期刊文献+
共找到43篇文章
< 1 2 3 >
每页显示 20 50 100
Synthesis, Characterization of Mesoporous Al-Mg Composite Oxide and Catalytic Performance for Oxyethylation of Fatty Alcohol 被引量:1
1
作者 SONG Wei-ming DENG Qi-gang +1 位作者 ZHOU De-rui ZHAO De-feng 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2005年第5期601-605,共5页
A mesoporous Al-Mg composite oxide with a hexagonal structure was synthesized with aluminium nitrate and magnesium nitrate as the reagents and sodium dodecyl sulfate(SDS) as the template in the presence of ethylened... A mesoporous Al-Mg composite oxide with a hexagonal structure was synthesized with aluminium nitrate and magnesium nitrate as the reagents and sodium dodecyl sulfate(SDS) as the template in the presence of ethylenediamine. The XRD, nitrogen adsorption-desorption and TEM studies indicate that the composite has a hexagonal framework structure and an average pore diameter of 2. 6 nm. The TG/DTA spectra indicate that the decomposition and the removal of the occluded surfactant of the sample take place in a range of 230-550 ℃. The mesoporous Al-Mg composite oxide exhibites a highly catalytic activity for the oxyethylation of fatty alcohols. Narrow-range distributed ethoxylates are formed in the presence of the mesoporous Al-Mg composite oxide catalyst. The distribution selectivity coefficient(Cx) is 24 when the mesoporous Al-Mg composite oxide was used as a catalyst for the oxyethylation of octanol and the average adduct degree of ethoxylates is 6. 4. 展开更多
关键词 mesoporous Al-Mg composites oxide CHARACTERIZATION Oxyethylation Narrow-range distribution
下载PDF
Synthesis,Characterization and Catalytic Properties of Mesoporous HPMo/SiO_2 Composite 被引量:1
2
作者 颜学敏 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2008年第6期834-838,共5页
A novel mesoporous HPMo/SiO2 composite was synthesized by the sol-gel method with triblock copolymer EO20PO70EO20 as template.The properties of the product were characterized by X-ray diffraction,transmission electron... A novel mesoporous HPMo/SiO2 composite was synthesized by the sol-gel method with triblock copolymer EO20PO70EO20 as template.The properties of the product were characterized by X-ray diffraction,transmission electron microscopy,N2 adsorption-desorption isotherms,Fourier transform infrared spectrometer and inductively-coupled plasma analysis.The experimental results show that the product has a very ordered hexagonal mesostructure,and the HPMo is immobilized into the framework of silica.The final mesoporous composite shows excellent stability in polar solvents.Results of catalytic tests indicate that the composite is an effective catalyst for oxidation of dibenzothiophen,and there are few activity losses even after the third cycle of uses.The high catalytic activity and good insolubility make it a promising catalyst in oxidative desulfurization process. 展开更多
关键词 mesoporous composite phosphomolybdic acid CATALYST oxidative desulfurization
下载PDF
Synthesis and Characterization of Worm-shaped Tubular Lanthanum Aluminum Composite Mesoporous Materials 被引量:1
3
作者 宋伟明 左春玲 邓启刚 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2011年第1期70-75,共6页
镧铝 mesoporous 材料被超声的热水的方法作为一个模板代理人用钠 dodecyl 硫酸盐综合。产生样品被低角度X光检查描绘衍射( XRD ), N2 吸附解吸附作用研究,传播电子显微镜学( TEM )和表面形态学分析( SEM ),表面酸( NH3-TPD ), redu... 镧铝 mesoporous 材料被超声的热水的方法作为一个模板代理人用钠 dodecyl 硫酸盐综合。产生样品被低角度X光检查描绘衍射( XRD ), N2 吸附解吸附作用研究,传播电子显微镜学( TEM )和表面形态学分析( SEM ),表面酸( NH3-TPD ), reducibility 性质( TPR ),X光检查精力散分光计(版本)和 thermogravimetric 分析( TG/DTG )。Al/La 合成 mesoporous 材料与 n (艾尔) 被综合:n (La ) 70:1.0, 80 ? 楤慳癤湡慴敧? 展开更多
关键词 复合介孔材料 材料合成 蠕虫状 材料特性 复合管 十二烷基硫酸钠 透射电子显微镜
下载PDF
Superior anti-corrosion and self-healing bi-functional polymer composite coatings with polydopamine modified mesoporous silica/graphene oxide 被引量:5
4
作者 Yanqi Ma Haowei Huang +8 位作者 Hongda Zhou Michael Graham James Smith Xinxin Sheng Ying Chen Li Zhang Xinya Zhang Elena Shchukina Dmitry Shchukin 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2021年第36期95-104,共10页
In this article,graphene oxide(GO)and benzotriazole-loaded mesoporous silica nanoparticles(BTA/MSNs)are combined on micro scale through the in situ polymerization of polydopamine(PDA),preparing a selfhealing bi-functi... In this article,graphene oxide(GO)and benzotriazole-loaded mesoporous silica nanoparticles(BTA/MSNs)are combined on micro scale through the in situ polymerization of polydopamine(PDA),preparing a selfhealing bi-functional GO(fGO)used as nano-fillers for anti-corrosion enhancement of waterborne epoxy(WEP)coatings.Scanning electronic microscopy(SEM)images show that the BTA/MSNs are uniformly distributed on the surface of high aspect ratio GO nanosheets to endow GO nanocontainer characteristics.UV-vis profiles demonstrate that fGO has p H-controlled release function.Modulus at lowest frequency is generally used for comparing the corrosion resistance of organic coatings.Modulus at lowest frequency(1.42×10^(5)Ωcm^(2))after 30 days immersion in 3.5 wt.%Na Cl solution revealed 2 orders of magnitude higher that of blank WEP(1.17×10^(7)Ωcm^(2)).With artificial cracks on its coatings,fGO/WEP had no obvious rust compared with blank WEP after 240 h of immersion.We anticipate that self-healing and physical barrier bi-functional nanocontainers improve the traditional anticorrosion coating efficiency with better,longer-lasting performance for shipping,oil drilling or bridge maintenance. 展开更多
关键词 mesoporous silica Graphene oxide ANTI-CORROSION SELF-HEALING Functional composite coatings
原文传递
Mechanism of pore formation and structural characterization for mesoporous Mg-Al composite oxides 被引量:1
5
作者 赵芸 矫庆泽 段雪 《Science China Chemistry》 SCIE EI CAS 2002年第1期37-45,共9页
Mg-AI layered double hydroxides (LDH) with different particle sizes were prepared using different aging times at high supersaturation by a new method developed in our laboratory. The key features of this method are a ... Mg-AI layered double hydroxides (LDH) with different particle sizes were prepared using different aging times at high supersaturation by a new method developed in our laboratory. The key features of this method are a very rapid mixing and nucleation process followed by a separate aging process. By calcination of LDH at 500癈, mesoporous Mg-AI composite oxides with an extremely narrow pore size distribution were produced. The crystal structure of the Mg-AI composite oxides was a multiphasic one consisting of MgO-like crystals and a layered material. 展开更多
关键词 LAYERED double HYDRoxide MG-AL composite oxide mesoporE crystal structure.
原文传递
Synthesis of mesoporous CeO_2-MnO_x binary oxides and their catalytic performances for CO oxidation 被引量:9
6
作者 詹望成 张欣烨 +3 位作者 郭杨龙 王丽 郭耘 卢冠忠 《Journal of Rare Earths》 SCIE EI CAS CSCD 2014年第2期146-152,共7页
Mesoporous CeO2-MnOx binary oxides with different Mn/Ce molar ratios were prepared by hydrothermal synthesis and characterized by scanning electron microscopy (SEM), N2 sorption, X-ray diffraction (XRD), X-ray pho... Mesoporous CeO2-MnOx binary oxides with different Mn/Ce molar ratios were prepared by hydrothermal synthesis and characterized by scanning electron microscopy (SEM), N2 sorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and H2 temperature-programmed reduction (H2-TPR). The characterization results indicated that the CeO2-MnOx catalysts exhibited flower-like microspheres with high specific surface areas, and partial Mn cations could be incorporated into CeO2 lattice to form solid solution. The CeO2-MnOx catalysts showed better catalytic activity for CO oxidation than that prepared by the coprecipitation method. Furthermore, the CeO2-MnOx catalyst with Mn/Ce molar ratio of 1 in the synthesis gel (Ce-Mn-1) exhibited the best catalytic activity, over which the conversion of CO could achieve 90% at 135 ℃. This was ascribed to presence of more Mn species with higher oxida- tion state on the surface and the better reducibility over the Ce-Mn-I catalyst than other CeO2-MnOx catalysts. 展开更多
关键词 mesoporous composite oxides CERIA manganese oxide hydrothermal synthesis CO oxidation rare earths
原文传递
Existing Form of Zinc Oxide and Phase Transformation for Zinc Oxide Encapsulated in Mesoporous Silica 被引量:1
7
作者 Qingshan Lu Guohong Yun +1 位作者 Wenping Zhou Jiangong Li 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2013年第9期841-845,共5页
Nanocomposites of ZnO encapsulated in mesoporous silica were prepared by wetness impregnation and calcination. The samples were characterized by X-ray diffraction, transmission electron microscopy, nitrogen adsorption... Nanocomposites of ZnO encapsulated in mesoporous silica were prepared by wetness impregnation and calcination. The samples were characterized by X-ray diffraction, transmission electron microscopy, nitrogen adsorption-desorption isotherms, and X-ray photoelectron spectroscopy. The effects of ZnO content and thermal treatment on the existing form of ZnO as well as phase transformation were investigated. ZnO exists stably in the form of non-crystalline phase or cluster when crystallite size is small. With increasing ZnO content, as the size of ZnO reaches a critical size of crystalline phase, the non-crystalline ZnO or cluster transforms structurally to crystalline ZnO with low energy state. Besides, Zn2Si04 was obtained by solid-state reaction between ZnO and rnesoporous silica. The mesoporous silica acts as not only a reactant but also a diffusion barrier which inhibits the phase transformation from ^-Zn2Si04 to ^-Zn2Si04. The formation temperature of Zn2Si04 is lower than that of conventional solid-state reaction because of the unique structure of mesoporous silica. 展开更多
关键词 Zinc oxide mesoporous silica Solid-state reaction compositeS Zinc silicate
原文传递
复合介孔材料磷钼酸/二氧化硅的合成及其催化性能 被引量:7
8
作者 颜学敏 雷家珩 +1 位作者 米远祝 高林 《现代化工》 CAS CSCD 北大核心 2009年第1期45-48,共4页
合成了一种新型磷钼酸/二氧化硅(HPMo/SiO2)复合介孔材料。在酸性条件合成介孔SiO2的过程中直接加入磷钼酸,磷钼酸通过与硅羟基的氢键作用结合并随着硅物种的缩聚而固载在SiO2骨架上。研究结果表明HPMo分子均匀地包藏到介孔SiO2网络组... 合成了一种新型磷钼酸/二氧化硅(HPMo/SiO2)复合介孔材料。在酸性条件合成介孔SiO2的过程中直接加入磷钼酸,磷钼酸通过与硅羟基的氢键作用结合并随着硅物种的缩聚而固载在SiO2骨架上。研究结果表明HPMo分子均匀地包藏到介孔SiO2网络组成的孔壁中。该材料在有机硫化物二苯并噻吩的氧化反应中具有很高的催化活性和良好的重复使用性能。 展开更多
关键词 磷钼酸 复合介孔材料 氧化脱硫 催化剂
下载PDF
介孔/大孔Al_2O_3-SiO_2复合氧化物的制备与表征 被引量:8
9
作者 吴俊升 李晓刚 +1 位作者 杜伟 董超芳 《催化学报》 SCIE CAS CSCD 北大核心 2006年第9期755-761,共7页
以正硅酸甲酯和硝酸铝为硅和铝的前驱体,以非离子表面活性剂C16EO10为结构导向剂,采用溶胶-凝胶法制备了双孔结构硅铝复合氧化物材料.扫描电镜和N2吸附/脱附分析表明,材料具有三维连续大孔和骨架介孔的双孔分布结构.微米范围的连续大孔... 以正硅酸甲酯和硝酸铝为硅和铝的前驱体,以非离子表面活性剂C16EO10为结构导向剂,采用溶胶-凝胶法制备了双孔结构硅铝复合氧化物材料.扫描电镜和N2吸附/脱附分析表明,材料具有三维连续大孔和骨架介孔的双孔分布结构.微米范围的连续大孔结构是由于溶胶-凝胶过程中诱发了Spinodal相分离所致,而骨架介孔的形成则可能是由于表面活性剂分子进入凝胶骨架中,起到构建介孔结构的模板作用.骨架元素分析结果表明,制备过程中添加的铝大部分进入了凝胶骨架中,取代部分硅而形成酸性硅铝复合氧化物.采用Hammett指示剂法和吡啶吸附红外光谱法分析了材料的表面固体酸性,结果显示,硅铝复合氧化物属于中强酸,酸强度H0在-5·6^-3·0之间的酸中心数约为0·35mmol/g,并且材料表面的L酸位较为丰富,B酸位相对较少. 展开更多
关键词 氧化硅 氧化铝 复合氧化物 溶胶-凝胶 相分离 模板剂 介孔 大孔
下载PDF
CuO/CeO_2复合介孔材料的合成及抗菌性能研究 被引量:2
10
作者 陈丰 刘成宝 +3 位作者 李萍 卢传凯 汤文杰 陈志刚 《苏州科技学院学报(自然科学版)》 CAS 2014年第1期43-47,共5页
以三嵌段共聚物P123为模板,通过溶剂蒸发诱导自组装技术(EISA),以硝酸铈和硝酸铜为原料,合成CuO/CeO2稀土复合抗菌材料,比较了无机原料摩尔比对产物微观结构和抗菌性能的影响。当CuO/CeO2比例等于0.15∶0.85时,复合材料为固溶体材料,且... 以三嵌段共聚物P123为模板,通过溶剂蒸发诱导自组装技术(EISA),以硝酸铈和硝酸铜为原料,合成CuO/CeO2稀土复合抗菌材料,比较了无机原料摩尔比对产物微观结构和抗菌性能的影响。当CuO/CeO2比例等于0.15∶0.85时,复合材料为固溶体材料,且比表面积最大为125.7 m2·g-1,抗菌缓释时间最长达66 h以上。当氧化铜含量升高后,氧化铜从固溶体中析出,大大缩短了抗菌的缓释时间;当氧化铜含量降低时,复合材料的比表面积随之减少,影响了长效抗菌性能。 展开更多
关键词 氧化铜 氧化铈 复合介孔材料 抗菌性能
下载PDF
镍铝复合介孔氧化物的合成和表征 被引量:1
11
作者 宋伟明 刘芳 邓启刚 《石油化工高等学校学报》 CAS 2009年第4期9-12,共4页
以阴离子表面活性剂为模板剂,硝酸铝为铝源,氯化镍为镍源,水热超声法合成镍铝复合介孔氧化物。当n(Ni)/n(Al)=1∶7,反应温度80℃,反应时间28 h,晶化12 h,样品有较规则的介孔结构。用X射线多晶衍射(XRD)、红外光谱(IR)、N2吸附-脱附、NH3... 以阴离子表面活性剂为模板剂,硝酸铝为铝源,氯化镍为镍源,水热超声法合成镍铝复合介孔氧化物。当n(Ni)/n(Al)=1∶7,反应温度80℃,反应时间28 h,晶化12 h,样品有较规则的介孔结构。用X射线多晶衍射(XRD)、红外光谱(IR)、N2吸附-脱附、NH3和CO2程序升温脱附(NH3-TPD和CO2-TPD)、程序升温氧化还原(TPO和TPR)等方法对样品进行了表征。结果表明,样品具有典型的介孔结构特征,孔径分布较窄,平均孔径2.6 nm,孔容积0.216 cm3/g,比表面积为297.132?/g。样品具有弱和强的酸碱中心,340℃可被氧化,430℃可被还原。 展开更多
关键词 镍铝复合氧化物 介孔材料 合成 表征
下载PDF
镁铝复合介孔氧化物催化月桂酸甲酯乙氧基化反应 被引量:1
12
作者 宋伟明 周兴业 邓启刚 《石油化工》 CAS CSCD 北大核心 2009年第5期536-540,共5页
以十二烷基硫酸钠为模板剂、乙二胺为碱性介质,采用水热法合成了镁铝复合介孔氧化物(MMAO),采用氮吸附-脱附、X射线衍射、程序升温脱附和热重-差热分析等方法对MMAO进行了表征,并考察了MMAO在月桂酸甲酯乙氧基化反应中的催化性能。表征... 以十二烷基硫酸钠为模板剂、乙二胺为碱性介质,采用水热法合成了镁铝复合介孔氧化物(MMAO),采用氮吸附-脱附、X射线衍射、程序升温脱附和热重-差热分析等方法对MMAO进行了表征,并考察了MMAO在月桂酸甲酯乙氧基化反应中的催化性能。表征结果显示,合成的MMAO具有介孔结构特征,平均孔径为3.2nm,比表面积为280m2/g,孔体积为0.18cm3/g。实验结果表明,MMAO催化剂在月桂酸甲酯乙氧基化反应中具有较高的催化活性,适宜的合成条件为:反应温度180℃、初始压力0.6~0.7MPa、MMAO催化剂用量为月桂酸甲酯质量的3%。在此条件下得到的月桂酸甲酯聚氧乙烯醚的相对分子质量分布较窄,当环氧乙烷平均聚合度为5时,月桂酸甲酯聚氧乙烯醚的相对分子质量分布选择性系数为18.50。 展开更多
关键词 镁铝复合介孔氧化物 乙氧基化 催化 月桂酸甲酯 环氧乙烷 月桂酸甲酯聚氧乙烯醚
下载PDF
中空介孔碳化钨微球载钯催化剂对甲酸电催化性能(英文) 被引量:1
13
作者 郭圣达 胡仙超 +2 位作者 羊建高 陈颢 周阳 《燃料化学学报》 EI CAS CSCD 北大核心 2016年第6期698-702,共5页
采用喷雾干燥法和还原炭化处理制备具有中空介孔结构的碳化钨钴复合粉(HTCCS),其中,钴的质量含量为6%。在碳化钨钴复合粉表面的钴和氯化钯发生置换反应,得到纳米Pd/WC复合催化剂。采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM... 采用喷雾干燥法和还原炭化处理制备具有中空介孔结构的碳化钨钴复合粉(HTCCS),其中,钴的质量含量为6%。在碳化钨钴复合粉表面的钴和氯化钯发生置换反应,得到纳米Pd/WC复合催化剂。采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)对样品的形貌和晶型结构进行了表征。结果表明,5.0-6.0 nm钯纳米粒子取代钴均匀分布在碳化钨微球表面。采用循环伏安和计时电流法研究了在酸性溶液中Pd/WC催化剂对甲酸的电催化氧化性能,结果表明,Pd/WC催化剂比Pd/C催化剂对甲酸呈现出更高的电催化氧化活性和稳定性。 展开更多
关键词 直接甲酸燃料电池 甲酸氧化 碳化钨 电催化 介孔材料
下载PDF
非负载介孔Co-M0-Al_2O_3催化剂的制备及其加氢脱氧性能
14
作者 王欣 张舜光 +1 位作者 段艳 侯凯湖 《化学反应工程与工艺》 CAS CSCD 北大核心 2010年第4期338-343,共6页
采用热沉淀法制备了非负载介孔 Co-Mo-Al_2O_3复合氧化物催化剂,利用X射线衍射(XRD)、扫描电子显微镜(SEM)和N_2吸附-脱附等方法分析了焙烧温度和超声振荡对催化剂微观结构的影响,并以苯酚为探针分子,在连续流动固定床反应器上考察了催... 采用热沉淀法制备了非负载介孔 Co-Mo-Al_2O_3复合氧化物催化剂,利用X射线衍射(XRD)、扫描电子显微镜(SEM)和N_2吸附-脱附等方法分析了焙烧温度和超声振荡对催化剂微观结构的影响,并以苯酚为探针分子,在连续流动固定床反应器上考察了催化剂的加氢脱氧性能。结果表明:非负载介孔Co-Mo-Al_2O_3复合氧化物催化剂具有较窄的孔径分布(最可几孔径3.9 nm)和良好的苯酚加氢脱氧活性;在热沉淀过程中辅以超声振荡可有效控制催化剂的粒径尺寸、均匀度和介孔结构,可使催化剂的比表面积提高约50%,使苯酚的加氢脱氧活性提高约45%。 展开更多
关键词 非负载催化剂 Co-Mo-A1_2O_3复合氧化物 介孔结构 加氢脱氧
下载PDF
SBA-15/UP原位复合材料摩擦性能的研究
15
作者 潘冬明 韦春 +4 位作者 刘红霞 余传柏 党晓东 李肖建 苏乐 《现代塑料加工应用》 CAS 北大核心 2012年第1期1-4,共4页
采用KH570对介孔二氧化硅SBA-15进行表面处理,通过原位聚合方法合成SBA-15/不饱和聚酯(UP)复合树脂,后再通过共混、辊炼、模压成型制备了SBA-15/UP复合材料。研究了加入SBA-15对SBA-15/UP复合材料的摩擦磨损性能、硬度、动态力学性能的... 采用KH570对介孔二氧化硅SBA-15进行表面处理,通过原位聚合方法合成SBA-15/不饱和聚酯(UP)复合树脂,后再通过共混、辊炼、模压成型制备了SBA-15/UP复合材料。研究了加入SBA-15对SBA-15/UP复合材料的摩擦磨损性能、硬度、动态力学性能的影响,通过扫描电子显微镜(SEM)对复合材料的磨损表面形貌进行观察。结果表明,经改性后的SBA-15加入使复合材料的体积磨损率降低了26%,玻璃化温度提高了16℃。 展开更多
关键词 介孔二氧化硅 不饱和聚酯 原位复合材料 摩擦性能 动态力学性能
下载PDF
介孔纳米氧化铜/聚偏氟乙烯复合膜的制备和性能研究
16
作者 纪秀杰 晁俭 +2 位作者 马立杰 单榕 刘超 《河南科技大学学报(自然科学版)》 CAS 北大核心 2022年第6期93-99,M0008,共8页
为了改善聚偏氟乙烯(PVDF)膜的亲水性、分离渗透性能、热稳定性和机械性能,首先采用自主开发的醋酸铜自模板(醋酸铜既是铜源又是模板剂)合成介孔纳米氧化铜(CuO),并将其与PVDF复合制备了不同介孔纳米CuO添加量的介孔纳米氧化铜/聚偏氟乙... 为了改善聚偏氟乙烯(PVDF)膜的亲水性、分离渗透性能、热稳定性和机械性能,首先采用自主开发的醋酸铜自模板(醋酸铜既是铜源又是模板剂)合成介孔纳米氧化铜(CuO),并将其与PVDF复合制备了不同介孔纳米CuO添加量的介孔纳米氧化铜/聚偏氟乙烯(CuO/PVDF)复合膜。通过X射线衍射仪(XRD)、扫描电子显微镜(SEM)和热重分析仪(TGA)等仪器对复合膜进行分析表征,并对复合膜的亲水性、分离渗透性能和机械性能进行测试。研究结果表明:加入一定量的介孔纳米CuO有助于复合膜内部指状孔的形成,并且提高了复合膜的热稳定性能。介孔纳米CuO添加量为0.18 g时,复合膜的综合性能最好。接触角由105°降低到72°,实现了疏水膜到亲水膜的转变。孔隙率最大为83.2%,纯水通量是PVDF原膜的1.2倍。拉伸强度最大为0.704 MPa,断裂伸长率最大为170.26%。 展开更多
关键词 聚偏氟乙烯 介孔 纳米氧化铜 复合膜 性能
下载PDF
介孔碳负载纳米晶二氧化锡复合超电容材料的电化学性能
17
作者 赵尧敏 杨新丽 《中原工学院学报》 CAS 2008年第2期20-23,共4页
利用介孔氧化硅分子筛SBA-15作为硬模板、蔗糖作为碳源制备介孔碳CMK-3,并用浸渍法负载纳米晶二氧化锡得到复合超电容材料CMK-3-SnO2.通过循环伏安、计时电位及循环充放电技术研究了复合材料的超电容性能,结果表明复合超电容材料显示出... 利用介孔氧化硅分子筛SBA-15作为硬模板、蔗糖作为碳源制备介孔碳CMK-3,并用浸渍法负载纳米晶二氧化锡得到复合超电容材料CMK-3-SnO2.通过循环伏安、计时电位及循环充放电技术研究了复合材料的超电容性能,结果表明复合超电容材料显示出优异的电化学稳定性和理想的电容性质. 展开更多
关键词 介孔碳 二氧化锡 复合材料 超级电容器
下载PDF
介孔铈锆氧化物的制备及表征
18
作者 吴洪达 陈中繇 《应用化工》 CAS CSCD 北大核心 2019年第8期1882-1886,1896,共6页
为了探讨催化剂的活性氧储量与催化剂组成和结构的关系,以Ce^4+、Zr^4+混合液为基本原料,NaOH溶液为沉淀剂,CTAB为模板剂,制备了Ce^4+与Zr^4+比例不同的系列铈锆复合氧化物,通过BET、H2-TPR和XRD对制备的铈锆复合氧化物进行了表征。结... 为了探讨催化剂的活性氧储量与催化剂组成和结构的关系,以Ce^4+、Zr^4+混合液为基本原料,NaOH溶液为沉淀剂,CTAB为模板剂,制备了Ce^4+与Zr^4+比例不同的系列铈锆复合氧化物,通过BET、H2-TPR和XRD对制备的铈锆复合氧化物进行了表征。结果表明,Ce/Zr≤2/3的铈锆复合氧化物具有四方相结构特征,Ce/Zr=1的铈锆复合氧化物具有立方相结构特征;都是典型的介孔材料,有高的比表面积,最大值达到185.7m^2/g;程序升温测试表明,铈锆复合氧化物在450℃和650℃附近有两个耗氢还原峰,分别对应于表面Ce^4+的还原和体相Ce^4+的还原;活性氧储量0.148~0.84molO2/mol(Ce+Zr),具有良好的可逆吸氧和释氧性质;活性氧储量不仅与材料的组成有关,也与材料的晶体结构有关,与材料的比表面积成正比。 展开更多
关键词 铈锆复合氧化物 比表面积 介孔 储氧
下载PDF
ZnO-CMK复合物的合成及在锂电池中的应用
19
作者 丁晓坤 《合肥工业大学学报(自然科学版)》 CAS CSCD 北大核心 2015年第6期842-845,共4页
文章利用介孔碳(mesoporous carbon,CMK)作为反应载体,通过低温水热法合成ZnO-CMK复合物,并利用XRD和透射电子显微镜对材料进行了结构和形貌的表征。通过电化学实验可知,ZnO-CMK复合物作为锂离子电池负极材料具有较高的容量,循环稳定值... 文章利用介孔碳(mesoporous carbon,CMK)作为反应载体,通过低温水热法合成ZnO-CMK复合物,并利用XRD和透射电子显微镜对材料进行了结构和形貌的表征。通过电化学实验可知,ZnO-CMK复合物作为锂离子电池负极材料具有较高的容量,循环稳定值达到410mA·h/g,库伦效率高达95%以上。与商业ZnO电极材料相比,其充放电性能和循环稳定性得到了较大的提高。结果表明,经过介孔碳复合改性后的ZnO-CMK复合物可以作为一种有效的锂离子电池负极材料加以研究和应用。 展开更多
关键词 氧化锌 介孔碳 复合物 负极材料 库伦效率
下载PDF
壳壁上具有介孔的Si/Al复合氧化物中空微球的制备 被引量:6
20
作者 姜艳秋 刘艳华 +3 位作者 赵旭 赵敬哲 田玉美 王子忱 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2005年第6期1018-1020,共3页
Hollow spheres of Si/Al composite oxide with mesopores in the shell wall were prepared by combining O/W/O emulsion with sol-gel process. In this study, TEOS and aluminum isopropylate were used as silicon resource and ... Hollow spheres of Si/Al composite oxide with mesopores in the shell wall were prepared by combining O/W/O emulsion with sol-gel process. In this study, TEOS and aluminum isopropylate were used as silicon resource and aluminum resource, respectively. As an additive, PEG-20000 was added into the inorganic precursors. TEM and N2 adsorption-desorption isotherms indicate the presence of mesopores with uniform pore size in the shell wall. The diameter, shell thickness and hollow structure property of the spheres were characterized by transmission polarized light microscopy and SEM. ()27Al MAS NMR spectrum shows that the coordinated number of the aluminum species is four. The influences on special morphology under different oil phase and reaction temperature were also investigated. The hollow spheres exhibit high thermal stability and can remain their intact spherical structures even after calcination at 550 ℃ for 6 h. This strategy can be extended to synthesize hollow spheres of other binary composite oxide with mesopores. 展开更多
关键词 中空球 复合氧化物 介孔 热稳定性
下载PDF
上一页 1 2 3 下一页 到第
使用帮助 返回顶部