Gravity and Magnetic Evidence for the Geological Setting of Major Mineral Systems of the Main Metallogenic Belts in South China: A Qualitative Analysis

South China is characterized by large-area multistage magmatism.It boasts a huge number of polymetallic deposits such as W-Sn,Cu-Au,rare earth deposits,thus serving as a"giant granary"of metal mineral resources in China(Lüet al.,2021).

The first discovery of Xinlong epithermal gold deposit in southern margin of the Bangonghu-Nujiang metallogenic belt: A new expansion of gold prospecting in Northern Tibet

The Xinlong gold deposit is located in Niyma County,Naqu area of Tibet and was discovered by the Institute of Mineral Resources,Chinese Academy of Geological Sciences through the 1∶50000 mineral geological survey.The ore bodies occur in the Zenong Group volcanic rocks in the middle section of the central Lhasa subterrane and are structurally controlled by the NNW-striking faults.Four ore bodies have been found,exhibiting cloddy,dense-sparse,disseminated,and breccia structures.The ore minerals are mainly tetrahedrite group minerals,and other ore minerals include pyrite,chalcopyrite,nevskite,bornite,anglesite,native gold,and silver-gold bearing selenide,etc.The types of alteration are dominated by silicification,as well as middle-and high-graded argillization.The alteration mineral assemblages contain quzrtz,pyrophyllite,and kaolinite.The Zaliela Formation volcanic rocks of Zenong Group are silicified by later hydrothermal fluid with vuggy quartz in some fractured zones.The middle-and high-graded argillization are characterized by pyrophyllitization and kaolinization.The Xinlong gold deposit shows great metallogenetic potentiality and has been revealed by 1∶10000 geological mapping,IP sounding,and trial trenching in the mining area.Combined with the regional metallogenic geological setting,we suppose that a potential epithermal gold belt probably exists in the middle of the Lhasa terrane.The discovery of the Xinlong gold deposit opens a new chapter for the gold prospecting in Northern Tibet.

Genesis of the Nuri Cu-W-Mo Deposit,Tibet,China:Constraints from in situ Trace Elements and Sr Isotopic Analysis of Scheelite

The Nuri deposit is the only Cu-W-Mo polymetallic deposit with large-scale WO3 resources in the eastern section of the Gangdese metallogenic belt,Tibet,China.However,the genetic type of this deposit has been controversial since its discovery.Based on a study of the geological characteristics of the deposit,this study presents mineralization stages,focusing on the oxide stage and the quartz-sulfide stage where scheelite is mainly formed,referred to as Sch-A and Sch-B,respectively.Through LA-ICP-MS trace element and Sr isotope analyses,the origin,evolutionary process of the oreforming fluid and genesis of the ore deposit are investigated.Scanning Electron Microscope-Cathodoluminescence(SEMCL)observations reveal that Sch-A consists of three generations,with dark gray homogenous Sch-A1 being replaced by relatively lighter and homogeneous Sch-A2 and Sch-A3,with Sch-A2 displaying a gray CL image color with vague and uneven growth bands and Sch-A3 has a light gray CL image color with hardly any growth band.In contrast,Sch-B exhibits a‘core-rim’structure,with the core part(Sch-B1)being dark gray and displaying a uniform growth band,while the rim part(Sch-B2)is light gray and homogeneous.The normalized distribution pattern of rare earth elements in scheelite and Sr isotope data suggest that the early ore-forming fluid in the Nuri deposit originated from granodiorite porphyry and,later on,some country rock material was mixed in,due to strong water-rock interaction.Combining the O-H isotope data further indicates that the ore-forming fluid in the Nuri deposit originated from magmatic-hydrothermal sources,with contributions from metamorphic water caused by water-rock interaction during the mineralization process,as well as later meteoric water.The intense water-rock interaction likely played a crucial role in the precipitation of scheelite,leading to varying Eu anomalies in different generations of scheelite from the oxide stage to the quartz-sulfide stage,while also causing a gradual decrease in oxygen fugacity(fO2)and a slow rise in pH value.Additionally,the high Mo and low Sr contents in the scheelite are consistent with typical characteristics of magmatic-hydrothermal scheelite.Therefore,considering the geological features of the deposit,the geochemical characteristics of scheelite and the O-H isotope data published previously,it can be concluded that the genesis of the Nuri deposit belongs to porphyry-skarn deposit.

Basement Characteristics and Crustal Evolution of the Copper-Gold Metallogenic Belt in the Middle and Lower Reaches of the Yangtze River:Some Isotope Constraints

Studies of the Pb, Sr and Nd isotopic composition of Mesozoic intrusive rocks indicate that the basement of the copper-gold metallogenic belt of the middle and lower reaches of the Yangtze River has 'two-layer structure' and partly has 'multi-layered structure', and is inhomogeneous and shows the distinct feature of E-W provincialism. The calculated model lead ages (t1) are mostly greater than 2600 Ma, and the model neodymium ages (TDM) vary from 953 to 2276 Ma and concentrate in two time intervals: 1800-2000 Ma and 1200-1600 Ma. It is concluded that the basement of the MBYR is composed of the Late Archaeozoic to Middle Proterozoic metamorphic series and that the crust was initiated in the Archaean and continued to grow in the Early and Middle Proterozoic, and the proportion of new crust formed by mantle differentiation during the Late Proterozoic is low.

Trace Elements in Sphalerite from the Dadongla Zn-Pb Deposit, Western Hunan-Eastern Guizhou Zn-Pb Metallogenic Belt, South China

The western Hunan-eastern Guizhou Zn-Pb metallogenic belt is one of the important Zn-Pb mineralization regions in China.The Dadongla deposit,located in the northeast of Guizhou Province,is one of the typical Zn-Pb deposits in the region and has estimated resources more than 12 million metric tons(Mt)with an average grade of 4.11 wt%Zn+Pb.Its orebodies are hosted in the lower Cambrian Aoxi Formation dolomite,occurring as bedded,para-bedded in shape,and in conformity with the wall rock.The ore mineral assemblage is simple,dominated by sphalerite with minor pyrite and galena,and the gangue minerals are composed of dolomite,calcite with minor bitumen and barite.In view of the lack of geological and geochemical researches,the genesis of Zn-Pb ore is still unclear.Laser ablation-inductively coupled plasma mass spectrometry(LA-ICPMS)spot and mapping analyses were used to obtain sphalerite trace element chemistry in the Dadongla Zn-Pb deposit in Guizhou,China,aiming to constrain its ore genesis.The results show that sphalerite is characterized by the enrichment of Cd,Fe,Ge and Hg,corresponding with that of typical MVT deposits.Four zones were identified in the sphalerite crystal from Dadongla from the center to margin according to the color bands.in which the zone in the center,representing the early ore-stage sphalerite,is characterized by enrichment of Cd relatively,while the zone forming at late ore-stage is enriched in Ge and Hg relatively.The finding was controlled by differential leached metals content in ore-forming fluid from its source rock.Notably,critical element Ge trends to be enriched at the late ore-stage and follows a substitution of 2 Zn^2+(?)Ge^4++□(vacancy).Moreover,the calculated ore-forming temperature ranges from 79.9℃to 177.6℃by the empirical formula,which is similar to that of typical Mississippi Valley-type(MVT)deposits.Compared with the features of trace elements in sphalerite from different types of deposits,together with the geology,the Dadongla deposit belongs to an MVT Zn-Pb deposit.

Fluorite deposits in China:Geological features,metallogenic regularity,and research progress

Fluorite is one of the important mineral raw materials in the industry.In China,it is mainly distributed in the provinces and regions such as Hunan,Zhejiang,Jiangxi,Inner Mongolia,Fujian,and Henan provinces,boasting huge reserves and large numbers of deposits.However,most of the fluorite deposits are on a small or medium scale.The main fluorite deposits in China were studied in this paper.Their geological features and metallogenic regularity were summarized and compared.Meanwhile,based on their main genetic factors including metallogenic fluid sources and main metallogenic geological processes,they were divided into two groups,namely meso-epithermal deposits and magmatic-hydrothermal deposits.Furthermore,based on the prospecting achievements and research progress obtained in fluorite deposits in recent years,prospecting potential predictions were made for the metallogenic prospect areas and major prospecting areas of fluorite in China.This aims to provide a theoretical basis and direction for future fluorite prospecting in China.

Deep gold mineralization features of Jiaojia metallogenic belt,Jiaodong gold Province:Based on the breakthrough of 3000 m exploration drilling

Recently,continuous breakthroughs have been made about deep gold prospecting in the Jiaodong gold province area of China.Approximately 5000 t of cumulative gold resources have been explored in Jiaodong,which has thus become an internationally noteworthy gold ore cluster.The gold exploration depth has been increased to about 2000 m from the previous<1000 m.To further explore the mineralization potential of the Jiaodong area at a depth of about 3000 m,the Shandong Institute of Geological Sciences has drilled an exploratory drillhole named“Deep drillhole ZK01”to a depth of 3266 m.Hence,as reported herein,the mineralization characteristics of the Jiaojia metallogenic belt have been successfully documented.ZK01 is,to date,the deepest borehole with an gold intersect in China,and constitutes a significant advance in deep gold prospecting in China.The findings of this study further indicate that the depth interval of 2000 m to 4000 m below the ground surface in the Wuyi Village area incorporates 912 t of inferred gold resources,while the depth interval of 2000 m to 4000 m below the surface across the Jiaodong area possesses about 4000 t of inferred gold resources.The Jiaojia Fault Belt tends to gently dip downward,having dip angles of about 25°and about 20°at vertical depths of 2000 m and 2850 m,respectively.The deep part of the Jiaojia metallogenic belt differs from the shallow and moderately deep parts about fracturing,alteration,mineralization,and tectonic type.The deep zones can generally be categorized from inside outward as cataclastic granite,granitic cataclasite,weakly beresitized granitic cataclasite,beresitized cataclasite,and gouge.These zones exhibit a gradual transitional relation or occur alternately and repeatedly.The mineralization degree of the pyritized cataclastic granite-type ore in the deep part of the Jiaojia metallogenic belt is closely related to the degree of pyrite vein development;that is,the higher the pyrite content,the wider the veins and the higher the gold grade.Compared to the shallow gold ores,the deep-seated gold ores have higher fineness and contain joseite,tetradymite,and native bismuth,suggesting that the deep gold mineralization temperature is higher and that mantle-sourced material may have contributed to this mineralization.ZK01 has also revealed that the deep-seated ore bodies in the Jiaojia metallogenic belt are principally situated above the main fracture plane(gouge)and hosted within the Linglong Granite,contradicting previous findings indicating that the moderately shallow gold ore bodies are usually hosted in the contact zone between the Linglong Granite and Jiaodong Group or meta-gabbro.These new discoveries are particularly significant because they can help correct mineralization prospecting models,determine favorable positions for deep prospecting,and improve metallogenic prediction and resource potential evaluation.

A geochronological and geochemical study on the granodiorite porphyry and its implication for the mineralization in the Dayaoshan metallogenic belt,Southeastern China

A systematic study combining U-Pb zircon dating,lithogeochemical and Sr-Nd isotopic analyses was carried out upon the Xinping granodiorite porphyry in the Dayaoshan metallogenic belt to understand its petrogenesis and tectonic significance.LA-ICP-MS U-Pb zircon dating yielded a 442.7±5.8 Ma age,indicating that the granodiorite porphyry was emplaced during the Llandovery Silurian of the Early Paleozoic.The granodiorite porphyry shares the same geochemical characteristics such as Eu negative anomaly as other syn-tectonic granite plutons in the region,including the granodiorite porphyry in Dawangding and granite porphyries in the Dali Cu-Mo deposit and Longtoushang old deposit,indicating a similar magma evolution process.The Xinping granodiorite porphyry has high contents of SiO2(67.871.8%)and K2O(1.78-3.42%)and is metaluminous-peraluminous with A/CNK ratios ranging from 0.97 to 1.06,indicative of high-potassium calc-alkaline to calc-alkaline affinity.It is a I-type granite enriched in large ion lithophile elements Rb,Sr,while depleted in Ba and high field-strength element Nb.Tectonically,a collision between the Yunkai Block from the south and the Guangxi Yunnan-North Vietnam Block from the north during the Early Paleozoic was followed by uplifting of the Dayaoshan terrane.The Xinping granodiorite porphyry was likely emplaced during the collision.Sr-Nd isotopic analyses show that the granodiorite porphyry has initial 87Sr/86Sr ratios(Isr)of 0.7080-0.7104,εNd(t)range from-0.08 to-4.09,and t2DM between 1.19 and 1.51 Ga,well within the north-east low-value zone of the Cathaysia block,indicating a Paleoproterozoic Cathaysia basement source and an involvement of under plating mantle magma.Field observations,geochronological data,and 3D spatial distribution all lead to the conclusion that the Early Paleozoic Xinping granodiorite porphyry does not have any metallogenic and temporal relationships with the Xinping gold deposit(which has a Jurassic-Early Cretaceous age based on previous studies)but a close metallogenic relation to W-Mo mineralization.

Geological characteristics,metallogenic regularity,and research progress of lithium deposits in China

China is rich in abundant lithium resources characterized by considerable reserves and a concentrated distribution of metallogenic zones or belts,with proven reserves of 4046.8×10^(3) t(calculated based on Li_(2)O)by 2021.China is also a big consumer of lithium.By 2019,China’s lithium consumption in the battery sector alone had reached 99×10^(3) t,with an average annual growth rate of nearly 26%.China has become the world’s largest importer of lithium resources,showing a severely unbalanced relationship between supply and demand for lithium resources.Therefore,there is an urgent need for the prospecting,exploitation,and study of lithium resources in China.This study collected,organized,and summarized the data on the major lithium deposits in China,analyzed and compared the spatial-temporal distribution patterns,geological characteristics,and metallogenic regularity of these lithium deposits,and summarized the prospecting and research achievements over the last decade.The major lithium deposits in China are distributed in provinces and regions such as Qinghai,Jiangxi,Sichuan,Tibet,and Xinjiang.These deposits are mostly small in scale.According to different genetic types,this study divided lithium deposits into granitic pegmatite type,granite type,saline lake brine type,underground brine type,and sedimentary type,as well as new types including hot spring type and magmatic-hydrothermal type,and summarized the characteristics and key metallogenic factors of these different types of deposits.Sixteen metallogenic prospect areas of lithium deposits were delineated according to the deposit types and the distribution patterns of metallogenic belts.The paper introduced the research progress in major metallogenic models and lithium extraction techniques made over the past decade.Based on the comprehensive analysis of the prospecting potential of lithium deposits,the authors concluded that the future prospecting of lithium resources in China should focus on lithium metallogenic belts,the deep and peripheral areas of currently determined large-scale pegmatite-type lithium deposits,geophysical-geochemical anomalous areas with mineralization clues,and areas with developed large-scale low-grade associated granite-type and sedimentary lithium resources.The study aims to serve as a guide for the future prospecting of lithium deposits in China.

Cathodoluminescence and Trace Element Composition of Scheelite from the Middle-Lower Yangtze River Metallogenic Belt(MLYB): Implications for Mineralization and Exploration

The Middle-Lower Yangtze River Metallogenic Belt(MLYB)is known to contain abundant copper and iron porphyry-skarn deposits,with an increasing number of tungsten deposits and scheelite in Fe-Cu deposits being discovered in the MLYB during recent decades.The ore genesis of the newly-discovered tungsten mineralization in the MLYB is poorly understood.We investigate four sets of scheelite samples from tungsten,iron and copper deposits,using CL imaging and LA-ICP-MS techniques to reveal internal zonation patterns and trace element compositions.The REE distribution patterns of four studied deposits show varying degrees of LREE enrichment with negative Eu anomalies.The oxygen fugacity of ore-forming fluid increased in Donggushan,while the oxygen fugacity of ore-forming fluid decreased in Ruanjiawan,Guilinzheng and Gaojiabang.The scheelites from the Donggushan,Ruanjiawan,Guilinzheng and Gaojiabang deposits show enrichment in LREEs and HFSE,with Nb/La ratios ranging from 1.217 to 52.455,indicating that the four tungsten deposits are enriched in the volatile fluorine.A plot of(La/Lu)N versus Mo/δEu can be used to distinguish quartz vein type,porphyry and skarn tungsten deposits.This study demonstrates that scheelite grains can be used to infer tungsten mineralization and are effective in identifying magmatic types of tungsten deposits in prospective mining sites.

Molybdenite Re-Os,titanite and garnet U-Pb dating of the Magushan skarn Cu-Mo deposit,Xuancheng district,Middle-Lower Yangtze River Metallogenic Belt

The Magushan skarn Cu-Mo deposit is a representative example of the skarn mineralization occurring within the Xuancheng ore district of the Middle-Lower Yangtze River Metallogenic Belt of eastern China.The precise age of an ore deposit is important for understanding the timing of mineralization relative to other geological events in a region and to fully place the formation of a mineral deposit within the geological context of other processes that occur within the study area.Here,we present new molybdenite Re-Os and titanite and andradite garnet U-Pb ages for the Magushan deposit and use these data to outline possible approaches for identifying genetic relationships in geologically complex areas.The spatial and paragenetic relationships between the intrusions,alteration,and mineralization within the study area indicates that the formation of the Magushan deposit is genetically associated with the porphyritic granodiorite.However,this is not always the case,as some areas contain complexly zoned plutons with multiple phases of intrusion or mineralization may be distal from or may not have any clear spatial relationship to a pluton.This means that it may not be possible to determine whether the mineralization formed as a result of single or multiple magmatic/hydrothermal events.As such,the approaches presented in this study provide an approach that allows the identification of any geochronological relationships between mineralization and intrusive events in areas more complex than the study area.Previously published zircon U-Pb data for the mineralization-related porphyritic granodiorite in this area yielded an age of 134.2±1.2 Ma(MSWD=1.4)whereas the Re-Os dating of molybdenite from the study area yielded an isochron age of 137.7±2.5 Ma(MSWD=0.43).The timing of the mineralizing event in the study area was further examined by the dating of magmatic accessory titanite and skarn-related andradite garnet,yielding U-Pb ages of 136.3±2.5 Ma(MSWD=3.2)and 135.9±2.7 Ma(MSWD=2.5),respectively.The dating of magmatic and hydrothermal activity within the Magushan area yields ages around 136 Ma,strongly suggesting that the mineralization in this area formed as a result of the emplacement of the intrusion.The dates presented in this study also provide the first indication of the timing of mineralization within the Xuancheng district.providing evidence of a close genetic relationship between the formation of the mineralization within the Xuancheng district and the Early Cretaceous magmatism that occurred in this area.This in turn suggests that other Early Cretaceous intrusive rocks within this region are likely to be associated with mineralization and should be considered highly prospective for future mineral exploration.This study also indicates that the dating of garnet and titanite can also provide reliable geochronological data and evidence of the timing of mineralization and magmatism,respectively,in areas lacking other dateable minerals(e.g.,molybdenite)or where the relationship between mineralization and magmatism is unclear,for example in areas with multiple stages of magmatism,with complexly zoned plutons,and with distal skarn mineralization.

Three-dimensional P-wave Velocity Structure Modelling of the Middle and Lower Reaches of the Yangtze River Metallogenic Belt: Crustal Architecture and Metallogenic Implications

In this study,we compiled and analyzed 69310 P-wave travel-time data from 6639 earthquake events.These events(M≥2.0)occurred from 1980 s to June 2019 and were recorded at 319 seismic stations(Chinese Earthquake Networks Center)in the study area.We adopted the double-difference seismic tomographic method(tomo DD)to invert the 3-D P-wave velocity structure and constrain the crust-upper mantle architecture of the Middle and Lower Reaches of the Yangtze River Metallogenic Belt(MLYB).A 1-D initial model extracted from wide-angle seismic profiles was used in the seismic tomography,which greatly reduced the inversion residual.Our results indicate that reliable velocity structure of th e uppermost mantle can be obtained when Pn is involved in the tomography.Our results show that:(1)the pattern of the uppermost mantle velocity structure corresponds well with the geological partitioning:a nearly E-W-trending low-velocity zone is present beneath the Dabie Orogen,in contrast to the mainly NE-trending low-velocity anomalies beneath the Jiangnan Orogen.They suggest the presence of thickened lower crust beneath the orogens in the study area.In contrast,the Yangtze and Cathaysia blocks are characterized by relatively high-velocity anomalies;(2)both the ultra-high-pressure(UHP)metamorphic rocks in the Dabie Orogen and the low-pressure metamorphic rocks in the Zhangbaling dome are characterized by high-velocity anomalies.The upper crust in the Dabie Orogen is characterized by a low-velocity belt,sandwiched between two high velocity zones in a horizontal direction,with discontinuous low-velocity layers in the middle crust.The keel of the Dabie Orogen is mainly preserved beneath its northern section.We infer that the lower crustal delamination may have mainly occurred in the southern Dabie Orogen,which caused the mantle upwelling responsible for the formation of the granitic magmas emplaced in the middle crust as the low-velocity layers observed there.Continuous deep-level compression likely squeezed the granitic magma upward to intrude the upper crustal UHP metamorphic rocks,forming the'sandwich'velocity structure there;(3)high-velocity updoming is widespread in the crust-mantle transition zone beneath the MLYB.From the Anqing-Guichi ore field northeastward to the Luzong,Tongling,Ningwu and Ningzhen orefields,high-velocity anomalies in the crust-mantle transition zone increase rapidly in size and are widely distributed.The updoming also exists in the crust-mantle transition zone beneath the Jiurui and Edongnan orefields,but the high-velocity anomalies are mainly stellate distributed.The updoming high-velocity zone beneath the MLYB generally extends from the crust-mantle transition zone to the middle crust,different from the velocity structure in the upper crust.The upper crust beneath the Early Cretaceous extension-related Luzong and Ningwu volcanic basins is characterized by high velocity zones,in contrast to the low velocity anomalies beneath the Late Jurassic to Early Cretaceous compression-related Tongling ore field.The MLYB may have undergone a compressive-to-extensional transition during the Yanshanian(Jurassic-Cretaceous)period,during which extensive magmatism occurred.The near mantle-crustal boundary updoming was likely caused by asthenospheric underplating at the base of the lower crust.The magmas may have ascended through major crustal faults,undergoing AFC(assimilation and fractional crystallization)processes,became emplaced in the fault-bounded basins or Paleozoic sequences,eventually forming the many Cu-Fe polymetallic deposits there.

Geochemical Characteristics of the Tayuan Volcanic Rocks in the Daxinganling Metallogenic Belt

1 Introduction Daxinganling region is one of the most important nonferrous metal metallogenetic province(Wu et al.,2011;Li et al.,2014).The northern Daxinganling was a geological blank area in China formerly(Li et al.,2017).However,the region has a huge resource potential.Forty metal deposits have been found in the area recently。

Alteration and Mineralization Types of the Laurani Porphyry Deposit in Central-Andean Metallogenic Belt, Bolivia

1 Introduction The Laurani porphyry deposit is located in the Altiplano,an extensive North-South trending structural basin that formed in Central-Andean metallogenic belt,Bolivia.The Altiplano poly-metallic province contains sub-volcanic

Fluid inclusion and H-O isotope study of the Jiguanshan porphyry Mo deposit,Xilamulun Metallogenic Belt:implications for characteristics and evolution of ore-forming fluids

We studied the fluid inclusions of the Jiguanshan Mo deposit in China,which is a large porphyry deposit located in the southern Xilamulun Metallogenic Belt.The irregular Mo ore body with various types of hydrothermal veinlets is hosted by Late Jurassic granite porphyry.Intense hydrothermal alterations in the deposit from the core to margin are silicification-potassium feldspar alteration,pyrite-quartz-sericite-fluorite alteration,and propylitic alteration.Based on the mineral assemblages and crosscutting relationships of ore veins,the ore-forming process were divided into three stages and two substages:quartz-pyrite veins(stage I)associated with potassic alteration;quartz-molybdenite-chalcopyrite-pyrite veins(substage Ⅱ-1)and quartz-molybdenite-fluorite veins(substage Ⅱ-2)associated with phyllic alteration;and fluorite-quartz-carbonate veins(stage Ⅲ)with carbonation.Five majorfluid inclusions(FIs)types were distinguished in the quartz associated with oxide and sulfide minerals,i.e.polyphase brine(Pb-type),opaque-bearing brine(Ob-type),solid halite(S-type),two-phase aqueous(A-type),and vapor(Vtype)inclusions.The FIs of stage I were composed of liquid-rich S-,A-,and V-type FIs with homogenization temperatures and salinities of 490 to 511℃ and 8.9 to 56.0 wt%NaCl equiv.,respectively.The FIs of substage Ⅱ-1 are composed of Pb-,Ob-,S-,A-,and V-type FIs with homogenization temperatures and salinities of 352 to 460℃ and 3.7 to 46.1 wt%NaCl equiv,respectively.The FIs of substage Ⅱ-2 are Ob-,S-,A-,and V-type FIs with homogenization temperatures and salinities of 234 to309°C and 3.7 to 39.2 wt%NaCl equiv,respectively.The FIs of stage Ⅲ are A-type FIs with homogenization temperatures and salinities of 136 to 172℃ and 1.1 to 8.9 wt%NaCl equiv,respectively.Fluid boiling,which resulted in the precipitation of sulfides,occurred in stages I andⅡ.The initial ore-forming fluids of the Jiguanshan deposit had high temperature,high salinity,and belonged to an F-rich NaCl±KCl-H2O system.The fluids gradually evolved to low temperature,low salinity,and belonged to a NaCl-H2O system.Studies of the hydrogen and oxygen isotope compositions of quartz(δ^18OH2O=-7.3 to 6.3%,δDH2O=-104.3 to-83.3%)show that the ore-formingfluids gradually evolved from magmatic water to meteoric water.

Research and Application of Micromotional Exploration in the Middle-Lower Yangtze Metallogenic Belt of China

Micromotion is the daily tiny vibration of the earth’s surface. Micromotional exploration can use the surface wave information of micro motion to study the shallow structure of underground media. In this study, we collected microtremor data at 68 stations in the Middle-Lower Yangtze Metallogenic Belt (MLYMB) and determined the resonant frequency and obtained the distribution of sedimentary thickness in this area by using H/V spectral ratio. According to the results of H/V, the sedimentary layer in the basin is thick, and the predominant frequency of the basin is 0.05 - 0.1 Hz. There are no obvious lateral changes in the impedance interface between bedrock and sedimentary layer in this area. The basement of Tongling, Anqing and Luzhou mining areas and their adjacent areas is Kongling-Dongling type basement, which is composed of a set of metamorphic core complex. The predominant frequency is 0.05 - 0.1 Hz. The sedimentary thickness gradually thinned from 3800 m in the west to 2100 m in the East. Moreover, this article used SPAC (spatial autocorrelation) method to obtain the S-wave velocity structure of the mining area near Luzong. The SPAC method reveals that the depth of the interface between the loose sediments and the volcanic rocks is about 600 m in the study area near the Luzhou mining area in the Middle-Lower Yangtze Metallogenic Belt, and the average depth of the interface between the volcanic rock section and the intrusive complex section is about 1000 m. The thickness of the intrusive rock is more than 2500 m. Tourmaline is developed in the interior of the intrusive rock, which may have better exploration value.

Geology, geochronology, and exploration of the Jiama giant porphyry copper deposit (11 Mt), Tibet, China: A review

Jiama,with more than 11 Mt of copper metal,is the largest porphyry-skarn copper system in the Gangdese metallogenic belt,Tibet,China,creating ideal conditions for deciphering the origin of porphyry ores in a collision setting.Despite massive studies of the geology,chronology,petrogenesis,and ore-related fluids and their sources in Jiama,there is a lack of systematic summaries and reviews of this system.In contrast to traditional porphyry copper systems in a subduction setting,recent studies and exploration suggest that the Jiama deposit includes porphyry-type Mo-Cu,skarn-type Cu polymetallic,vein-type Au and manto orebodies.This paper reviews the latest studies on the geology,chronology,petrogenesis,fluid inclusions,and isotopic geochemistry(hydrogen,oxygen,sulfur,and lead)of the Jiama deposit.Accordingly,a multi-center complex mineralization model was constructed,indicating that multi-phase intrusions from the same magma reservoir can form multiple hydrothermal centers.These centers are mutually independent and form various orebodies or are superimposed on each other and form thick,high-grade orebodies.Finally,a new comprehensive exploration model was established for the Jiama porphyry copper system.Both models established in this study help to refine the theories on continental-collision metallogeny and porphyry copper systems.

Petrogenesis and Physicochemical Conditions of Fertile Porphyry in Non-arc Porphyry Mineralization:A Case from Habo Porphyry Cu-Mo Deposits,SW China

The Habo deposit is a typical porphyry Cu-Mo deposit in the Ailaoshan–Red River metallogenic belt.Ore minerals in the Habo deposit typically occur as veins in the monzonite porphyry.Zircon U-Pb dating suggests that the monzonite porphyry formed at 35.07±0.38 Ma.The monzonite porphyry is characterized by high SiO_(2),Al_(2)O_(3),K_(2)O and Na_(2)O contents,with A/CNK ratios ranging from 0.97 to 1.02.All samples exhibit fractionated REE patterns,characterized by high(La/Yb)N ratios(9.4–13.6,average of 11.2).They show adakite-like geochemical features,high Sr concentrations(627–751 ppm,average of 700 ppm),low Y concentrations(15.13–16.86 ppm,average of 15.81 ppm)and high Sr/Y values(39.5–47.4,average of 44.3).These samples have high initial^(87)Sr/^(86)Sr ratios(0.7074–0.7076)and negativeεNd(t)values(-5.1 to-3.7),whereas the zirconεHf(t)values range from-2.2 to+0.4,suggesting that the monzonite porphyry was derived from the partial melting of a thickened juvenile lower crust.The oxygen fugacity,calculated on the basis of the chemical composition of the amphiboles,shows?NNO values ranging from+1.65 to+2.16(average of 1.94)and lg(fO_(2))ranging from-12.72 to-11.99(average of-12.25),indicating that the monzonite porphyry has high oxygen fugacity.Zircons have high Ce^(4+)/Ce^(3+)ratios(29.29–164.24,average of 84.92),with high?FMQ values ranging from+0.50 to+1.51(average of 0.87)and high lg(fO_(2))values ranging from-14.72 to-12.85(average of-14.07),which also indicates that the oxygen fugacity of the magma was high.The dissolved water content of the Habo monzonite porphyry is 9.5–11.5 wt%,according to the geochemical characteristics,zircon-saturation thermometry(692–794°C)and the mineral phases(amphibole,no plagioclase)in the deep magma chamber.Combined with previous studies,we propose that the high oxygen fugacity and high water content of magma played key roles in controlling the formation of the Habo and other Cu-Mo-Au deposits in the Ailaoshan–Red River metallogenic belt.

Melt extraction and mineralization: A case study from the Shuangjianzishan supergiant Ag-Pb-Zn deposit(208 Mt), Inner Mongolia, NE China

The supergiant Shuangjianzishan(SJZ) Ag-Pb-Zn deposit is in the southern segment of the Great Hinggan Range(SGHR), northeast China. Previous studies suggest the ore-forming material and fluid originated from the magmatic system, and the mineralization age was consistent with the diagenetic age. However,the relationship between granitic magmatism and mineralization is still unclear in the SJZ. In this study, CH-O-He-Ar and in-situ S-Pb isotope analyses were conducted to determine the sources of ore-forming fluids and metals, which were combined with geochemistry data of SJZ granitoids from previous studies to constrain the relationship between the magmatism and the mineralization. The C-H-O-He-Ar-S-Pb isotopic compositions suggested the SJZ ore-forming material and fluids were derived from a magmatic source, which has mixed a small amount of mantle-derived materials. In addition, the disseminated sulfide from the syenogranite has comparable S-Pb isotopic composition with the sulfide minerals from ore veins,suggesting that the generation of the SJZ ore-forming fluids has a close relationship with the syenogranite magmatism. Combining with the geochemical characters of the syenogranite, the authors proposed that the mantle-derived fingerprint of the SJZ ore-forming fluid might be caused by the parent magma of the syenogranite, which was derived from partial melting of the juvenile lower crust, and underwent the residual melts segregated from a crystal mush in the shallow magma reservoir. The extraction of the syenogranite parent magma further concentrated the fertilized fluids, which was crucial to mineralization of the SJZ Ag-Pb-Zn deposit.

A 3D Geological Model Constrained by Gravity and Magnetic Inversion and its Exploration Implications for the World-class Zhuxi Tungsten Deposit, South China

The Zhuxi tungsten deposit in Jiangxi Province,South China,contains a total W reserve of about 2.86 Mt at an average grade of 0.54 wt%WO3,representing the largest W deposit in the world.Numerous studies on the metallogeny of the deposit have included its timing,the ore-controlling structures and sedimentary host rocks and their implications for mineral exploration.However,the deep nappe structural style of Taqian-Fuchun metallogenic belt that hosts the W deposit,and the spatial shape and scale of deeply concealed intrusions and their sedimentary host rocks are still poorly defined,which seriously restricts the discovery of new deposits at depth and in surrounding areas of the W deposit.Modern 3 D geological modeling is an important tool for the exploration of concealed orebodies,especially in brownfield environments.There are obvious density contrast and weak magnetic contrast in the ore-controlling strata and granite at the periphery of the deposit,which lays a physical foundation for solving the 3 D spatial problems of the ore-controlling geological body in the deep part of the study area through gravity and magnetic modeling.Gravity data(1:50000)and aeromagnetic data(1:50000)from the latest geophysical surveys of 2016-2018 have been used,firstly,to carry out a potential field separation to obtain residual anomalies for gravity and magnetic interactive inversion.Then,on the basis of the analysis of the relationship between physical properties and lithology,under the constraints of surface geology and borehole data,human-computer interactive gravity and magnetic inversion for 18 cross-sections were completed.Finally,the 3 D geological model of the Zhuxi tungsten deposit and its periphery have been established through these 18 sections,and the spatial shape of the intrusions and strata with a depth of 5 km underground were obtained,initially realizing―transparency‖for ore-controlling bodies.According the analysis of the geophysical,geochemical,and geological characteristics of the Zhuxi tungsten deposit,we discern three principles for prospecting and prediction in the research area,and propose five new exploration targets in its periphery.