Most of the existing screw drive in-pipe robots cannot actively adjust the maximum traction capacity, which limits the adaptability to the wide range of variable environment resistance, especially in curved pipes. In ...Most of the existing screw drive in-pipe robots cannot actively adjust the maximum traction capacity, which limits the adaptability to the wide range of variable environment resistance, especially in curved pipes. In order to solve this problem, a screw drive in-pipe robot based on adaptive linkage mechanism is proposed. The differential property of the adaptive linkage mechanism allows the robot to move without motion interference in the straight and varied curved pipes by adjusting inclining angles of rollers self-adaptively. The maximum traction capacity of the robot can be changed by actively adjusting the inclining angles of rollers. In order to improve the adaptability to the variable resistance, a torque control method based on the fuzzy controller is proposed. For the variable environment resistance, the proposed control method can not only ensure enough traction force, but also limit the output torque in a feasible region. In the simulations, the robot with the proposed control method is compared to the robot with fixed inclining angles of rollers. The results show that the combination of the torque control method and the proposed robot achieves the better adaptability to the variable resistance in the straight and curved pipes.展开更多
A new method to drive and control micro in-pipe robot by means of magneticfield outside pipe is put forward, in which wireless micro robot can move forward driven by thevibration of its legs through converting magneti...A new method to drive and control micro in-pipe robot by means of magneticfield outside pipe is put forward, in which wireless micro robot can move forward driven by thevibration of its legs through converting magnetic energy into mechanical one under the action ofpiezomagnetism and magnetomechanical coupling of its micro GMA, when time varied oscillatingmagnetic field with different frequency applied outside pipe. Firstly its systematical structure andoperation principle are introduced, and energy converting process from outside magnetic one intomechanical one is analyzed through setting up the magnetic and mechanical dynamic model of GMA andestablishing dynamic model of two stage amplifier of mobile earner. Robot systematical experimentsshow the correctness of the theoretical analysis and its feasibility. As a result, drive and controlmethod without cable through outside magnetic field is realized.展开更多
Performance of giant magnetostrictive material (GMM) is introduced. Principleof work, basic structure and key techniques of giant magnetostrictive actuator (GMA) are analyzed.Its dynamic models of magneto-mechanical c...Performance of giant magnetostrictive material (GMM) is introduced. Principleof work, basic structure and key techniques of giant magnetostrictive actuator (GMA) are analyzed.Its dynamic models of magneto-mechanical coupling are established. The structure and principle ofthe pneumatic servo valve and the micro pipe robot with new homemade GMM are presented. Theexperiment is carried out under typical working conditions. The experiment results show that the GMMpneumatic servo valve has wide pressure control characteristics, good linearity, and fast responsespeed. The movement principles of the GMM robot system are reliably feasible and its maximal movingspeed is about 8 mm/s. It is preferable to the driving frequency of the robot within 100 approx 300Hz.展开更多
This paper develops a fast filtering algorithm based on vibration systems theory and neural information exchange approach. The characters, including the derivation process and parameter analysis, are discussed and the...This paper develops a fast filtering algorithm based on vibration systems theory and neural information exchange approach. The characters, including the derivation process and parameter analysis, are discussed and the feasibility and the effectiveness are testified by the filtering performance compared with various filtering methods, such as the fast wavelet transform algorithm, the particle filtering method and our previously developed single degree of freedom vibration system filtering algorithm, according to simulation and practical approaches. Meanwhile, the comparisons indicate that a significant advantage of the proposed fast filtering algorithm is its extremely fast filtering speed with good filtering perfi^rmance. Further, the developed fast filtering algorithm is applied to the navigation and positioning system of the micro motion robot, which is a high real-time requirement for the signals preprocessing. Then, the preprocessing data is used to estimate the heading angle error and the attitude angle error of the micro motion robot. The estimation experiments illustrate the high practicality of the proposed fast filtering algorithm.展开更多
This paper proposes an anchoring and extending micro intestinal robot for medical inspection and surgery propose. The three-leg anchoring method is discussed in detail, and micro robot phantom model is used to test an...This paper proposes an anchoring and extending micro intestinal robot for medical inspection and surgery propose. The three-leg anchoring method is discussed in detail, and micro robot phantom model is used to test anchoring related parameters for mechanical design. A prototype is designed and fabricated base on the experiment results and is tested in in-vitro experiment. The prototype is locomotive in a pig small intestine under a diameter limitation.展开更多
A novel non-cable whole tectorial membrane micro-robot for an endoscope is developed. The micro-robot we have fabricated and tested can propel itself in the intestine tract of a pig in an autonomous manner by earthwor...A novel non-cable whole tectorial membrane micro-robot for an endoscope is developed. The micro-robot we have fabricated and tested can propel itself in the intestine tract of a pig in an autonomous manner by earthworm-like locomotion. The silicone of bellow shape is laid over the outer surface of the micro-robot to reduce the affection of the viscoelastic properties of the intestine. Wireless power transfer and communication systems are employed to realize the non-cable locomotion of the mi-cro-robot. The prototype of the micro-robot is 13.5 mm in diameter and 108 mm in length. The experimental results show that the towing force for the micro-robot is about 0.8 N, which is much smaller than the maximum driving force 2.55 N of the linear actuator. The supplying power of the wireless power transfer system fulfills the needs of the micro-robot system and the mi-cro-robot can creep reliably in the large intestine of a pig and other contact environments.展开更多
The presented system consists of field devices, a control system and a host computer system. The field devices, which are composed of an in-pipe micro-robot, a displacement sensor, a curvature sensor, and an inner sur...The presented system consists of field devices, a control system and a host computer system. The field devices, which are composed of an in-pipe micro-robot, a displacement sensor, a curvature sensor, and an inner surface measurement unit, can go into the pipe to get the data of displace- ment and axis curvature, and the shape data of the inner surface. With the conic-shape laser beam shot by the inner surface measurement unit, the intersectional curve between the laser beam and the inner-surface of the tested pipe can be calculated in the local coordination system (LCS) of the inner surface measurement unit. The relation between the LCS and the global coordination system (GCS) can be deduced, too. After the robot reaches the end of the pipe, all measured intersectional curves can be translated into the same coordination system to become a point cloud of the inner surface of the pipe according to the relations between LCS and GCS. Depending on this points cloud, the CAD model of the inner surface of the pipe can be reconstructed easily with reverse engineering tools, and the feature of flaw of the pipe can be obtained with flaw analysis tools.展开更多
It is required to develop micro machine for inspection and maintenance of defects inside small pipe with diameter smaller than one inch. Considering the advantages of electromagnetic actuators with simple mechanism, h...It is required to develop micro machine for inspection and maintenance of defects inside small pipe with diameter smaller than one inch. Considering the advantages of electromagnetic actuators with simple mechanism, high response, convenience to control and fabricate, we tried to develop a new micro robot in small pipe based on interaction principle of electromagnetic attraction and spring force. This paper describes its structure and design. The dimension of the prototype is diameter of 15 mm, length of 30 mm and weight of 25 g. It can climb in small pipe of diameter of 20 mm with a speed of 6~8 mm/s in horizontal or in vertical situation.展开更多
Non-contact actuated microbeads have attracted a lot of attention in recent years because of its enormous potential in medical, biological, and industrial applications. Researchers have proposed a multitude of electro...Non-contact actuated microbeads have attracted a lot of attention in recent years because of its enormous potential in medical, biological, and industrial applications. Researchers have proposed a multitude of electromagnetic actuation(EMA) systems consisting of a variety of coil pairs. However, a unified method to design and optimize a coil pair according to technical specifications still does not exist. Initially, this paper presented the modeling of an untethered ferromagnetic particle actuated by externally applied magnetic field. Based on the models, a simple method of designing and optimizing the EMA coil pair according to technical specifications, was proposed. A loop-shaped coil pair generating uniform magnetic and gradient fields was chosen to demonstrate this method clearly and practically. The results of the optimization showed that the best distance to radius ratio of a loop-shaped coil pair is 1.02 for a uniform magnetic field and 1.75 for a uniform gradient field. The applicability of the method to other shapes of coil configuration was also illustrated. The best width to distance ratio for a square-shaped coil pair is 0.558 and 0.958 for uniform magnetic and gradient fields, respectively. The best height to width ratio and distance to width ratio for a rectangle-shaped coil pair is h/w =[0.9,1.1], d/w =[0.5,0.6] for uniform magnetic field and h/w =[1.0,1.2], d/w =[0.9,1.1] for uniform gradient field. Furthermore, simulations of a microparticle tracking the targeted trajectory were conducted to analyze the performance of the newly designed coils. The simulations suggested the ability of manipulating microparticles via the coils designed by our proposed method. The research mainly proposed a unified design and optimization method for a coil pair, which can support researchers while designing a specific coil pair according to the technical requirements. This study is aimed at researchers who are interested in EMA system and microrobots.展开更多
The mathematical model of a micro piezoelectric elastic legged robot in pipeline was founded. The robotic resonant frequency worked out with the mathematical model is nearly equal to the frequency from experiment. It ...The mathematical model of a micro piezoelectric elastic legged robot in pipeline was founded. The robotic resonant frequency worked out with the mathematical model is nearly equal to the frequency from experiment. It indicates that the mathematical model of the robot is correct. Besides, it studied the piezoelectric robotic structure parameters’ effect on the robotic performance. The result of the analysis on the robot constructs the base of an optimal design of a piezoelectric robot.展开更多
Given the difficulty in hand coding task schemes, an intellectualized architecture of the autonomous micro mobile robot based behavior for fault repair was presented. Integrating the reinforcement learning and the...Given the difficulty in hand coding task schemes, an intellectualized architecture of the autonomous micro mobile robot based behavior for fault repair was presented. Integrating the reinforcement learning and the group behavior evolution simulating the human's learning and evolution, the autonomous micro mobile robot will automatically generate the suited actions satisfied the environment. However, the designer only devises some basic behaviors, which decreases the workload of the designer and cognitive deficiency of the robot to the environment. The results of simulation have shown that the architecture endows micro robot with the ability of learning, adaptation and robustness, also with the ability of accomplishing the given task.展开更多
A novel bio-mimetic wireless micro robot for endoscope is developed.Its autonomous manner is earthworm-like and driven by linear actuators based on DC motor.It is different from the conventional micro robot endoscope ...A novel bio-mimetic wireless micro robot for endoscope is developed.Its autonomous manner is earthworm-like and driven by linear actuators based on DC motor.It is different from the conventional micro robot endoscope that wireless module is used for communicating and power transfer.The fabricated micro robot system is detailedly described,including structure,micro robot locomotion principle,communication control module and wireless power transfer module.The experimental results show that the driving force of the linear actuator can reach to 2.55 N and supplying power is up to 480 mW DC power for receiving coil in the proposed system,which all fulfill the need of the micro robot system.The micro robot can creep reliably in the large intestine of pig and other contact environments.展开更多
The micro robot based on screw motion wheels, which features high payload/mass ratio, fast and continuous motion, adaptation to pipe diameter or roundness variations, is suitable for locomotion and inspection inside s...The micro robot based on screw motion wheels, which features high payload/mass ratio, fast and continuous motion, adaptation to pipe diameter or roundness variations, is suitable for locomotion and inspection inside small diameter pipelines. The robot inspection system, Tubot I, developed at Shanghai University is composed of locomotion mechanism with an inner motor, a micro CCD camera and a monitor outside the pipeline. In the paper, the kinematics and statics analyses are presented for the screw locomotion system of Tubot I. The moving characteristics are obtained from experiments on the robot prototype.展开更多
A new 6-DOF micro-manipulation robot based on 3-PPTTRS parallel mechanisms in combination with flexure hinges is proposed. The design principle of the mechanism is introduced, and the kinematics analysis method based ...A new 6-DOF micro-manipulation robot based on 3-PPTTRS parallel mechanisms in combination with flexure hinges is proposed. The design principle of the mechanism is introduced, and the kinematics analysis method based on differentiation is used to get the (inverse) kinematics equations. Then a micro-scale motion precision simulation method is proposed according to finite element analysis (FEA), and the prediction of robot’s motion precision in design phase is realized. The simulation result indicates that the 6-DOF micro-manipulation robot can meet the design specification.展开更多
Based on photogrammetry technology,a novel localization method of micro-polishing robot,which is restricted within certain working space,is presented in this paper.On the basis of pinhole camera model,a new mathematic...Based on photogrammetry technology,a novel localization method of micro-polishing robot,which is restricted within certain working space,is presented in this paper.On the basis of pinhole camera model,a new mathematical model of vision localization of automated polishing robot is established.The vision localization is based on the distance-constraints of feature points.The method to solve the mathematical model is discussed.According to the characteristics of gray image,an adaptive method of automatic threshold selection based on connected components is presented.The center coordinate of the feature image point is resolved by bilinear interpolation gray square weighted algorithm.Finally,the mathematical model of testing system is verified by global localization test.The experimental results show that the vision localization system in working space has high precision.展开更多
A 6-DOF micro-manipulation robot based on a 3-PPTTRS mechanism is proposed in this paper.Its static stiffness is an important index to evaluate load capacity and positioning accuracy.However,it is insufficient to cons...A 6-DOF micro-manipulation robot based on a 3-PPTTRS mechanism is proposed in this paper.Its static stiffness is an important index to evaluate load capacity and positioning accuracy.However,it is insufficient to consider the static stiffness only when the robot is in its initial pose.The stiffness in different positions and poses in its work space must be analyzed also.Thus a method to analyze the relationship between static stiffness and poses in the whole work space is presented.A static stiffness model is proposed first,and the relationship between structural parameters and static stiffness in different poses is discussed.The static stiffness analysis provides foundation for structural parameter design.展开更多
A wireless power transfer system for endoscopic micro-robot operating at 36 kHz is presented in this paper. The issue of patient’s health and safety regarding exposure to the electromagnetic field is addressed. The s...A wireless power transfer system for endoscopic micro-robot operating at 36 kHz is presented in this paper. The issue of patient’s health and safety regarding exposure to the electromagnetic field is addressed. The specific absorption rate and current density can be used to investigate the electromagnetic influences on the biological tissues surrounded by the wireless power launching coil. In view of this purpose,the limited close-wound solenoid electromagnetic model is built,the relationship between the electric intensity and the specific absorption rate and current density is deduced,and the simulation experiments are done. Experimental results show that the values of SAR and current density related to different tissue catalogs are all very small and do not exceed their own limits respectively when the resonance frequency of operation is 36 kHz.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.61273345)
文摘Most of the existing screw drive in-pipe robots cannot actively adjust the maximum traction capacity, which limits the adaptability to the wide range of variable environment resistance, especially in curved pipes. In order to solve this problem, a screw drive in-pipe robot based on adaptive linkage mechanism is proposed. The differential property of the adaptive linkage mechanism allows the robot to move without motion interference in the straight and varied curved pipes by adjusting inclining angles of rollers self-adaptively. The maximum traction capacity of the robot can be changed by actively adjusting the inclining angles of rollers. In order to improve the adaptability to the variable resistance, a torque control method based on the fuzzy controller is proposed. For the variable environment resistance, the proposed control method can not only ensure enough traction force, but also limit the output torque in a feasible region. In the simulations, the robot with the proposed control method is compared to the robot with fixed inclining angles of rollers. The results show that the combination of the torque control method and the proposed robot achieves the better adaptability to the variable resistance in the straight and curved pipes.
基金This project is supported by National Natural Science Foundation of China (No.60275034) and Provincical Natural Science Foundation of Liaoning (No. 20032119)
文摘A new method to drive and control micro in-pipe robot by means of magneticfield outside pipe is put forward, in which wireless micro robot can move forward driven by thevibration of its legs through converting magnetic energy into mechanical one under the action ofpiezomagnetism and magnetomechanical coupling of its micro GMA, when time varied oscillatingmagnetic field with different frequency applied outside pipe. Firstly its systematical structure andoperation principle are introduced, and energy converting process from outside magnetic one intomechanical one is analyzed through setting up the magnetic and mechanical dynamic model of GMA andestablishing dynamic model of two stage amplifier of mobile earner. Robot systematical experimentsshow the correctness of the theoretical analysis and its feasibility. As a result, drive and controlmethod without cable through outside magnetic field is realized.
基金This project is supported by National Natural Science Foundation of China (No.59835160).
文摘Performance of giant magnetostrictive material (GMM) is introduced. Principleof work, basic structure and key techniques of giant magnetostrictive actuator (GMA) are analyzed.Its dynamic models of magneto-mechanical coupling are established. The structure and principle ofthe pneumatic servo valve and the micro pipe robot with new homemade GMM are presented. Theexperiment is carried out under typical working conditions. The experiment results show that the GMMpneumatic servo valve has wide pressure control characteristics, good linearity, and fast responsespeed. The movement principles of the GMM robot system are reliably feasible and its maximal movingspeed is about 8 mm/s. It is preferable to the driving frequency of the robot within 100 approx 300Hz.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.60901074,51075092,61005076,and 61175107)the National High Technology Research and Development Program of China(Grant No.2007AA042105)the Natural Science Foundation of Heilongjiang Province,China(Grant No.E200903)
文摘This paper develops a fast filtering algorithm based on vibration systems theory and neural information exchange approach. The characters, including the derivation process and parameter analysis, are discussed and the feasibility and the effectiveness are testified by the filtering performance compared with various filtering methods, such as the fast wavelet transform algorithm, the particle filtering method and our previously developed single degree of freedom vibration system filtering algorithm, according to simulation and practical approaches. Meanwhile, the comparisons indicate that a significant advantage of the proposed fast filtering algorithm is its extremely fast filtering speed with good filtering perfi^rmance. Further, the developed fast filtering algorithm is applied to the navigation and positioning system of the micro motion robot, which is a high real-time requirement for the signals preprocessing. Then, the preprocessing data is used to estimate the heading angle error and the attitude angle error of the micro motion robot. The estimation experiments illustrate the high practicality of the proposed fast filtering algorithm.
文摘This paper proposes an anchoring and extending micro intestinal robot for medical inspection and surgery propose. The three-leg anchoring method is discussed in detail, and micro robot phantom model is used to test anchoring related parameters for mechanical design. A prototype is designed and fabricated base on the experiment results and is tested in in-vitro experiment. The prototype is locomotive in a pig small intestine under a diameter limitation.
基金Project (No. 2007AA04Z234) supported by the Hi-Tech Researchand Development Program (863) of China
文摘A novel non-cable whole tectorial membrane micro-robot for an endoscope is developed. The micro-robot we have fabricated and tested can propel itself in the intestine tract of a pig in an autonomous manner by earthworm-like locomotion. The silicone of bellow shape is laid over the outer surface of the micro-robot to reduce the affection of the viscoelastic properties of the intestine. Wireless power transfer and communication systems are employed to realize the non-cable locomotion of the mi-cro-robot. The prototype of the micro-robot is 13.5 mm in diameter and 108 mm in length. The experimental results show that the towing force for the micro-robot is about 0.8 N, which is much smaller than the maximum driving force 2.55 N of the linear actuator. The supplying power of the wireless power transfer system fulfills the needs of the micro-robot system and the mi-cro-robot can creep reliably in the large intestine of a pig and other contact environments.
基金This project is supported by National Hi-tech Research and DevelopmentProgram of China (863 program, No.2001AA423130).
文摘The presented system consists of field devices, a control system and a host computer system. The field devices, which are composed of an in-pipe micro-robot, a displacement sensor, a curvature sensor, and an inner surface measurement unit, can go into the pipe to get the data of displace- ment and axis curvature, and the shape data of the inner surface. With the conic-shape laser beam shot by the inner surface measurement unit, the intersectional curve between the laser beam and the inner-surface of the tested pipe can be calculated in the local coordination system (LCS) of the inner surface measurement unit. The relation between the LCS and the global coordination system (GCS) can be deduced, too. After the robot reaches the end of the pipe, all measured intersectional curves can be translated into the same coordination system to become a point cloud of the inner surface of the pipe according to the relations between LCS and GCS. Depending on this points cloud, the CAD model of the inner surface of the pipe can be reconstructed easily with reverse engineering tools, and the feature of flaw of the pipe can be obtained with flaw analysis tools.
文摘It is required to develop micro machine for inspection and maintenance of defects inside small pipe with diameter smaller than one inch. Considering the advantages of electromagnetic actuators with simple mechanism, high response, convenience to control and fabricate, we tried to develop a new micro robot in small pipe based on interaction principle of electromagnetic attraction and spring force. This paper describes its structure and design. The dimension of the prototype is diameter of 15 mm, length of 30 mm and weight of 25 g. It can climb in small pipe of diameter of 20 mm with a speed of 6~8 mm/s in horizontal or in vertical situation.
基金Supported by Aerospace Research Project(Grant No.040102)
文摘Non-contact actuated microbeads have attracted a lot of attention in recent years because of its enormous potential in medical, biological, and industrial applications. Researchers have proposed a multitude of electromagnetic actuation(EMA) systems consisting of a variety of coil pairs. However, a unified method to design and optimize a coil pair according to technical specifications still does not exist. Initially, this paper presented the modeling of an untethered ferromagnetic particle actuated by externally applied magnetic field. Based on the models, a simple method of designing and optimizing the EMA coil pair according to technical specifications, was proposed. A loop-shaped coil pair generating uniform magnetic and gradient fields was chosen to demonstrate this method clearly and practically. The results of the optimization showed that the best distance to radius ratio of a loop-shaped coil pair is 1.02 for a uniform magnetic field and 1.75 for a uniform gradient field. The applicability of the method to other shapes of coil configuration was also illustrated. The best width to distance ratio for a square-shaped coil pair is 0.558 and 0.958 for uniform magnetic and gradient fields, respectively. The best height to width ratio and distance to width ratio for a rectangle-shaped coil pair is h/w =[0.9,1.1], d/w =[0.5,0.6] for uniform magnetic field and h/w =[1.0,1.2], d/w =[0.9,1.1] for uniform gradient field. Furthermore, simulations of a microparticle tracking the targeted trajectory were conducted to analyze the performance of the newly designed coils. The simulations suggested the ability of manipulating microparticles via the coils designed by our proposed method. The research mainly proposed a unified design and optimization method for a coil pair, which can support researchers while designing a specific coil pair according to the technical requirements. This study is aimed at researchers who are interested in EMA system and microrobots.
文摘The mathematical model of a micro piezoelectric elastic legged robot in pipeline was founded. The robotic resonant frequency worked out with the mathematical model is nearly equal to the frequency from experiment. It indicates that the mathematical model of the robot is correct. Besides, it studied the piezoelectric robotic structure parameters’ effect on the robotic performance. The result of the analysis on the robot constructs the base of an optimal design of a piezoelectric robot.
文摘Given the difficulty in hand coding task schemes, an intellectualized architecture of the autonomous micro mobile robot based behavior for fault repair was presented. Integrating the reinforcement learning and the group behavior evolution simulating the human's learning and evolution, the autonomous micro mobile robot will automatically generate the suited actions satisfied the environment. However, the designer only devises some basic behaviors, which decreases the workload of the designer and cognitive deficiency of the robot to the environment. The results of simulation have shown that the architecture endows micro robot with the ability of learning, adaptation and robustness, also with the ability of accomplishing the given task.
基金National Natural Science Foundation of China(No.30570485)National High Technology Research and Development Program of China(No.2006AA04Z368)
文摘A novel bio-mimetic wireless micro robot for endoscope is developed.Its autonomous manner is earthworm-like and driven by linear actuators based on DC motor.It is different from the conventional micro robot endoscope that wireless module is used for communicating and power transfer.The fabricated micro robot system is detailedly described,including structure,micro robot locomotion principle,communication control module and wireless power transfer module.The experimental results show that the driving force of the linear actuator can reach to 2.55 N and supplying power is up to 480 mW DC power for receiving coil in the proposed system,which all fulfill the need of the micro robot system.The micro robot can creep reliably in the large intestine of pig and other contact environments.
基金Supported by National High TechR&DProgramin China!( 86 3 5 1 2 970 4 2 6 86 3 5 1 2 980 4 1 8)
文摘The micro robot based on screw motion wheels, which features high payload/mass ratio, fast and continuous motion, adaptation to pipe diameter or roundness variations, is suitable for locomotion and inspection inside small diameter pipelines. The robot inspection system, Tubot I, developed at Shanghai University is composed of locomotion mechanism with an inner motor, a micro CCD camera and a monitor outside the pipeline. In the paper, the kinematics and statics analyses are presented for the screw locomotion system of Tubot I. The moving characteristics are obtained from experiments on the robot prototype.
基金the Research Fund for the Doctoral Programof Higher Education(20060007023)
文摘A new 6-DOF micro-manipulation robot based on 3-PPTTRS parallel mechanisms in combination with flexure hinges is proposed. The design principle of the mechanism is introduced, and the kinematics analysis method based on differentiation is used to get the (inverse) kinematics equations. Then a micro-scale motion precision simulation method is proposed according to finite element analysis (FEA), and the prediction of robot’s motion precision in design phase is realized. The simulation result indicates that the 6-DOF micro-manipulation robot can meet the design specification.
基金supported by the National High Technology Research and Development Program of China (Grant No. 2006AA04Z214)the National Natural Science Foundation of China (Grant No. 50575092)
文摘Based on photogrammetry technology,a novel localization method of micro-polishing robot,which is restricted within certain working space,is presented in this paper.On the basis of pinhole camera model,a new mathematical model of vision localization of automated polishing robot is established.The vision localization is based on the distance-constraints of feature points.The method to solve the mathematical model is discussed.According to the characteristics of gray image,an adaptive method of automatic threshold selection based on connected components is presented.The center coordinate of the feature image point is resolved by bilinear interpolation gray square weighted algorithm.Finally,the mathematical model of testing system is verified by global localization test.The experimental results show that the vision localization system in working space has high precision.
文摘A 6-DOF micro-manipulation robot based on a 3-PPTTRS mechanism is proposed in this paper.Its static stiffness is an important index to evaluate load capacity and positioning accuracy.However,it is insufficient to consider the static stiffness only when the robot is in its initial pose.The stiffness in different positions and poses in its work space must be analyzed also.Thus a method to analyze the relationship between static stiffness and poses in the whole work space is presented.A static stiffness model is proposed first,and the relationship between structural parameters and static stiffness in different poses is discussed.The static stiffness analysis provides foundation for structural parameter design.
文摘A wireless power transfer system for endoscopic micro-robot operating at 36 kHz is presented in this paper. The issue of patient’s health and safety regarding exposure to the electromagnetic field is addressed. The specific absorption rate and current density can be used to investigate the electromagnetic influences on the biological tissues surrounded by the wireless power launching coil. In view of this purpose,the limited close-wound solenoid electromagnetic model is built,the relationship between the electric intensity and the specific absorption rate and current density is deduced,and the simulation experiments are done. Experimental results show that the values of SAR and current density related to different tissue catalogs are all very small and do not exceed their own limits respectively when the resonance frequency of operation is 36 kHz.