Efficiency and Effectiveness Method versus ε-NTU Method with Application in Finned Flat Tube Compact Heat Exchanger with Water-Ethylene Glycol as Nanofluid Base of Iron Oxide Nanoparticles

This work aims to establish comparisons between two models used for the performance of heat exchangers. The chosen system, in this case, consists of a heat exchanger used in automotive radiators flat finned tube type. Water and ethylene glycol compound as base fluid and volume fractions of iron oxide nanoparticles (Fe3O4) are used as a refrigerant. The quantities determined in this work are the nanofluid exit temperature, the air exit temperature, the absolute error between the models for heat transfer rate, and Effectiveness. The quantities that constitute parameters, independent variables, are the airflow, represented by the Reynolds number, and the iron oxide volume fraction. Ethylene Glycol 50% compound has slightly better thermal performance than pure water and reduces the reactive effect of water on the environment, increasing the average life of the equipment. The absolute relative error between the models is less than 20% and presents maximum values with the increase of the nanoparticle volume fraction and growth in the Reynolds number for the air.

Viewing English Teaching and Test Method from a Brand-new Perspective

There has been close relationship between English test method and teaching method. When we make great efforts to reform the English teaching method we should improve the English test method. In this way, we can increase the test efficiency, trustiness, English teaching quality and evaluation function, to transform the teaching from examination-oriented education into quality education.

High Efficient Methods of Content-based 3D Model Retrieval

Content-based 3D model retrieval is of great help to facilitate the reuse of existing designs and to inspire designers during conceptual design. However, there is still a gap to apply it in industry due to the low time efficiency. This paper presents two new methods with high efficiency to build a Content-based 3D model retrieval system. First, an improvement is made on the ＂Shape Distribution （D2）＂ algorithm, and a new algorithm named ＂Quick D2＂ is proposed. Four sample 3D mechanical models are used in an experiment to compare the time cost of the two algorithms. The result indicates that the time cost of Quick D2 is much lower than that of D2, while the descriptors extracted by the two algorithms are almost the same. Second, an expandable 3D model repository index method with high performance, namely, RBK index, is presented. On the basis of RBK index, the search space is pruned effectively during the search process, leading to a speed up of the whole system. The factors that influence the values of the key parameters of RBK index are discussed and an experimental method to find the optimal values of the key parameters is given. Finally, ＂3D Searcher＂, a content-based 3D model retrieval system is developed. By using the methods proposed, the time cost for the system to respond one query online is reduced by 75% on average. The system has been implemented in a manufacturing enterprise, and practical query examples during a case of the automobile rear axle design are also shown. The research method presented shows a new research perspective and can effectively improve the content-based 3D model retrieval efficiency.

Screening efficiency and screen length of a linear vibrating screen using DEM 3D simulation

The effect of screen length on the screening efficiency of particles is studied under various single parameter conditions including frequency, amplitude, vibration angle, and screen inclination. The Discrete Element Method (DEM) has been used to simulate the screening process. A functional relationship between screening efficiency and screen length is established. It is shown that screening efficiency and screen length have a complicated exponential relationship. Relationships between them are profoundly discussed and conclusions are easily drawn: low values of the parameters do not benefit screening; screening efficiency generally increases with screen length; screening efficiency reaches a plateau when these parameters are in range frequently encountered in practical applications.

Simulation Methods of Stochastic Volatility Interest Rate Term Structure

A term structure model bearing features of stochastic volatility and stochastic mean drift with jump （SVJ-SD model for short） is built in the paper to describe the stochastic behavior of interest rates.Based on sample data of an interest rate of national bond repurchase,maximum likelihood （ML）,linear Kalman filter and efficient method of moments （EMM） are used to estimate the model.While ML works well for simple models,it may lead to considerable deviation in parameter estimation when dynamic risks of interest rates are considered in them.Linear Kalman filter is a tractable and reasonably accurate technique for estimation cases where ML was not feasible.Moreover,when compared with the first two approaches,using EMM can obtain better parameter estimates for complex models with non-affine structures.

Empirical Analysis of Forest Pest Control Efficiency from 2003 to 2014 in China

Three indexes including forest pest occurrence area,control area and input fund of 31 provinces from 2003 to 2014 were selected from Forestry Statistical Yearbook,to establish dynamic interaction index evaluation system with clustering robust regression model and Stata 13. 0 software. Total forest pest control efficiency in China was determined according to the computing result of entropy method. Suggestions such as improving forest pest control efficiency,increasing service efficiency and input amount of forest pest control input funds were put forward. It will provide empirical basis for target management evaluation of forest pest control work and accountability system.

Fourier time spectral method for subsonic and transonic flows

The time accuracy of the exponentially accurate Fourier time spectral method（TSM） is examined and compared with a conventional 2nd-order backward difference formula（BDF） method for periodic unsteady flows. In particular, detailed error analysis based on numerical computations is performed on the accuracy of resolving the local pressure coefficient and global integrated force coefficients for smooth subsonic and non-smooth transonic flows with moving shock waves on a pitching airfoil. For smooth subsonic flows, the Fourier TSM method offers a significant accuracy advantage over the BDF method for the prediction of both the local pressure coefficient and integrated force coefficients. For transonic flows where the motion of the discontinuous shock wave contributes significant higherorder harmonic contents to the local pressure fluctuations,a sufficient number of modes must be included before the Fourier TSM provides an advantage over the BDF method.The Fourier TSM, however, still offers better accuracy than the BDF method for integrated force coefficients even for transonic flows. A problem of non-symmetric solutions for symmetric periodic flows due to the use of odd numbers of intervals is uncovered and analyzed. A frequency-searching method is proposed for problems where the frequency is not known a priori. The method is tested on the vortex shedding problem of the flow over a circular cylinder.

Power recovery method for testing the efficiency of the ECD of an integrated generation unit for offshore wind power and ocean wave energy

Offshore wind power and ocean wave energy are clean,renewable and rich resources.The integrated generation unit for the two

Digital high-efficiency print forming method and device for multi-material casting molds

Sand mold 3D printing technology based on the principle of droplet ejection has undergone rapid development in recent years and has elicited increasing attention from engineers and technicians.However,current sand mold 3D printing technology exhibits several problems,such as single-material printing molds,low manufacturing efficiency,and necessary post-process drying and heating for the manufacture of sand molds.This study proposes a novel high-efficiency print forming method and device for multi-material casting molds.The proposed method is specifically related to the integrated forming of two-way coating and printing and the shortflow manufacture of roller compaction and layered heating.These processes can realize the high-efficiency print forming of high-performance sand molds.Experimental results demonstrate that the efficiency of sand mold fabrication can be increased by 200%using the proposed two-way coating and printing method.The integrated forming method for layered heating and roller compaction presented in this study effectively shortens the manufacturing process for 3D-printed sand molds,increases sand mold strength by 63.8%,and reduces resin usage by approximately 30%.The manufacture of multi-material casting molds is demonstrated on typical wheeled cast-iron parts.This research provides theoretical guidance for the engineering application of sand mold 3D printing.

Low-cost method of fabricating large-aperture,high efficiency,Fresnel diffractive membrane optic using a modified moir technique

To reduce the cost and achieve high diffraction efficiency, a modified moir@ technique for fabricating a large- aperture multi-level Fresnel membrane optic by a novel design of alignment marks is proposed. The modified moire fringes vary more sensitively with the actual misalignment. Hence, the alignment accuracy is significantly improved. Using the proposed method, a 20 μm thick, four-level Fresnel diffractive polyimide membrane optic with a 200 mm diameter is made, which exhibits over 62% diffraction efficiency into the ＋1 order, and an efficiency root mean square of 0.051.

Energy-Efficient Transceiver Design for Multi-Pair Two-Way Relay Systems

In this paper, we focus on energy-efficient transceiver and relay beamforming design for multi-pair two-way relay system. The multi-antenna users and the multi-antenna relay are considered in this work. Different from the existing works, the proposed algorithm is energy-efficient which is more applicable to the future green network. It considers both the sum-MSE problem and the power consumption problem for the users under the relay power constraint. Based on the optimal condition decomposition(OCD) method, the energy-efficient precoders at the users can be designed separately with limited information exchanged. The proposed relay beamforming algorithm is based on the alternative direction method of multipliers(ADMM) which has simpler iterative solution and enjoys good convergence. Simulation results demonstrate the performance of the proposed algorithms in terms of power consumption and MSE performance.

Did Ecological Engineering Projects Have a Significant Effect on Large-scale Vegetation Restoration in Beijing-Tianjin Sand Source Region, China？ A Remote Sensing Approach

Aiming for the restoration of degraded ecosystems, many ecological engineering projects have been implemented around the world. This study investigates the ecological engineering project effectiveness on vegetation restoration in the Beijing-Tianjin Sand Source Region(BTSSR) from 2000 to 2010 based on the rain use efficiency(RUE) trend in relation to the land cover. More than half of the BTSSR experienced a vegetation productivity increase from 2000 to 2010, with the increasing intensity being sensitive to the indicators chosen. A clear tendency towards smaller increasing areas was shown when using the net primary productivity(NPP, 51.30%) instead of the accumulated normalized difference vegetation index(59.30%). The short-term variation in the precipitation and intra-seasonal precipitation distribution had a great impact on the remote sensing-based vegetation productivity. However, the residual trends method(RESTREND) effectively eliminated this correlation, while incorporating the variance and skewness of the precipitation distribution increased the models′ ability to explain the vegetation productivity variation. The RUE combined with land cover dynamics was valid for the effectiveness assessment of the ecological engineering projects on vegetation restoration. Particularly, the result based on growing season accumulated normalized difference vegetation index(ΣNDVI) residuals was the most effective, showing that 47.39% of the BTSSR experienced vegetation restoration from 2000 to 2010. The effectiveness of the ecological engineering projects differed for each subarea and was proportional to the strength of ecological engineering. The water erosion region dominated by woodland showed the best restoration, followed by the wind-water erosion crisscross regions, while the wind erosion regions dominated by grassland showed the worst effect. Seriously degraded regions still cover more area in the BTSSR than restored regions. Therefore, more future effort should be put in restoring degraded land.

A New Method to Measure the Coupling Efficiency of Waveguide Photodetector

In this paper, a new method is outlined for the estimation of coupling efficiency between a source laser and a WGPD. Internal quantum efficiencies as high as 72% (for 0.15μm device) and 86.5% (for 0.5μm device) are achieved.

Estimation method of glottal vocal efficiency based on conversion function of voice source

This investigation was designed to approach a novel estimation method of glottal vocal efficiency (GVE) based on conversion function of voice source. The conversion function of voice source was defined the ratio of supra-glottal acoustic voice source signal to the glottal air volume flow velocity waveform in frequency domain. A carefully designed in vivo canine larynx experiment and several human experiments including different vowels, pressed, falsetto, breath and typical laryngeal diseases were adopted to demonstrate this alternative GVE method. Compared with other vocal efficiency, it is shown that this method could eliminate the contribution from the super vocal tract transmission and resonance to GVE, and reflect the differences of phonation modes. The average magnitude of this conversion function in frequency domain represents GVE, and the variation of the magnitude in fundamental frequency is identical to AC/DC value.

Second-order sensitivity of eigenpairs in multiple parameter structures

This paper presents methods for computing a second-order sensitivity matrix and the Hessian matrix of eigenvalues and eigenvectors of multiple parameter structures. Second-order perturbations of eigenvalues and eigenvectors are transformed into multiple parameter forms,and the second-order perturbation sensitivity matrices of eigenvalues and eigenvectors are developed.With these formulations,the efficient methods based on the second-order Taylor expansion and second-order perturbation are obtained to estimate changes of eigenvalues and eigenvectors when the design parameters are changed. The presented method avoids direct differential operation,and thus reduces difficulty for computing the second-order sensitivity matrices of eigenpairs.A numerical example is given to demonstrate application and accuracy of the proposed method.

Rapid and efficient method for isolating plant high molecular weight(HMW)DNA with high purity

PREPARATION of HMW DNA (Megabase-size) is the basis for construction of genomic library with large DNA inserts such as bacterial artificial chromosome (BAC) and yeast artificial chromosome (YAC), and for long-range physical mapping. It can also be used for the macro-study of repeat sequences. Since HMW DNA during preparation is inclined to be sheared physically and digested by internal nucleases, it is very difficult to prepare the HMW DNA. Initially, plant HMW DNA was prepared by embedding protoplasts in the low melting-point (LMP) agarose; however, it had several disadvantages: (ⅰ) Culture of protoplasts was time-consuming, costly and tedious. ( ⅱ ) It was only used successfully for limited

A new evaluation method for site selection of large underground water-sealed petroleum storage depots

Scientific site selection is the first step in constructing underground water-sealed petroleum storage depots, but no uniform standard and code for such activity has been established. Therefore, the main objective of this study is to propose an evaluation method for the site selection of an underground water-sealed petroleum storage depot. The first large underground water-sealed petroleum storage depot being built in China served as the background of this study. The following 12 indexes were used as evaluation factors based on comprehensive evaluation criteria and specifications for key project site selection: geographic structure development feature, topographic feature, lithostratic formation feature, crustal stress, strength of rock mass, joint development feature, hydrogeological conditions, long-term water sealing conditions, environmental/ecological vulnerability, regional stability, technical and economic conditions, and meteorological and hydrological conditions. The weight back analysis and power coefficient methods were also used to evaluate the site selected for the first underground water-sealed petroleum storage depot project. Petroleum site classification models based on the two aforementioned methods were established and used to verify the feasibility of the evaluation criteria and methods, and the evaluation results show the grade of the site selected for the underground water-sealed petroleum storage depot in Huangdao, China is good. The study results may be used as a reference for the site selection of future underground water-sealed petroleum storage depots.

AN EFFICIENT AND TARGET-ORIENTED SAMPLE ENRICHMENT METHOD FOR PREPARATIVE SEPARATION OF MINOR ALKALOIDS BY PH-ZONE-REFINING COUNTER-CURRENT CHROMATOGRAPHY

A sample enrichment method focusing on the minor targeted components was established to help them to be successfully separated by pH-zone refining CCC.Seven minor indole alkaloids in Uncaria rhynchophylla(Miq.)Miq.ex Havil(UR)were chosen to show the advantage of this method.The sample enrichment and separation were

A highly efficient method for enriching TALEN or CRISPR/Cas9-edited mutant cells

In recent years,genome editing with site-specific nucleases,such as ZFN（zinc finger nuclease）,TALEN（transcription activatorlike effector nucleases）,and CRISPR/Cas9（the type II bacterial clustered,regularly interspaced,short palindromic repeats-associated protein 9）,has gained popularity for use in cell lines,animals,and plants（Urnov et al.,2010;Miller et al.,2011;Cong et al.

An efficient method for designing variable digital filters

The digital filters with adjustable frequency-domain characteristics are called variable filters. Variable filters are useful in the applications where their characteristics are required to be changeable during the course of signal processing. Generally speaking, the variable frequency responses of a variable filters are the functions of a set of spectral parameters defining the desired frequencyUomain characteristics. In this paper, we first sample the given variable maghtode specifications and use them to construct a multi-dimensional (M - D) specification array, then propose an outer product expansion method for expanding it as the sum of the outer products of vectors. Using the outer product expansion, we can simplify the difficult problem of desighng a variable filter as the easy one that only needs constant 1 - D filter designs and 1 - D polynoIhal approximations. The method can obtain variable filters having arbitrary desired variable magnitude characteristics with a high design acctiracy.