The pore structures and electrochemical performances of mesoporous carbons prepared by silica sol template method as electrode material for supercapacitor were investigated. The mean pore size and mass specific capaci...The pore structures and electrochemical performances of mesoporous carbons prepared by silica sol template method as electrode material for supercapacitor were investigated. The mean pore size and mass specific capacitance of the mesoporous carbons increase with the increase of mass ratio of silica sol to carbon source （glucose）. A modified template method, combining silica sol template method and ZnCl2 chemical activation method, was proposed to improve the mass specific capacitance of the mesoporous carbon with an improved BET surface area. The correlation of rate capability and pore structure was studied by constant current discharge and electrochemical impedance spectroscopy. A commercially available microporous carbon was used for comparison. The result shows that mesoporous carbon with a larger pore size displays a higher rate capability. Mesoporous carbon synthesized by modified template method has both high mass specific capacitance and good rate capability.展开更多
The activation effect of boric acid as an activator is good,and we investigate the best activation conditions for the boric acid impregnation method.To represent the structural characteristics and adsorption performan...The activation effect of boric acid as an activator is good,and we investigate the best activation conditions for the boric acid impregnation method.To represent the structural characteristics and adsorption performance of the Stellera Chamaejasme based carbon molecular sieves,we use Brunner-Emmet-Teller(BET)measurements,scan-ning electron microscope(SEM),Raman spectra(Raman),X-ray diffraction(XRD),and adsorption property measurement.When the loading ratio was 0.68:1,the specific surface area was 532.21 m^(2)/g,the total pore volume was 0.24 cm 3/g,the average pore size was 1.81 nm,the adsorption value of methylene blue was 145.28 mg/g,and the adsorption value of iodine was 713.33 mg/g,the results showed that boric acid had better activation effect.The carbon molecular sieves made from Stellera Chamaejasme and activated with boric acid produce two peaks on the aperture distribution graph that are densely distributed in the micropore range.This indicates that boric acid’s pore-forming tendency is primarily micropore.展开更多
Highly dispersed carbon microspheres(CMSs)derived from D-xylose were successfully synthesized under hydrothermal conditions and followed by further carbonization,in which F127 was used as a soft template.As-synthesize...Highly dispersed carbon microspheres(CMSs)derived from D-xylose were successfully synthesized under hydrothermal conditions and followed by further carbonization,in which F127 was used as a soft template.As-synthesized products were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),flourier transform infrared spectroscopy(FT-IR),thermal gravimetric(TG)and X-ray diffraction(XRD).The results showed that the morphology and structure of the CMSs prominently depended on the stirring speed during hydrothermal reaction.The resultant CMSs principally had non-porous structure without stirring and had a very smooth surface.When the stirring speed increased to 200 rpm,the synthesized mesoporous carbon microspheres at 220?C for 24 h(CMSs-5)had a uniform size distribution of 1–1.4μm and a specific surface area of 452 m^2/g.Nevertheless,with further increasing to 400 rpm,as-fabricated carbon products were mostly amorphous with a low degree of sphericity.Results demonstrated that the diameter of the products decreased with the increase of stirring speed.Furthermore,the sphericity product yield of CMSs reduced with the increase of stirring speed.XRD result showed that all the obtained samples contained partial graphite phase.In addition,a formation mechanism was proposed that involved polymerization product as the precursors for microsphere formation.The controllable and green strategy may provide a great convenience to study properties and applications of carbon microspheres.展开更多
文摘The pore structures and electrochemical performances of mesoporous carbons prepared by silica sol template method as electrode material for supercapacitor were investigated. The mean pore size and mass specific capacitance of the mesoporous carbons increase with the increase of mass ratio of silica sol to carbon source （glucose）. A modified template method, combining silica sol template method and ZnCl2 chemical activation method, was proposed to improve the mass specific capacitance of the mesoporous carbon with an improved BET surface area. The correlation of rate capability and pore structure was studied by constant current discharge and electrochemical impedance spectroscopy. A commercially available microporous carbon was used for comparison. The result shows that mesoporous carbon with a larger pore size displays a higher rate capability. Mesoporous carbon synthesized by modified template method has both high mass specific capacitance and good rate capability.
基金Graduate Innovation Project of Qinghai University for Nationalities(2021XJXS12)Graduate Innovation Project of Qinghai University for Nationalities(12M2021018).
文摘The activation effect of boric acid as an activator is good,and we investigate the best activation conditions for the boric acid impregnation method.To represent the structural characteristics and adsorption performance of the Stellera Chamaejasme based carbon molecular sieves,we use Brunner-Emmet-Teller(BET)measurements,scan-ning electron microscope(SEM),Raman spectra(Raman),X-ray diffraction(XRD),and adsorption property measurement.When the loading ratio was 0.68:1,the specific surface area was 532.21 m^(2)/g,the total pore volume was 0.24 cm 3/g,the average pore size was 1.81 nm,the adsorption value of methylene blue was 145.28 mg/g,and the adsorption value of iodine was 713.33 mg/g,the results showed that boric acid had better activation effect.The carbon molecular sieves made from Stellera Chamaejasme and activated with boric acid produce two peaks on the aperture distribution graph that are densely distributed in the micropore range.This indicates that boric acid’s pore-forming tendency is primarily micropore.
基金supported financially by the Outstanding Youth Science Fund of Shaanxi Province(No.2018JC-028)the fund of Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics,Beijing Technology and Business University(No.51772243)+1 种基金the Innovation Team Plan of Shaanxi Province(No.2017KCT-17)the National Natural Science Foundation of China(No.51772243).
文摘Highly dispersed carbon microspheres(CMSs)derived from D-xylose were successfully synthesized under hydrothermal conditions and followed by further carbonization,in which F127 was used as a soft template.As-synthesized products were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),flourier transform infrared spectroscopy(FT-IR),thermal gravimetric(TG)and X-ray diffraction(XRD).The results showed that the morphology and structure of the CMSs prominently depended on the stirring speed during hydrothermal reaction.The resultant CMSs principally had non-porous structure without stirring and had a very smooth surface.When the stirring speed increased to 200 rpm,the synthesized mesoporous carbon microspheres at 220?C for 24 h(CMSs-5)had a uniform size distribution of 1–1.4μm and a specific surface area of 452 m^2/g.Nevertheless,with further increasing to 400 rpm,as-fabricated carbon products were mostly amorphous with a low degree of sphericity.Results demonstrated that the diameter of the products decreased with the increase of stirring speed.Furthermore,the sphericity product yield of CMSs reduced with the increase of stirring speed.XRD result showed that all the obtained samples contained partial graphite phase.In addition,a formation mechanism was proposed that involved polymerization product as the precursors for microsphere formation.The controllable and green strategy may provide a great convenience to study properties and applications of carbon microspheres.
