Superior gallstone dissolubility and safety of tert-amyl ethyl ether over methyl-tertiary butyl ether

BACKGROUND The use of methyl-tertiary butyl ether(MTBE)to dissolve gallstones has been limited due to concerns over its toxicity and the widespread recognition of the safety of laparoscopic cholecystectomy.The adverse effects of MTBE are largely attributed to its low boiling point,resulting in a tendency to evaporate.Therefore,if there is a material with a higher boiling point and similar or higher dissolubility than MTBE,it is expected to be an attractive alternative to MTBE.AIM To determine whether tert-amyl ethyl ether(TAEE),an MTBE analogue with a relatively higher boiling point(102°C),could be used as an alternative to MTBE in terms of gallstone dissolubility and toxicity.METHODS The in vitro dissolubility of MTBE and TAEE was determined by measuring the dry weights of human gallstones at predetermined time intervals after placing them in glass containers with either of the two solvents.The in vivo dissolubility was determined by comparing the weights of solvent-treated gallstones and control(dimethyl sulfoxide)-treated gallstones,after the direct infusion of each solvent into the gallbladder in both hamster models with cholesterol and pigmented gallstones.RESULTS The in vitro results demonstrated a 24 h TAEE-dissolubility of 76.7%,56.5%and 38.75%for cholesterol,mixed,and pigmented gallstones,respectively,which represented a 1.2-,1.4-,and 1.3-fold increase in dissolubility compared to that of MTBE.In the in vitro experiment,the 24 h-dissolubility of TAEE was 71.7%and 63.0%for cholesterol and pigmented gallstones,respectively,which represented a 1.4-and 1.9-fold increase in dissolubility compared to that of MTBE.In addition,the results of the cell viability assay and western blot analysis indicated that TAEE had a lower toxicity towards gallbladder epithelial cells than MTBE.CONCLUSION We demonstrated that TAEE has higher gallstone dissolubility properties and safety than those of MTBE.As such,TAEE could present an attractive alternative to MTBE if our findings regarding its efficacy and safety can be consistently reproduced in further subclinical and clinical studies.

Harnessing dimethyl ether and methyl formate fuels for direct electrochemical energy conversion

In this work,the oxidation of a mixture of dimethyl ether(DME) and methyl formate(MF) was studied in both an aqueous electrochemical cell and a vapor-fed polymer electrolyte membrane fuel cell(PEMFC)utilizing a multi-metallic alloy catalyst,Pt_(3)Pd_(3)Sn_(2)/C,discovered earlier by us.The current obtained during the bulk oxidation of a DME-saturated 1 M MF was higher than the summation of the currents provided by the two fuels separately,suggesting the cooperative effect of mixing these fuels.A significant increase in the anodic charge was realized during oxidative stripping of a pre-adsorbed DME+MF mixture as compared to DME or MF individually.This is ascribed to greater utilization of specific catalytic sites on account of the relatively lower adsorption energy of the dual-molecules than of the sum of the individual molecules as confirmed by the density fu nctional theory(DFT) calculations.Fuel cell polarization was also conducted using a Pt_(3)Pd_(3)Sn_(2)/C(anode) and Pt/C(cathode) catalysts-coated membrane(CCM).The enhanced surface coverage and active site utilization resulted in providing a higher peak power density by the DME+MF mixture-fed fuel cell(123 mW cm^(-2)at 0.45 V) than with DME(84mW cm^(-2)at 0.35 V) or MF(28 mW cm^(-2)at 0.2 V) at the same total anode hydrocarbon flow rate,temperature,and ambient pressure.

Preparation and shaping of solid acid SO_4^(2-)/TiO_2 and its application for esterification of propylene glycol monomethyl ether and acetic acid

The solid acid SO_4^(2-)/TiO_2 was prepared by immersion method and applied for synthesis of propylene glycol methyl ether acetate(PMA) through esterification reaction of propylene glycol monomethyl ether(PM)and acetic acid(HAc). The optimal catalyst preparation condition was determined by orthogonal analysis of parameters in a five-factor and four-level test. The obtained solid acid catalysts were characterized in detail by means of X-ray powder diffraction, thermogravimetry, pyridine adsorbed IR analysis, scanning electron microscopy, and BET surface area method. Synthesis of PMA was studied in this paper through experimental investigation of reaction conditions such as temperature, molar ratio of reactants, catalyst dosage and agitation speed. Based on its possible reaction mechanism, a pseudo-homogeneous kinetic model was established and its activation energies E_a^+ and E_a^-,65.68 × 10~3J·mol^(-1) and 57.78 × 10~3J·mol^(-1), were estimated. To prepare shaped solid acid catalyst SO_4^(2-)/TiO_2, the shaping method of impregnation–shaping–impregnation was applied. The optimal molding formulation of solid acid catalyst, obtained from the orthogonal test, was found to be binder 7 wt%, reinforcing agent 20 wt%, pore forming material 2.5 wt%, and lubricant 4 wt%.The results of performance test of catalyst demonstrated that the shaped solid acid catalyst exhibited high activity and stability.

Obovatachalcone和(±)-Obovatin Methyl Ether的全合成

以苯甲醛和2,4,6-三羟基苯乙酮一水合物为起始原料,经 C -异戊烯基化、氧化环化、碘甲烷保护羟基、羟醛缩合反应以及催化关环等步骤,以7.2%和5.7%的总收率实现了两个天然吡喃类黄酮obovatachalcone和(±)-obovatin methyl ether的全合成,其结构经^1H NMR,^13C NMR,IR和HR-MS(ESI)确证。

Catalytic Oxidation of Dimethyl Ether to Hydrocarbons over SnO_2/MgO and SnO_2/CaO Catalysts

A novel reverse microemulsion method was used to prepare SnO2/MgO and SnO2/CaO catalysts. It was found that both the catalysts were active for the reaction of catalytic oxidation of dimethyl ether （DME） in the temperature range of 275 to 300 ℃. SnO2/CaO catalyst exhibits much higher activity than SnO2/MgO. On SnO2/CaO catalyst, DME conversion of 21.8% was obtained at 300℃, while selectivities to methyl formate （MF） and dimethoxyethane （DMET） of 19.1% and 59.0% respectively were obtained at 275 ℃.

Sensitivity of green and blue-green algae to methyl tert-butyl ether

The toxicity of methyl tert-butyl ether （MTBE） to Chlorella ellipsoidea and Aphanizomenon flos-aquae was tested and assessed for a 15-d incubation with concentrations of MTBE from high （2.00×10^4 mg/L） to low （2 mg/L）. The results showed that the toxicity was low when the concentration of MTBE was in the range 1.00× 10^4-2.00× 10^4 mg/L （the greatest inhibition of growth-rate was 70%-71%, occurred during the day 1-5）. Low concentrations （2-500 rag/L） stimulated algal growth up to the greatest effect of 85%-200% when the concentration of MTBE was 50-100 mg/L during day 3-5. The toxicity of MTBE （72-120 h EC50） was 6.65×10^3-9.58×10^3 mg/L for C. ellipsoidea and that is 1.14× 10^4-2.00× 10^4 mg/L for A. floc-aquae. We found that the toxicity and ecological risk of MTBE for the algal community structure were low and the toxicity was influenced by the duration time of the test.

Aerobic degradation of methyl tert-butyl ether by a Proteobacteria strain in a closed culture system

The contamination of methyl ten-butyl ether （MTBE） in underground waters has become a widely concerned problem all over the world. In this study, a novel dosed culture system with oxygen supplied by H2O2 was introduced for MTBE aerobic biodegradation. After 7 d, almost all MTBE was degraded by a pure culture, a member of β-Proteobacteria named as PMI, in a closed system with oxygen supply, while only 40% MTBE was degraded in one without oxygen supply. Dissolved oxygen （DO） levels of the broth in closed systems respectively with and without H2O2 were about 5-6 and 4 mg/L. Higher DO may improve the activity of monooxygemase, which is the key enzyme of metabolic pathway from MTBE to tert-butyl alcohol and finally to CO2, and may result in the increase of the degrading activity of PM1 cell. The purge and trap GC-MS result of the broth in closed systems showed that tea-butyl alcohol, isopronol and acetone were the main intermediate products.

A Synthesis, Process Optimization, and Mechanism Investigation for the Formation of Polyoxymethylene Dimethyl Ethers

Polyoxymethylene dimethyl ethers(DMM_n) are promising diesel additives. The synthesis of DMM_n from methylal(DMM) and paraformaldehyde over the NKC-9 acidic ion-exchange resin catalyst was investigated. Many unrecyclable by-products such as methyl formate, dimethyl ether and formic acid were produced in the reaction. To increase the selectivity of the desired products DMM_(3-6) and reduce the amount of unrecyclable by-products, the effects of reaction temperature, time, pressure and the molar ratio of the raw materials were evaluated through a series of single factor experiments. Experiments revealed that trace amount of water could suppress the formation of unrecyclable by-products, and the optimum initial water content(less than 2 wt%) was investigated. In addition, the synthetic process needs to go through the polyoxymethylene hemiformals intermediate stage, and then the DMM_n were obtained when polyoxymethylene hemiformals reacted with methanol. Ultimately, a possible mechanism is proposed to describe the formation of DMM_n from polyoxymethylene hemiformals in detail, in which it is revealed that the formation of carbocation intermediates is important in the reaction processes.

Hydration Heat Effect of Cement Pastes Modified with Hydroxypropyl Methyl Cellulose Ether and Expanded Perlite

Hydration heat effect of cement pastes and mechanism of hydroxypropyl methyl cellulose ether （HPMC） and expanded perlite in cement pastes were studied by means of hydration exothermic rate, hydration heat amount, FTIR and TG-DTG. The results show that HPMC can significantly delay the hydration induction period and acceleration period of cement pastes. As mixing amount increased, hydration induction period of cement pastes enlarged and accelerated period gradually went back. At the same time, the amount of hydration heat gradually decreased. Expanded perlite had worse delay effects and less change of hydration heat amount of cement pastes than HPMC. HPMC changed the structure of C-S-H during cement hydration. The more amount of HPMC, the more obvious effect. However, EXP had little influence on the structure of C-S-H. At the same age, the content of Ca （OH）2 in cement pastes gradually decreased as the mixing amount increase of HPMC and expanded perlite, and had better delay effect than that single-doped with HPMC or expanded perlite when HPMC and expanded nerlite were both dooed in cement pastes.

Synthesis of dimethyl ether from methane mediated by HBr

Dimethyl ether （DME） was synthesized from methane through a two-step process, in which CH3Br was prepared from the oxidative bromination reaction of methane in the presence of HBr and oxygen over a Rh-SiO2 catalyst and then, in the second step, CH3Br was hydrolyzed to DME over a silica supported metal chloride catalyst. 12 mol%ZnCl2/SiO2 catalyst was found to be the most active, but it deactivated because of Cl- losing.

Determination of methyl tert-butyl ether(MTBE) in Chinese fuels by gas chromatography/mass spectrometry and gas chromatography/flame ionization detector

A method was developed to determine the concentration of methyl tert-butyl ether(MTBE) in gasoline, diesel and heating oil by gas chromatography(GC) with mass spectrometry(GC-MS) or flame ionization detection(FID). The diluted gasoline was directly injected into the GC, and the complete separation of MTBE from co-eluting hydrocarbons was not required. GC/MS or GC/FID method can be used to analyze MTBE in different concentration range and have good consistency.

Polysiloxane with Pendant Benzo Crown Ether via a Spacer of Undecyloxymethyl as Stationary Phase for Capillary Chromatography

ＰｏｌｙｓｉｌｏｘａｎｅｗｉｔｈＰｅｎｄａｎｔＢｅｎｚｏＣｒｏｗｎＥｔｈｅｒｖｉａａＳｐａｃｅｒｏｆＵｎｄｅｃｙｌｏｘｙｍｅｔｈｙｌａｓＳｔａｔｉｏｎａｒｙＰｈａｓｅｆｏｒＣａｐｉｌｌａｒｙＣｈｒｏｍａｔｏｇｒａｐｈｙＬＵＸｕｅ－ｒａｎ；ＺＨＡＮＧＬ...

A QSRR Study on the Relative Retention Time of Halogenated Methyl-phenyl Ethers

Halogenated methyl-phenyl ethers （anisoles） are ubiquitous organic compounds in the environment. In the present study, geometrical optimization and electrostatic potential calculations have been performed for 42 halogenated anisoles at the HF/6-31 G^＊ level. A number of statistically based parameters have been obtained. By multiple regression method, linear relationships between the gas-chromatographic relative retention time （RRT） and structural descriptors have been established for the training set of 32 halogenated anisoles. The result showed that the parameters derived from electrostatic potentials （ESPs） together with the molecular volume （Vmc） could be well used to express the quantitative structure-RRT relationships of halogenated anisoles. The best two-variable regression model gives a correlation coefficient of 0.980 and a standard deviation of 0.07, and the leave-one-out cross-validated correlation coefficient is 0.975. The goodness of the model has been further validated through exploring the predictive power for the testing set of 10 halogenated anisoles.

2D-Cell Experiment on Methyl Tert-Butyl Ether Transport in Saturated Zone of Groundwater

As an additive of gasoline,methyl tert-butyl ether(MTBE)has a higher solubility in water,which is about 20 times as high as that of benzene.This characteristic results in MTBE dissolving out of the gasoline into the soil and groundwater.Due to relative unique physicochemical behavior of MTBE it would be an ideal candidate for use in environmental forensic investigations.In order to study the transport and distribution of MTBE in saturated zone of ground water,a two-dimensional experimental cell was setup to simulate the real environment of the groundwater flow.The effects of soil and groundwater flow velocity on the MTBE transport were investigated.The results show that the mobile distance of MTBE in vertical direction was smaller than that in horizontal direction paralleling with the groundwater flow.Because the main dynamics of groundwater flow direction was convection and dispersion,the movement of MTBE is also diffusion in the vertical direction.In addition,the transport of MTBE was more quick in high permeability porous media,and the increase of groundwater flow velocity can accelerate the MTBE plume de-velopment,but the irregularity and randomness of the plume are enhanced synchronously.These research results can give some helps for the investigation of MTBE movement in the groundwater,also can make some references for other petroleum contamination behavior.

Theoretical Studies on the Kinetics and Mechanisms of Reactions for Methyl Vinyl Ether and Ozone

在甲基乙烯基醚( MVE )的二不同异构体之间的互变现象，从 MVE 的 O 3-initated 反应的主要臭氧化物的形成，在主要臭氧化物之间的转变，和随后的破碎在 BHandHLYP/6 311++G 用量化学药品方法被学习( d ， p )为优化几何学和频率计算并且在 QCISD/6 31G 的理论的水平( d ， p )为单个点精力计算的水平。率系数为温度范围被计算由使用正规转变状态理论(TST ) 的 280 440 K。为 MVE 的臭氧增加，有二不同可能性，为臭氧攻击根据二不同可能的取向讨论。尽管 synperiplanar-MVE 是比 antiperiplanar-MVE 更稳定的 7.11 kJ/mol ，理论学习的结果显示那，因为从臭氧增加 antiperiplanar-MVE 形成的主要臭氧化物是更多的马厩和相应的精力障碍转移状态， antiperiplanar-MVE 在主要臭氧化物的形成起一个更重要的作用更低。在从臭氧增加形成到 antiperiplanar-MVE 的主要臭氧化物之间的互变现象与在另外的主要臭氧化物之间的转变相比是最可存取的。主要臭氧化物的劈开主要导致 CH 2 OO，它与试验性的估计一致。为开始臭氧的反应的计算的全面的率常数是 4.8 × 1 0 −17 在 298.15 K 的厘米 3/(molecules) ，它为乙醇乙烯基醚同意试验性的价值。

Stereoselective Synthesis of (+)-△~5-Dehydrosugiyl Methyl Ether

A stereoselective synthetic route to △~5-dehydrosugiyl methyl ether was developed from (S)-(-)-α-cyclocitral, DDQ as a better oxidant for enone was used.

Total Synthesis of 16-Acetoxy-6,7-didehydroferruginyl Methyl Ether

An efficient synthetic route have been developed to 16-acetoxy-6,7-didehydroferruginyl methyl ether.

Study on Pervaporation Membranes for Removing Methanol from C_5 or Methyl Tert-butyl Ether Mixtures

Several pervaporation membranes,cellulose acetate(CA),polyvinylbutyral(PVB),poly(MMA-co-AA),MMA-AA-BA,CA/PVB blend and CA/poly(MMA-co-AA)blend,were prepared,and their pervporation proper-ties were evaluated by separation of methanol/C5 or methanol/MTBE(methyl tert-butyl ether),The results shows that the CA composite membrane has a high separation performance (flux Jmethanol=35g.m^-2.h^-1 and separa-tion factor α>400)for methanol /C5 mixtures ,and the pervaporation characteristics of MMA-AA-BA copolymer membranes changes with the ratio of copolymer,For CA/poly(MMA-co-AA) blend membrane,the pervapora-tion performance is improved in comparison with CA or poly(MMA-co-AA) membrane,From the experiment of CA/PVB blend membranes for methanol/MTBE mixture,it is found that the compatibility of blends may affect the separation features of blend membrane.

Tiny pollutant emissions of a dimethyl ether fuelled engine

Emissions of dimethyl ether(DME) fuelled engines were investigated by orthogonal experiments on a ZS195 diesel engine.The study mainly focused on the tiny pollutant emissions of formaldehyde(CH2O),methyl formate(CH3OCHO) and formic acid(HCOOH).The presence of CH2O,CH3OCHO and HCOOH are proved in the exhaust by gas chromatograph and Fourier transform infrared spectroscopy.The analysis of variance results indicate that the fuel delivery advance angle is the most important factor for CH2O emission.The fuel delivery advance angle and the interaction of injection pressure and nozzle diameter are considerable factors for unburned hydrocarbon(UHC) emission.The mechanism forming tiny pollutants,primarily through CH2O formation,is suggested to be similar to the mechanism forming UHC by DME partial oxidation existing in crevices and boundary zones,and is verified via DME combustion simulation of a multizone chemical kinetic model.