Cs/SiO_(2)催化合成MMA工艺及宏观动力学研究

采用浸渍法制备了不同Cs质量分数的Cs/SiO_(2)催化剂,并利用XRD､氮气物理吸附､CO_(2)-TPD和NH3-TPD等技术对其进行表征。在固定床反应器中,优化了Cs/SiO_(2)催化丙酸甲酯与甲醛缩合制备甲基丙烯酸甲酯(MMA)的反应条件,并初步进行了动力学分析。结果表明,Cs质量分数为10%的Cs/SiO_(2)催化剂性能最优,在反应温度为370℃､反应空速为1.2 h^(-1)､酯醛摩尔比为1∶1的优化条件下,丙酸甲酯的转化率为46.3%,MMA的选择性接近100%。动力学分析显示丙酸甲酯与甲醛缩合制备MMA的表观活化能为39.1 kJ/mol,非常接近理论值。

─NCO/─OH物质的量比对无外加溶剂聚氨酯预聚体的MMA溶液流变行为影响

无外加溶剂、自乳化丙烯酸酯改性水性聚氨酯复合乳液的绿色合成是聚氨酯(PU)工业的重要研究目标。以甲基丙烯酸甲酯(MMA)代替丙酮,会影响该预聚体溶液的流变行为,而调控其流变行为的主要方法是调控异氰酸酯基与羟基的物质的量比n。为了探究n值对其流变行为的影响,制备了不同n值PU预聚体的MMA溶液,采用旋转黏度计和流变仪进行测试。结果表明,不同n值PU预聚体的MMA溶液黏性占主导;随n值增大,PU预聚体的MMA溶液黏度下降、黏流活化能增加,剪切变稀的临界剪切速率增大,损耗模量与储能模量降低,Lissajous曲线偏离椭圆形的线性响应程度更严重。

Effect of Methyl Methacrylate– Acrylonitrile -Butadiene–Styrene (MABS) on the Mechanical and Thermal Properties of Poly (Methyl Methacrylate) (PMMA)-Fly Ash Cenospheres (FAC) Filled Composites

With the advent of plastics and the wide range of fillers that are available have made modifications as precise as the tailored resins themselves. To modify the properties of polymer either by using fillers or by preparation of polymer blends gives rise to new materials with tailored properties. More complex, three-component systems, obtained by the addition of polymeric modifier to polymer filled composites may be of interest. Use of Fly ash cenospheres is very attractive because it is inexpensive and its use can reduce the environmental pollution to a significant extent. In the present study, Poly (Methyl Methacrylate) (PMMA)-Fly ash cenospheres composites were prepared using extrusion followed by Injection molding. The effect of matrix modification with Methyl methacrylate– acrylonitrile -butadiene–styrene (MABS) on the performance of PMMA- Fly ash cenospheres compositions was also, studied. It was found that with the addition of Fly ash cenospheres particulate as filler in PMMA showed marginal reduction in Tensile Strength, % Elongation and Impact strength and improvement in Flexural Strength, Heat Deflection Temperature and Vicat Softening Point. Compared with PMMA-cenospheres composites, the notched Impact Strength of the PMMA/MABS/cenospheres composites showed marginal enhancement in values at higher loading of cenospheres. The optimum performances in mechanical and thermal properties were obtained when the ratio of MABS to cenospheres was 1:2.

COPOLYMERIZATION PROCESS OF TRIPHENYLMETHYL METHACRYLATE AND MMA WITH CHIRAL ANIONIC COMPLEX INITIATOR

The copolymerization process of triphenylmethyl methacrylate (TrMA) and methylmethacrylate (MMA) using chiral anionic complex initiator (-) SP-FlLi (Scheme 1) has beenstudied in toluene and THF, respectively. The copolymer obtained in toluene possessed muchhigher specific rotation than that in THF. These copolymers have shown a tendency to a random and a like alternating structure, respectively.

CMC-MMA-AA纳米乳液的制备及其抗蛋白质吸附性能的研究

本文以羧甲基纤维素(CMC)为乳化剂,甲基丙烯酸甲酯(MMA)和丙烯酸(AA)为单体,H_(2)O_(2)+Fe^(2+)为引发剂,采用乳液聚合技术制备了CMC-MMA-AA纳米乳液。通过SEM、DLS、TG、IR对乳胶粒的理化性质进行表征,并采用BLI、SDS-PAGE等方法验证纳米粒子的抗蛋白质吸附性能。结果表明:使用羧甲基纤维素包被后的聚甲基丙烯酸甲酯-丙烯酸纳米粒子粒径大小均一,粒径分布较窄,且具备良好的抗蛋白质吸附性能。

PMMA基凝胶聚合物电解质在石墨/LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)电池中的研究

凝胶聚合物电解质(GPE)是当前最具商业化应用前景之一的准固态电解质,可以缓解甚至解决锂离子电池存在的漏液、挥发、燃烧等潜在安全问题。本文通过高温原位固化技术制备了一种以甲基丙烯酸甲酯为单体、聚乙二醇二甲基丙烯酸酯为交联剂、双(氟磺酰)亚胺锂为导电盐、碳酸乙烯酯/碳酸甲乙酯混合溶剂为增塑剂的GPE。通过热重分析对聚甲基丙烯酸甲酯(PMMA)基GPE的热力学性质进行了表征,采用计时安培法和电子扫描显微镜研究了PMMA基GPE对Al集流体的稳定性。研究结果表明,PMMA基GPE在室温拥有较高的电导率,达到6.61 mS/cm,同时可以将碳酸酯电解液的挥发温度由100.3℃提高至138.1℃。PMMA基GPE在高电位下对Al箔显示出良好的稳定性,4.3 V vs.Li/Li+以下不会发生铝箔腐蚀,而且在商用石墨/LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)软包电池中展现出良好的循环稳定性和容量保持能力,循环1000次后容量保持率为93.4%。

LA-SA\MMA相变微胶囊的制备及其性能研究

通过原位聚合法,制备了以甲基丙烯酸甲酯为壁材,月桂酸、硬脂酸共熔物为芯材的相变微胶囊LASA\MMA相变微胶囊。利用SEM扫描电镜、差示扫描量热仪、马尔文粒径分析仪、傅里叶红外光谱分析仪和TG热重分析仪观察并检测不同芯壁比的微胶囊,结果显示:芯壁比为4:5微胶囊呈圆球状、表面光滑平整,但是略微存在团聚粘着现象。囊壁对芯材起到了一定的保护作用,有效地提高微胶囊的热稳定性。微胶囊耐久性十分优异,可以多次重复使用。然后,使用干法涂层技术把不同质量分数的相变微胶囊涂覆到SMS织物上,产生相变温控织物。通过热成像,讨论经过相变微胶囊涂层整理后的织物,其蓄热控温性能是否受到影响。结果显示:经过涂层整理后的织物,其降温速率下降变慢,能够应对外界环境温度的变化。

交联PMMA@玻尿酸微胶囊的制备及其释放性能

为成功制备玻尿酸微胶囊,在水/油(W/O)反相乳液体系中通过自由基聚合制备了以玻尿酸水溶液为芯材、季戊四醇四丙烯酸酯(PET4A)交联甲基丙烯酸甲酯(MMA)聚合物为壁材的微胶囊。采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱仪(FTIR)、激光散射粒度分布分析仪(LSPSDA)、紫外分光光度计(UV)对微胶囊的形貌、结构、粒径分布、包覆率及释放性能进行了表征。结果表明:微胶囊具有不规则球形及核壳结构形貌。当油水比为10∶1、芯壁比为1∶1、玻尿酸用量为1.5 mg/mL、交联剂添加量为0.67%(相对于壁材)时,微胶囊包覆率与载药率分别达到极大值81.40%和1.221%,表面形貌最好,其粒径在1.4~2.0μm之间。微胶囊累计释放量随交联剂用量的升高而下降,同时微胶囊具有pH响应性,pH=5.5时累计释放量最大。

DESIGN AND SYNTHESIS OF NOVEL CHIRAL IONIC LIQUIDS AND THEIR APPLICATION IN FREE RADICAL POLYMERIZATION OF METHYL METHACRYLATE

Two new chiral ionic liquids, 1 -((-)-menthoxycarbonylmethylene)-3-methylimidazolium hexafluorophosphateand 1-((-)-menthoxycarbonylmethylene)-3-hexadecylimidazolium hexafluorophosphate, were designed an d prepared. Theirchemical structures were characterized by ~1H-NMR. Reverse atom transfer radical polymerization of methyl methacrylate(MMA) in these two ionic liquids was carried out using AIBN/CuCl_2/bipy as the initiating system. The resultant well-definedpolymethyl methacrylate (PMMA) was employed as a macroinitiator to induce the atom transfer radical polymerization ofmenthyl methacrylate (MnMA) in chlorobenzene, which yielded a PMMA-b-PMnMA diblock copolymer with narrow polydispersity.

Polybutylacrylate/poly(methyl methacrylate) Core-Shell Elastic Particles as Epoxy Resin Toughener: Part I Design and Preparation

Polybutylacrylate (PBA)/poly(methyl methacrylate) (PMMA) core-shell elastic particles (CSEP), whose rubbery core diameter ranged from 0.08 μm to 1.38μm, were synthesized by using conventional emulsion polymerization, multi-step emulsion polymerization, and soapless polymerization. Allyl methacylate (ALMA) and ethylene glycol dimethacrylate (EGDMA) were selected as crosslinking reagents for core polymerization. Methacrylic acid (MAA) was used as functional co-monomer with methyl methacrylate as shell component. The content of vinyl groups in PBA rubbery core increased with the amount of crosslinking reagents. The core-shell ratio affected great on the morphology of the complex particles. Furthermore, the amounts of carboxyl on the surface of core-shell particles, copolymerized with acrylic acid, were determined by potentiometric titration. Results showed that methylacrylic acid was distributed mostly on the surface of particles.

MgO–SBA-15 Supported Pd–Pb Catalysts for Oxidative Esterification of Methacrolein with Methanol to Methyl Methacrylate

Novel Mg O–SBA-15 supported catalysts were prepared for oxidative esterification of methacrolein(MAL) with methanol to methyl methacrylate(MMA). The Mg O–SBA-15 supports were synthesized with different magnesia loadings from different magnesium precursors and hydrochloric acid molar concentrations. The Mg O–SBA-15 supports and Pd–Pb/Mg O–SBA-15 catalysts were characterized by several analysis methods. The results revealed that the addition of Mg O improved the ordered structure of SBA-15 supports and provided surface alkalinity of SBA-15 supports. The average size of the Pd3 Pb particles on magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts was smaller than that on the pure silica-based Pd–Pb/SBA-15 catalysts. The experiments on catalyst performance showed that the magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts had higher activity than pure silica-based Pd–Pb/SBA-15 catalysts, showing the strong dependence of catalytic activity on the average size of active particles. The difference of activity between Pd–Pb/SBA-15 catalysts and Pd–Pb/Mg O–SBA-15 catalysts was due to the discrepant structural properties and surface alkalinity provided by Mg O, which led to the different Pd3 Pb particle sizes and then resulted in the different number of active sites. Besides magnesia loadings, other factors, such as hydrochloric acid molar concentration and magnesium precursors, had considerable influences on the catalytic activity.

Novel ionic liquids as reaction medium for atom transfer radical polymerization of methyl methacrylate

Atom transfer radical polymerization （ATRP） of methyl methacrylate （MMA） employing ethyl 2-bromoisobutyrate （EBiB）/ CuBr as the initiating system was investigated at 50 ℃ in the absence of any additional ligand in the three room temperature ionic liquids （RTILs）, 1-methyl-imidazolium acetate （[mim][CH3COO]）, 1-methylimidazolium propionate （[mim][CH3CH2COO]） and 1-methylimidazolium butyrate （[mim][CH3CH2CH2COO]）, respectively. All the polymerization in the three RTILs proceeded in a well-controlled manner. The sequence of the apparent polymerization rate constants was kapp（[mim][CH3COO]） 〉 kapp（[mim] [CH3CH2COO]） 〉 kapp （[mim][CH3CH2CH2COO]）.

Preparation of poly （methyl methacrylate）／nanometer calcium carbonate composite by in-situ emulsion polymerization

Methyl methacrylate (MMA) emulsion polymerization in the presence of nanometer calcium carbonate(nano-CaCO3) surface modified with γ-methacryloxypropyltrimethoxysilane (MPTMS) was carried out to prepare poly (methyl methacrylate) (PMMA)/nano-CaCO3 composite. The reaction between nano-CaCO3 and MPTMS, and the grafting of PMMA onto nano-CaCO3 were confirmed by infrared spectrum. The grafting ratio and grafting efficiency of PMMA on nano-CaCO3 modified with MPTMS were much higher than that on nano-CaCO3 modified with stearic acid. The grafting ratio of PMMA increased as the weight ratio between MMA and nano-CaCO3 increased, while the grafting efficiency of PMMA decreased. Transmission electron micrograph showed that nano-CaCO3 covered with PMMA was formed by in-situ emulsion polymerization.

The Intermetallic Catalysts for Oxidative Esterification of Methacrolein to Methyl Methacrylate

A series of supported intermetallic Pb-Pb catalysts were prepared with the impregnation method by changing the support(silica,molecular sieve or γ-alumina)and the pore size.The chemical states of the two metals were characterized by XPS analysis,the process for producing methyl methacrylate based on the direct oxidative esterification of methacrolein with methanol in the presence of oxygen was performed in a slurry reactor with the above-mentioned catalysts.The influence of the calcination temperature and the kinds of support as well as the pore size on catalytic activity had been extensively investigated.Under the conditions of temperature at 80℃,catalyst 3.8%(ω)and the reaction time 2 h,the conversion rate of methacrolein reached 85%,the selectivity and the yield of methyl methacrylate were 90% and 76.5%,respectively.

Experimental Study on Malignant Transformation of Human Bronchial Epithelial Cells Induced by Glycidyl Methacrylate and Analysis on its Methylation

Objective To establish the model of human bronchial epithelial cells （16HBE） malignant transformation induced by glycidyl methacrylate （GMA） and define the different methylation genes at different stages. Methods DNA was extracted at different 16HBE malignant phases and methylation at different stages were detected using Methylation chip of Promoter Microarray Methylation＇. Methylation-specific PCR （MSP） was methylation status of some genes, and then compared with the control groups. changes of genes DNA ＇NimbleGen HG18 CpG used to observe the Results The result showed that GMA induced 16HBE morphorlogical transformation at the dose of 8 I^g/mL, and cell exposed to GMA had 1 374 genes in protophase, 825 genes in metaphase, 1 149 genes in anaphase, respectively; 30 genes are all methylation in the 3 stages; 318 genes in protophase but not in metaphase and anaphase; 272 genes in metaphase but not in protophase and anaphase; 683 genes in anaphase but not in metaphase and protophase; 73 genes in protophase and metaphase but not in anaphase; 67 genes in protophase and anaphase but not in metaphase; 59 genes in metaphase and anaphase but not in protophase. Conclusion The pattern of DNA methylation could change in the process of 16HBE induced by GMA.

AN ATOMIC FORCE MICROSCOPY STUDY ON THE AGGREGATION OF ISOTACTIC POLY(METHYL METHACRYLATE)

Aggregation process of isotactic poly（methyl methacrylate） （i-PMMA） has been studied extensively for many years, and considerable progress has been made in both experimental and theoretical studies. They are, however, seldom sustained by real-space observations of the underlying morphology. In this paper, the aggregation process of i-PMMA in concentrated acetone solutions and the fractal structure of the resulting three-dimensional clusters were characterized on the basis of real-space AFM observations of their two-dimensional projection. It was found that spherical multiple-chain particles formed upon collapse and aggregation of the involving chains as a whole during quenching the solution to room temperature. By keeping the solution at room temperature, the initially formed particles stick together upon contact to form larger particles through reassembling very slowly. The succeeding collision of the enlarged spherical particles leads to the formation of small clusters. These newly formed small clusters grow when they meet with other clusters or single Brownian particles. This leads to the formation of large clusters with fractal dimension of 1.95 ± 0.05, which suggest a reaction-limited cluster aggregation of i-PMMA in a concentrated acetone solution. This is in accordance with the conclusion obtained by light scattering measurements.

PREPARATION OF POLY(METHYL METHACRYLATE)/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly（methyl methacrylate） （LDHs/PMMA） nanocomposite was prepared by in situ solution polymerization of methyl methacrylate （MMA） in the presence of 4-vinylbenzenesulfonate intercalated LDHs（MgAl-VBS LDHs）. MgAl-VBS LDHs was prepared by the ion exchange method, and the structure and composition of the MgAl-VBS LDHs were determined by X-ray diffraction （XRD）, infrared spectroscopy and elemental analysis. XRD and transmission electron microscopy （TEM） were employed to examine the structure of LDHs/PMMA nanocomposite. It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix. The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.

Synthesis of Comblike Poly(methyl methacrylate) by Atom Transfer Radical Polymerization with Poly(ethyl 2-bromoacrylate) as Macroinitiator

Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical polymerization of ethyl 2-bromoacrylate. The obtained comblike polymers were characterized by GPC and 1H NMR.

Effect of Low-Pressure Nitrogen DC Plasma Treatment on the Surface Properties of Biaxially Oriented Polypropylene, Poly (Methyl Methacrylate) and Polyvinyl Chloride Films

In this study, commercial biaxially oriented polypropylene （BOPP）, polyvinyl chlo- ride （PVC） and poly （methyl methacrylate） （PMMA） films were treated with nitrogen plasma over different exposure times in a Pyrex tube surrounded by a DC variable magnetic field. The chemi- cal changes that appeared on the surface of the samples were investigated using Fourier transform infrared （FT4R） spectroscopy and attenuated total reflectance Fourier transform infrared （ATR- FTIR） spectroscopy after treatment for 2 min, 4 min and 6 rain in a nitrogen plasma chamber. Effects of the plasma treatment on the surface topographies and contact angles of the untreated and plasma treated films were also analyzed by atomic force microscopy （AFM） and a contact angle measuring system. The results show that the plasma treated films become more hydrophilic with an enhanced wettability due to the formation of some new polar groups on the surface of the treated films. Moreover, at higher exposure times, the total surface energy in all treated films increased while a reduction in contact angle occurred. The behavior of surface roughness in each sample was completely different at higher exposure times.

The Polymerization of Methyl Methacrylate with a New Nd(O—i-Pr)_(3)—AI(i-Bu)_(3)Catalyst System

Methyl methacrylate (MMA) was polymerized with the rare earth coordination catalyst system of Nd(O? Pr) 3 in toluene. The influences of various ligands in neodymium complexes, molar ratio of Al/Nd, catalyst concentration, catalyst aging time, solvents, the third component CCl 4, temperature and time on the polymerization of MMA were studied. The results showed that the polymerization conversion reached more than 80% at a catalyst concentration of 9 2×10 -3 mol/L. The appropriate molar ratio of CCl 4/Nd was 4. Hydrocarbon was preferred for the polymerzation to obtain a high conversion and a high M W of PMMA. The 1H NMR spectra of PMMA indicated that the lower the temperature, the higher the syndiotactic content of PMMA was obtained.