The interconversion between the two distinct isomers of methyl vinyl ether （MVE）, the formation of the primary ozonides from O3-initated reactions of MVE, the transformation between the primary ozonides, and the sub...The interconversion between the two distinct isomers of methyl vinyl ether （MVE）, the formation of the primary ozonides from O3-initated reactions of MVE, the transformation between the primary ozonides, and the subsequent fragmentation were studied using quantum chemical methods at the BHandHLYP/6311＋＋G（d,p） level of theory for optimized geometries and frequency calculations and at the QCISD/631G（d,p） level for the single point energy calculations. The rate coefficients were calculated for the temperature range 280-440 K by using the canonical transition state theory （TST）. For ozone addition to MVE, there are two different possibilities discussed on the basis of two different possible orientations for ozone attack. The results of the theoretical study indicate that although the synperiplanar-MVE is 7.11 kJ/mol more stable than the antiperiplanar-MVE, the antiperiplanar-MVE plays a more important role in formation of the primary ozonides because the primary ozonides formed from the ozone addition antiperiplanar-MVE are more stable and the energy barriers corresponding to transition states are lower. The intereonversion between the primary ozonides formed from the ozone addition to antiperiplanar-MVE is the most accessible compared with the transformations between other primary ozonides. The cleavage of the primary ozonides mainly leads to the formation of the CH2OO, which is in agreement with the experimental estimates. The calculated overall rate constant for the ozone-initiated reactions is 4.8× 10^-17 cm^3/（molecule.s） at 298.15 K, which agrees with the experimental value for ethyl vinyl ether.展开更多
A new comblike polymer host for polymer electrolyte was synthesized by reacting monomethyl ether of poly(ethylene glycol) with poly(vinyl methyl ether-alt-maleic anhydride) and endcapping the residual carboxylic acid ...A new comblike polymer host for polymer electrolyte was synthesized by reacting monomethyl ether of poly(ethylene glycol) with poly(vinyl methyl ether-alt-maleic anhydride) and endcapping the residual carboxylic acid with methanol. Butanone was selected as a solvent for the esterification in order to obtain a completely soluble product. The synthesis process was traced through by LR. Compared with the model compounds, the presumed structure of this comblike polymer has been proved to be valid by C-13 NMR The comb polymer is a white rubbery solid. It can be dissolved in butanone and THF, and manifests good film forming ability.展开更多
The phase behavior of the aqueous solution of poly(vinyl methyl ether) (PVME) sensitive to temperature and the modification of the behavior by using poly(acrylic acid) (PAA) have been studied by ultrasonic attenuation...The phase behavior of the aqueous solution of poly(vinyl methyl ether) (PVME) sensitive to temperature and the modification of the behavior by using poly(acrylic acid) (PAA) have been studied by ultrasonic attenuation measurements and fluorescence probe techniques. It has been observed that PVME solution is transparent at room temperature and becomes turbid upon heating. The solution turns clear again as soon as the temperature is decreased to room temperature. The heating and cooling process can be repeated for many times. The phase behavior of the solution sensitive to temperature is attributed to the conformational changes of the polymer. PVME may adopt an open coil conformation at room temperature. With this conformation, the polymer is well miscible with the solvent, water, and thereby the system is a real solution. The polymer may adopt a compact coil conformation when the temperature is higher than a specific value, which is called the LCST (the lower critical solution temperature) of PVME. In this case, the polymer tangles to each other and forms various aggregates, which can scatter incident light and ultrasonic waves greatly, resulting in the phase separation. Introduction of PAA decreases the temperature sen-sitivity of the phase behavior of the polymer. The nature of the inhibition is attributed to the complexation of PAA with PVME and the strong hydrophilicity of PAA. Results from fluorescence probe studies are in accordance with those from ultrasonic attenuation measurements, indicating again that the ultrasonic attenuation method can be suc-cessfully used for the qualitative studies of polymer conformations and complexation between polymers.展开更多
Atomistic detailed hydration structures of poly(vinyl methyl ether)(PVME) have been investigated by molecular dynamics simulations under 300 K at various concentrations. Both radial distribution functions and the dist...Atomistic detailed hydration structures of poly(vinyl methyl ether)(PVME) have been investigated by molecular dynamics simulations under 300 K at various concentrations. Both radial distribution functions and the distance distributions between donors and acceptors in hydrogen bonds show that the hydrogen bonds between the polymer and water are shorter by 0.005 nm than those between water molecules. The Quasi-hydrogen bonds take only 7.2% of the van der Waals interaction pairs. It was found the hydrogen bonds are not evenly distributed along the polymer chain,and there still exists a significant amount(10%) of ether oxygen atoms that are not hydrogen bonded to water at a concentration as low as 3.3%. This shows that in polymer solutions close contacts occur not only between polymer chains but also between chain segments within the polymer,which leads to inefficient contacts between ether oxygen atoms and water molecules. Variation of the quasi-hydrogen bonds with the concentration is similar to that of hydrogen bonds,but the ratio of the repeat units forming quasi-hydrogen bonds to those forming hydrogen bonds approaches 0.2. A transition was found in the demixing enthalpy at around 30% measured by dynamic testing differential scanning calorimetry(DTDSC) for aqueous solutions of a mono-dispersed low molecular weight PVME,which can be related to the transition of the fractions of hydrogen bonds and quasi-hydrogen bonds at ～27%. The transition of the fractions of hydrogen bonds and quasi-hydrogen bonds at ～27% can be used to explain the demixing enthalpy transition at 30% at a molecular scale. In addition,at the concentration of 86%,each ether oxygen atom bonded with water is assigned 1.56 water molecules on average,and 'free' water molecules emerge at the concentration of around 54%.展开更多
文摘The interconversion between the two distinct isomers of methyl vinyl ether （MVE）, the formation of the primary ozonides from O3-initated reactions of MVE, the transformation between the primary ozonides, and the subsequent fragmentation were studied using quantum chemical methods at the BHandHLYP/6311＋＋G（d,p） level of theory for optimized geometries and frequency calculations and at the QCISD/631G（d,p） level for the single point energy calculations. The rate coefficients were calculated for the temperature range 280-440 K by using the canonical transition state theory （TST）. For ozone addition to MVE, there are two different possibilities discussed on the basis of two different possible orientations for ozone attack. The results of the theoretical study indicate that although the synperiplanar-MVE is 7.11 kJ/mol more stable than the antiperiplanar-MVE, the antiperiplanar-MVE plays a more important role in formation of the primary ozonides because the primary ozonides formed from the ozone addition antiperiplanar-MVE are more stable and the energy barriers corresponding to transition states are lower. The intereonversion between the primary ozonides formed from the ozone addition to antiperiplanar-MVE is the most accessible compared with the transformations between other primary ozonides. The cleavage of the primary ozonides mainly leads to the formation of the CH2OO, which is in agreement with the experimental estimates. The calculated overall rate constant for the ozone-initiated reactions is 4.8× 10^-17 cm^3/（molecule.s） at 298.15 K, which agrees with the experimental value for ethyl vinyl ether.
文摘A new comblike polymer host for polymer electrolyte was synthesized by reacting monomethyl ether of poly(ethylene glycol) with poly(vinyl methyl ether-alt-maleic anhydride) and endcapping the residual carboxylic acid with methanol. Butanone was selected as a solvent for the esterification in order to obtain a completely soluble product. The synthesis process was traced through by LR. Compared with the model compounds, the presumed structure of this comblike polymer has been proved to be valid by C-13 NMR The comb polymer is a white rubbery solid. It can be dissolved in butanone and THF, and manifests good film forming ability.
基金the National Natural Science Foundation of China (No. 20173035), the Ministry of Education (No. 03148), and the Natura
文摘The phase behavior of the aqueous solution of poly(vinyl methyl ether) (PVME) sensitive to temperature and the modification of the behavior by using poly(acrylic acid) (PAA) have been studied by ultrasonic attenuation measurements and fluorescence probe techniques. It has been observed that PVME solution is transparent at room temperature and becomes turbid upon heating. The solution turns clear again as soon as the temperature is decreased to room temperature. The heating and cooling process can be repeated for many times. The phase behavior of the solution sensitive to temperature is attributed to the conformational changes of the polymer. PVME may adopt an open coil conformation at room temperature. With this conformation, the polymer is well miscible with the solvent, water, and thereby the system is a real solution. The polymer may adopt a compact coil conformation when the temperature is higher than a specific value, which is called the LCST (the lower critical solution temperature) of PVME. In this case, the polymer tangles to each other and forms various aggregates, which can scatter incident light and ultrasonic waves greatly, resulting in the phase separation. Introduction of PAA decreases the temperature sen-sitivity of the phase behavior of the polymer. The nature of the inhibition is attributed to the complexation of PAA with PVME and the strong hydrophilicity of PAA. Results from fluorescence probe studies are in accordance with those from ultrasonic attenuation measurements, indicating again that the ultrasonic attenuation method can be suc-cessfully used for the qualitative studies of polymer conformations and complexation between polymers.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 20474073, 20490220, 20674090 and 90612015)National Major Basic Research Project (Grant No. G1999064800)
文摘Atomistic detailed hydration structures of poly(vinyl methyl ether)(PVME) have been investigated by molecular dynamics simulations under 300 K at various concentrations. Both radial distribution functions and the distance distributions between donors and acceptors in hydrogen bonds show that the hydrogen bonds between the polymer and water are shorter by 0.005 nm than those between water molecules. The Quasi-hydrogen bonds take only 7.2% of the van der Waals interaction pairs. It was found the hydrogen bonds are not evenly distributed along the polymer chain,and there still exists a significant amount(10%) of ether oxygen atoms that are not hydrogen bonded to water at a concentration as low as 3.3%. This shows that in polymer solutions close contacts occur not only between polymer chains but also between chain segments within the polymer,which leads to inefficient contacts between ether oxygen atoms and water molecules. Variation of the quasi-hydrogen bonds with the concentration is similar to that of hydrogen bonds,but the ratio of the repeat units forming quasi-hydrogen bonds to those forming hydrogen bonds approaches 0.2. A transition was found in the demixing enthalpy at around 30% measured by dynamic testing differential scanning calorimetry(DTDSC) for aqueous solutions of a mono-dispersed low molecular weight PVME,which can be related to the transition of the fractions of hydrogen bonds and quasi-hydrogen bonds at ～27%. The transition of the fractions of hydrogen bonds and quasi-hydrogen bonds at ～27% can be used to explain the demixing enthalpy transition at 30% at a molecular scale. In addition,at the concentration of 86%,each ether oxygen atom bonded with water is assigned 1.56 water molecules on average,and 'free' water molecules emerge at the concentration of around 54%.
