Mge3Lie0.4Zr alloys containing RE elements(Gd,La,Nd)(Mge3LieREe0.4Zr alloys)are investigated to reveal the influence of homogenization treatment on microstructures and distributions of RE,Zr elements.It is found that...Mge3Lie0.4Zr alloys containing RE elements(Gd,La,Nd)(Mge3LieREe0.4Zr alloys)are investigated to reveal the influence of homogenization treatment on microstructures and distributions of RE,Zr elements.It is found that 300C24 h homogenization treatment shows better improvement on the microstructure including the refinement of grain size,the dispersion of cellular dendrite and low melting point particles.Before treatment,La and Nd segregate effectively at grain boundary and Zr segregates in the form of precipitates.Homogenization treatment induces the reduction of RE segregation.However,the segregation of Zr in precipitates cannot be abated due to the relatively low diffusion rate compared with RE elements.展开更多
The solidification features,micro segregation,and fracture characteristics of cobalt based alloy on the substrate of 20CrMo steel by laser cladding were studied by using electron microscopy.Experimental results show...The solidification features,micro segregation,and fracture characteristics of cobalt based alloy on the substrate of 20CrMo steel by laser cladding were studied by using electron microscopy.Experimental results show that the fine columnar grains and cellular dendrite grains are obtained which are perpendicular to the coating/substrate interface;the primary arms are straight while the side branches are degenerated;the microstructure consists of primary face centered cubic (fcc) Co dendrites and a network of Cr enriched eutectic M23C6 (M=Cr,W,Fe) carbides;the micro segregation is severe for the rapid heating and cooling of laser cladding;the typical brittle intergranular fracture occurs in cobalt based laser cladding layer.展开更多
The first micro segregation under conditions of twin roll strip casting was simulated. The relationship between the temperature and solid fraction in the mushy zone was given. The temperatures such as ZDT, LIT were g...The first micro segregation under conditions of twin roll strip casting was simulated. The relationship between the temperature and solid fraction in the mushy zone was given. The temperatures such as ZDT, LIT were got from this simulation. Then using the turbulent model, the flow field and thermal field in the pool of twin roll strip caster was simulated. The speed and temperature at different casting speed was given, and the results were also explained. By these two simulations, the appropriate casting speed can be found. These simulations can provide effective data for controlling the twin roll strip casting process.展开更多
基金This work was supported by the Major State Basic Research Development Program of China(No.2013CB632203)National Key Technology R&D Program of China(2011BAE22B03)+3 种基金(2012BAF09B01)National Natural Science Foundation of China(51074207)Chinese Postdoctoral Science Foundation(2012M520634)the Fundamental Research Foundation of Central Universities(Grant Nos.N120509002 and N120309003).
文摘Mge3Lie0.4Zr alloys containing RE elements(Gd,La,Nd)(Mge3LieREe0.4Zr alloys)are investigated to reveal the influence of homogenization treatment on microstructures and distributions of RE,Zr elements.It is found that 300C24 h homogenization treatment shows better improvement on the microstructure including the refinement of grain size,the dispersion of cellular dendrite and low melting point particles.Before treatment,La and Nd segregate effectively at grain boundary and Zr segregates in the form of precipitates.Homogenization treatment induces the reduction of RE segregation.However,the segregation of Zr in precipitates cannot be abated due to the relatively low diffusion rate compared with RE elements.
文摘The solidification features,micro segregation,and fracture characteristics of cobalt based alloy on the substrate of 20CrMo steel by laser cladding were studied by using electron microscopy.Experimental results show that the fine columnar grains and cellular dendrite grains are obtained which are perpendicular to the coating/substrate interface;the primary arms are straight while the side branches are degenerated;the microstructure consists of primary face centered cubic (fcc) Co dendrites and a network of Cr enriched eutectic M23C6 (M=Cr,W,Fe) carbides;the micro segregation is severe for the rapid heating and cooling of laser cladding;the typical brittle intergranular fracture occurs in cobalt based laser cladding layer.
基金Item Sponsored by National of Natural Science Foundation(59774015)
文摘The first micro segregation under conditions of twin roll strip casting was simulated. The relationship between the temperature and solid fraction in the mushy zone was given. The temperatures such as ZDT, LIT were got from this simulation. Then using the turbulent model, the flow field and thermal field in the pool of twin roll strip caster was simulated. The speed and temperature at different casting speed was given, and the results were also explained. By these two simulations, the appropriate casting speed can be found. These simulations can provide effective data for controlling the twin roll strip casting process.
