With pretty high surface tension, the room temperature liquid metal may inherit with unexpected be- haviors that conventional fluids could not own. Here, we disclosed the coalescence and ejection phenomena of liquid m...With pretty high surface tension, the room temperature liquid metal may inherit with unexpected be- haviors that conventional fluids could not own. Here, we disclosed the coalescence and ejection phenomena of liquid metal droplets via high-speed camera. It was experimen- tally found that, when gently contacting （rather than col- liding） two metal droplets with identical size together in NaOH solution, oscillating coalescence would happen which runs just like a spring after the interface ruptures and forms capillary waves. For two metal droplets with evidently different diameters, the coalescence induces rather unusual ejection phenomena. The large droplet would swallow part of the small one and then eject another much smaller droplet. Such phenomenon provides a direct evidence for the existence of electrical double layer on metal droplets. The dynamics fluid impacting behaviors were quantified through processing images from the recorded movies, and the basic differences between the liquid metal droplets and that of water droplets were clar- ified. Theoretical mechanisms related to the events were preliminarily interpreted. The present finding refreshes the basic understanding of the liquid metal droplets, which also suggests potential values of applying such fundamental effects to characterize viscosity, surface tension, electrical double layer of the metal fluids and droplet formations.展开更多
This study was undertaken to assess the physical, chemical and hydrochemical quality of spring water in the southwestern basin of Jordan during a 60-month follow up monitoring study (April 2009 to April 2014). The sam...This study was undertaken to assess the physical, chemical and hydrochemical quality of spring water in the southwestern basin of Jordan during a 60-month follow up monitoring study (April 2009 to April 2014). The samples were analyzed for temperature, conductivity, dissolved oxygen, pH, major cations, major anions and trace metals. The results show that there were considerable variations among the analyzed samples with respect to their physical and chemical parameters, which lie below the maximum permissible levels of the Jordanian and World Health Organization (WHO) drinking water standards. This study shows that the trace metals of spring water in the study area do not generally pose any health or environmental issues. The assessment of water samples indicates that groundwater, in general, is chemically suitable for drinking and agricultural uses.展开更多
Two-way shape memory effect (TWSME) was induced into the TiNi shape memoryalloys (SMAs) spring by thermomechanical training after annealing treatment, which has promisingapplication in micro-actuating fields. The TWSM...Two-way shape memory effect (TWSME) was induced into the TiNi shape memoryalloys (SMAs) spring by thermomechanical training after annealing treatment, which has promisingapplication in micro-actuating fields. The TWSME spring can contract upon heating and extend uponcooling. The results show that there is an increase of the recovery ratio up to a maximum TWSME of45%. During the training procedure, transformation temperatures and hysteresis were measured bydifferent scanning calorimetry (DSC). The results show that A_s (reverse transformation starttemperature) and A_f (reverse transformation finish temperature) shift to lower temperature aftertraining. The intervals of A_fA_s and M_s-M_f (M_s and M_f are the martensite start and finishtemperatures, respectively) increase and the heat of transformation decreases after training. Theelectrothermal driving characteristics of the TWSME springs were also investigated with alternatingcurrent density of 3.2-14.7 A/mm^2. It is found that the time response and the maximum contractionratio greatly depend on the magnitude of the electrical current density.展开更多
The 3-D thermo-mechanical coupled elasto-plastic finite element method (FEM)was used for the simulation of the two-pass continuous hot rolling process of 60SiMnA spring steelbars and rods using MARC/AutoForge3.1 softw...The 3-D thermo-mechanical coupled elasto-plastic finite element method (FEM)was used for the simulation of the two-pass continuous hot rolling process of 60SiMnA spring steelbars and rods using MARC/AutoForge3.1 software. The simulated results visualize the metal flow andthe dynamic evolutions of the strain, stress and temperature during the continuous hot rolling,especially inside the work-piece. It is shown that the non-uniform distributions of the strain,stress and temperature on the longitudinal and transverse sections are a distinct characteristic ofthe continuous hot rolling, which can be used as basic data for improving the tool design,predicting and controlling the micro-structural evolution of a bar and rod.展开更多
基金This work was partially supported by the Re- search Funding of the Chinese Academy of Sciences （KGZD-EW-T04-4） and the National Natural Science Foundation of China （81071225）.
文摘With pretty high surface tension, the room temperature liquid metal may inherit with unexpected be- haviors that conventional fluids could not own. Here, we disclosed the coalescence and ejection phenomena of liquid metal droplets via high-speed camera. It was experimen- tally found that, when gently contacting （rather than col- liding） two metal droplets with identical size together in NaOH solution, oscillating coalescence would happen which runs just like a spring after the interface ruptures and forms capillary waves. For two metal droplets with evidently different diameters, the coalescence induces rather unusual ejection phenomena. The large droplet would swallow part of the small one and then eject another much smaller droplet. Such phenomenon provides a direct evidence for the existence of electrical double layer on metal droplets. The dynamics fluid impacting behaviors were quantified through processing images from the recorded movies, and the basic differences between the liquid metal droplets and that of water droplets were clar- ified. Theoretical mechanisms related to the events were preliminarily interpreted. The present finding refreshes the basic understanding of the liquid metal droplets, which also suggests potential values of applying such fundamental effects to characterize viscosity, surface tension, electrical double layer of the metal fluids and droplet formations.
文摘This study was undertaken to assess the physical, chemical and hydrochemical quality of spring water in the southwestern basin of Jordan during a 60-month follow up monitoring study (April 2009 to April 2014). The samples were analyzed for temperature, conductivity, dissolved oxygen, pH, major cations, major anions and trace metals. The results show that there were considerable variations among the analyzed samples with respect to their physical and chemical parameters, which lie below the maximum permissible levels of the Jordanian and World Health Organization (WHO) drinking water standards. This study shows that the trace metals of spring water in the study area do not generally pose any health or environmental issues. The assessment of water samples indicates that groundwater, in general, is chemically suitable for drinking and agricultural uses.
基金This project is financially supported by the National Natural Science Foundation of China (No. 10175042)
文摘Two-way shape memory effect (TWSME) was induced into the TiNi shape memoryalloys (SMAs) spring by thermomechanical training after annealing treatment, which has promisingapplication in micro-actuating fields. The TWSME spring can contract upon heating and extend uponcooling. The results show that there is an increase of the recovery ratio up to a maximum TWSME of45%. During the training procedure, transformation temperatures and hysteresis were measured bydifferent scanning calorimetry (DSC). The results show that A_s (reverse transformation starttemperature) and A_f (reverse transformation finish temperature) shift to lower temperature aftertraining. The intervals of A_fA_s and M_s-M_f (M_s and M_f are the martensite start and finishtemperatures, respectively) increase and the heat of transformation decreases after training. Theelectrothermal driving characteristics of the TWSME springs were also investigated with alternatingcurrent density of 3.2-14.7 A/mm^2. It is found that the time response and the maximum contractionratio greatly depend on the magnitude of the electrical current density.
文摘The 3-D thermo-mechanical coupled elasto-plastic finite element method (FEM)was used for the simulation of the two-pass continuous hot rolling process of 60SiMnA spring steelbars and rods using MARC/AutoForge3.1 software. The simulated results visualize the metal flow andthe dynamic evolutions of the strain, stress and temperature during the continuous hot rolling,especially inside the work-piece. It is shown that the non-uniform distributions of the strain,stress and temperature on the longitudinal and transverse sections are a distinct characteristic ofthe continuous hot rolling, which can be used as basic data for improving the tool design,predicting and controlling the micro-structural evolution of a bar and rod.
