Study on the mechanism and reaction characteristics of metal-supported phosphogypsum as oxygen carrier in a chemical looping gasification application

This study aimed to explore the chemical looping gasification(CLG)reaction characteristics of the metal-supported composite phosphogypsum(PG)oxygen carriers(OCs)and the thermodynamic mechanism.The FactSage 7.1 thermodynamic simulation was used to explore the oxygen release and H_(2)S removal mechanisms.The experimental results showed that the syngas yield of CLG with PG-CuFe_(2)O_(4)was more than that with PG-Fe_(2)O_(3)20/CuO40 or PG-Fe_(2)O_(3)30/CuO30 OC at 1023 K when the water vapor content was 0.3.Furthermore,the maximum syngas yield of the CO selectivity was 70.3% and of the CO_(2)selectivity was 23.8%.The H_(2)/CO value was 0.78,and the highest carbon conversion efficiency was 91.9% in PG-CuFe_(2)O_(4)at the gasification temperature of 1073 K.The metal-supported PG composite oxygen carrier was proved not only as an oxygen carrier to participate in the preparation of syngas but also as a catalyst to catalyze coal gasification reactions.Furthermore,both the experimental results and FactSage 7.1 thermodynamic analysis revealed that the trapping mechanism of H_(2)S by composite OCs was as follows:CuO first lost lattice oxygen as an oxygen carrier to generate Cu_(2)O,which,in turn,reacted with H_(2)S to generate Cu_(2)S.This study provided efficient guidance and reference for OC design in CLG.

Strong metal-support interactions between highly dispersed Cu^(+) species and ceria via mix-MOF pyrolysis toward promoted water-gas shift reaction

The modulation of metal-support interfacial interaction is significant but challenging in the design of high-efficiency and high-stability supported catalysts.Here,we report a synthetic strategy to upgrade Cu-CeO_(2)interfacial interaction by the pyrolysis of mixed metal-organic framework(MOF)structure.The obtained highly dispersed Cu/CeO_(2)-MOF catalyst via this strategy was used to catalyze water-gas shift reaction(WGSR),which exhibited high activity of 40.5μmolCOgcat^(-1).s^(-1)at 300℃and high stability of about 120 h.Based on comprehensive studies of electronic structure,pyrolysis strategy has significant effect on enhancing metal-support interaction and then stabilizing interfacial Cu^(+)species under reaction conditions.Abundant Cu^(+)species and generated oxygen vacancies over Cu/CeO_(2)-MOF catalyst played a key role in CO molecule activation and H2O molecule dissociation,respectively.Both collaborated closely and then promoted WGSR catalytic performance in comparison with traditio nal supported catalysts.This study shall offer a robust approach to harvest highly dispersed catalysts with finely-tuned metal-support interactions for stabilizing the most interfacial active metal species in diverse heterogeneous catalytic reactions.

Boron Nanosheet-Supported Rh Catalysts for Hydrogen Evolution:A New Territory for the Strong Metal-Support Interaction Effect

High-efficiency electrochemical hydrogen evolution reaction(HER)offers a promising strategy to address energy and environmental crisis.Platinum is the most effective electrocatalyst for the HER.However,challenging scarcity,valuableness,and poor electrochemical stability still hinder its wide application.Here,we designed an outstanding HER electrocatalyst,highly dispersed rhodium(Rh)nanoparticles with an average diameter of only 3 nm supported on boron(B)nanosheets.The HER catalytic activity is even comparable to that of commercial platinum catalysts,with an overpotential of only 66 mV in 0.5 M H_(2)SO_(4) and 101 mV in 1 M KOH to reach the current density of 10 mA cm−2.Meanwhile,the catalyst exhibited impressive electrochemical durability during long-term electrochemical processes in acidic and alkaline media,even the simu-lated seawater environment.Theoretical calculations unraveled that the structure-activity relationship between B(104)crystal plane and Rh(111)crystal plane is beneficial to the release of hydrogen,and surface O plays a vital role in the catalysis process.Our work may gain insights into the development of supported metal catalysts with robust catalytic performance through precise engineering of the strong metal-supported interaction effect.

Investigating the impact of dynamic structural changes of Au/rutile catalysts on the catalytic activity of CO oxidation

The surface properties of oxidic supports and their interaction with the supported metals play critical roles in governing the catalytic activities of oxide‐supported metal catalysts.When metals are supported on reducible oxides,dynamic surface reconstruction phenomena,including strong metal–support interaction(SMSI)and oxygen vacancy formation,complicate the determination of the structural–functional relationship at the active sites.Here,we performed a systematic investigation of the dynamic behavior of Au nanocatalysts supported on flame‐synthesized TiO_(2),which takes predominantly a rutile phase,using CO oxidation above room temperature as a probe reaction.Our analysis conclusively elucidated a negative correlation between the catalytic activity of Au/TiO_(2) and the oxygen vacancy at the Au/TiO_(2) interface.Although the reversible formation and retracting of SMSI overlayers have been ubiquitously observed on Au/TiO_(2) samples,the catalytic consequence of SMSI remains inconclusive.Density functional theory suggests that the electron transfer from TiO_(2) to Au is correlated to the presence of the interfacial oxygen vacancies,retarding the catalytic activation of CO oxidation.

Al-modified yolk-shell silica particle-supported NiMo catalysts for ultradeep hydrodesulfurization of dibenzothiophene and 4,6-dimethyldibenzothiophene:Efficient accessibility of active sites and suitable acidity

Yolk-shell SiO2 particles(YP)with center-radial meso-channels were fabricated through a simple and effective method.Al-containing YP-supported NiMo catalysts with different Al amounts(NiMo/AYP-x,x=Si/Al molar proportion)were prepared and dibenzothiophene(DBT)and 4,6-dimethyl-dibenzothiophene(4,6-DMDBT)were employed as the probes to evaluate the hydrodesulfurization(HDS)catalytic performance.The as-prepared AYP-x carriers and corresponding catalysts were characterized by some advanced characterizations to obtain deeper correlations between physicochemical properties and the HDS performance.The average pore sizes of series AYP-x supports are above 6.0 nm,which favors the mass transfer of organic sulfides.The cavity between the yolk and the shell is beneficial for the enrichment of S-containing compounds and the accessibility between reactants and active metals.Aluminum embedded into the silica framework could facilitate the formation of Lewis(L)and Brønsted(B)acid sites and adjust the metal-support interaction(MSI).Among all the as-synthesized catalysts,NiMo/AYP-20 catalyst shows the highest HDS activities.The improved HDS activity of NiMo/AYP-20 catalyst is attributed to the perfect combination of excellent structural properties of the yolk-shell mesoporous silica,enhanced acidity,moderate MSI,and good accessibility/dispersion of active components.

Understanding the catalytic performance and deactivation behaviour of second-promoter doped Pt/WO_(χ)/γ-Al_(2)O_(3) catalysts in the glycerol hydrogenolysis for selective and cleaner production of 1,3-propanediol

The selective aqueous-phase glycerol hydrogenolysis is a promising reaction to produce commercially useful 1,3-propanediol(1,3-PDO).The Pt-WOx bifunctional catalyst can catalyse the glycerol hydrogenol-ysis but the catalyst deactivation via sintering,metal leaching,and coking can predominantly occur in the aqueous phase reaction.In this work,the effect of reaction temperature,pressure and second promoter(Cu,Fe,Rh,Mn,Re,Ru,Ir,Sn,B,and P)on catalytic performance and deactivation behaviour of Pt/WOx/-Al2O3 was investigated.When doped with Rh,Mn,Re,Ru,Ir,B,and P,the second promoter boosts catalytic activity by promoting great dispersion of Pt on support and increasing Pt surface area.The increased Bronsted acid sites lead to selective synthesis of 1,3-PDO than 1,2-propanediol(1,2-PDO).The characterization studies of fresh and spent catalysts reveal that the main cause of catalyst deactivation is the Pt sintering,as interpreted based on XRD,CO chemisorption,and TEM analyses.The Pt sintering is affected depending on the second promoter that can either or reduce the interaction between Pt,WO_(χ)/γ and Al_(2)O_(3).As an electron acceptor of Pt in Pt/WO_(χ)/γ-Al_(2)O_(3),Re and Mn as second promoters resulted in increased Pt^(2+) on the catalytic surface,which strengthens the contact between Pt andγ-Al_(2)O_(3) and WO_(χ),resulting in a decrease in Pt sintering.The metal leaching and coking are not affected by the presence of second promoter.The catalyst modified with a second promoter possesses improved catalytic activity and 1,3-PDO production,however the stability continues to remain a challenge.The present work unrav-elled the determining parameters of catalytic activity and deactivation,thus providing a promising pro-tocol toward effective catalysts for glycerol hydrogenolysis.

Strong metal–support interaction boosts the electrocatalytic hydrogen evolution capability of Ru nanoparticles supported on titanium nitride

Ruthenium(Ru)has been regarded as one of the most promising alternatives to substitute Pt for catalyzing alkaline hydrogen evolution reaction(HER),owing to its inherent high activity and being the cheapest platinum-group metal.Herein,based on the idea of strong metal–support interaction(SMSI)regulation,Ru/TiN catalysts with different degrees of TiN overlayer over Ru nanoparticles were fabricated,which were applied to the alkaline electrolytic water.Characterizations reveal that the TiN overlayer would gradually encapsulate the Ru nanoparticles and induce more electron transfer from Ru nanoparticles to TiN support by the Ru–N–Ti bond as the SMSI degree increased.Further study shows that the exposed Ru–TiN interfaces greatly promote the H_(2) desorption capacity.Thus,the Ru/TiN-300 with a moderate SMSI degree exhibits excellent HER performance,with an overpotential of 38 mV at 10 mA cm^(−2).Also,due to the encapsulation role of TiN overlayer on Ru nanoparticles,it displays super long-term stability with a very slight potential change after 24 h.This study provides a deep insight into the influence of the SMSI effect between Ru and TiN on HER and offers a novel approach for preparing efficient and stable HER electrocatalysts through SMSI engineering.

Reversed charge transfer induced by nickel in Fe-Ni/Mo_(2)C@nitrogen-doped carbon nanobox for promoted reversible oxygen electrocatalysis

The interaction between metal and support is critical in oxygen catalysis as it governs the charge transfer between these two entities,influences the electronic structures of the supported metal,affects the adsorption energies of reaction intermediates,and ultimately impacts the catalytic performance.In this study,we discovered a unique charge transfer reversal phenomenon in a metal/carbon nanohybrid system.Specifically,electrons were transferred from the metal-based species to N-doped carbon,while the carbon support reciprocally donated electrons to the metal domain upon the introduction of nickel.This led to the exceptional electrocatalytic performances of the resulting Ni-Fe/Mo_(2)C@nitrogen-doped carbon catalyst,with a half-wave potential of 0.91 V towards oxygen reduction reaction(ORR)and a low overpotential of 290 m V at 10 mA cm^(-2)towards oxygen evolution reaction(OER)under alkaline conditions.Additionally,the Fe-Ni/Mo_(2)C@carbon heterojunction catalyst demonstrated high specific capacity(794 mA h g_(Zn)~(-1))and excellent cycling stability(200 h)in a Zn-air battery.Theoretical calculations revealed that Mo_(2)C effectively inhibited charge transfer from Fe to the support,while secondary doping of Ni induced a charge transfer reversal,resulting in electron accumulation in the Fe-Ni alloy region.This local electronic structure modulation significantly reduced energy barriers in the oxygen catalysis process,enhancing the catalytic efficiency of both ORR and OER.Consequently,our findings underscore the potential of manipulating charge transfer reversal between the metal and support as a promising strategy for developing highly-active and durable bi-functional oxygen electrodes.

Combined Promoting Effects of Specific Organic Functional Groups and Alumina Surface Characteristics for the Design of a Highly Efficient NiMo/Al_(2)O_(3) Hydrodesulfurization Catalyst

To prepare a highly efficient NiMo/Al_(2)O_(3) hydrodesulfurization catalyst,the combined effects of specific organic functional groups and alumina surface characteristics were investigated.First,the correlation between the surface characteristics of four different alumina and the existing Mo species states was established.It was found that the Mo equilibrium adsorption capacity can be used as a specific descriptor to quantitatively evaluate the changes in surface characteristics of different alumina.A lower Mo equilibrium adsorption capacity for alumina means weaker metal-support interaction and the loaded Mo species are easier to transform into MoS2.However,the Mo-O-Al bonds still exist at the metal-support interface.The introduction of cationic surfactant hecadecyl trimethyl ammonium bromide(CTAB)can further improve Mo species dispersion through electrostatic attraction with Mo anions and interaction of its alkyl chain with the alumina surface;meanwhile,the introduction of ethylenediamine tetraacetic acid(EDTA)can complex with Ni ions to enhance the Ni-promoting effect on Mo.Therefore,the NiMo catalyst designed using alumina with lower Mo equilibrium adsorption capacity and the simultaneous addition of EDTA and CTAB exhibits the highest hydrodesulfurization activity for 4,6-dimethyl dibenzothiophene because of its proper metal-support interaction and more well-dispersed Ni-Mo-S active phases.

Enhancing the CO_(2) methanation activity of Ni/CeO_(2) via activation treatment-determined metal-support interaction

The metal-support interaction is of critical importance to enhance the catalytic activity and selectivity.However,it is still challenging to construct an appropriate interaction starting from the catalyst fabrication and/or activation.We herein established low-temperature treatment of Ni^(2+)ions impregnated on ceria in reductive atmosphere and reduction-oxidation cycles as effective approachs to regulate the metal-support interaction and raise the catalytic performance in the CO_(2)methanation.The proposed construction approach yielded Ni/Ce O_(2)that displayed highly dispersed Ni nanoparticles in contact with Ce O_(2)(111)and(100)facet,higher density of surface oxygen vacancies and larger amounts of weak basic sites relative to the reference samples,which increased the capacity for H2 and CO_(2)adsorption/activation.The interaction resulted in appreciably(2-3 fold)higher activity in the CO_(2)methanation with maintaining almost full selectivity to CH4 and high stability.Coverage of Ni surface by Ce O_(2)-x thin layer as a typical structure of strong metal-support interaction resulting from high-temperature reduction,can be alleviated via reduction-oxidation cycles.We also demonstrate the activation treatment-determined metalsupport interaction effect can generally extend to(Ti O_(2)and Zr O_(2))supported Ni catalysts.

Manipulating metal-support interactions of metal catalysts for Fischer-Tropsch synthesis

For supported metal catalyst systems,the impact on catalysis originates from the interaction between metal nanoparticles and their support.Metal-support interactions(MSI)can change electronic properties,geometric morphologies,or chemical compositions of metal nanoparticles to make active sites have specific properties and catalytic activities.Fischer-Tropsch synthesis(FTS)is one of the most effective ways to convert cheap non-petroleum-based carbon sources into high value-added chemicals or ultraclean liquid fuels.In this review,we summarize and classify the impact of MSI on the catalytic activity,selectivity and stability of FTS catalysts.The strategies to tune MSI are introduced in detail,and the recent development of high-efficiency FTS catalysts through the manipulation of SMI strategies has been highlighted.It is emphasized that the active metal sites,which are endowed with special functions by MSI,can change the strength of adsorption bond of adsorbates,consequently controlling the product distribution.

Dry Reforming of Ethane over FeNi/Al-Ce-O Catalysts:Composition-Induced Strong Metal-Support Interactions

Dry reforming of ethane(DRE)has received significant attention because of its potential to produce chemical raw materials and reduce carbon emissions.Herein,a composition-induced strong metal-support interaction(SMSI)effect over FeNi/Al-Ce-O catalysts is revealed via X-ray photoelectron spectroscopy(XPS),H_(2)-temperature programmed reduction(TPR),and energy dispersive X-ray spectroscopy(EDS)elemental mapping.The introduction of Al into Al-Ce-O supports significantly influences the dispersion of surface active components and improves the catalytic performance for DRE over supported FeNi catalysts due to enhancement of the SMSI effect.The catalytic properties,for example,C_(2)H_(6) and CO_(2) conversion,CO selectivity and yield,and turnover frequencies(TOFs),of supported FeNi catalysts first increase and then decrease with increasing Al content,following the same trend as the theoretical effective surface area(TESA)of the corresponding catalysts.The FeNi/Ce-Al_(0.5) catalyst,with 50%Al content,exhibits the best DRE performance under steady-state conditions at 873 K.As observed by with in situ Fourier transform infrared spectroscopy(FTIR)analysis,the introduction of Al not only increases the content of surface Ce3+and oxygen vacancies but also promotes the dispersion of surface active components,which further alters the catalytic properties for DRE over supported FeNi catalysts.

Metal-Support Interactions on Ag/Co_(3)O_(4)Nanowire Monolithic Catalysts Promoting Catalytic Soot Combustion

Tuning metal-support interactions(MSIs)is an important strategy in heterogeneous catalysis to realize the desirable metal dispersion and redox ability of metal catalysts.Herein,we use pre-reduced Co_(3)O_(4)nanowires(Co-NWs)in situ grown on monolithic Ni foam substrates to support Ag catalysts(Ag/Co-NW-R)for soot combustion.The macroporous structure of Ni foam with crossed Co_(3)O_(4)nanowires remarkably increases the soot-catalyst contact effi ciency.Our characterization results demonstrate that Ag species exist as Ag 0 because of the equation Ag^(+)+Co^(2+)=Ag^(0)+Co^(3+),and the pre-reduction treatment enhances interactions between Ag and Co_(3)O_(4).The number of active oxygen species on the Ag-loaded catalysts is approximately twice that on the supports,demonstrating the signifi cant role of Ag sites in generating active oxygen species.Additionally,the strengthened MSI on Ag/Co-NW-R further improves this number by increasing metal dispersion and the intrinsic activity determined by the turnover frequency of these oxygen species for soot oxidation compared with the catalyst without pre-reduction of Co-NW(Ag/Co-NW).In addition to high activity,Ag/Co-NW-R exhibits high catalytic stability and water resistance.The strategy used in this work might be applicable in related catalytic systems.

In situ confined vertical growth of Co_(2.5)Ni_(0.5)Si_(2)O_(5)(OH)_(4)nanoarrays on rGO for an efficient oxygen evolution reaction

Rational design of oxygen evolution reaction(OER)catalysts at low cost would greatly benefit the economy.Taking advantage of earth-abundant elements Si,Co and Ni,we produce a unique-structure where cobalt-nickel silicate hydroxide[Co_(2.5)Ni_(0.5)Si_(2)O_(5)(OH)_(4)]is vertically grown on a reduced graphene oxide(rGO)support(CNS@rGO).This is developed as a low-cost and prospective OER catalyst.Compared to cobalt or nickel silicate hydroxide@rGO(CS@rGO and NS@rGO,respectively)nanoarrays,the bimetal CNS@rGO nanoarray exhibits impressive OER performance with an overpotential of 307 mV@10 mA cm^(-2).This value is higher than that of CS@rGO and NS@rGO.The CNS@rGO nanoarray has an overpotential of 446 mV@100 mA cm^(-2),about 1.4 times that of the commercial RuO_(2)electrocatalyst.The achieved OER activity is superior to the state-of-the-art metal oxides/hydroxides and their derivatives.The vertically grown nanostructure and optimized metal-support electronic interactions play an indispensable role for OER performance improvement,including a fast electron transfer pathway,short proton/electron diffusion distance,more active metal centers,as well as optimized dualatomic electron density.Taking advantage of interlay chemical regulation and the in-situ growth method,the advanced-structural CNS@rGO nanoarrays provide a new horizon to the rational and flexible design of efficient and promising OER electrocatalysts.

Enhancing alkyne semi-hydrogenation through engineering metal-support interactions of Pd on oxides

Supported Pd catalysts show superior activities for olefin productions from alkynes through semi-hydrogenation reactions,but over-hydrogenation into alkanes highly decreases olefin selectivity.Using phenylacetylene semi-hydrogenation as a model reaction,here we explore the optimization approaches toward better Pd catalysts for alkyne semi-hydrogenation through investigating support effect and metal-support interactions.The results show that the states of Pd with supports can be tuned by varying oxide reducibility,loading ratios,and post-treatments.In our system,0.06 wt.%Pd on rutile-TiO_(2) nanorods shows the highest activity owing to the synergistic effects of single-atoms and clusters.Support reducibility can change the filling degrees of Pd 4d orbitals through varying interfacial bonding strengths,which further affect catalytic activity and selectivity.

Exploration of Strong Metal-Support Interaction in Heterogeneous Catalysts by in situ Transmission Electron Microscopy

The phenomenon of strong metal-support interaction(SMSI)observed in supported metal catalysts,usually accompanied by the formation of the encapsulation layer on metal nanoparticles,has attracted extensive research attention due to its significance in heterogeneous catalysis.Notably,great progress has been made in recent years in investigating SMSI by in situ transmission electron microscopy(TEM),along with an enhanced comprehension of the underlying mechanisms governing SMSI formation.This emerging topic summarizes recent progress utilizing in situ TEM to study the interaction between metal and support and the relationship between the structure and performance of the supported catalyst under reaction conditions.A brief perspective about the use of in situ TEM for further study of SMSI is also presented,showing prospects in this field that will stimulate further upsurging research in promoting the catalytic efficiency of supported catalysts.

Silica-modified Pt/TiO_(2) catalysts with tunable suppression of strong metal-support interaction for cinnamaldehyde hydrogenation

Tuning Strong Metal-support Interactions(SMSI)is a key strategy to obtain highly active catalysts,but conventional methods usually enable TiO_(x) encapsulation of noble metal components to minimize the exposure of noble metals.This study demonstrates a catalyst preparation method to modulate a weak encapsulation of Pt metal nanoparticles(NPs)with the supported TiO_(2),achieving the moderate suppression of SMSI effects.The introduction of silica inhibits this encapsulation,as reflected in the characterization results such as XPS and HRTEM,while the Ti^(4+) to Ti^(3+) conversion due to SMSI can still be found on the support surface.Furthermore,the hydrogenation of cinnamaldehyde(CAL)as a probe reaction revealed that once this encapsulation behavior was suppressed,the adsorption capacity of the catalyst for small molecules like H_(2) and CO was enhanced,which thereby improved the catalytic activity and facilitated the hydrogenation of CAL.Meanwhile,the introduction of SiO_(2) also changed the surface structure of the catalyst,which inhibited the occurrence of the acetal reaction and improved the conversion efficiency of C=O and C=C hydrogenation.Systematic manipulation of SMSI formation and its consequence on the performance in catalytic hydrogenation reactions are discussed.

Achieving asymmetric redox chemistry for oxygen evolution reaction through strong metal-support interactions

Water electrolysis poses a significant challenge for balancing catalytic activity and stability of oxygen evolution reaction(OER)electrocatalysts.In this study,we address this challenge by constructing asymmetric redox chemistry through elaborate surface OO–Ru–OH and bulk Ru–O–Ni/Fe coordination moieties within single-atom Ru-decorated defective NiFe LDH nanosheets(Ru@d-NiFe LDH)in conjunction with strong metal-support interactions(SMSI).Rigorous spectroscopic characterization and theoretical calculations indicate that single-atom Ru can delocalize the O 2p electrons on the surface and optimize d-electron configurations of metal atoms in bulk through SMSI.The^(18)O isotope labeling experiment based on operando differential electrochemical mass spectrometry(DEMS),chemical probe experiments,and theoretical calculations confirm the encouraged surface lattice oxygen,stabilized bulk lattice oxygen,and enhanced adsorption of oxygen-containing intermediates for bulk metals in Ru@d-NiFe LDH,leading to asymmetric redox chemistry for OER.The Ru@d-NiFe LDH electrocatalyst exhibits exceptional performance with an overpotential of 230 mV to achieve 10 mA cm^(−2)and maintains high robustness under industrial current density.This approach for achieving asymmetric redox chemistry through SMSI presents a new avenue for developing high-performance electrocatalysts and instills confidence in its industrial applicability.

Ultrafine Pt nanoparticles supported on double-shelled C/TiO2 hollow spheres material as highly efficient methanol oxidation catalysts

Catalyst support is extremely important for future fuel cell devices.In this work,we developed doubleshelled C/TiO2(DSCT)hollow spheres as an excellent catalyst support via a template-directed method.The combination of hollow structure,TiO2 shell and carbon layer results in excellent electron conductivity,electrocatalytic activity,and chemical stability.These uniformed DSCT hollow spheres are used as catalyst support to synthesize Pt/DSCT hollow spheres electrocatalyst.The resulting Pt/DSCT hollow spheres exhibited high catalytic performance with a current density of 462 mA mg^-1 for methanol oxidation reaction,which is 2.52 times higher than that of the commercial Pt/C.Furthermore,the increased tolerance to carbonaceous poisoning with a higher If/Ibratio and a better long-term stability in acid media suggests that the DSCT hollow sphere is a promising C/TiO2-based catalyst support for direct methanol fuel cells applications.

Direct synthesis of hydrogen peroxide over Pd nanoparticles embedded between HZSM-5 nanosheets layers

Direct synthesis of hydrogen peroxide(DSHP)was studied over Pd loaded on HZSM-5 nanosheets(Pd/ZN).Pd nanoparticles with average size of ca.4.3 nm were introduced into the adjacent nanosheet layers(thickness of ca.2.9 nm)by impregnation method.Pd/ZN with theoretical Si/Al molar ratio of 25 showed the highest selectivity for H2O2 among the prepared catalysts,together with highest formation rate of H2O2(38.0 mmol·(g cat)^-1·h^-1),1.9 times than that of Pd supported on conventional HZSM-5 zeolite(Pd/CZ-50).Better catalytic performance of nanosheet catalysts was attributed to the promoted Pd dispersion which promoted H2 dissociation,more BrΦnsted acid sites and stronger metal-support interaction which inhibited the dissociation of O-O bond in H2O2.The embedded structure sufficiently protected the Pd nanoparticles by space confinement which restrained the Pd leaching,leading to a better catalytic stability with 90%activity retained after 3 cycles,which was almost 3 times than that of Pd/CZ-50(30.4%activity retained).