Local singularity and S–A methods for analyzing ore-producing anomalies in the Jianbiannongchang area of Heilongjiang,China

The Heilongjiang Jianbiannongchang area is located at the confluence of the Great and Lesser Xing’an Ranges.This area has a complex magmatic and tectonic evolutionary history that has resulted in a complex and diverse geological background for mineralization.In this study,isometric logarithmic ratio(ILR)transformations of Au,Cu,Pb,Zn,and Sb contents were performed in the1:50,000 soil geochemical data of the Jianbiannongchang area.Robust principal component analysis(RPCA)was conducted based on ILR transformation.The local singularity and spectrum-area(S-A)methods were used to extract information on mineralogic anomalies.The results showed that:(1)the transformed data eliminated the influence of the original data closure effect,and the PC1and PC2 information obtained by applying RPCA reflected ore-producing element anomalies dominated by Au and Cu.(2)The local singularity method can enhance the information of the local strong and weak slow anomalies.After performing local singularity analysis on PC1 and PC2,the obtained local anomalies reflected the local singularity spatial anomaly patterns related to Cu and Au mineralization in this area,which is an effective method for trapping ore-producing anomalies.(3)Furthermore,the composite anomaly decomposition of PC1 and PC2 was performed using the S-A method,and the screened anomalous and background fields reflect the ore-producing anomalies related to Cu and Au mineralization.This information is in agreement with known Cu and Au mineralization.(4)The geochemical anomalies with mineralization potential were obtained outside the known mineralization sites by integrating the information of oreproducing anomalies extracted by the local singularity and S-A methods,providing the theoretical basis and exploration direction for future exploration in the study area.

Relationship between sonographically measured median nerve cross-sectional area and presence of peripheral neuropathy in diabetic subjects

BACKGROUND Neuropathy is a common complication of diabetes mellitus resulting from direct damage by hyperglycemia to the nerves and/or ischemia by microvascular injury to the endoneurial vessels which supply the nerves. Median nerve is one of the peripheral nerves commonly affected in diabetic neuropathy. The median nerve size has been studied in non-Nigerian diabetic populations. In attempt to contribute to existing literature, a study in a Nigerian population is needed.AIM To evaluate the cross-sectional area(CSA) of the median nerve using B-mode ultrasonography(USS) and the presence of peripheral neuropathy(PN) in a cohort of adult diabetic Nigerians.METHODS Demographic and anthropometric data of 85 adult diabetes mellitus(DM) and 85 age-and sex-matched apparently healthy control(HC) subjects were taken. A complete physical examination was performed on all study subjects to determine the presence of PN and modified Michigan Neuropathy Screening Instrument(MNSI) was used to grade its severity. Venous blood was taken from the study subjects for fasting lipid profile(FLP), fasting blood glucose(FBG) and glycated haemoglobin(HbA1 c) while their MN CSA was evaluated at a point 5 cm proximal to(5 cmCATL) and at the carpal tunnel(CATL) by high-resolution Bmode USS. Data was analysed using SPSS version 22.RESULTS The mean MN CSA was significantly thicker in DM subjects compared to the HC at 5 cmCATL(P < 0.01) and at the CATL(P < 0.01) on both sides. The presence of diabetic peripheral neuropathy(DPN) further increased the MN CSA at the CATL(P < 0.05) but not at 5 cmCATL(P > 0.05). However, the severity of DPN had no additional effect on MN CSA 5 cm proximal to and at the CATL. There was no significant association between MN CSA and duration of DM and glycemic control.CONCLUSION Thickening of the MN CSA at 5 cmCATL and CATL is seen in DM. Presence of DPN is associated with worse thickening of the MN CSA at the CATL but not at5 cmCATL. Severity of DPN, duration of DM, and glycemic control had no additional effect on the MN CSA.

Ultrasonographic measurement of median nerve cross-sectional area reference values in a healthy Han population from Guiyang,China

High-resolution ultrasonography was used to analyze the nerve cross-sectional area （CSA） of the median nerve at 7 sites： the wrist crease, pisiform bone, hamate bone, 6 cm proximal to the tip of the wrist crease, proximal forearm （where the nerve enters the pronator teres muscle）, 4 cm proximal to the tip of the medial epicondyle, and mid-humerus （mid-point between elbow crease and axilla） in 200 healthy volunteers from Guiyang, China. Results showed similar CSA values between the left and right sides, but the CSA 6 cm proximal to the tip of the wrist crease, proximal forearm, 4 cm proximal to tip of the medial epicondyle, and mid-humerus in males was greater than that of females. Moreover, CSA values at the wrist crease, pisiform bone, and hamate bone were greater in the middle-aged and old groups when compared to the young group, and correlated with body mass and height. Thus, reference values of median nerve CSA of the upper limbs can facilitate the analysis of abnormal nerve conditions.

Does the ratio of the carpal tunnel inlet and outlet cross-sectional areas in the median nerve reflect carpal tunnel syndrome severity?

Although ultrasound measurements have been used in previous studies on carpal tunnel syndrome to visualize injury to the median nerve, whether such ultrasound data can indicate the severity of carpal tunnel syndrome remains controversial. The cross-sectional areas of the median nerve at the tunnel inlet and outlet can show swelling and compression of the nerve at the carpal. We hypothesized that the ratio of the cross-sectional areas of the median nerve at the carpal tunnel inlet to outlet accurately reflects the severity of carpal tunnel syndrome. To test this, high-resolution ultrasound with a linear array transducer at 5–17 MHz was used to assess 77 patients with carpal tunnel syndrome. The results showed that the cut-off point for the inlet-to-outlet ratio was 1.14. Significant differences in the inlet-to-outlet ratio were found among patients with mild, moderate, and severe carpal tunnel syndrome. The cut-off point in the ratio of cross-sectional areas of the median nerve was 1.29 between mild and more severe（moderate and severe） carpal tunnel syndrome patients with 64.7% sensitivity and 72.7% specificity. The cut-off point in the ratio of cross-sectional areas of the median nerve was 1.52 between the moderate and severe carpal tunnel syndrome patients with 80.0% sensitivity and 64.7% specificity. These results suggest that the inlet-to-outlet ratio reflected the severity of carpal tunnel syndrome.

Impact of climate change and human activities on the spatiotemporal dynamics of surface water area in Gansu Province, China

Understanding the dynamics of surface water area and their drivers is crucial for human survival and ecosystem stability in inland arid and semi-arid areas.This study took Gansu Province,China,a typical area with complex terrain and variable climate,as the research subject.Based on Google Earth Engine,we used Landsat data and the Open-surface Water Detection Method with Enhanced Impurity Control method to monitor the spatiotemporal dynamics of surface water area in Gansu Province from 1985 to 2022,and quantitatively analyzed the main causes of regional differences in surface water area.The findings revealed that surface water area in Gansu Province expanded by 406.88 km2 from 1985 to 2022.Seasonal surface water area exhibited significant fluctuations,while permanent surface water area showed a steady increase.Notably,terrestrial water storage exhibited a trend of first decreasing and then increasing,correlated with the dynamics of surface water area.Climate change and human activities jointly affected surface hydrological processes,with the impact of climate change being slightly higher than that of human activities.Spatially,climate change affected the'source'of surface water to a greater extent,while human activities tended to affect the'destination'of surface water.Challenges of surface water resources faced by inland arid and semi-arid areas like Gansu Province are multifaceted.Therefore,we summarized the surface hydrology patterns typical in inland arid and semi-arid areas and tailored surface water'supply-demand'balance strategies.The study not only sheds light on the dynamics of surface water area in Gansu Province,but also offers valuable insights for ecological protection and surface water resource management in inland arid and semi-arid areas facing water scarcity.

Quantifying the impact of earthquakes and geological factors on spatial heterogeneity of debris-flow prone areas:A case study in the Hengduan Mountains

Understanding the spatial heterogeneity of debris-flow-prone areas holds significant implications for regional risk management, particularly in seismically active regions with geological faults. Despite the significance of this knowledge, a comprehensive quantification of the influence of regional topographical and geological factors on the spatial heterogeneity of debris-flow-prone areas has been lacking. This study selected the Hengduan Mountains, an earthquake-prone region characterized by diverse surface conditions and complex landforms, as a representative study area. An improved units zoning and objective factors identification methodology was employed in earthquake and fault analysis to assess the impact of seismic activity and geological factors on spatial heterogeneity of debrisflow prone areas. Results showed that the application of GIS technology with hydrodynamic intensity and geographical units analysis can effectively analyze debris-flow prone areas. Meanwhile, earthquake and fault zones obviously increase the density of debrisflow prone catchments and make them unevenly distributed. The number of debris-flow prone areas shows a nonlinear variation with the gradual increase of geomorphic factor value. Specifically, the area with 1000 m-2500 m elevation difference, 25°-30° average slope, and 0.13-0.15 land use index is the most favorable conditions for debris-flow occurrence;The average annual rainfall from 600 to 1150 mm and landslides gradient from 16° to 35° are the main causal factors to trigger debris flow. Our study sheds light on the quantification of spatial heterogeneity in debris flow-prone areas in earthquake-prone regions, which can offer crucial support for post-debris flow risk management strategies.

Usefulness of the acromioclavicular joint cross-sectional area as a diagnostic image parameter of acromioclavicular osteoarthritis

BACKGROUND Acromioclavicular joint(ACJ)space narrowing has been considered to be an important diagnostic image parameter of ACJ osteoarthritis(ACJO).However,the morphology of the ACJ space is irregular because of osteophyte formation,subchondral irregularity,capsular distention,sclerosis,and erosion.Therefore,we created the ACJ cross-sectional area(ACJCSA)as a new diagnostic image parameter to assess the irregular morphologic changes of the ACJ.AIM To hypothesize that the ACJCSA is a new diagnostic image parameter for ACJO.METHODS ACJ samples were obtained from 35 patients with ACJO and 30 healthy individuals who underwent shoulder magnetic resonance(S-MR)imaging that revealed no evidence of ACJO.Oblique coronal,T2-weighted,fat-suppressed SMR images were acquired at the ACJ level from the two groups.We measured the ACJCSA and the ACJ space width(ACJSW)at the ACJ on the S-MR images using our imaging analysis program.The ACJCSA was measured as the cross-sectional area of the ACJ.The ACJSW was measured as the narrowest point between the acromion and the clavicle.RESULTS The average ACJCSA was 39.88±10.60 mm;in the normal group and 18.80±5.13 mm;in the ACJO group.The mean ACJSW was 3.51±0.58 mm in the normal group and 2.02±0.48 mm in the ACJO group.ACJO individuals had significantly lower ACJCSA and ACJSW than the healthy individuals.Receiver operating characteristic curve analyses demonstrated that the most suitable ACJCSA cutoff score was 26.14 mm^(2),with 91.4%sensitivity and 90.0%specificity.CONCLUSION The optimal ACJSW cutoff score was 2.37 mm,with 88.6%sensitivity and 96.7%specificity.Even though both the ACJCSA and ACJSW were significantly associated with ACJO,the ACJCSA was a more sensitive diagnostic image parameter.

Discussion on the application prospect of the transient electromagnetic method based on the dual launcher and mine advanced detection

The dual transmitter implements the equivalent anti-magnetic flux transient electromagnetic method, which can effectively reduce the scope of the transient electromagnetic detection blind area. However, this method is rarely reported in the detection of pipelines in urban geophysical exploration and the application of coal mines. Based on this, this paper realizes the equivalent anti-magnetic flux transient electromagnetic method based on the dual launcher. The suppression effect of this method on the blind area is analyzed by physical simulation. And the detection experiment of underground pipelines is carried out outdoors. The results show that the dual launcher can significantly reduce the turn-off time, thereby effectively reducing the impact of the blind area on the detection results, and the pipeline detection results verify the device’s effectiveness. Finally, based on the ground experimental results, the application prospect of mine advanced detection is discussed. Compared with other detection fields, the formation of blind areas is mainly caused by the equipment. If the dual launcher can be used to reduce the blind area, the accuracy of advanced detection can be improved more effectively. The above research results are of great significance for improving the detection accuracy of the underground transient electromagnetic method.

Correlation between current and cross-sectional area of parallel fixed-movable dual electrodes in ESC

Electroslag casting with parallel fixed-movable dual electrodes is a new method for achieving better quality of castings in complex mold cavities.In this work,a mathematical model,y=kx^2+(k+1)x,was established to describe the ideal correlation between the current ratio(y)and the cross-sectional area ratio(x)of the dual electrodes,where k is the filling ratio.Investigation was conducted on the electroslag casting process with dual electrodes of various cross-sectional areas,but at a constant k value.The experimental results indicated that the ideal correlation was obtained at the stable casting stage,and the fitting results were consistent with the experimental results at certain k values.The experimental findings show that better castings can be obtained when the current ratio is greater than 1.536 and the cross-sectional area ratio is greater than 0.5.

Land-Air Interaction over Arid/Semi-arid Areas in China and Its Impact on the East Asian Summer Monsoon. Part I:Calibration of the Land Surface Model (BATS)Using Multicriteria Methods

To improve the land surface simulation in the arid and semi-arid areas of northern China, the observational data from two field experiments in Dunhuang and Tongyu are used to optimize the parameters in the land surface model, BATS, through calibration with the multicriteria method. Sensitivity analysis to the parameters in Dunhuang and Tongyu indicates that different parameters need to be calibrated in two sites with different environmental and climate regimes. Comparison of observed sensible heat flux, latent heat flux, and ground surface temperature with the simulated ones shows the simulations with the optimized parameters have been substantially improved. Especially, the holistic simulations with the calibration of the parameter values are much closer to the observations in the arid region （Dunhuang）, and the energy partition with the calibrated parameters can also be simulated well in the semi-arid region （Tongyu）. Whole results demonstrate that the parameter calibration of the land surface model is important when the model is to be used to investigate the land-air interaction.

Oil／Gas Accumulation Characteristics and Exploration Methods of the Deltaic Lithologic Reservoirs in Northern Shaanxi Area

There are large deltaic systems in the Triassic Yanchang Formation in the northern Shaanxi area of the Ordos Basin, and developed two sets of good source-reservoir-caprock assemblages and many sets of oil-bearing beds. Exploration experience demonstrates that the formation and distribution of the reservoir were controlled by the generative depression of the Yanchang Formation, and deltaic reservoir sand body is the material basis for large-scale oilfields. In addition, secondary laumontite in a low permeable area was dissolved and then a high permeable area was formed. The updip lithologic variety of reservoir sand bodies is favorable to the formation of subtle lithologic traps, and the deltaic reservoirs are characterized by large multi-beds of oil-generation and abundant hydrocarbon resources. In this paper, the petroleum geologic settings of the studied area are analyzed, and the accumulation characteristics and exploration methods of lithologic reservoirs are summarized. It is of theoretical significance for the study of the exploration theories of lithologic reservoirs, and also expedites the exploration steps of deltaic reservoirs in the northern Shaanxi area.

A measurement method for distinguishing the real contact area of rough surfaces of transparent solids using improved Otsu technique

An experimental method of measuring the real contact area of transparent blocks based on the principle of total internal reflection is presented, intending to support the investigation of friction characteristics, heat conduction, and energy dissipation at the contact interface. A laser sheet illuminates the contact interface, and the transmitted laser sheet is projected onto a screen. Then the contact information is acquired from the screen by a camera. An improved Otsu method is proposed to process the data of experimental images. It can compute the threshold of the overall image and filter out all the pixels one by one. Through analyzing the experimental results, we describe the relationship between the real contact area and the positive pressure during a continuous loading process, at different loading rates, with the polymethyl methacrylate（PMMA）material. A hysteresis phenomenon in the relationship between the real contact area and the positive pressure is found and explained.

An experimental method for quantitative analysis of real contact area based on the total reflection optical principle

The simulation of real contact area between materials is foundationally important for the contact mechanics of mechanical structures. The Greenwood and Williamson(GW) model and the Majumdar(MB) model are the basic models in this field, which are widely accepted and proven to be valid in many experiments and engineering. Although the contact models have evolved considerably in recent years, the verifications of the models are most based on the indirect methods such as electrical conductivity and contact stiffness, because of the lack of effective methods to directly measure the variation of contact surface. In this paper, the total reflection(TR) method is introduced into the verification of contact models.An experiment system based on TR method is constructed to measure the real contact area of two PMMA specimens. The comparison analysis between the results of experiment and models suggests that the experiment result has the same trend with simulation, the MB model has better agreement with the experimental result because this method can take into account the variation of radius and the merging of asperities, while the GW model has a huge deviation because of the dependence on resolution and the lack of considering the variation of radius and asperity's merging process. Taking the interaction of asperities into account could give a better result that is closer to the experiment. Our results and analysis prove that the experimental methods in this paper could be used as a more direct and valid method to quantitatively measure the real contact area and to verify the contact models.

A Computer Program for Automatic Watering Based on Potential Evapotranspiration by Penman Method and Predicted Leaf Area in Miniature Pot Rose Production

In this study, we developed a computer program for automatic prediction of watering time point by considering the environmental factors such as solar radiation, air temperature and relative humidity based on the multiple linear regression equation of leaf area and Penman Method. The experiments were carried out for a year in two watering experimental plots, one of which was controlled by pF value, and the other by the computer program. After comparing the results of the two plots, the following findings were obtained. In the computer program plot, the observed and predicted values of both leaf area and evapotranspiration indicated significant correlation at the 1% level, which suggested that the computer program had high prediction accuracy. In addition, no significant difference was observed between the two experimental plots with respects to the plant height, plant diameter, leaf area, leaf number, fresh weight, and dry weight, which demonstrated that the plants in the computer program plot had normal growth. On the other hand, although the number of flower buds and flowering shoots showed higher values at the end of certain cultivations in the computer program plot than those in pF value plot, we proposed that it was due to the effect of cumulative daily solar radiation in the greenhouse, rather than the watering. Thus, we have reached the conclusion that the computer program for automatic prediction of watering time point developed by this study has high applicability in miniature pot rose production.

Monte-Carlo Method for Coalbed Methane Resource Assessment in Key Coal Mining Areas of China

Monte-Carlo method is used for estimating coalbed methane （CBM） resources in key coal mining areas of China. Monte-Carlo method is shown to be superior to the traditional volumetric method with constant parameters in the calculation of CBM resources. The focus of the article is to introduce the main algorithm and the realization of functions estimated by Monte-Carlo method, including selection of parameters, determination of distribution function, generation of pseudo-random numbers, and evaluation of the parameters corresponding to pseudo-random numbers. A specified software on the basis of Monte-Carlo method is developed using Visual C＋＋ for the assessment of the CBM resources. A case study shows that calculation results using Monte-Carlo method have smaller error range in comparison with those using volumetric method.

Synthesis and Characterization of Large Surface Area Yttrium Oxide by Precipitation Method

The method for preparing yttrium oxide with large specific surface area was introduced. By means of BET, SEM, TG and DTA analysis, the effects of precipitant, stirring velocity, non-RE impurity in solution, calcination temperature, on the surface area were studied respectively. The Y_2O_3 sample with specific surface area of more than 60 m^2·g^(-1) and L.O.I less than 1% was prepared in the suitable precipitation condition and calcinations temperature when the ammonia used as precipitant. The SEM shows that the Y_2O_3 prepared with large surface area is the aggregation of about 50 nm particles.

Discussion on applying an analytical method to optimize the anti-freeze design parameters for underground water pipelines in seasonally frozen areas

Adopting the quasi-three-dimensional （Quasi-3D） numerical method to optimize the anti-freeze design parameters of an underground pipeline usually involves heavy numerical calculations. Here, the fitting formulae between the safe con-veyance distance （SCD） of a water pipeline and six influencing factors are established based on the lowest water temper-ature （LWT） along the pipeline axis direction. With reference to the current widely used anti-freeze design approaches for underground pipelines in seasonally frozen areas, this paper first analyzes the feasibility of applying the maximum frozen penetration （MFP） instead of the mean annual ground surface temperature （MAGST） and soil water content （SWC） to calculate the SCD. The results show that the SCD depends on the buried depth if the MFP is fixed and the variation of the MAGST and SWC combination does not significantly change the SCD. A comprehensive formula for the SCD is estab-lished based on the relationships between the SCD and several primary influencing factors and the interaction among them. This formula involves five easy-to-access parameters： the MFP, buried depth, pipeline diameter, flow velocity, and inlet water temperature. A comparison between the analytical method and the numerical results based on the Quasi-3D method indicates that the two methods are in good agreement overall. The analytic method can be used to optimize the anti-freeze design parameters of underground water pipelines in seasonally frozen areas under the condition of a 1.5 safety coefficient.

Effect of Preparation Method on Surface Area and Crystalline Form of CeO_2-ZrO_2 Solid Solution

The CeO_2-ZrO_2 solid solutions were prepared by a reverse microemulsion method. The effect of preparation parameters on the surface area and crystalline form of the solid solutions were studied by the BET surface area and XRD analysis. The studies indicate that the separation of the microemulsion phase during the preparation procedure can decrease the specific surface area of sample, adding hydrogen peroxide in the matrix solution can increase the specific surface area and stability of sample. The surface area of sample calcined at 550 ℃ for 5 h is 149 m^2·g^(-1), and that calcined at 900 ℃ for 6 h is 88 m^2·g^(-1). The sample with tetragonal symmetry Ce_(0.5)Zr_(0.5)O_2 phase has a higher stability.

A Novel Method of Fabricating Flexible Transparent Conductive Large Area Graphene Film

We fabricate flexible conductive and transparent graphene films on position-emission-tomography substrates and prepare large area graphene films by graphite oxide sheets with the new technical process. The multi-layer graphene oxide sheets can be chemically reduced by HNO3 and HI to form a highly conductive graphene film on a substrate at lower temperature. The reduced graphene oxide sheets show a high conductivity sheet with resistance of 476Ω/sq and transmittance of 76% at 550nm （6 layers）. The technique used to produce the transparent conductive graphene thin film is facile, inexpensive, and can be tunable for a large area production applied for electronics or touch screens.

A CALCULATING METHOD OF THE KILL PROBABILITY ATTACK AREA FOR AAM

This paper provides a calculating method which can be used in calculation of the kill probability attack area for every AAM. At first, attack area of AAM and kill probability of every characteristic point are obtained by combining trajectory calculation with kill probability calculation. Then, coordinates of a fire point relative to standard kill probability value in terms of standardization method are found. At last, equivalent kill probability curve equations are formulated by means of curve fitting method.