Measurement of remanent magnetic moment using a torsion pendulum with single frequency modulation method

In Tian Qin spaceborne gravitational-wave detectors, the stringent requirements on the magnetic cleanliness of the test masses demand the high resolution ground-based characterization measurement of their magnetic properties. Here we present a single frequency modulation method based on a torsion pendulum to measure the remanent magnetic moment mr of 1.1 kg dummy copper test mass, and the measurement result is(6.45 ± 0.04(stat) ± 0.07(syst)) × 10^(-8)A · m^(2). The measurement precision of the mr is about 0.9 n A · m^(2), well below the present measurement requirement of Tian Qin. The method is particularly useful for measuring extremely low magnetic properties of the materials for use in the construction of space-borne gravitational wave detection and other precision scientific apparatus.

Series expansion feasibility of singular integral in method of moments

When calculating electromagnetic scattering using method of moments(MoM), integral of the singular term has a significant influence on the results. This paper transforms the singular surface integral to the contour integral. The integrand is expanded to Taylor series and the integral results in a closed form. The cut-off error is analyzed to show that the series converges fast and only about 2 terms can agree well with the accurate result. The comparison of the perfect electric conductive(PEC) sphere's bi-static radar cross section(RCS) using MoM and the accurate method validates the feasibility in manipulating the singularity. The error due to the facet size and the cut-off terms of the series are analyzed in examples.

Quadrature Method of Moments for Nanoparticle Coagulation and Diffusion in the Planar Impinging Jet Flow

把大旋涡模拟与照时刻方法相结合的一个计算模特儿被雇用在一口限制侵犯的喷气学习 nanoparticle 进化。调查粒子尺寸在短暂政体被限制，并且粒子碰撞核被使用流动匹配的理论获得。模拟被把它与试验性的结果作比较验证。协调结构扮演统治粒子数字紧张的数字结果表演，尺寸和多分散性分布，和它也导致粒子沉重的喷气被冲淡由周围。在侵犯的喷气流动的粒子动力学的进化是强烈，与雷纳兹有关，数字和 nozzle-to-plate 距离，和他们的关系被分析。

The New Application of Multilevel Method of Moments in Analysis of Wire-Antenna Arrays

This paper introduces the principle of the multi-level method of moments(MoM) and its application in the analysis of the wire-antenna arrays. The multi-levelMoM broadens the usage or the iterativemethods in the MoM. Our numerical results show that when applying it to the wire-antenna array analysiswith the consideration of the mutual coupling between elements, it can allow a rapid and accurate eviluationof the current distribution on the antennas, and the computational cost is less, especially when the number orantennas is large.

Monte Carlo Integration Technique for Method of Moments Solution of EFIE in Scattering Problems

An integration technique based on use of Monte Carlo Integration is proposed for Method of Moments solution of Electric Field Integral Equation. As an example numerical analysis is carried out for the solution of the integral equation for unknown current distribution on metallic plate structures. The entire domain polynomial basis functions are employed in the MOM formulation which leads to only small number of matrix elements thus saving significant computer time and storage. It is observed that the proposed method not only provides solution of the unknown current distribution on the surface of the metallic plates but is also capable of dealing with the problem of singularity efficiently.

Computation of Protection Zone of a Lightning Rod Using Method of Moments and Monte Carlo Integration Technique

An accurate determination of lightning protection zone is an important issue in the analysis and design of an appropri-ate lightning protection system. This paper presents a fast and accurate protection zone determination methodology for metallic lightning rod. The methodology is based on Quasi Monte Carlo Integration technique applied to Method of Moments (MoM) solution of Integral Equations. As an example, solution of the integral equation for unknown charge distribution on lightning rod is obtained. The electric field in the region surrounding the rod is then computed and the protection zone plotted accordingly. The effect of the thickness of the rod on the protection zone is also studied.

A NEW MOMENT METHOD FOR THE FAST AND ACCURATE ANALYSIS OF NORMAL MODE HELICAL ANTENNAS

In this letter, a new moment method using helical segments is presented to model Normal Mode Helical Antenna (NMHA). Using this method, the NMHA can be modeled by a few segments. The current distributions and radiation patterns of some NMHAs are calculated.A comparison is made between results obtained using this helical segment algorithm and a linear segment algorithm, and the results of the two algorithms agree fairly well. When calculating the impedance matrix [Z], all the elements of the matrix can be obtained by only calculating a few elements with the application of the symmetric and periodic characteristics of the NMHA.Therefore, the CPU time and the memory storage are significantly reduced, with the accuracy and speed enhanced.

APPLICATION OF THE MOMENT METHODS TO ANALYSIS OF X-RAY DIFFRACTION LINE PROFILE FOR PA1010-BMI SYSTEM

Pure X-ray diffraction profiles have been analysed for polyamide 1010 and PA1010--BMI system by means of multipeak fitting resolution of X-ray diffraction.The methods ofvariance and fourth moment have been applied to determine the particle size and strainvalues for theparacrystalline materials.The results indicated that both variance and fourthmoment of X-ray diffraction line profile yielded approximately the same values of theparticle size and the strain.The particle sizes of(100)reflection have been found todecrease with increasing BMI content,whereas the strain values increased.

Efficient PO-MOM Method for Analysis of the Radiation Characteristics of a Large Antenna-Radome System

An efficient hybrid method based on the method of moments(MOM)and physical optics(PO)for the analysis of radiation characteristics of an electrically large antenna-radome system is presented.Specifically,MOM is first applied to the antenna to find the current on its surface,and then the equivalent PO currents produced by the antenna radiation are assumed on the radome wall.When the coupling of the PO currents and antenna current is considered,the coupling matrix is divided into a series of partial matrices,in order to deduce the memory requirement and accelerate the evaluation process.Numerical results indicate that the proposed hybrid PO-MOM method is accurate and efficient.

An Uncertainty Analysis and Reliability-Based Multidisciplinary Design Optimization Method Using Fourth-Moment Saddlepoint Approximation

In uncertainty analysis and reliability-based multidisciplinary design and optimization(RBMDO)of engineering structures,the saddlepoint approximation(SA)method can be utilized to enhance the accuracy and efficiency of reliability evaluation.However,the random variables involved in SA should be easy to handle.Additionally,the corresponding saddlepoint equation should not be complicated.Both of them limit the application of SA for engineering problems.The moment method can construct an approximate cumulative distribution function of the performance function based on the first few statistical moments.However,the traditional moment matching method is not very accurate generally.In order to take advantage of the SA method and the moment matching method to enhance the efficiency of design and optimization,a fourth-moment saddlepoint approximation(FMSA)method is introduced into RBMDO.In FMSA,the approximate cumulative generating functions are constructed based on the first four moments of the limit state function.The probability density function and cumulative distribution function are estimated based on this approximate cumulative generating function.Furthermore,the FMSA method is introduced and combined into RBMDO within the framework of sequence optimization and reliability assessment,which is based on the performance measure approach strategy.Two engineering examples are introduced to verify the effectiveness of proposed method.

Synthesis and Optimization of Almost Periodic Antennas Using Floquet Modal Analysis and MoM-GEC Method

This paper presented a new Floquet analysis used to calculate the radiation for 1-D and 2-D coupled periodic antenna systems. In this way, an accurate evaluation of mutual coupling can be proven by using a new mutual interaction expression that was based on Fourier analysis. Then, this work indicated how Floquet analysis can be used to study a finite array with uniform amplitude and linear phase distribution in both x and y directions. To modelize the proposed structures, two formulations were given in a spectral and spatial domain, where the Moment (MoM) method combined with a generalized equivalent circuit (GEC) method was applied. Radiation pattern of coupled periodic antenna was shown by varying many parameters, such as frequencies, distance and Floquet states. The 3-D radiation beam of the coupled antenna array was analyzed and compared in several steering angles θs and coupling values dx. The simulation of this structure demonstrated that directivity decreased at higher coupling values. The secondary lobs in the antenna radiation pattern affected the main lobe gain by energy dispersal and considerable increasing of side lobe level (SLL) may be achieved. Therefore, the sweeping of the radiation beam in several steering directions affected the electromagnetic performance of the antenna system: the directivity at the steering angle θs = π⁄3 was more damaged and had 19.99 dB while the second at θs = 0 had about 35.11 dB. This parametric study of coupled structure used to concept smart periodic antenna with sweeping radiation beam.

Nanoparticle Transport and Coagulation in Bends of Circular Cross Section via a New Moment Method

Transport of nanoparticles and coagulation is simulated with the combination of CFD in a circular bend. The Taylor-expansion moment method(TEMOM)is employed to study dynamics of nanoparticles with Brownian motion,based on the flow field from numerical simulation.A fully developed flow pattern in the present simulation is compared with previous numerical results for validating the model and computational code.It is found that for the simulated particulate flow system,the particle mass concentration,number concentration,particle polydispersity, mean particle diameter and geometric standard deviation over cross-section increase with time.The distribution of particle mass concentration at different time is independent of the initial particle size.More particles are concen-trated at outer edge of the bend.Coagulation plays more important role at initial stage than that in the subsequent period.The increase of Reynolds number and initial particle size leads to the increase of particle number concentration.The particle polydispersity,mean particle diameter and geometric standard deviation increase with decreasing Reynolds number and initial particle size.

An analysis of the radar backscatter from oil-covered sea surfaces using moment method and Monte-Carlo simulation: preliminary results

An analysis of the radar backscattering from the ocean surface covered by oil spill is presented using a microwave scattering model and Monte-Carlo simulation. In the analysis, a one-dimensional rough sea surface is numerically generated with an ocean waveheight spectrum for a given wind velocity. A two-layered medium is then generated by adding a thin oil layer on the simulated rough sea surface. The electric fields backscattered from the sea surface with two-layered medium are computed with the method of moments (MoM), and the backscattering coefficients are statistically obtained with N independent samples for each oil-spilled surface using the Monte-Carlo technique for various conditions of surface roughness, oil-layer thickness, frequency, polarization and incidence angle. The numerical simulation results are compared with theoretical models for clean sea surfaces and SAR images of an oil-spilled sea surface caused by the Hebei (Hebei province, China) Spirit oil tanker in 2007. Further, conditions for better oil spill extraction are sought by the numerical simulation on the effects of wind speed and oil-layer thickness at different incidence angles on the backscattering coefficients.

Simulation of the Brownian coagulation of nanoparticles with initial bimodal size distribution via moment method

The Brownian coagulation of nanoparticles with initial bimodal size distribution, i.e., mode i and j, is numerically studied using the moment method. Evolutions of particle number concentration, geometric average diameter and geometric standard deviation are given in the free molecular regime, the continuum regime, the free molecular regime and transition regime, the free molecular regime and continuum regime, respectively. The results show that, both in the free molecular regime and the continuum regime, the number concentration of mode i and j decreases with increasing time. The evolutions of particle geometric average diameter with different initial size distribution are quite different. Both intra-modal and intermodal coagulation finally make the polydispersed size distribution become monodispersed. As time goes by, the size distribution with initial bimodal turns to be unimodal and shifts to a larger particle size range. In the free molecular regime and transition regime, the intermodal coagulation becomes dominant when the number concentrations of mode i and j are of the same order. The effects of the number concentration of mode i and mode j on the evolution of geometric average diameter of mode j are negligible, while the effects of the number concentration of mode j on the evolution of geometric average diameter of mode j is distinct. In the free molecular regime and continuum regime, the higher the initial number concentration of mode j, the more obvious the variation of the number concentration of mode i.

THE CALCULATION METHOD OF FLYWHEEL MOMENT OFINERTIA OF CRANE MECHANISM

The origin and substance of the tlywheel moment calculation method of inertia mo ment of crane mechanism are set forth comprehensively and systematically in this paper, that is, the nucleus or the focus ofmoment of inertia calculation is the problem of calculating convertible tlywheelmoment. It is much better for the calculation of flywheel moment of loading move mass of lifting, traveling and rotating mechanism using the low of conservation of energy, the theorem of kinetic energyfor that of radius - changing mechanism, and the law of conservation of energy for that of all parts of gearing mechanism.

Two-Stream Approximation to the Radiative Transfer Equation:A New Improvement and Comparative Accuracy with Existing Methods

Mathematical modeling of the interaction between solar radiation and the Earth's atmosphere is formalized by the radiative transfer equation(RTE), whose resolution calls for two-stream approximations among other methods. This paper proposes a new two-stream approximation of the RTE with the development of the phase function and the intensity into a third-order series of Legendre polynomials. This new approach, which adds one more term in the expression of the intensity and the phase function, allows in the conditions of a plane parallel atmosphere a new mathematical formulation of γparameters. It is then compared to the Eddington, Hemispheric Constant, Quadrature, Combined Delta Function and Modified Eddington, and second-order approximation methods with reference to the Discrete Ordinate(Disort) method(δ –128 streams), considered as the most precise. This work also determines the conversion function of the proposed New Method using the fundamental definition of two-stream approximation(F-TSA) developed in a previous work. Notably,New Method has generally better precision compared to the second-order approximation and Hemispheric Constant methods. Compared to the Quadrature and Eddington methods, New Method shows very good precision for wide domains of the zenith angle μ 0, but tends to deviate from the Disort method with the zenith angle, especially for high values of optical thickness. In spite of this divergence in reflectance for high values of optical thickness, very strong correlation with the Disort method(R ≈ 1) was obtained for most cases of optical thickness in this study. An analysis of the Legendre polynomial series for simple functions shows that the high precision is due to the fact that the approximated functions ameliorate the accuracy when the order of approximation increases, although it has been proven that there is a limit order depending on the function from which the precision is lost. This observation indicates that increasing the order of approximation of the phase function of the RTE leads to a better precision in flux calculations. However, this approach may be limited to a certain order that has not been studied in this paper.

METHOD OF MOMENT EXCITATION IN TESTING OF STRUCTURES

The method of the moment excitation in the studies of the structure-borne sound using a moment actuator is introduced.Some design considerations for themoment actuator are presented.A standard mechanical system is established to calibratethe performance of the moment actuator.The frequency and mechanical powerperformances of the actuator are discussed.

The moment-method form of Pocklington's integral equation above ground

Pocklington’s integral equation is presented for analysis of current distributions on wire antenna above ground. Sommerfeld type integrals, the kernel functions of the integral equation, can be approximately expressed as the elementary functions using the Fresnel plane wave reflection coefficients method; and the Pocklington’s integral equation will be rearranged into a linear equation with solution easily obtained by using the method of moments, when the sinusoidal sub domain expansion is chosen to express the current distributions.