An improved indirect scheme for laser positron generation is proposed. The positron yields in high-ZZ metal targets irradiated by laser produced electrons from near-critical density plasmas and underdense plasma are i...An improved indirect scheme for laser positron generation is proposed. The positron yields in high-ZZ metal targets irradiated by laser produced electrons from near-critical density plasmas and underdense plasma are investigated numerically. It is found that the positron yield is mainly affected by the number of electrons of energies up to several hundreds of MeV. Using near-critical density targets for electron acceleration, the number of high energy electrons can be increased dramatically. Through start-to-end simulations, it is shown that up to 6.78×10106.78×1010 positrons can be generated with state-of-the-art Joule-class femtosecond laser systems.展开更多
Towards higher impact velocities,ballistic events are increasingly determined by the material temperatures.Related effects might range from moderate thermal softening to full phase transition.In particular,it is of gr...Towards higher impact velocities,ballistic events are increasingly determined by the material temperatures.Related effects might range from moderate thermal softening to full phase transition.In particular,it is of great interest to quantify the conditions for incipient or full melting of metals during impact interactions,which result in a transition from still strength-affected to hydrodynamic material behavior.In this work,we investigate to which extent the respective melting thresholds are also dependent on the initial,and generally elevated,temperatures of projectiles and targets before impact.This is studied through the application of a model developed recently by the authors to characterize the transition regime between high-velocity and hypervelocity impact,for which the melting thresholds of materials were used as the defining quantities.The obtained results are expected to be of general interest for ballistic application cases where projectiles or targets are preheated.Such conditions might result,for example,from aerodynamic forces acting onto a projectile during atmospheric flight,explosive shapedcharge-jet formation or armor exposure to environmental conditions.The performed analyses also broaden the scientific understanding of the relevance of temperature in penetration events,generally known since the 1960s,but often not considered thoroughly in impact studies.展开更多
The studies were made on the preparation processes of the rare earth metal and alloy target materials and their characterization. In this work the rare earth metals were prepared by electrolysis of the oxide in molten...The studies were made on the preparation processes of the rare earth metal and alloy target materials and their characterization. In this work the rare earth metals were prepared by electrolysis of the oxide in molten salt for Nd metal and metallothermic reduction of the fluorides for Gd, Tb, Dy metals. After vacuum refining and distillation purification these rare earth metals were used for manufacturing the element targets, mosaic targets and as the starting materials of preparing the rare earth-transition metal (RE-TM) alloy targets. The four kinds of Dy-FeCo, NdDy-FeCo, Tb-FeCo and GdTb-FeCo alloy targets with diameter of 100 mm and thickness of 3 mm were prepared using powder metallurgical technique. The oxygen content and microstructure of the prepared RE-TM cast alloys and sintered targets were analyzed. The features and requirements of the RE-TM alloy sputtering target materials were also discussed.展开更多
In the following paper an experiment dedicated to the accident protection system of a Liquid Metal Target is presented.The test was carried out at the liquid metal test stand(LIMETS)at PSI in which the malfunctioning ...In the following paper an experiment dedicated to the accident protection system of a Liquid Metal Target is presented.The test was carried out at the liquid metal test stand(LIMETS)at PSI in which the malfunctioning of a target during operation was simulated.It could be demonstrated that measurements and the proper(on-line)analysis of target vibrations and surrounding sound pressure fields allow the detection of a malfunctions like deformation or detaching of structural elements immeresed in the flow.Amplitudes of acceleration sensors and microphones signals as well as frequencies of the disturbances' signals are prospective parameters to be used in an automated accident protection system as indicators for a target malfunction.展开更多
In this study, we investigated the presence of Zn, Fe, Cu, and Ca in rice cultivated in four local government areas (Nkanu East, Aninri, Uzo Uwani, Isi Uzo) within Enugu state, Nigeria. We employed an Atomic Absorptio...In this study, we investigated the presence of Zn, Fe, Cu, and Ca in rice cultivated in four local government areas (Nkanu East, Aninri, Uzo Uwani, Isi Uzo) within Enugu state, Nigeria. We employed an Atomic Absorption Spectrometer with an air acetylene flame to analyze these metals after digesting the rice samples. Risk assessment studies were carried out to determine any potential health risk to consumers by evaluating the estimated daily intake (EDI), the target hazard quotient (THQ) and hazard index (HI). The average concentration (mg/kg) of trace metals in the rice samples was within the acceptable limits established by FAO/WHO. Specifically, Zn ranged from 0.265 to 0.632 mg/kg, Fe from 2.73 to 4.131 mg/kg, Cu from 0.205 to 4.131 mg/kg, and Ca from 9.718 to 12.150 mg/kg. There were no statistically significant differences in metal concentrations among the various locations. Consequently, the rice analyzed in this study can be considered safe for consumption. The calculated EDI (mg/kg-day) values were below the maximum tolerable daily intake thresholds. THQ values also fell within safe levels, and the HI values were less than 1, signifying no potential health risks associated with consuming rice from these locations. In conclusion, there is no significant non-carcinogenic health risk associated with exposure to trace metals through the consumption of rice from these areas.展开更多
This study aimed at investigating the content of heavy metals in some marine organisms of the Cameroon Atlantic coast and assessing the health risk due to their consumption by the population. Nine fish and one shrimp ...This study aimed at investigating the content of heavy metals in some marine organisms of the Cameroon Atlantic coast and assessing the health risk due to their consumption by the population. Nine fish and one shrimp species were collected for this study. These fish species were Ethmolosa fimbriata, Drepane africana, Dentex moroccanus, Arius latiscotatus, Scarus hoefleri, Cynoglossus browni, Sardinella madorensis, Pseudotolithus elongatus, Pseudotolithus typus. The shrimp species was Macrobranchium macrobranchium. The elements investigated in this study were: Fe, Co, Cu, Cd and Pb. For seven fish species it was found that the concentration of heavy metals followed the order Fe > Co > Cd > Cu > Pb. For most fish species the Target Hazard Quotient (THQ) value calculated showed the following trend Cd > Co > Pb > Fe ≥ Cu. Cadmium was found to be the main contributor to health risk that may result from the consumption of the fish species under study. The THQ for this element was in the range 0.7 - 1.2 while the Target Cancer Risk (TR) due to ingestion of this metal was in the range (3 × 10<sup>-</sup><sup>4</sup> - 6 × 10<sup>-</sup><sup>4</sup>). These values are slightly above the threshold limits established for both carcinogenic and non carcinogenic risks by the United States, Environmental Protection Agency. The estimated weekly intake of cadmium due to consumption of some fishes under study was greater or equal to the Provisional Tolerable Weekly Intake (PTWI) determined by Food and Agriculture Organization/World Health Organization.展开更多
Recent advances in the application of the nonlinear energy sink under a sinusoidal excitation make it possible to investigate metal-rubber vibration absorber. To provide such a vibration absorber for the integrated sp...Recent advances in the application of the nonlinear energy sink under a sinusoidal excitation make it possible to investigate metal-rubber vibration absorber. To provide such a vibration absorber for the integrated spacecraft platform,we analyze the targeted energy transfer of the simplified model with nonlinear energy sink using the complex-variables averaging method. Theoretical study shows two quasi-periodic responses that are essentially different in this nonlinear system. The steady-state response which is one of two quasi-periodic responses is caused by the linear instability of system,and another one appears as a result of the nonlinear normal modes between the linear and nonlinear oscillators,resulting from the energy transfer of different oscillators,and it can be used to vibration absorber. Secondly,this paper also discusses the performance of the proposed nonlinear absorber by using the phase portraits. All conclusion derived by the analytic model is verified numerically and the results are consistent with numerical simulations.展开更多
基金Supported by the National Basic Research Program of China under Grant No 2013CBA01502the National Natural Science Foundation of China under Grant Nos 11575011 and 11535001+1 种基金the National Grand Instrument Project under Grant No2012YQ030142the UK EPSRC under Grant Nos EP/G054950/1,EP/G056803/1,EP/G055165/1 and EP/M022463/1
文摘An improved indirect scheme for laser positron generation is proposed. The positron yields in high-ZZ metal targets irradiated by laser produced electrons from near-critical density plasmas and underdense plasma are investigated numerically. It is found that the positron yield is mainly affected by the number of electrons of energies up to several hundreds of MeV. Using near-critical density targets for electron acceleration, the number of high energy electrons can be increased dramatically. Through start-to-end simulations, it is shown that up to 6.78×10106.78×1010 positrons can be generated with state-of-the-art Joule-class femtosecond laser systems.
基金funding by Bundesministerium der Verteidigung(BMVg),Germany。
文摘Towards higher impact velocities,ballistic events are increasingly determined by the material temperatures.Related effects might range from moderate thermal softening to full phase transition.In particular,it is of great interest to quantify the conditions for incipient or full melting of metals during impact interactions,which result in a transition from still strength-affected to hydrodynamic material behavior.In this work,we investigate to which extent the respective melting thresholds are also dependent on the initial,and generally elevated,temperatures of projectiles and targets before impact.This is studied through the application of a model developed recently by the authors to characterize the transition regime between high-velocity and hypervelocity impact,for which the melting thresholds of materials were used as the defining quantities.The obtained results are expected to be of general interest for ballistic application cases where projectiles or targets are preheated.Such conditions might result,for example,from aerodynamic forces acting onto a projectile during atmospheric flight,explosive shapedcharge-jet formation or armor exposure to environmental conditions.The performed analyses also broaden the scientific understanding of the relevance of temperature in penetration events,generally known since the 1960s,but often not considered thoroughly in impact studies.
基金Former the Ministry of Metallurgical Industry of China (BJ95-06-01)
文摘The studies were made on the preparation processes of the rare earth metal and alloy target materials and their characterization. In this work the rare earth metals were prepared by electrolysis of the oxide in molten salt for Nd metal and metallothermic reduction of the fluorides for Gd, Tb, Dy metals. After vacuum refining and distillation purification these rare earth metals were used for manufacturing the element targets, mosaic targets and as the starting materials of preparing the rare earth-transition metal (RE-TM) alloy targets. The four kinds of Dy-FeCo, NdDy-FeCo, Tb-FeCo and GdTb-FeCo alloy targets with diameter of 100 mm and thickness of 3 mm were prepared using powder metallurgical technique. The oxygen content and microstructure of the prepared RE-TM cast alloys and sintered targets were analyzed. The features and requirements of the RE-TM alloy sputtering target materials were also discussed.
文摘In the following paper an experiment dedicated to the accident protection system of a Liquid Metal Target is presented.The test was carried out at the liquid metal test stand(LIMETS)at PSI in which the malfunctioning of a target during operation was simulated.It could be demonstrated that measurements and the proper(on-line)analysis of target vibrations and surrounding sound pressure fields allow the detection of a malfunctions like deformation or detaching of structural elements immeresed in the flow.Amplitudes of acceleration sensors and microphones signals as well as frequencies of the disturbances' signals are prospective parameters to be used in an automated accident protection system as indicators for a target malfunction.
文摘In this study, we investigated the presence of Zn, Fe, Cu, and Ca in rice cultivated in four local government areas (Nkanu East, Aninri, Uzo Uwani, Isi Uzo) within Enugu state, Nigeria. We employed an Atomic Absorption Spectrometer with an air acetylene flame to analyze these metals after digesting the rice samples. Risk assessment studies were carried out to determine any potential health risk to consumers by evaluating the estimated daily intake (EDI), the target hazard quotient (THQ) and hazard index (HI). The average concentration (mg/kg) of trace metals in the rice samples was within the acceptable limits established by FAO/WHO. Specifically, Zn ranged from 0.265 to 0.632 mg/kg, Fe from 2.73 to 4.131 mg/kg, Cu from 0.205 to 4.131 mg/kg, and Ca from 9.718 to 12.150 mg/kg. There were no statistically significant differences in metal concentrations among the various locations. Consequently, the rice analyzed in this study can be considered safe for consumption. The calculated EDI (mg/kg-day) values were below the maximum tolerable daily intake thresholds. THQ values also fell within safe levels, and the HI values were less than 1, signifying no potential health risks associated with consuming rice from these locations. In conclusion, there is no significant non-carcinogenic health risk associated with exposure to trace metals through the consumption of rice from these areas.
文摘This study aimed at investigating the content of heavy metals in some marine organisms of the Cameroon Atlantic coast and assessing the health risk due to their consumption by the population. Nine fish and one shrimp species were collected for this study. These fish species were Ethmolosa fimbriata, Drepane africana, Dentex moroccanus, Arius latiscotatus, Scarus hoefleri, Cynoglossus browni, Sardinella madorensis, Pseudotolithus elongatus, Pseudotolithus typus. The shrimp species was Macrobranchium macrobranchium. The elements investigated in this study were: Fe, Co, Cu, Cd and Pb. For seven fish species it was found that the concentration of heavy metals followed the order Fe > Co > Cd > Cu > Pb. For most fish species the Target Hazard Quotient (THQ) value calculated showed the following trend Cd > Co > Pb > Fe ≥ Cu. Cadmium was found to be the main contributor to health risk that may result from the consumption of the fish species under study. The THQ for this element was in the range 0.7 - 1.2 while the Target Cancer Risk (TR) due to ingestion of this metal was in the range (3 × 10<sup>-</sup><sup>4</sup> - 6 × 10<sup>-</sup><sup>4</sup>). These values are slightly above the threshold limits established for both carcinogenic and non carcinogenic risks by the United States, Environmental Protection Agency. The estimated weekly intake of cadmium due to consumption of some fishes under study was greater or equal to the Provisional Tolerable Weekly Intake (PTWI) determined by Food and Agriculture Organization/World Health Organization.
基金Sponsored by the Open Fund of National Defense Key Discipline Laboratory of Micro-Spacecraft Technology(Grant No.HIT.KLOF.MST.201302)
文摘Recent advances in the application of the nonlinear energy sink under a sinusoidal excitation make it possible to investigate metal-rubber vibration absorber. To provide such a vibration absorber for the integrated spacecraft platform,we analyze the targeted energy transfer of the simplified model with nonlinear energy sink using the complex-variables averaging method. Theoretical study shows two quasi-periodic responses that are essentially different in this nonlinear system. The steady-state response which is one of two quasi-periodic responses is caused by the linear instability of system,and another one appears as a result of the nonlinear normal modes between the linear and nonlinear oscillators,resulting from the energy transfer of different oscillators,and it can be used to vibration absorber. Secondly,this paper also discusses the performance of the proposed nonlinear absorber by using the phase portraits. All conclusion derived by the analytic model is verified numerically and the results are consistent with numerical simulations.
