块中加入可变形自注意力模块(deformable attention,DA),使... 为实现自然环境下桃树缩叶病的检测,该研究提出了一种基于YOLOv5su的桃树缩叶病识别改进模型DLLYOLOv5su。首先,针对桃树缩叶病目标特征变化较大的问题,在骨干网络最后一层C3模块中加入可变形自注意力模块(deformable attention,DA),使模型更加关注目标区域,降低背景对模型的影响,提高模型在复杂背景下的拟合能力。其次在SPPF(fast spatial pyramid pooling)模块中引入LSKA(large separable kernel attention)结构,大核卷积增大了模型的感受野,使模型能够关注更多信息。最后,提出了LAWD(lightweight adaptive weighted downsampling)模块,使用轻量化的下采样结构替换卷积模块,减少计算开销。在桃树缩叶病数据集上进行试验,结果显示,DLL-YOLOv5su模型权重大小为17.6 MB,检测速度为83帧/s。识别准确率P、召回率R和平均精度均值mAP_(50)分别达到了80.7%、73.1%和80.4%,相较于原始YOLOv5su分别提高了4.2、2.4和4.3个百分点。与YOLOv3-tiny、Faster R-CNN、YOLOv7和YOLOv8相比mAP_(50)分别高出了28.5、11.8、2.1和4.1个百分点。改进模型识别精度高,误检、漏检率低,检测速度满足实时检测的要求,可以为桃树缩叶病的实时监测和预警提供参考。 展开更多
关键词 图像处理 病害 缩叶病 目标检测 YOLOv5su 可变形自注意力 大核卷积 轻量化
下载PDF
小麦SUS基因家族鉴定与生物信息学分析
4
作者 孔斌雪 李娜 +5 位作者 马靖福 窦佳欣 陈涛 张沛沛 刘媛 杨德龙 《云南农业大学学报(自然科学版)》 CAS CSCD 北大核心 2024年第1期1-8,共8页
【目的】对小麦蔗糖合成酶(sucrose synthase,SUS)基因家族进行鉴定和生物信息学分析,为探究小麦SUS(TaSUS)基因家族的作用机制提供理论参考。【方法】采用生物信息学方法在小麦全基因组上鉴定TaSUS基因家族成员,并对其系统进化关系、... 【目的】对小麦蔗糖合成酶(sucrose synthase,SUS)基因家族进行鉴定和生物信息学分析,为探究小麦SUS(TaSUS)基因家族的作用机制提供理论参考。【方法】采用生物信息学方法在小麦全基因组上鉴定TaSUS基因家族成员,并对其系统进化关系、染色体位置、基因结构、保守结构域、启动子顺式作用元件和基因表达模式进行分析。【结果】在小麦基因组中共鉴定到分布于14条染色体上的24个TaSUS基因,可分为3个亚组。TaSUS基因含有多个外显子,但部分基因缺失非翻译区结构。TaSUS基因家族成员启动子区域包含45种顺式作用元件,涉及植物生长发育和逆境胁迫响应。大多数TaSUS基因在小麦穗中显著表达,在叶、茎和根中的相对表达量较低。【结论】研究结果有助于了解小麦SUS基因家族的进化,为后期小麦SUS基因家族的生物功能研究奠定理论基础。 展开更多
关键词 小麦 蔗糖合成酶(suS) 生物信息学分析 基因表达
下载PDF
温度对SUS410/BNi-2/Hastelloy X钎焊接头界面组织及力学性能的影响
5
作者 付伟 孙浩 +2 位作者 陈兴东 宋晓国 胡胜鹏 《精密成形工程》 北大核心 2024年第10期124-130,共7页
目的针对汽封部件的高质量制造需求,系统研究了温度对SUS410/BNi-2/Hastelloy X钎焊接头微观组织及力学性能的影响。方法将以SUS410/BNi-2/Hastelloy X搭接结构装配的试样放入真空炉中在不同温度(1060~1140℃)下进行钎焊连接,利用SEM和... 目的针对汽封部件的高质量制造需求,系统研究了温度对SUS410/BNi-2/Hastelloy X钎焊接头微观组织及力学性能的影响。方法将以SUS410/BNi-2/Hastelloy X搭接结构装配的试样放入真空炉中在不同温度(1060~1140℃)下进行钎焊连接,利用SEM和EDS等手段分析钎料与母材之间的相互作用,测试接头的力学性能并分析接头断裂行为,研究温度对接头界面组织演化和力学性能的影响。结果钎缝主要由Ni(s,s)与Cr-B相组成,B元素扩散进入两侧母材,在晶界处聚集形成硼化物相。随着钎焊温度的升高,钎缝中富Cr的硼化物和浅灰色Ni(s,s)相消失,形成均匀的Ni(s,s)组织,两侧母材中B元素扩散深度增加。随着钎焊温度不断升高,钎焊接头的抗剪强度逐渐上升,上升到某一强度后,温度继续升高,但强度反而下降,断裂位置由钎缝中心先转移至Hastelloy X基体,随着温度继续升高,断裂位置又转移至SUS410扩散区。断裂形式由脆性断裂转变为韧性断裂。结论采用BNi-2黏带钎料实现了SUS410与Hastelloy X合金的可靠连接,接头典型界面组织为SUS410/扩散区((Fe,Cr)+(Fe,Cr)-B)/钎缝区(Ni(s,s)+Cr-B+β_(1)-phases)/扩散区(γ-phase+(Cr,Ni)-B+(Cr,Ni,Mo)-B)/Hastelloy X;钎焊接头的最大抗剪强度为235.6 MPa(1100℃)。 展开更多
关键词 suS410 Hastelloy X 真空钎焊 界面组织 力学性能
下载PDF
Pulsed current-assisted twelve-roll precision rolling deformation of SUS304 ultra-thin strips with exceptional mechanical properties 被引量:1
6
作者 Wanwan Fan Tao Wang +3 位作者 Jinxiong Hou Zhongkai Ren Qingxue Huang Guanghui Wu 《International Journal of Extreme Manufacturing》 SCIE EI CAS CSCD 2024年第4期291-305,共15页
Innovative pulsed current-assisted multi-pass rolling tests were conducted on a 12-roll mill during the rolling deformation processing of SUS304 ultra-thin strips.The results show that in the first rolling pass,the ro... Innovative pulsed current-assisted multi-pass rolling tests were conducted on a 12-roll mill during the rolling deformation processing of SUS304 ultra-thin strips.The results show that in the first rolling pass,the rolling reduction rate of a conventionally rolled sample(at room temperature)is 33.8%,which can be increased to 41.5%by pulsed current-assisted rolling,enabling the formation of an ultra-thin strip with a size of 67.3μm in only one rolling pass.After three passes of pulsed current-assisted rolling,the thickness of the ultra-thin strip can be further reduced to 51.7μm.To clearly compare the effects of a pulsed current on the microstructure and mechanical response of the ultra-thin strip,ultra-thin strips with nearly the same thickness reduction were analyzed.It was found that pulsed current can reduce the degree of work-hardening of the rolled samples by promoting dislocation detachment,reducing the density of stacking faults,inhibiting martensitic phase transformation,and shortening the total length of grain boundaries.As a result,the ductility of ultra-thin strips can be effectively restored to approximately 16.3%while maintaining a high tensile strength of 1118 MPa.Therefore,pulsed current-assisted rolling deformation shows great potential for the formation of ultra-thin strips with a combination of high strength and ductility. 展开更多
关键词 pulsedcurrent-assisted suS304 ultra-thinstrip rolling reductionrate WORK-HARDENING mechanical properties
下载PDF
SU电器产品的差异化营销策略研究
7
作者 石雪萍 段琪 《市场周刊》 2024年第23期51-54,共4页
文章围绕SU电器平台展开差异化营销策略优化探讨,通过深入分析SU电器平台的市场定位和发展现状,提出了针对性优化建议。SU电器应充分利用自身资源优势,通过提升产品品质和服务水平,加强品牌宣传和推广,探索多元化的渠道拓展方式,以形成... 文章围绕SU电器平台展开差异化营销策略优化探讨,通过深入分析SU电器平台的市场定位和发展现状,提出了针对性优化建议。SU电器应充分利用自身资源优势,通过提升产品品质和服务水平,加强品牌宣传和推广,探索多元化的渠道拓展方式,以形成规模效应,提升市场竞争力。同时,SU电器还应注重市场变化和消费者需求的变化,持续优化营销策略,实现可持续发展。 展开更多
关键词 su电器 差异化 营销策略
下载PDF
SUS321不锈钢表面Cr/CrN涂层的制备与抗氧化及耐腐蚀研究
8
作者 张林嘉 卢婷 +2 位作者 李恒 李亚茹 许海龙 《热加工工艺》 北大核心 2024年第6期149-156,共8页
采用磁控溅射技术,在SUS321不锈钢表面制备Cr/Cr N涂层,利用扫描电子显微镜(SEM)、X射线衍射仪(XRD)及分析天平等分别表征样品高温氧化及酸性盐雾腐蚀实验后的微结构及增重。结果表明,当磁控溅射气体分压比为P_(Ar)/P_(N_(2))=3∶1的涂... 采用磁控溅射技术,在SUS321不锈钢表面制备Cr/Cr N涂层,利用扫描电子显微镜(SEM)、X射线衍射仪(XRD)及分析天平等分别表征样品高温氧化及酸性盐雾腐蚀实验后的微结构及增重。结果表明,当磁控溅射气体分压比为P_(Ar)/P_(N_(2))=3∶1的涂层样品抗氧化性能及耐腐蚀性能最佳。在此基础上通过循环沉积制备了多层Cr/CrN涂层,6周期涂层样品在600℃氧化200 h后的单位面积增重为3.599 g/m^(2),表面氧化膜致密,没有出现剥落现象;6周期的涂层样品在酸性盐雾环境中能够保持480 h表面无变化,在放置500 h后边缘部位才开始出现轻微锈迹。固定磁控溅射气体分压比为P_(Ar)/P_(N_(2))=3∶1时,制备的6周期Cr/CrN多层膜涂层具有最佳的抗氧化及耐酸性盐雾腐蚀性能。 展开更多
关键词 suS321不锈钢 磁控溅射 Cr/CrN涂层 抗氧化性能 耐腐蚀性能
下载PDF
从小米SU7爆火看雷军十八般营销武艺 被引量:1
9
作者 张少辉 《企业管理》 2024年第5期67-70,共4页
近日,小米汽车SU7重磅发布,根据小米汽车官方信息,4分钟内完成大定10000辆,27分钟实现50000辆,24小时达88898辆。小米汽车旗开得胜,它像鲶鱼一样,无形中搅动了新能源汽车市场。雷军的营销能力有目共睹,这一仗让他再创辉煌。小米汽车面... 近日,小米汽车SU7重磅发布,根据小米汽车官方信息,4分钟内完成大定10000辆,27分钟实现50000辆,24小时达88898辆。小米汽车旗开得胜,它像鲶鱼一样,无形中搅动了新能源汽车市场。雷军的营销能力有目共睹,这一仗让他再创辉煌。小米汽车面世用到了18个经典营销原理,其具体做法对营销人员具有借鉴意义。 展开更多
关键词 小米汽车 su7 雷军 营销理论 客户思维
下载PDF
Differentiating consistency of meningioma based on grey-level histogram analysis of T2WI
10
作者 ZHOU Fengyu HAN Tao +4 位作者 LIU Xianwang DONG Wenjie LU Ting WANG Yuanyuan ZHOU Junlin 《中国医学影像技术》 CSCD 北大核心 2024年第8期1151-1155,共5页
Objective To observe the value of grey-level histogram analysis based on T2WI for differentiating consistency of meningioma.Methods Data of 109 patients with meningioma were retrospectively analyzed.The patients were ... Objective To observe the value of grey-level histogram analysis based on T2WI for differentiating consistency of meningioma.Methods Data of 109 patients with meningioma were retrospectively analyzed.The patients were divided into hard group(n=71)and soft group(n=38)according to the consistency of tumors.Tumor ROI was outlined on axial T2WI showing the largest tumor section,gray levels were extracted and histogram analysis was performed.The value of each histogram parameter were compared between groups.Then receiver operating characteristic curve was drawn,and the area under the curve(AUC)was calculated to evaluate the efficiency for differentiating soft and hard meningioma.Results P 1,P 10,P 50,P 90,P 99 and the mean grey levels on T2WI in soft group were all higher than those in hard group(all P<0.05),while the variance,the kurtosis and the skewness were not significantly different between groups(all P>0.05).The differentiating efficiency of P 1,P 10,P 50,P 90,P 99 and the mean grey levels on T2WI were all fine,with AUC of 0.774 to 0.833,and no significant difference was found(all P>0.05).Conclusion Parameters of grey-level histogram analysis such as P 1,P 10,P 50,P 90,P 99 and the mean values based on T2WI were all valuable for differentiating soft and hard meningioma. 展开更多
关键词 meningioma CONSISTENCY magnetic resonance imaging
下载PDF
厚壁SUS321焊接工艺研究
11
作者 李晓峰 黄超 《锅炉制造》 2024年第1期46-49,共4页
SUS321是含有稳定化元素Ti的奥氏体型不锈钢,在锅炉和石化容器产品中有着广泛应用。厚壁SUS321在应用中较为少见,其埋弧焊焊接工艺的应用及厚壁条件下的试板成形需要经过验证,其各项性能也需得到保证。通过焊接工艺试验,对厚壁SUS321不... SUS321是含有稳定化元素Ti的奥氏体型不锈钢,在锅炉和石化容器产品中有着广泛应用。厚壁SUS321在应用中较为少见,其埋弧焊焊接工艺的应用及厚壁条件下的试板成形需要经过验证,其各项性能也需得到保证。通过焊接工艺试验,对厚壁SUS321不锈钢试板进行工艺性检验,并对试板进行力学性能、微观组织等检验。最终证明用于厚壁SUS321国产埋弧焊焊丝工艺性良好,各项性能均满足使用要求。 展开更多
关键词 不锈钢埋弧焊 suS321 焊接工艺试验
下载PDF
SUS430LX冷弯裂纹缺陷分析与控制
12
作者 程云霞 《甘肃冶金》 2024年第2期100-104,共5页
冷弯开裂是一种材料加工性能类缺陷,针对SUS430LX冷弯开裂缺陷,采用扫描电镜和能谱分析检测了冷弯部位及基体析出相情况。从检测分析结果来看,析出相是引起冷弯开裂的主要原因。围绕断面不同位置析出相的特点,对影响析出相尺寸、数量及... 冷弯开裂是一种材料加工性能类缺陷,针对SUS430LX冷弯开裂缺陷,采用扫描电镜和能谱分析检测了冷弯部位及基体析出相情况。从检测分析结果来看,析出相是引起冷弯开裂的主要原因。围绕断面不同位置析出相的特点,对影响析出相尺寸、数量及类型的主要因素进行了讨论,并提出优化方向。 展开更多
关键词 suS430LX 冷弯开裂 析出相 析出顺序 冷却强度
下载PDF
Primary pulmonary meningioma and minute pulmonary meningothelial-like nodules: Rare pulmonary nodular lesions requiring more awareness in clinical practice
13
作者 Li-Dan Liu Ke-Xin Zhang +2 位作者 Hai-Ning Zhang Yi-Wen Zheng Hong-Tao Xu 《World Journal of Clinical Cases》 SCIE 2024年第11期1857-1862,共6页
In this editorial,we comment on an article by Ruan et al published in a recent issue of the World Journal of Clinical Case.Pulmonary meningothelial proliferative lesions,including primary pulmonary meningiomas,minute ... In this editorial,we comment on an article by Ruan et al published in a recent issue of the World Journal of Clinical Case.Pulmonary meningothelial proliferative lesions,including primary pulmonary meningiomas,minute pulmonary meningothelial-like nodules,and metastatic pulmonary meningiomas are rare pulmonary lesions.These lesions are difficult to differentiate from lung cancers based on clinical and imaging manifestations.Herein,we briefly introduce the clinical,imaging,and pathological characteristics of these lesions and discuss their pathogenesis to strengthen the current understanding of pulmonary meningothelial proliferative lesions in clinical diagnosis and therapy. 展开更多
关键词 Pulmonary meningothelial proliferation Primary pulmonary meningioma Minute pulmonary meningothelial-like nodule Lung neoplasm Rare pulmonary nodular lesion
下载PDF
Bilateral Middle Fossa Floor Meningiomas Invading the Middle Ear
14
作者 Nuwan T. Meegalla Malini Suresh Nair Michele Marie Gandolfi 《International Journal of Otolaryngology and Head & Neck Surgery》 2024年第5期373-377,共5页
This case is a 49-year-old female patient who presented with suspected eustachian tube dysfunction symptoms that were refractory to medical treatment. She presented with conductive hearing loss and aural fullness on t... This case is a 49-year-old female patient who presented with suspected eustachian tube dysfunction symptoms that were refractory to medical treatment. She presented with conductive hearing loss and aural fullness on the left. A physical exam revealed an epitympanic fleshy mass in the middle ear with effusion. Imaging with MRI and CT showed opacification of the epitympanum with surrounding bony demineralization bilaterally left greater than right and significant thinning versus dehiscence of the tegmen mastoideum and tympani on the left with only thinning of the tegmen on the right. An MR temporal bone with and without contrast, demonstrated enhancement of the left middle ear extending to the tegmen and corresponding enhancement of the dura along the floor of the left middle cranial fossa as well as extending along foramen ovale into the infratemporal fossa. There was to a lesser degree similar appearance on the right. A biopsy of the middle ear mass on the left revealed meningioma. This case highlights the need to widen your differential with common symptoms when they are refractory to treatment. 展开更多
关键词 Conductive Hearing Loss Multifocal meningioma Middle Ear meningioma
下载PDF
An Alternative Mechanism for the Instant Removal of Hypervascular Anaplastic Meningioma with Recovery of Mentality with NaCl + KCl
15
作者 Chur Chin 《Case Reports in Clinical Medicine》 2024年第7期213-218,共6页
Background: There is limited information regarding adjuvant treatment for malignant meningiomas. Although external whole-brain irradiation is recommended, the patient’s family in our case rejected this modality. Nota... Background: There is limited information regarding adjuvant treatment for malignant meningiomas. Although external whole-brain irradiation is recommended, the patient’s family in our case rejected this modality. Notably, traditional chemotherapy was ineffective. Aim: I speculated if the exfoliation of graphene could disassemble the three-dimensional (3D) structures of the graphene because the tumor mass or the blood clots including the graphene consisted of inhomogeneous materials. Therefore, I aimed to explore another possible mechanism for the instant removal of inhomogeneous materials. Method: Herein, I report a case of anaplastic papillary meningioma. A 59- year-old man presented with partial complex seizures and recurrent headaches following craniotomy for the removal of a mass with a right frontotemporal convexity 10 years ago. Computed tomography (CT) and magnetic resonance imaging demonstrated a right frontotemporal mass with diffuse contrast enhancement and extensive surrounding edema. A right frontotemporal flap was performed. The tumor and the infiltrated dura were removed, but massive intraoperative bleeding occurred and the right middle cerebral artery was clipped at the M2 territory. Postoperatively, the follow-up CT scan revealed hydrocephalus. Accordingly, a ventriculoperitoneal shunt was placed. The patient suffered from left hemiplegia as a sequela of intraoperative bleeding. Four months later, the follow-up CT scan showed chronic epidural hematoma in the right frontotemporoparietal region. The patient also had an altered level of consciousness. Results: The patient’s level of consciousness was restored after infusion of a NaCl + KCl solution with instant disappearance of the mass. Conclusion: There may be another mechanism for disassembling the inhomogeneous graphene-containing complex, such as quantum fluctuation of the graphene exfoliation with pair annihilation or relation to tissue engineering by the graphene. 展开更多
关键词 Malignant meningioma Colloid Gold Camostat Mesylate No Radiotherapy No Recurrence
下载PDF
日本SUS630不锈钢洁净度分析
16
作者 陈炜 《特钢技术》 CAS 2024年第2期37-41,共5页
本文对日本某钢厂模铸生产的两种传感器用SUS630不锈钢进行了洁净度分析。结果表明:SUS630不锈钢棒材中夹杂物类型主要为氧化物O-Al-Ca-Mg,少部分夹杂物为O-Al-Ca-Mg-S;SUS630不锈钢板材中夹杂物类型主要为氧化物O-Mg-Al-Si-Mn,少部分... 本文对日本某钢厂模铸生产的两种传感器用SUS630不锈钢进行了洁净度分析。结果表明:SUS630不锈钢棒材中夹杂物类型主要为氧化物O-Al-Ca-Mg,少部分夹杂物为O-Al-Ca-Mg-S;SUS630不锈钢板材中夹杂物类型主要为氧化物O-Mg-Al-Si-Mn,少部分夹杂物为O-Mn-Al-Si-Ti、O-Mn-Si-Al-Ca;它们的夹杂物形貌均为球形或近球形。棒材、板材中夹杂物密度、平均等效直径、面积占比分别为:26/mm^(2)、3.1μm、0.024%,以及:29/mm^(2)、2.3μm、0.013%;棒材的夹杂物评级结果为细系B1.0、细系D1.0,板材的夹杂物评级结果为细系B0.5、细系D1.0,两材料的洁净度整体控制水平较高;此外,钢中还存在超细微Nb(C,N)夹杂物。 展开更多
关键词 suS630不锈钢 夹杂物 洁净度 Nb(C N)
下载PDF
SUS441不锈钢/Al金属间化合物微叠层复合板的界面结构与力学性能
17
作者 黄蔚泓 袁文铮 +4 位作者 吴宇星 刘淳熙 满达 魏振雄 祖国胤 《有色金属材料与工程》 CAS 2024年第1期59-65,共7页
采用“表面预处理—交替层叠—热轧复合—热处理”的工艺流程制备了SUS441不锈钢/Al金属间化合物微叠层复合板。利用光学显微镜、X射线衍射仪、扫描电子显微镜等检测与表征方法研究了热处理温度对复合板界面形貌、微观组织、物相组成、... 采用“表面预处理—交替层叠—热轧复合—热处理”的工艺流程制备了SUS441不锈钢/Al金属间化合物微叠层复合板。利用光学显微镜、X射线衍射仪、扫描电子显微镜等检测与表征方法研究了热处理温度对复合板界面形貌、微观组织、物相组成、维氏硬度、拉伸性能的影响。结果表明:复合板界面结合良好;热处理后,固–液反应界面氧化严重,易导致界面分层而开裂;固–固、固–半固、固–液热处理后,金属间化合物层由均匀层和两相层组成,均匀层的物相组成为Fe_(2)A_(15),两相层的物相组成为Fe_(4)Al_(13)和Al_(13)Cr_(2),且两相层具有韧性特征,固–半固反应所得到的复合板的综合力学性能最佳。 展开更多
关键词 suS441不锈钢/Al 微叠层复合板 热轧复合 合金化 界面
下载PDF
Calculation of the Standard Model Parameters and Particles Based on a SU(4) Preon Model
18
作者 Jan Helm 《Journal of Modern Physics》 2024年第1期64-124,共61页
This paper describes an extension and a new foundation of the Standard Model of particle physics based on a SU(4)-force called hyper-color, and on preon subparticles. The hyper-color force is a generalization of the S... This paper describes an extension and a new foundation of the Standard Model of particle physics based on a SU(4)-force called hyper-color, and on preon subparticles. The hyper-color force is a generalization of the SU(2)-based weak interaction and the SU(1)-based right-chiral self-interaction, in which the W-and the Z-bosons are Yukawa residual-field-carriers of the hyper-color force, in the same sense as the pions are the residual-field-carriers of the color SU(3) interaction. Using the method of numerical minimization of the SU(4)-action based on this model, the masses and the inner structure of leptons, quarks and weak bosons are calculated: the mass results are very close to the experimental values. We calculate also precisely the value of the Cabibbo angle, so the mixing matrices of the Standard model, CKM matrix for quarks and PMNS matrix for neutrinos can also be calculated. In total, we reduce the 29 parameters of the Standard Model to a total of 7 parameters. 展开更多
关键词 su(4) Generalization of Weak Interaction Extension of Standard Model Numerical Minimization of Action Hyper-Color Preon
下载PDF
SUS430/Q355/SUS430不锈钢-碳钢复合板非真空试制开发
19
作者 唐东 王宝君 《甘肃冶金》 2024年第3期114-117,共4页
利用松下YC-400TX电焊机、Φ450 mm热轧实验机组等设备试制开发SUS430/Q355/SUS430不锈钢-碳钢非真空复合钢板,并对其进行了宏观低倍、微观金相组织、复合处元素扩散以及力学性能等检测分析。结果表明:SUS430/Q355/SUS430非真空热轧复... 利用松下YC-400TX电焊机、Φ450 mm热轧实验机组等设备试制开发SUS430/Q355/SUS430不锈钢-碳钢非真空复合钢板,并对其进行了宏观低倍、微观金相组织、复合处元素扩散以及力学性能等检测分析。结果表明:SUS430/Q355/SUS430非真空热轧复合钢板结合强度好,生产工艺合理,并对试制过程易出现的问题提出了改进措施。 展开更多
关键词 suS430/Q355/suS430 不锈钢-碳钢 热轧 复合板 非真空
下载PDF
小米SU7动力电池系统剖析
20
作者 刘晓明 徐东静 《汽车维修技师》 2024年第13期37-40,共4页
一、规格(1)小米SU7 700km后驱长续航智驾版和700km后驱标准创始版为弗迪磷酸铁锂73.6k W·h刀片电池(如表1所示)。(2)小米SU7 830km后驱超长续航高阶智驾Pro版为宁德时代磷酸铁锂94.3k W·h神行电池(如表2所示)。(3)小米SU780... 一、规格(1)小米SU7 700km后驱长续航智驾版和700km后驱标准创始版为弗迪磷酸铁锂73.6k W·h刀片电池(如表1所示)。(2)小米SU7 830km后驱超长续航高阶智驾Pro版为宁德时代磷酸铁锂94.3k W·h神行电池(如表2所示)。(3)小米SU7800km四驱超长续航高阶智驾Max和小米SU7750km四驱Max创始版为宁德时代三元锂101k W·h麒麟电池(如表3所示)。 展开更多
关键词 磷酸铁锂 小米 四驱 su 宁德
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部