Influence of Ca/P ratio on the catalytic performance of hydroxyapatite for decarboxylation of itaconic acid to methacrylic acid

Methacrylic acid,an important organic chemical,is commercially manufactured starting from fossil feedstock.The decarboxylation of itaconic acid derived for biomass is a green route to the synthesis of methacrylic acid.In view of the problems existing in the researches on this route such as use of noble metal catalyst,harsh reaction conditions and low desired-product yield,we prepared a series of hydroxyapatite catalysts with different Ca/P molar ratios and evaluated their catalytic performance.The results showed that the hydroxyapatite catalyst with a Ca/P molar ratio of 1.58 had the best catalytic activity.The highest yield of MAA up to 61.2%was achieved with basically complete conversion of itaconic acid under the suitable reaction conditions of 1 equivalent of NaOH,2 MPa of N_(2),250℃,and 2 h.On this basis,a reaction network for the decarboxylation of itaconic acid to methacrylic acid catalyzed by hydroxyapatite was established.With the aid of catalyst characterization using X-ray powder diffraction,NH3/CO2 temperature-programmed desorption,N_(2)physisorption,inductively coupled plasma optical emission spectrometry,and scanning electron microscopy,we found that the distribution of surface acid sites and basic sites,crystal growth orientation,texture properties and morphology of hydroxyapatite varied with the Ca/P molar ratio.Furthermore,the change of the crystal growth orientation and its influence on the surface acidity and alkalinity were clarified.

Ionic liquid-assisted preparation of hydroxyapatite and its catalytic performance for decarboxylation of itaconic acid

The synthesis of methacrylic acid from biomass-derived itaconic acid is a green route,for it can get rid of the dependence on fossil resource.In order to solve the problems on this route such as use of a preciousmetal catalyst and a corrosive homogeneous alkali,we prepared a series of hydroxyapatite catalysts by an ionic liquid-assisted hydrothermal method and evaluated their catalytic performance.The results showed that the ionic liquid[Bmim]BF_(4) can affect the crystal growth of hydroxyapatite,provide fluoride ion for fluorination of hydroxyapatite,and adjust the surface acidity and basicity,morphology,textural properties,crystallinity,and composition of hydroxyapatite.The[Bmim]BF4 dosage and hydrothermal temperature can affect the fluoride ion concentration in the hydrothermal system,thus changing the degree of fluoridation of hydroxyapatite.High fluoride-ion concentration can lead to the formation of CaF_(2) and thus significantly decrease the catalytic performance of hydroxyapatite.The hydrothermal time mainly affects the growth of hydroxyapatite crystals on the c axis,leading to different catalytic performance.The suitable conditions for the preparation of this fluoridized hydroxyapatite are as follows:a mass ratio of[Bmim]BF4 to calcium salt=0.2:1,a hydrothermal time of 12 h,and a hydrothermal temperature of 130℃.A maximal methacrylic acid yield of 54.7%was obtained using the fluoridized hydroxyapatite under relatively mild reaction conditions(250℃ and 2 MPa of N_(2))in the absence of a precious-metal catalyst and a corrosive homogeneous alkali.

静态混合器在MMA装置中的应用

静态混合器是一种应用于物料混合过程的重要工具,特别是化工行业,具有安全环保、经济实用、低能耗、占地面积小、适用范围广、混合效果好等优点。MMA生产流程中利用管道静态混合器最大程度地混合物料,以提高反应效率、优化反应进程、提高基础物料的利用率,同时减少设备和管道管件的检修频率。通过对MMA装置中硫酸管道静态混合器的选型进行计算分析,以及对管道静态混合器的应用、选材、安装等的探讨,从而提出管道静态混合器的优势。

交联PMMA@玻尿酸微胶囊的制备及其释放性能

为成功制备玻尿酸微胶囊,在水/油(W/O)反相乳液体系中通过自由基聚合制备了以玻尿酸水溶液为芯材、季戊四醇四丙烯酸酯(PET4A)交联甲基丙烯酸甲酯(MMA)聚合物为壁材的微胶囊。采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱仪(FTIR)、激光散射粒度分布分析仪(LSPSDA)、紫外分光光度计(UV)对微胶囊的形貌、结构、粒径分布、包覆率及释放性能进行了表征。结果表明:微胶囊具有不规则球形及核壳结构形貌。当油水比为10∶1、芯壁比为1∶1、玻尿酸用量为1.5 mg/mL、交联剂添加量为0.67%(相对于壁材)时,微胶囊包覆率与载药率分别达到极大值81.40%和1.221%,表面形貌最好,其粒径在1.4~2.0μm之间。微胶囊累计释放量随交联剂用量的升高而下降,同时微胶囊具有pH响应性,pH=5.5时累计释放量最大。

Characterization and Thermal Conductivity of Modified Graphite/Fatty Acid Eutectic/PMMA Form-Stable Phase Change Material

We prepared and characterized a form-stable composite phase change material （PCM） with higher thermal conductivity. Capric acid（CA）-myristic acid（MA） eutectic as core, poly-methyl methacrylate （PMMA） as supportive matrix and modified graphite （MG） powders serving as the thermal conductance improver were blended by bulk- polymerization method. The composite PCMs with different MG mass fraction （2%, 5%, 7%, 10% and 15%） were characterized by FT-IR, SEM, DSC technique and mechanical tests. Thermal conductivities of the composites were measured by transient hot-wire method. The results indicate that MG powders have been successfully inserted into the CA-MA/PMMA matrix without any chemical reaction with each other. The MG/CA-MA/PMMA composites maintain good thermal storage performance while the thermal conductivity has been enhanced significantly. The composite PCM added with 15 wt% MG powders increases approximately as 195.9% in thermal conductivity. Moreover, the thermal conductivity improvement of the composite PCMs is also verified by the melting-freezing experiment, which is profitable for the heat transfer efficiency in latent heat thermal energy storage system.

Process design and economic analysis of methacrylic acid extraction for three organic solvents

In this work,a techno-economic study for the solvent based extraction of methacrylic acid from an aqueous solution is presented.The involved phase equilibrium calculations in process design are verified by measured experimental data.First,experiments are conducted with different solvent candidates to measure LLE(liquid–liquid equilibrium)data and to establish the effects of extraction temperature and dosage of solvent.Next,the binary interaction parameters for the UNIQUAC model to be used for equilibrium calculations are fine-tuned with measured data.Then,a process for the solvent based extraction of methacrylic acid recovery is designed and verified through simulation with the regressed UNIQUAC model parameters.The optimal configuration of the process flowsheet is determined by minimizing the total annualized cost.Among the three solvent candidates considered-cyclohexane,hexane and toluene-the highest efficiency and the lowest total annualized cost is found with toluene as the solvent.

CONFORMATIONAL CHARACTERISTICS OF POLY(ACRYLIC ACID) AND POLY(METHACRYLIC ACID)

A full-relaxation optimization of molecule and the Dreiding force field are employed to obtain the geometry parameters and the conformational energy surfaces of meso or racemic dyad of poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA). Three different carbonyl-bond orientations of side-groups resulted in the differences in depth of potential wells in their energetic contours for a meso or a racemic dyad. These discrepancies are interpreted as a result of various fine structures corresponding to grid search conformations as well as thereby different interactions. The analysis on the most stable conformations of PMAA confirmed that the ester groups are nearly perpendicular to the plane defined by the two adjacent skeletal bonds but may possibly change their relative orientations to meet the requirement of lower energy during the conformational state transition. For each polymer, two global energy maps of a meso and a racemic dyad were finally constructed from the superposition of energy data for the three kinds of side-group orientations by the Boltzmann factors. From an ensemble average, the proposed scheme with three rotational isomeric states (RIS) allowed us to access the experimentally unperturbed dimensions of PAA chain via the configurational statistical mechanics. Although the calculation was based on the short-range, local interactions, it was interested to note that the experimental characteristic ratios just fell within the range calculated for atactic chains.

Synthesis,Characterization and Catalytic Application of H_3PW_(12)O_(40)/MCM-48 in the Esterification of Methacrylic Acid with n-butyl Alcohol

A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H3PW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H3PW12O40/MCM-48 is an excellent catalyst for synthesizing n-butyl methacrylate and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）：n（n-butyl alcohol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.6, mass ratio of catalyst used to the reactants is 0.5% and reaction time is 2.0 h. Under these conditions, the yield of n-butyl methacrylate can reach 93.7%.

Nitroxide-Mediated Photo-Controlled/Living Radical Polymerization of Methacrylic Acid

The photo-controlled/living radical polymerization of methacrylic acid (MAA) was performed at room temperature by irradiation with a high-pressure mercury lamp using azo initiators and 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl as the mediator in the presence of (4-tert-butylphenyl)diphenylsulfonium triflate (tBuS) as the accelerator. Whereas the bulk polymerization yielded polymers with a bimodal molecular weight distribution in both the absence and presence of tBuS, the solution polymerization in methanol produced unimodal polymers with the molecular weight distribution of 2.0 - 2.3 in the presence of tBuS. The molecular weight distribution of the resulting poly (MAA) decreased with an in- crease in tBuS. The dilution of the monomer concentration also reduced the molecular weight distribution. The use of the initiator with a low 10-h half-life temperature also effectively controlled the molecular weight. The livingness of the polymerization was confirmed by obtaining linear increases in the first-order conversion versus time, the molecular weight versus the conversion, and the molecular weight versus the reciprocal of the initiator concentration.

Preparation,Characterization and Service Performance of Fatty Acid/PMMA Shape-Stabilized Phase Change Material

A series of fatty acid/poly methyl methacrylate(PMMA) shape-stabilized phase change materials(PCMs) have been prepared by bulk polymerization method.In the composite,fatty acid(capric acid,stearic acid,and their eutectic mixture) acts as core material and PMMA serves as matrix,which coats the fatty acid to prevent the leakage of melted fatty acid.The prepared shape-stabilized PCMs were characterized on the morphology,phase change behavior,chemical characterization and thermal properties.The results indicate that the composites with proper phase change temperature and latent heat are able to keep solid morphology in macro level during thermal storage process.Thermal cycling test also indicates that the composite PCMs have good thermal reliability.Moreover,thermal conductivity and thermal performance are investigated and the results show that the shape-stabilized PCMs have the higher thermal conductivity than fatty acid and exhibited good thermal performance in controlling the atmosphere temperature.

PROPERTIES AND SYNTHESIS OF NEW SUPPORTS FOR IMMOBILIZATION OF ENZYMES BY COPOLYMERIZATION OF VINYLENE CARBONATE AND METHACRYLIC ACID

Methacrylic acid first was neutralized with an aqueous solution of NaOH to pH = 6.0 similar to 7.0, vinylene carbonate (VCA) was added to the solution, then monomers were copolymerized in paraffin oil by means of reverse-phase suspension polymerization and hydrophilic copolymeric supports were prepared. The properties of the supports were determined using trypsin and results show that the amount of enzymes coupled to the supports and the specific activity of immobilized trypsin are related to the content of VCA structure units, reaction time and concentration of enzyme solution, etc.

Highly efficient Rod-shape Poly(methacrylic acid-co-styrene-codivinylbenzene)High-performance Liquid Chromatographic Column

A highly efficient copolymer (methacrylic acid - co - styrene - divinylbenzene) in situ making high-performance liquid chromatographic column was prepared and evaluated. The column efficiency calculated in terms of height equivalent to a theoretical plate was 25 mu m and rapid separations of small molecules such as substituted aromatic hydrocarbons and aromatic acids were achieved within five minutes.

INFLUENCES OF ACID POST-TREATMENT ON THE MORPHOLOGY OF SOAP-FREE P(MMA-EA-MAA)PARTICLES PREPARED BY SEEDED EMULSION POLYMERIZATION

Soap-free poly（methyl methacrylate-ethyl acrylate-methacrylic acid） latex particles with narrow size distribution were synthesized by seeded emulsion polymerization, and the porous particles were created by a stepwise alkali/acid treatment method. Effects of acid treatment conditions on the particle morphology were investigated. Results show that one to three pores were formed inside most of particles after post-treatment. At pH 7.0, when the treatment temperature was lower than 70℃, the size of particles and the volume of pores remained almost unchanged, and these two values increased significantly when the temperature was higher than 70℃. Both the particle size and the pore volume decreased with the increase of initial pH value and treatment time in the acid treatment. As the pH was below 4.0 and the treatment time was longer than 180 min, the particles shrunk in size.

A NEW METHOD FOR THE SYNTHESIS OF METHACRYLIC ACID FROM ISOBUTYRALDEHYDE

Isobutyraldehyde was used as starting material via three steps: oxidation, chlorination and dehydro-chlorination to yield methacrylic acid. The total yield of methacrylic acid is 49.7%.

The Effect of Methacrylic Acid and Maleic Acid on the Isothermal Kinetics of Acrylic Acid Crosslinking Co-polymerization under Conventional and Microwave heating

The kinetics of free-radical crosslinking co-polymerization(FRCCP)of acrylic acid(AA)with both methacrylic acid(MA)(PAMA hydrogel)and maleic acid(MAL)(PAMAL hydrogel)was investigated under the conditions of isothermal conventional heating(CH)and under the conditions of microwave heating(MWH)with controlled cooling.The kinetics curves of FRCCP of PAMA and PAMAL hydrogels under the conditions of CH are described with the kinetics model of second order chemical reaction,whereas the kinetics curves under the conditions of CH are described with the kinetics model of Polany-Winger.It is proved that MWH leads to the changes in the rate of FRCCP and to the changes in the values of the kinetic parameters activation energy(Ea)and pre-exponential factor(lnA).It was found the existence of relationship between the values of the kinetic parameters calculated for MWH and CH for PAMA and PAMAL hydrogel synthesis process,which is well-known as compensation effect.The effect of MWH on the kinetics of FRCCP for PAMA and PAMAL hydrogel formation were explained by applying the model of activation by selective energy transfer(SET).The changes in kinetics model,rate of FRCCP and kinetics parameters,caused with the MWH can found wide application in designing novel technologies for obtaining polymers and for synthesis of polymers with novel physico-chemical properties.The suggested mechanism of activation for polymerisation under the conditions of MWH also enables development of novel reaction systems and technologies for polymers productions.

MMA-co-GMA增容PBAT/PLA共混材料结构与性能

利用甲基丙烯酸甲酯-甲基丙烯酸缩水甘油酯无规共聚物(MG)为相容剂,采用熔融共混法制备了聚对苯二甲酸-己二酸丁二醇酯(PBAT)和聚乳酸(PLA)生物降解共混材料。MG中的环氧官能团与PBAT和PLA中的端基之间的增容反应生成PBAT-co-MG-co-PLA大分子相容剂提高二者之间的相容性。MG的加入导致PLA相的最大分解速率温度明显向高温方向移动,耐热性提高,而PBAT相最大分解速率温度几乎没有变化。MG的增容作用促进了PBAT相的均匀分散、较小的粒子尺寸和窄的分布。动态流变测试结果表明,PBAT/PLA/MG共混材料比PBAT/PLA共混物具有更高的复数黏度和储能模量,增容反应增加了界面相互作用和熔体强度。同PBAT/PLA共混材料相比,MG的增容作导致PBAT/PLA/MG共混物表现出更高的冲击韧性、断裂伸长率和拉伸强度。

Swelling and Drug Release Characteristics of Poly （methacrylic acid-co-poloxamer） hydrogels

Poly (methacrylie acid co-poloxamer) hydrogel networks were synthesized by free-radical solution polymerization, and the dynamic swelling and in vitro release properties of model drugs, dextromethorphan hydrobromide (DMP) and vitamin B12 (VB12) were studied. These gels exhibited pH-dependant swelling and sustained drug release properties, and the water uptake rate and drug release rate in neutral or basic media were higher than that in acidic media. The results showed that the water uptake followed non-Fickian or zero order process in neutral or basic media, and the release of model drugs from hydrogels of appropriate composition was of zero order kinetics over a period of several hours.

SOLID PHASE GRAFT COPOLYMERIZATION OF POLYPROPYLENE AND METHACRYLIC ACID

The solid phase graft copolymerization of polypropylene (PP) andmethacrylic acid (MAA) was investigated. benzoyl peroxide(BPO) wasused as initia- tor. The influence of the reactive time,concentration of initiator and monomer on degree of graft and meltflow index of graft copolymer(PP-MAA) was discussed. The effect ofgraft copolymer on mechanical properties of The glass fibre (GF)reinforced PP composites was also Studied. It is proved that graftcopolymer could obviously Increase the interfacial adhesive strengthbetween PP and GF.

绿色水处理药剂的合成及其与静电场协同性能研究

采用不含磷氮的药剂衣康酸(IA)和甲基丙烯磺酸钠(SMAS)合成了环保型的两元共聚物药剂,并系统研究了合成工艺条件对共聚物性能的影响。最终得到最佳合成条件如下:原料质量比(IA∶SMAS)为2∶1,聚合温度为95℃,聚合时间为6 h;此外,引发剂和链转移剂的添加量均为原料总质量的5%。经静态阻垢实验研究表明,合成的共聚物具有优异的阻垢性能和分散性能。将该共聚物与静电场结合用于阻垢性能研究,结果表明静电场的存在使IA/SMAS的阻垢性能提高了17%,静电与IA/SMAS共聚物具有协同增效作用。