Parallel Neural Network-Based Motion Controller for Autonomous Underwater Vehicles

A parallel neural network-based controller （PNNC） is presented for the motion control of underwater vehicles in this paper. It consists of a real-time part, a self-learning part and a desired-state programmer, and it is different from normal adaptive neural network controller in structure. Owing to the introduction of the self-learning part, on-line learning can be performed without sample data in several sample periods, resulting in high learning speed of the controller and good control performance. The desired-state programmer is utilized to obtain better learning samples of the neural network to keep the stability of the controller. The developed controller is applied to the 4-degree of freedom control of the AUV “IUV- IV” and is successful on the simulation platform. The control performance is also compared with that of neural network controller with different structures such as normal adaptive neural network and different learning methods. Current effects and surge velocity control are also included to demonstrate the controller＇ s performance. It is shown that the PNNC has a great possibility to solve the problems in the control system design of underwater vehicles.

Tracking Control of Autonomous Underwater Vehicles with Internal Moving Mass

追踪轨道的控制问题被调查为一自治在水下作为致动器用一个内部点团和一个后面的推进器搬到垂直飞机的车辆(AUV ) 。与点团的动力学结合了， AUV 作为一个 underactuated 系统被建模。一个基于 Lyapunov 的追踪控制器被使用 backstepping 途径稳定错误动力学并且强迫位置错误到起源的一位小邻居建议。模拟结果验证建议追踪的途径。

Analysis and innovation of key technologies for autonomous underwater vehicles

As the mission needs of the autonomous underwater vehicles(AUV) have become increasingly varied and complex,the AUVs are developing in the direction of systematism, multifunction, and clustering technology, which promotes the progress of key technologies and proposes a series of technical problems. Therefore, it is necessary to make systemic analysis and in-depth study for the progress of AUV's key technologies and innovative applications. The multi-functional mission needs and its key technologies involved in complex sea conditions are pointed out through analyzing the domestic and foreign technical programs, functional characteristics and future development plans. Furthermore, the overall design of a multi-moving state AUV is proposed. Then, technical innovations of the key technologies, such as thrust vector, propeller design, kinematics and dynamics, navigation control, and ambient flow field characteristics, are made, combining with the structural characteristics and motion characteristics of the new multi-moving state AUV. The results verify the good performance of the multi-moving state AUV and provide a theoretical guidance and technical support for the design of new AUV in real complex sea conditions.

Numerical computation and analysis of high-speed autonomous underwater vehicle (AUV) moving in head sea based on dynamic mesh

Autonomous underwater vehicles （AUVs） navigating on the sea surface are usually required to complete the communication tasks in complex sea conditions. The movement forms and flow field characteristics of a multi-moving state AUV navigating in head sea at high speed were studied. The mathematical model on longitudinal motion of the high-speed AUV in head sea was established with considering the hydrodynamic lift based on strip theory, which was solved to get the heave and pitch of the AUV by Gaussian elimination method. Based on this, computational fluid dynamics （CFD） method was used to establish the mathematical model of the unsteady viscous flow around the AUV with considering free surface effort by using the Reynolds-averaged Navier-Stokes （RANS） equations, shear-stress transport （SST） k-w model and volume of fluid （VOF） model. The three-dimensional numerical wave in the computational field was realized through defining the unsteady inlet boundary condition. The motion forms of the AUV navigating in head sea at high speed were carried out by the program source code of user-defined function （UDF） based on dynamic mesh. The hydrodynamic parameters of the AUV such as drag, lift, pitch torque, velocity, pressure and wave profile were got, which reflect well the real ambient flow field of the AUV navigating in head sea at high speed. The computational wave profile agrees well with the experimental phenomenon of a wave-piercing surface vehicle. The force law of the AUV under the impacts of waves was analyzed qualitatively and quantitatively, which provides an effective theoretical guidance and technical support for the dynamics research and shape design of the AUV in real complex environnaent.

Dynamics Modeling and Simulation of Autonomous Underwater Vehicles with Appendages

To provide a simulation system platform for designing and debugging a small autonomous underwater vehicle＇s （AUV） motion controller, a six-degree of freedom （6-DOF） dynamic model for AUV controlled by thruster and fins with appendages is examined. Based on the dynamic model, a simulation system for the AUV＇s motion is established. The different kinds of typical motions are simulated to analyze the motion performance and the maneuverability of the AUV. In order to evaluate the influences of appendages on the motion performance of the AUV, simulations of the AUV with and without appendages are performed and compared. The results demonstrate the AUV has good maneuverability with and without appendages.

L^(*)—An index for evaluating long range performance of autonomous underwater vehicles(AUVs)

Autonomous underwater vehicles(AUVs)have various applications in both military and civilian fields.A wider operation area and more complex tasks require better overall range performance of AUVs.However,until recently,there have been few unified criteria for evaluating the range performance of AUVs.In the present work,a unified range index,i.e.,L^(*),considering the cruising speed,the sailing distance,and the volume of an AUV,is proposed for the first time,which can overcome the shortcomings of previous criteria using merely one single parameter,and provide a uniform criterion for the overall range performance of various AUVs.After constructing the expression of the L^(*)index,the relevant data of 49 AUVs from 12 countries worldwide have been collected,and the characteristics of the L^(*)range index in different countries and different categories were compared and discussed.Furthermore,by analyzing the complex factors affecting the range index,methods to enhance the L^(*)range index value,such as efficiency enhancement and drag reduction,have been introduced and discussed.Under this condition,the work proposes a unified and scientific criterion for evaluating the range performance of AUVs for the first time,provides valuable theoretical insight for the development of AUVs with higher performance,and then arouses more attention to the application of the cutting-edge superlubricity technology to the field of underwater vehicles,which might greatly help to accelerate the coming of the era of the superlubricitive engineering.

Adaptive Backstepping Terminal Sliding Mode Control Method Based on Recurrent Neural Networks for Autonomous Underwater Vehicle

The trajectory tracking control problem is addressed for autonomous underwater vehicle(AUV) in marine environ?ment, with presence of the influence of the uncertain factors including ocean current disturbance, dynamic modeling uncertainty, and thrust model errors. To improve the trajectory tracking accuracy of AUV, an adaptive backstepping terminal sliding mode control based on recurrent neural networks(RNN) is proposed. Firstly, considering the inaccu?rate of thrust model of thruster, a Taylor’s polynomial is used to obtain the thrust model errors. And then, the dynamic modeling uncertainty and thrust model errors are combined into the system model uncertainty(SMU) of AUV; through the RNN, the SMU and ocean current disturbance are classified, approximated online. Finally, the weights of RNN and other control parameters are adjusted online based on the backstepping terminal sliding mode controller. In addition, a chattering?reduction method is proposed based on sigmoid function. In chattering?reduction method, the sigmoid function is used to realize the continuity of the sliding mode switching function, and the sliding mode switching gain is adjusted online based on the exponential form of the sliding mode function. Based on the Lyapu?nov theory and Barbalat’s lemma, it is theoretically proved that the AUV trajectory tracking error can quickly converge to zero in the finite time. This research proposes a trajectory tracking control method of AUV, which can e ectively achieve high?precision trajectory tracking control of AUV under the influence of the uncertain factors. The feasibility and e ectiveness of the proposed method is demonstrated with trajectory tracking simulations and pool?experi?ments of AUV.

Bio-inspired geomagnetic navigation method for autonomous underwater vehicle

This paper presents a bio-inspired geomagnetic navigation method for autonomous underwater vehicle(AUV) without using any a priori geomagnetic information. Firstly, the multi-objective search problem is raised. Secondly, the geomagnetic navigation model is established by constructing a cost function. Then, by taking into consideration the biological magneto-taxis movement behavior for the geomagnetic environment stimulus, the multiobjective evolutionary search algorithm is derived to describe the search process. Finally, compared to the state-of-the-art, the proposed method presents better robustness. The simulation results demonstrate the reliability and feasibility of the proposed method.

Nonlinear trajectory tracking control of a new autonomous underwater vehicle in complex sea conditions

Autonomous underwater vehicles (AUVs) navigating in complex sea conditions usually require a strong control system to keep the fastness and stability. The nonlinear trajectory tracking control system of a new AUV in complex sea conditions was presented. According to the theory of submarines,the six-DOF kinematic and dynamic models were decomposed into two mutually non-coupled vertical and horizontal plane subsystems. Then,different sliding mode control algorithms were used to study the trajectory tracking control. Because the yaw angle and yaw angle rate rather than the displacement of the new AUV can be measured directly on the horizontal plane,the sliding mode control algorithm combining cross track error method and line of sight method was used to fulfill its high-precision trajectory tracking control in the complex sea conditions. As the vertical displacement of the new AUV can be measured,in order to achieve the tracking of time-varying depth signal,a stable sliding mode controller was designed based on the single-input multi-state system,which took into account the characteristic of the hydroplane and the amplitude and rate constraints of the hydroplane angle. Moreover,the application of dynamic boundary layer can improve the robustness and control accuracy of the system. The computational results show that the designed sliding mode control systems of the horizontal and vertical planes can ensure the trajectory tracking performance and accuracy of the new AUV in complex sea conditions. The impacts of currents and waves on the sliding mode controller of the new AUV were analyzed qualitatively and quantitatively by comparing the trajectory tracking performance of the new AUV in different sea conditions,which provides an effective theoretical guidance and technical support for the control system design of the new AUV in real complex environment.

Adaptive PID control system for an autonomous underwater vehicle

The control system of an autonomous underwater vehicle （AUV） is introduced. According to control requirements of the AUV, a simple but practical adaptive PID control method is designed The semi-physical simulation is done to test the feasibility of the control system. The neural network idea and the structure of PID controller are referred to design the adaptive PID controller. An intelligent integral is introduced to improve control precision. Compaed with traditional PID con- trollers, the adaptive PID controller has simple structure, good online adjusting ability, fast convergence and good robustness. The simulation experiments also show that the adaptive PID control system has high precision and fine antijamming ability.

Stability Analysis on Speed Control System of Autonomous Underwater Vehicle

The stability of the motion control system is one of the decisive factors of the control quality for Autonomous Underwater Vehicle（AUV）.The divergence of control,which the unstable system may be brought about,is fatal to the operation of AUV.The stability analysis of the PD and S-surface speed controllers based on the Lyapunov＇s direct method is proposed in this paper.After decoupling the six degree-of-freedom（DOF）motions of the AUV,the axial dynamic behavior is discussed and the condition is deduced,in which the parameters selection within stability domain can guarantee the system asymptotically stable.The experimental results in a tank and on the sea have successfully verified the algorithm reliability,which can be served as a good reference for analyzing other AUV nonlinear control systems.

Reinforcement learning based parameter optimization of active disturbance rejection control for autonomous underwater vehicle

This paper proposes a liner active disturbance rejection control(LADRC) method based on the Q-Learning algorithm of reinforcement learning(RL) to control the six-degree-of-freedom motion of an autonomous underwater vehicle(AUV).The number of controllers is increased to realize AUV motion decoupling.At the same time, in order to avoid the oversize of the algorithm, combined with the controlled content, a simplified Q-learning algorithm is constructed to realize the parameter adaptation of the LADRC controller.Finally, through the simulation experiment of the controller with fixed parameters and the controller based on the Q-learning algorithm, the rationality of the simplified algorithm, the effectiveness of parameter adaptation, and the unique advantages of the LADRC controller are verified.

Development of A Three-Dimensional Guidance System for Long-Range Maneuvering of A Miniature Autonomous Underwater Vehicle

The present paper introduces a three-dimensional guidance system developed for a miniature Autonomous Underwater Vehicle（AUV）. The guidance system determines the best trajectory for the vehicle based on target behavior and vehicle capabilities. The dynamic model of this novel AUV is derived based on its special characteristics such as the horizontal posture and the independent diving mechanism. To design the guidance strategy, the main idea is to select the desired depth, presumed proportional to the horizontal distance of the AUV and the target. By connecting the two with a straight line, this strategy helps the AUV move in a trajectory sufficiently close to this line. The adjacency of the trajectory to the line leads to reasonably short travelling distances and avoids unsafe areas. Autopilots are designed using sliding mode controller. Two different engagement geometries are considered to evaluate the strategy＇s performance： stationary target and moving target. The simulation results show that the strategy can provide sufficiently fast and smooth trajectories in both target situations.

Using Unmanned Underwater Vehicles as Research Platforms in Coastal Ocean Studies

The advantages of using unmanned underwater vehicles in coastal ocean studies are emphasized. Two types of representative vehicles, remotely operated vehicle (ROV) and autonomous underwater vehicle (AUV) from University of South Florida, are discussed. Two individual modular sensor packages designed and tested for these platforms and field measurement results are also presented. The bottom classification and albedo package, BCAP, provides fast and accurate estimates of bottom albedos, along with other parameters such as in-water remote sensing reflectance. The real-time ocean bottom optical topographer, ROBOT, reveals high-resolution 3-dimentional bottom topography for target identification. Field data and results from recent Coastal Benthic Optical Properties field campaign, 1999 and 2000, are presented. Advantages and limitations of these vehicles and applications of modular sensor packages are compared and discussed.

基于COMGRU的AUV航路轨迹预测方法

针对采用神经网络预测自主水下机器人航迹存在滞后性的问题,本文提出一种基于信息压缩的改进门控循环神经网络,用于水下自主机器人航路多步轨迹预测。该算法将水下自主机器人航行轨迹附近的障碍物位置信息、海流信息以及时空轨迹信息共同构成的地理位置信息进行数据压缩处理,作为本文预测网络的输入,以提高网络训练效率。实验验证该算法减少了水下自主机器人航迹多步预测的滞后性且具有较高的准确率。

面向海底管道巡检的AUV三维自适应路径跟踪

针对面向海底管道巡检任务的欠驱动自主水下航行器(AUV)三维路径跟踪控制问题进行研究。首先,在固定坐标系和机体坐标系下建立AUV的运动学模型,为设计适宜运动控制的三维路径跟踪控制器,建立流体坐标系,并在Serret-Frenet坐标系下建立AUV的路径跟踪误差模型;其次,将可变前视距离引入传统视线(LOS)制导策略,提出一种自适应LOS制导策略以提高制导精度,并基于此设计面向海底管道巡检的AUV三维路径跟踪控制器,使得AUV可有效跟踪设定的参数化路径;最后,基于李雅普诺夫稳定性理论证明了闭环系统的稳定性。仿真结果验证了所提面向海底管道巡检的三维路径跟踪控制器的有效性。研究成果能够改善AUV的操纵性,可为面向海底管道巡检的无人水下航行器路径跟踪控制方法提供参考。

一种绳驱动AUV布放回收装置的结构设计与动力学分析

为了提高自主式水下航行器(AUV)布放回收的安全性和效率,以船舶起重机为基础,设计一种不仅能通过绳索自主调整吊笼的姿态,而且具有良好减摇效果的AUV水面布放回收装置。分析该装置的结构特性和机械理论模型,采用坐标转换法对吊笼的运动学位置、速度和加速度进行分析,并通过MATLAB软件对其进行仿真验证。在运动学模型的基础上对装置进行动力学分析,并利用ADAMS搭建绳索系统的虚拟样机并进行无激励和存在激励仿真验证。研究结果表明:在受船舶激励的情况下,横摇的减摇效果为78%,纵摇的减摇效果为75%;在给定轨迹下,4根绳索的变化比较稳定,能通过绳索调整吊笼的姿态,进而安全高效地完成AUV布放回收工作。

AUV接驳系统水下系泊悬浮运动建模与分析

水下对接是自主水下航行器(AUV)能量补充和数据交换的关键技术,为提升对接成功率,针对拖曳式导向罩对接方法进行改进,设计了一种新型开合式接驳装置。分析该装置是否满足对接要求,本文基于机构质心位移分析和Newton-Euler动力学理论建立具有变质心特性的接驳装置水下六自由度运动模型,系绳简化为一变刚度——阻尼轻质弹簧模型,结合系绳运动和受力边界条件建立系统缆-体耦合运动模型;并使用CFD软件STARCCM+对系泊悬浮接驳系统建立动态仿真模型。通过拖曳实验验证2种方法的有效性,其中仿真结果与实验数据的相关性更好,相关性系数最高时可达0.936 7。最后利用动态仿真模型详细分析外界水流和波浪干扰以及接驳装置拖点变化、导向罩开合对接驳装置运动状态的影响,波浪幅值不宜超过0.2 m,拖曳架固定时接驳装置更有利,导向罩开合时对接驳装置的姿态角影响较小,对其位置的变化影响较大。

AUV终端对接的单目视觉导引方法研究

在水下复杂环境中高效回收自主潜水器(AUV)是一项重大的技术挑战。本文提出了一种利用单目视觉检测和跟踪对接站上光环标识进行终端对接的方法。为了提高光源特征识别,本文改进了Canny边缘检测算法,采用自适应阈值方法动态调整光源轮廓,并在阈值最优时采用最小外接圆方法确定光源中心。此外,利用几何位置和面积约束消除水面反射的干扰。在视觉定位和跟踪方面,采用张氏标定法获取相机的内部参数和畸变参数,通过比较光环中心和图像中心来估计AUV的航向和俯仰偏差,然后利用位置-姿态PID控制器进行快速跟踪。水池实验结果表明,该方法简单实用,鲁棒性强,能够为未来水下机器人的可靠回收提供一定技术参考。