Physics-based seismic analysis of ancient wood structure:fault-to-structure simulation

Based on the domain reduction method,this study employs an SEM-FEM hybrid workflow which integrates the advantages of the spectral element method(SEM)for flexible and highly efficient simulation of seismic wave propagation in a three-dimensional(3D)regional-scale geophysics model and the finite element method(FEM)for fine simulation of structural response including soil-structure interaction,and performs a physics-based simulation from initial fault rupture on an ancient wood structure.After verification of the hybrid workflow,a large-scale model of an ancient wood structure in the Beijing area,The Tower of Buddhist Incense,is established and its responses under the 1665 Tongxian earthquake and the 1730 Yiheyuan earthquake are simulated.The results from the simulated ground motion and seismic response of the wood structure under the two earthquakes demonstrate that this hybrid workflow can be employed to efficiently provide insight into the relationships between geophysical parameters and the structural response,and is of great significance toward accurate input for seismic simulation of structures under specific site and fault conditions.

Physics-constrained neural network for solving discontinuous interface K-eigenvalue problem with application to reactor physics

Machine learning-based modeling of reactor physics problems has attracted increasing interest in recent years.Despite some progress in one-dimensional problems,there is still a paucity of benchmark studies that are easy to solve using traditional numerical methods albeit still challenging using neural networks for a wide range of practical problems.We present two networks,namely the Generalized Inverse Power Method Neural Network(GIPMNN)and Physics-Constrained GIPMNN(PC-GIPIMNN)to solve K-eigenvalue problems in neutron diffusion theory.GIPMNN follows the main idea of the inverse power method and determines the lowest eigenvalue using an iterative method.The PC-GIPMNN additionally enforces conservative interface conditions for the neutron flux.Meanwhile,Deep Ritz Method(DRM)directly solves the smallest eigenvalue by minimizing the eigenvalue in Rayleigh quotient form.A comprehensive study was conducted using GIPMNN,PC-GIPMNN,and DRM to solve problems of complex spatial geometry with variant material domains from the fleld of nuclear reactor physics.The methods were compared with the standard flnite element method.The applicability and accuracy of the methods are reported and indicate that PC-GIPMNN outperforms GIPMNN and DRM.

Hydrodynamic Performance of a Newly-Designed Pelagic and Demersal Trawls Using Physical Modeling and Analytical Methods for Cameroonian Industrial Fisheries

This study proposed the newly-designed Pelagic and demersal trawls for the fishing vessels operating in Cameroonian waters in pelagic and demersal fishing grounds. The engineering performances of both trawls were investigated using physical modelling method and analytical method based on the predicted equations. In a flume tank, a series of physical model tests based on Tauti’s law were performed to investigate the hydrodynamic and geometrical performances of both trawls and to assess the applicability of the analytical methods based on predicted equations. The results showed that in model scale, the working towing speed and door spread for the pelagic trawl were 3.5 knots and 1.85 m, respectively, and for the bottom trawl net they were 4.0 knots and 1.8 m. At that speed and door spread, the drag force, net opening height, and wing-end spread of the pelagic model trawl were 36.73 N, 0.89 m, and 0.86 m, respectively, and the swept area was 0.76 m2. Bottom trawl speed and door spread were 30.43 N, 0.38 m, and 0.45 m, respectively, and the swept area was 0.25 m2. The maximum difference between the experimental and analytical results of hydrodynamic performances was less than 56.22% and 41.45%, respectively, for pelagic and bottom trawls, the results of the geometrical performances obtained using predicted equations were close to the experimental results in the flume tank with a maximum relative error less than 12.85%. The newly developed pelagic and bottom trawls had advanced engineering performance for high catch efficiency and selectivity and could be used in commercial fishing operations in Cameroonian waters.

Discussion on the application prospect of the transient electromagnetic method based on the dual launcher and mine advanced detection

The dual transmitter implements the equivalent anti-magnetic flux transient electromagnetic method, which can effectively reduce the scope of the transient electromagnetic detection blind area. However, this method is rarely reported in the detection of pipelines in urban geophysical exploration and the application of coal mines. Based on this, this paper realizes the equivalent anti-magnetic flux transient electromagnetic method based on the dual launcher. The suppression effect of this method on the blind area is analyzed by physical simulation. And the detection experiment of underground pipelines is carried out outdoors. The results show that the dual launcher can significantly reduce the turn-off time, thereby effectively reducing the impact of the blind area on the detection results, and the pipeline detection results verify the device’s effectiveness. Finally, based on the ground experimental results, the application prospect of mine advanced detection is discussed. Compared with other detection fields, the formation of blind areas is mainly caused by the equipment. If the dual launcher can be used to reduce the blind area, the accuracy of advanced detection can be improved more effectively. The above research results are of great significance for improving the detection accuracy of the underground transient electromagnetic method.

Discussion on Teaching Method of Physics in Liberal Arts College

since Physics is a basic discipline of natural science with fundamentality and prospective study, its educational significance is drawing increasing attention. This paper discusses the necessity of Physics learning in Liberal Arts College at first,and then puts forward a set of effective method of Physics teaching in Liberal Arts College through investigation and analysis of current status of Physics teaching in Liberal Arts College and based on exploration and consideration of course teaching of Physics teaching in Liberal Arts College, which can provide reference for other subjects with similar characteristics, such as Math,Chemistry, Biology and etc. in Liberal Arts College.

Numerical simulation of non-Archie electrophysical property of saturated rock with lattice Boltzmann method

The electrophysical property of saturated rocks is very important for reservoir identification and evaluation. In this paper, the lattice Boltzmann method （LBM） was used to study the electrophysical property of rock saturated with fluid because of its advantages over conventional numerical approaches in handling complex pore geometry and boundary conditions. The digital core model was constructed through the accumulation of matrix grains based on their radius distribution obtained by the measurements of core samples. The flow of electrical current through the core model saturated with oil and water was simulated on the mesoscopic scale to reveal the non-Archie relationship between resistivity index and water saturation （I-Sw）. The results from LBM simulation and laboratory measurements demonstrated that the I-Sw relation in the range of low water saturation was generally not a straight line in the log-log coordinates as described by the Archie equation. We thus developed a new equation based on numerical simulation and physical experiments. This new equation was used to fit the data from laboratory core measurements and previously published data. Determination of fluid saturation and reservoir evaluation could be significantly improved by using the new equation.

A Physical Method of Analyzing theMechanism of Continental StrongShocks from Crustal Movement

In order to analyze the mechanism of continental strong shocks from the angle of crustal movement using the data of repeated geodetic survey, this paper has proposed a physical method; it analyzes the mechanism of density change due to the occurrence of strong shocks by use of the physical quantity that reflects the time change of crustal density. (1) The general theory of the time change of density in the earth’ s interior and the theory of the time change of single layer density have been introduced, and an algorithm of stepwise iteration has been proposed; (2) The effect of the change of single layer density caused by fault dislocation has been analyzed in brief; (3) The characteristics of the time change of crustal density in the south of the seismogenic region before the 1996 Lijiang earthquake with M_L =7.0 have been studied; (4) The precursor model or causal mechanism of strong shocks possibly existing in the time change of crustal density has been investigated preliminarily.

Physical Parameter Identification Method Based on Modal Analysis for Two-axis On-road Vehicles:Theory and Simulation

Physical parameters are very important for vehicle dynamic modeling and analysis.However,most of physical parameter identification methods are assuming some physical parameters of vehicle are known,and the other unknown parameters can be identified.In order to identify physical parameters of vehicle in the case that all physical parameters are unknown,a methodology based on the State Variable Method（SVM） for physical parameter identification of two-axis on-road vehicle is presented.The modal parameters of the vehicle are identified by the SVM,furthermore,the physical parameters of the vehicle are estimated by least squares method.In numerical simulations,physical parameters of Ford Granada are chosen as parameters of vehicle model,and half-sine bump function is chosen to simulate tire stimulated by impulse excitation.The first numerical simulation shows that the present method can identify all of the physical parameters and the largest absolute value of percentage error of the identified physical parameter is 0.205%;and the effect of the errors of additional mass,structural parameter and measurement noise are discussed in the following simulations,the results shows that when signal contains 30 d B noise,the largest absolute value of percentage error of the identification is 3.78%.These simulations verify that the presented method is effective and accurate for physical parameter identification of two-axis on-road vehicles.The proposed methodology can identify all physical parameters of 7-DOF vehicle model by using free-decay responses of vehicle without need to assume some physical parameters are known.

Factors Related to Engaging in Physical Activity: A Mixed Methods Study of Female University Students

Objective: As a needs assessment for intervention, quantitative and qualitative methods were used to examine attitude, subjective norms, perceived behavioral control, intention, knowledge, and weight control status related to physical activity in female university students within the Theory of Planned Behavior (TPB). Methods: A two-phase mixed method design was used. In Phase I, 362 students participated in an online survey, and in Phase II, 33 students participated in five focus group discussions. Ages of participants ranged from 18 to 45 years old, with 18 - 25 year olds making up over 74% of the sample. Results: Attitude, subjective norms, and perceived behavioral control, along with weight control status of trying to lose weight, were found to be significant predictors of intention to follow physical activity recommendations, which in turn were the strongest predictor of physical activity. Knowledge was not found to be significant. Group discussions revealed barriers to meeting physical activity recommendations, which included lack of companionship and social support, lack of motivation, time and cost restrictions, and lack of privacy in the gym. Social norms exerted both positive and negative influences. Conclusion: The mixed method approach provided a deeper insight into the influential factors pertaining to physical activity among female students, and results could be used in further research to develop effective interventions.

Improvements of marine clay slurries using chemicale-physical combined method(CPCM)

In this paper, the effectiveness, applicability and validity of chemicalephysical combined methods（CPCMs） for treatment of marine clay （MC） slurries were evaluated. The method CPCM1 combineschemical stabilization and vacuum preloading （VP）, while CPCM2 is similar to CPCM1 but includes boththe application of surcharge and use of geo-bags to provide confinement during surcharge preloading.The key advantage of CPCM2 using geo-bags is that the surcharge can be immediately applied on thechemically stabilized slurries. Two types of geo-bags were investigated under simulated land filling anddyke conditions, respectively. The test results show that the shear strength （cu） of treated slurry byCPCM2 is generally much higher than that by CPCM1. Besides, the use of CPCM2 can significantly reducethe treatment time due to the short drainage paths created by geo-bags. Overall, CPCM2 allows fasterconsolidation and higher preloading that help to achieve higher mechanical properties of the stabilizedslurry. There are consistent relationships between cU and water content of slurries treated by CPCM2.Several important observations were also made based on comparisons of experimental data. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Effects of Varieties and Cooking Methods on Physical and Chemical Characteristics of Cooked Rice

To analyze the effect of different lowland rice varieties and different cooking methods on physical and chemical characteristics of cooked rice. A factorial randomized block design with two factors was used and each combination of the factors was repeated three times. The first factor was rice variety（Ciherang and Ciliwung） and the second factor was the cooking method（stovetop, boiling and steaming, and rice cooker）. Results showed that Ciherang and Ciliwung varieties were classified into slender grain rice type with yellowred color. The amylose content of Ciherang was classified as moderate, while the amylose content of Ciliwung classified as low. The most abundant amino acid contained in Ciherang and Ciliwung varieties was glutamic acid. Statistical analysis showed that cooking method had significant effects on texture, lightness, chroma, hue and moisture content of cooked rice. Rice cooked with liwet method had the lowest texture value, lowest lightness value, highest chroma value, and highest moisture content.

Adolescents’ perspectives on a school-based physical activity intervention:A mixed method study

Purpose'. To examine adolescent experiences and perspectives of the GoActive intervention (ISRCTN31583496) using mixed methods processevaluation to determine satisfaction with intervention components and interpret a*dolescents experiences of the intervention process in order toprovide insights for future intervention design.Methods'. Participants (n = 1542;13.2 土 0.4 years, mean 土 SD) provided questionnaire data at baseline (shyness, activity level) and post-intervention(intervention acceptability, satisfaction with components). Between-group differences (boys vs. girls and shy/inactive vs. others) weretested with linear regression models, accounting for school clustering. Data from 16 individual interviews (shy/inactive) and 11 focus groupswith 48 participants (mean = 4;range 2—7) were thematically coded. Qualitative and quantitative data were merged in an integrative mixedmethods convergence matrix, which denoted convergence and dissonance across datasets.Results'. Effect sizes for quantitative results were small and may not represent substantial between-group differences. Boys (vs. girls) preferredclass-based sessions (0 = 0.2, 95% confidence interval (CI): 0.1—0.3);qualitative data suggested that this was because boys preferred competition,which was supported quantitatively (0 = 0.2, 95%CI: 0.1-0.3). Shy/inactive students did not enjoy the competition (0 = -0.3, 95%CI:—0.5 to —0.1). Boys enjoyed trying new activities more (0 = 0.1, 95%CI: 0.1 -0.2);qualitative data indicated a desire to try new activities acrossall subgroups but identified barriers to choosing unfamiliar activities with self-imposed choice restriction leading to boredom. Qualitative datahighlighted critique of mentorship;adolescents liked the idea, but older mentors did not meet expectations.Conclusion. We interpreted adolescent perspectives of intervention components and implementation to provide insights into future complexinterventions aimed at increasing young people's physical activity in school-based settings. The intervention component mentorship was liked inprinciple, but implementation issues undesirably impacted satisfaction;competition was disliked by girls and shy/inactive students. The resultshighlight the importance of considering gender differences in preference of competition and extensive mentorship training.

STUDY OF NUMERICAL AND PHYSICAL FRACTURE WITH SPH METHOD

Two kinds of fractures can be observed in the SPH （smoothed particle hydrodynamics） simulations, which are the physical fracture and the numerical fracture. The physical one exists in reality, while the numerical one is fictitious. This paper presents the effects of both fractures and proposes a simple adding particle technique to avoid the numerical fracture. The real physical fracture is then figured out by using an applicable fracture criterion. Firstly, the effect of the numerical fracture on the computational accuracy is investigated by introducing the artificial fracture in a model of wave propagation. Secondly, a simple adding particle technique is proposed and validated by a three dimensional bending test. Finally, the experiments of penetration on the skin of aircrafts are simulated by both the initial SPH method and the improved method with the adding particle technique. The results show that the improved SPH method can describe the physical fracture very well with better accuracy.

A Sub-element Adaptive Shock Capturing Approach for Discontinuous Galerkin Methods

In this paper,a new strategy for a sub-element-based shock capturing for discontinuous Galerkin(DG)approximations is presented.The idea is to interpret a DG element as a col-lection of data and construct a hierarchy of low-to-high-order discretizations on this set of data,including a first-order finite volume scheme up to the full-order DG scheme.The dif-ferent DG discretizations are then blended according to sub-element troubled cell indicators,resulting in a final discretization that adaptively blends from low to high order within a single DG element.The goal is to retain as much high-order accuracy as possible,even in simula-tions with very strong shocks,as,e.g.,presented in the Sedov test.The framework retains the locality of the standard DG scheme and is hence well suited for a combination with adaptive mesh refinement and parallel computing.The numerical tests demonstrate the sub-element adaptive behavior of the new shock capturing approach and its high accuracy.

Effects of Different Farming Methods and Their Effects on Soil Physicochemical Properties of Guilin Maojian Tea Gardens

In order to further optimize the cultivation and agronomic technology of Guilin Maojian tea gardens, the effects, efficiencies and costs of different farming methods and their effects on the physiochemical properties of tea garden soil were studied through the modification of the test sites with the non-farming land as the control. The results showed that human farming, mini-tiller farming and crawler tractor farming could improve the physical and chemical properties of soil. After farming, the soil had good water retention but low moisture content compared to the control group, while the soil bulk density and hardness value were significantly lower than those of the control, and the porosity of soil was significantly higher than that of contrast. With the passage of time, soil bulk density and hardness value gradually increased after farming, while the porosity of soil decreased gradually. There were great differences in the effects, efficiencies and costs of different farming methods. Crawler tractor had the best and most stable farming effect, and the operation efficiency was 10 times that of human farming while the cost was only 0.39 times of human farming. Therefore, it was feasible to adopt mini-tiller or crawler tractor to carry out mechanical farming of Guilin Maojian tea garden, which provided theoretical references for the soil property improvement using mechanical farming and was favorable for promoting the popularization of farming machines and the acceleration of mechanization of tea gardens. But for tea plantations that are intended to be mechanized, apart from the mechanical and technical personnel to be configured in place, the site conditions, planting modes and mechanical way reservation of tea garden should be planned accordingly. It is recommended to select flat or gentle slope for reclamation, and preference is given to non-sexual tea tree varieties with big line spacing over 180 cm long. Moreover, the main road construction should be more than 3.0 m, and trunk road 2.0 m or above. And isolation ditch and drain should be set between the tea garden and the surrounding mountain forests and farmland.

MEASUREMENT METHOD AND PHYSICAL MODEL OF VSC CONDUCTIVITY AND ITS APPLICATIONS IN CONDUCTING POLYMERS

Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC device and its physical model as well as its applications in conducting polymers are discussed in detail.

Growth and Physical Properties of CdS/TiO_2 Bilayer by Plasma-Based Method

The titanium oxide （TiO2） nanotubes have attracted attention for their use in dye-sensitized solar cells as photoanode. In this study semiconducting cadmium sulfide （CdS） nanoparticles arc grown on top opened TiO2 nanotubes arrays by radio-frequency magnetron sputtering. X-ray diffraction, scanning electron mieroscopy, transmission electron microscopy and diffuse reflection spectra are used to study structural, morphological and optical properties of the CdS/TiO2 bilayer.

Studies of Atomic Structure and Physical Properties of Metal Clusters in MgO by HREM and Nano-probe Methods

Nanometer-sized metal clusters were prepared inside single crystalline MgO films by vacuum co-deposition of metals and MgO. The atomic structure was studied by high-resolution electron microscopy (HREM) and nm-area electron diffraction. The size of the clusters is ranging from 1 nm to 3 nm without those larger than 5 nm, and most of them have definite epitaxial orientations with the MgO matrix films. The character of the composite films is very much useful for the studies of various kinds of physical properties with anisotroPy. The physical properties such as electric transport, magnetic, optical absorption, sintering and catalytic ones were thus measured on the same samples analyzed by HREM by using high sensitivity apparatus with interest of clarifying the retationship between the atomic structure and physical properties