In modem manufacturing, a new type of sheet metal part with step cross-section in both inner hole and outer edge is proposed. The traditional stamping separating processes can only produce sheet metal part with vertic...In modem manufacturing, a new type of sheet metal part with step cross-section in both inner hole and outer edge is proposed. The traditional stamping separating processes can only produce sheet metal part with vertical cross-section. According to the latest developing theory and potential of cold pressure forming： combination of pressure and cold forging, a new flow control forming of sheet metal（FCF） is excogitated based on blanking process of general stamping and combined with cold forging processes such as extrusion and coining, etc, which is aiming at the above-mentioned new type of sheet metal part. With utilization of this new process, the new type of sheet metal parts can be manufactured. In order to shorten the testing period, the numerical simulation was carried out by using DEFORM-3D software, and both deformation and mechanics rules were analyzed. Based on the simulation, both punching part and blanked parts of this new type were successfully developed. Then a new conception of optimal distance between the step walls of inner hole and outside edge was proposed and the design principle for its numerical value was inferred. Furthermore, a mold set for combination of stamping ＆ cold forging was designed and manufactured, by which the technologic experiments were taken for validation with Aluminum plate of thickness 2.35 mm for power battery cover board, which verified the principle of the distance between the step walls. The research of cold pressure forming of thin sheet metal with step cross-section is significant, not only to the development of modem mechanical manufacture, but also to metal plastic forming science.展开更多
Metallic ion-cross-linked polymer of intrinsic microporosity(PIM-1) thin-film composite(TFC) membranes supported on an ultraviolet(UV)-cross-linked porous substrate were fabricated. The UV-cross-linked porous substrat...Metallic ion-cross-linked polymer of intrinsic microporosity(PIM-1) thin-film composite(TFC) membranes supported on an ultraviolet(UV)-cross-linked porous substrate were fabricated. The UV-cross-linked porous substrate was prepared via polymerization-induced phase separation. The PIM-1 TFC membranes were fabricated via a dip-coating procedure. Metallic ion-cross-linked PIM-1 TFC membranes were fabricated by hydrolyzing the PIM-1 TFC membrane in an alkali solution and then cross-linking it in a multivalent metallic ion solution. The pore size and porous structures were evaluated by low-temperature N_2 adsorption–desorption analysis. The membrane structure was investigated by field-emission scanning electron microscopy. The effects of heat treatment and pore-forming additives on the gas permeance of the UV-cross-linked porous substrate are reported. The effects of different pre-coating treatments on the gas permeance of the metallic ion-cross-linked PIM-1 TFC membrane are also discussed. The metallic ion-crosslinked PIM-1 TFC membrane displayed high CO_2/N_2 selectivity(23) and good CO_2 permeance(1058 GPU).展开更多
THz Radar Cross Section(RCS)measurement setup based on THz Time Domain Spectroscopy(TDS)is built to provide large scaled targets test ability in recent years.As calibrations,the metal plates and dihedrons are used in ...THz Radar Cross Section(RCS)measurement setup based on THz Time Domain Spectroscopy(TDS)is built to provide large scaled targets test ability in recent years.As calibrations,the metal plates and dihedrons are used in our experiments.The measurements are performed in a monostatic terahertz time-domain setup.The author proposed time domain and frequency domain calibration methods for angular RCS of calibrations,comparing the measurements with the theory to verify the ability of the time domain measurement setup.展开更多
将既能耐抗重金属又能降解苯酚的细菌Ralstonia m etalliduransCH34固定化以提高其降酚效率。首先通过正交实验,得到了固定化该菌种的最优制备条件,然后对固定化细胞的降酚效果进行了研究。结果表明,固定化R.m etalliduransCH34的降酚...将既能耐抗重金属又能降解苯酚的细菌Ralstonia m etalliduransCH34固定化以提高其降酚效率。首先通过正交实验,得到了固定化该菌种的最优制备条件,然后对固定化细胞的降酚效果进行了研究。结果表明,固定化R.m etalliduransCH34的降酚效果明显优于游离细胞;抗重金属毒性方面也有较大提高;在加入额外碳源(甲苯,柠檬酸)情况下,固定化R.m etalliduransCH34进行苯酚降解时所受影响明显要小于游离态菌。展开更多
Cu-catalyzed oxidation of 5-hexyl-1,3-dihydroimidazo-2-one (1) in the presence of propylamine, as surrogates for the oxidized His side chain and Lys side chain, was investigated. 5-Hexylidene-4-propylamino-1,5-dihydro...Cu-catalyzed oxidation of 5-hexyl-1,3-dihydroimidazo-2-one (1) in the presence of propylamine, as surrogates for the oxidized His side chain and Lys side chain, was investigated. 5-Hexylidene-4-propylamino-1,5-dihydroimidazol-2-one (2), a model His-Lys cross-link product, was isolated and structurally characterized by NMR and mass spectrometry.展开更多
文摘In modem manufacturing, a new type of sheet metal part with step cross-section in both inner hole and outer edge is proposed. The traditional stamping separating processes can only produce sheet metal part with vertical cross-section. According to the latest developing theory and potential of cold pressure forming： combination of pressure and cold forging, a new flow control forming of sheet metal（FCF） is excogitated based on blanking process of general stamping and combined with cold forging processes such as extrusion and coining, etc, which is aiming at the above-mentioned new type of sheet metal part. With utilization of this new process, the new type of sheet metal parts can be manufactured. In order to shorten the testing period, the numerical simulation was carried out by using DEFORM-3D software, and both deformation and mechanics rules were analyzed. Based on the simulation, both punching part and blanked parts of this new type were successfully developed. Then a new conception of optimal distance between the step walls of inner hole and outside edge was proposed and the design principle for its numerical value was inferred. Furthermore, a mold set for combination of stamping ＆ cold forging was designed and manufactured, by which the technologic experiments were taken for validation with Aluminum plate of thickness 2.35 mm for power battery cover board, which verified the principle of the distance between the step walls. The research of cold pressure forming of thin sheet metal with step cross-section is significant, not only to the development of modem mechanical manufacture, but also to metal plastic forming science.
基金Supported by the National Natural Science Foundation of China(21506160,21776217)the Science and Technology Plans of Tianjin(16PTSYJC00110)
文摘Metallic ion-cross-linked polymer of intrinsic microporosity(PIM-1) thin-film composite(TFC) membranes supported on an ultraviolet(UV)-cross-linked porous substrate were fabricated. The UV-cross-linked porous substrate was prepared via polymerization-induced phase separation. The PIM-1 TFC membranes were fabricated via a dip-coating procedure. Metallic ion-cross-linked PIM-1 TFC membranes were fabricated by hydrolyzing the PIM-1 TFC membrane in an alkali solution and then cross-linking it in a multivalent metallic ion solution. The pore size and porous structures were evaluated by low-temperature N_2 adsorption–desorption analysis. The membrane structure was investigated by field-emission scanning electron microscopy. The effects of heat treatment and pore-forming additives on the gas permeance of the UV-cross-linked porous substrate are reported. The effects of different pre-coating treatments on the gas permeance of the metallic ion-cross-linked PIM-1 TFC membrane are also discussed. The metallic ion-crosslinked PIM-1 TFC membrane displayed high CO_2/N_2 selectivity(23) and good CO_2 permeance(1058 GPU).
基金The Science and Technology Commission of Shanghai Municipality under Grant(16ZR1435000)
文摘THz Radar Cross Section(RCS)measurement setup based on THz Time Domain Spectroscopy(TDS)is built to provide large scaled targets test ability in recent years.As calibrations,the metal plates and dihedrons are used in our experiments.The measurements are performed in a monostatic terahertz time-domain setup.The author proposed time domain and frequency domain calibration methods for angular RCS of calibrations,comparing the measurements with the theory to verify the ability of the time domain measurement setup.
文摘将既能耐抗重金属又能降解苯酚的细菌Ralstonia m etalliduransCH34固定化以提高其降酚效率。首先通过正交实验,得到了固定化该菌种的最优制备条件,然后对固定化细胞的降酚效果进行了研究。结果表明,固定化R.m etalliduransCH34的降酚效果明显优于游离细胞;抗重金属毒性方面也有较大提高;在加入额外碳源(甲苯,柠檬酸)情况下,固定化R.m etalliduransCH34进行苯酚降解时所受影响明显要小于游离态菌。
文摘Cu-catalyzed oxidation of 5-hexyl-1,3-dihydroimidazo-2-one (1) in the presence of propylamine, as surrogates for the oxidized His side chain and Lys side chain, was investigated. 5-Hexylidene-4-propylamino-1,5-dihydroimidazol-2-one (2), a model His-Lys cross-link product, was isolated and structurally characterized by NMR and mass spectrometry.
