A Y-zeolite-containing composite material with micro/mesoporous structure had been synthesized from kaolin by means of the in-situ crystallization method. The obtained samples were investigated by XRD and BET methods....A Y-zeolite-containing composite material with micro/mesoporous structure had been synthesized from kaolin by means of the in-situ crystallization method. The obtained samples were investigated by XRD and BET methods. Evaluation of catalytic activity of both the commercial Y-zeolite and the novel Y-zeolite-containing composite material was carried out in the pulse micro-chromatography platform with two probe molecules of different molecular sizes： VGO feedstock and 1,3,5 tri-isopropyl benzene. It was found that the Y-zeolite-containing composite material was richer in external surface and meso-/macro-pores; the Y-zeolite-containing composite material demonstrated a smaller rate of deactivation compared to the commercial Y-zeolite.展开更多
The lanthanum aluminum mesoporous materials were synthesized using sodium dodecyl sulfate as a template agent by ultrasonic hydrothermal method.The resulting samples were characterized by low angle X-ray diffraction（...The lanthanum aluminum mesoporous materials were synthesized using sodium dodecyl sulfate as a template agent by ultrasonic hydrothermal method.The resulting samples were characterized by low angle X-ray diffraction（XRD）,N2 adsorption-desorption studies,transmission electron microscopy（TEM）and surface morphology analysis（SEM）,surface acid（NH3-TPD）,reducibility properties（TPR）,X-ray energy dispersive spectrometer（EDS）and thermogravimetric analysis（TG/DTG）.A l/La composite mesoporous material were synthesized with n（Al）︰n（La）=70︰1.0,80°C of reaction temperature,20 h of reaction time,12 h of crystallization time,650°C of calcination temperature.The specific surface area of the sample is 273.90 m 2 ·g ？1 ,with the average diameter 5.642 nm and pore volume 0.2354 cm 3 ·g ？1 .The samples have mesoporous structure and its particles are similar to a worm-shaped tubular structure.The influence of calcination temperature on the surface physical and chemical properties of Al/La composited mesoporous materials was examined,and the results showed that the acid strength was increased but the amount of acidic sites is decreased as the calcination temperature increased.It was found that the sample calcined at 650°C had appropriate acid content,acid strength and better reducibility.展开更多
A mesoporous LiFe0.99Mo0.01PO4/C composite was synthesized by the sol-gel method using （NH4）2MoO4 as a doping starting material. The formation of conductive carbon, metal doping and mesopores was achieved simultaneo...A mesoporous LiFe0.99Mo0.01PO4/C composite was synthesized by the sol-gel method using （NH4）2MoO4 as a doping starting material. The formation of conductive carbon, metal doping and mesopores was achieved simultaneously in the prepared material. The characterizations of crystal structures and microstructures were investigated using X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, extended X-ray-absorption fine-structure （EXAFS） and X-ray-absorption near-structure spectroscopy （XANES） while the surface area was determined using N2 adsorption techniques. Cyclic voltammetry （CV） and charge-discharge cycling performance were used to characterize its electrochemical properties. The sample possessed uniformly distributed mesopores with an average pore size of 4 nm, and the specific surface area was about 69.368 m^2/g. The results show that the reversible capacity of mesoporous LiFe0.99Mo0.01PO4/C is about 160 mAh/g at 0.1C, 135 mAh/g at 1C and 90 mAh/g at 5C, respectively. The capacity fading is neglectable.展开更多
This work presents a synthesis of bimetallic NiMo and NiW modified ZSM-5/MCM-41 composites and their heterogeneous catalytic conversion of crude palm oil( CPO) to biofuels. The ZSM-5/MCM-41 composites were synthesized...This work presents a synthesis of bimetallic NiMo and NiW modified ZSM-5/MCM-41 composites and their heterogeneous catalytic conversion of crude palm oil( CPO) to biofuels. The ZSM-5/MCM-41 composites were synthesized through a self-assembly of cetyltrimethylammonium bromide( CTAB) surfactant with silica-alumina from ZSM-5 zeolite,prepared from natural kaolin by the hydrothermal technique. Subsequently,the synthesized composites were deposited with bimetallic NiMo and NiW by impregnation method. The obtained catalysts presented a micro-mesoporous structure,confirmed by XRD,SEM,TEM,EDX,NH_3-TPD,XRF and N_2 adsorption-desorption measurements. The results of CPO conversion demonstrate that the catalytic activity of the synthesized catalysts decreases in the series of NiMo-ZSM-5/MCM-41 > NiW-ZSM-5/MCM-41 > Ni-ZSM-5/MCM-41 > Mo-ZSM-5/MCM-41 > W-ZSM-5/MCM-41 > NiMo-ZSM-5 > NiW-ZSM-5 > ZSM-5/MCM-41 > ZSM-5 > MCM-41. It was found that the bimetallic NiMo-and NiW-ZSM-5/MCM-41 catalysts give higher yields of liquid hydrocarbons than other catalysts at a given conversion. Types of hydrocarbon in liquid products,identified by simulated distillation gas chromatography-flame ionization detector( SimDis GC-FID),are gasoline( 150-200 ℃; C5-12),kerosene( 250-300 ℃; C5-20) and diesel( 350 ℃; C7-20).Moreover,the conversion of CPO to biofuel products using the NiMo-and NiW-ZSM-5/MCM-41 catalysts offers no statistically significant difference( P> 0.05) at 95% confidence level,evaluated by SPSS analysis.展开更多
Goal: Low wolfram-containing cutting composite was obtained by fusion of titanium carbonitride and high melting temperature binding metallic phase. Method: The composite was obtained via compaction and further sinteri...Goal: Low wolfram-containing cutting composite was obtained by fusion of titanium carbonitride and high melting temperature binding metallic phase. Method: The composite was obtained via compaction and further sintering in vacuum furnace at 1600°C under 10<sup>-3</sup> Pa pressure. Phase analysis was performed on X-ray apparatus “DRON-3”;microstructure was determined by electron microscope NANOLAB-7, microhardness by MUCKE-mark microhardness meter;relative resistance of cutters was evaluated at similar modes of cutting according to distances they passed;experiments were carried out on turning lathe. Results: Physical-mechanical characteristics of the obtained composite are: σ<sub>bend</sub>, = 1000 - 1150 MPa, σ<sub>bend1000</sub>°C = 600 MPa, HV = 14 GPa;HV<sub>1000</sub>°C = 6.5 GPa. High speeds of cutting and high temperatures resistance of cutters made by the obtained composites exceeds 1.5 - 2-folds that of cutters made of the known BK8 and KNT20 hard alloys. Conclusion: Its application is recommended in hot steel treatment by cutting, for removal of the so-called burrs, as well as in steel treatment by cutting during pure and semi-pure operations. It can also be used in jet engines, chemical industry apparatuses, electric-vacuum devices, in industry of responsible details of rockets, nuclear reactors, flying apparatuses.展开更多
Adsorption of pure CO_(2) and N2 and separation of CO_(2)/N2 mixture in MFI zeolite and MFI/MCM-41 micro/mesoporous composite have been studied by using atomistic simulations.Fully atomistic models of MFI and MFI/MCM-...Adsorption of pure CO_(2) and N2 and separation of CO_(2)/N2 mixture in MFI zeolite and MFI/MCM-41 micro/mesoporous composite have been studied by using atomistic simulations.Fully atomistic models of MFI and MFI/MCM-41 are constructed and characterized.A bimodal pore size distribution is observed in MFI/MCM-41 from simulated small-and broad-angle X-ray diffrac-tion patterns.The density of MFI/MCM-41 is lower than MFI,while its free volume and specific surface area are greater than MFI due to the presence of mesopores.CO_(2) is preferentially adsorbed than N2,and thus,the loading and isosteric heat of CO_(2) are greater than N2 in both MFI and MFI/MCM-41.CO_(2) isotherm in MFI/MCM-41 is similar to that in MFI at low pressures,but resembles that in MCM-41 at high pressures.N2 shows similar amount of loading in MFI,MCM-41 and MFI/MCM-41.The selectivity of CO_(2) over N2 in the three adsorbents decreases in the order of MFI>MFI/MCM-41>MCM-41.With increasing pressure,the selectivity increases in MFI and MFI/MCM-41,but decreases in MCM-41.The self-diffusivity of CO_(2) and N2 in MFI decreases as loading increases,while in MFI/MCM-41,itfirst increases and then drops.展开更多
The recent advancement in the design,synthesis,and fabrication of micro/nano structured LiNixCoyMnzO2 with one-,two-,and three-dimensional morphologies was reviewed.The major goal is to highlight LiNixCoyMnzO2 materia...The recent advancement in the design,synthesis,and fabrication of micro/nano structured LiNixCoyMnzO2 with one-,two-,and three-dimensional morphologies was reviewed.The major goal is to highlight LiNixCoyMnzO2 materials,which have been utilized in lithium ion batteries with enhanced energy and power density,high energy efficiency,superior rate capability and excellent cycling stability resulting from the doping,surface coating,nanocomposites and nano-architecturing.展开更多
随着军事和民用技术的快速发展,对航空、户外等领域所用器件在复杂环境下的稳定性提出了更为严格的要求。这些器件经常需要在较大的温度变化范围内工作,而温度变化所带来的材料体积变化是器件结构受损,功能失效的重要原因之一。因此,如...随着军事和民用技术的快速发展,对航空、户外等领域所用器件在复杂环境下的稳定性提出了更为严格的要求。这些器件经常需要在较大的温度变化范围内工作,而温度变化所带来的材料体积变化是器件结构受损,功能失效的重要原因之一。因此,如航空航天设备中所用的精密结构件不仅需要具有优秀的导电、导热性能,还需要保证其在温度变化过程中具有较低的热膨胀系数。因此,研究制备具有近零膨胀性能的材料便成为解决这些问题的重要方法之一。在本研究中,作者通过改变烧结温度,制备出一系列介孔铁电PbTiO_(3)(PTO)陶瓷,通过测试结果展示了材料的热导率、热膨胀系数与烧结温度的关系。进一步通过三维重构技术(Tomography)与高角度环形暗场像(high angle annular dark field,HAADF),分析了改变烧结温度对于介孔尺寸、分布密度的影响,以及单个介孔表面附近的铁电屏蔽效应影响范围,从而解释了烧结温度的变化与介孔的分布密度、尺寸大小以及热膨胀行为之间的紧密联系。随着烧结温度的降低,介孔对材料铁电屏蔽效应的总区域占比逐渐升高,从而使材料正膨胀系数增大,导致材料表现出近零膨胀。为进一步提高材料的热导率,提升材料的多功能性,将这一材料与石墨烯进行复合,通过改变烧结温度与石墨烯的复合比例,进一步使材料的热膨胀系数趋近于零膨胀,并通过调整烧结温度与复合比例,得到膨胀系数低至7×10^(-7)℃^(-1),热导率比单相陶瓷提升约65%的近零膨胀复合陶瓷。这种材料可以在芯片封装,航天器外壳,通讯设备等材料领域得到进一步广泛应用的空间。展开更多
文摘A Y-zeolite-containing composite material with micro/mesoporous structure had been synthesized from kaolin by means of the in-situ crystallization method. The obtained samples were investigated by XRD and BET methods. Evaluation of catalytic activity of both the commercial Y-zeolite and the novel Y-zeolite-containing composite material was carried out in the pulse micro-chromatography platform with two probe molecules of different molecular sizes： VGO feedstock and 1,3,5 tri-isopropyl benzene. It was found that the Y-zeolite-containing composite material was richer in external surface and meso-/macro-pores; the Y-zeolite-containing composite material demonstrated a smaller rate of deactivation compared to the commercial Y-zeolite.
文摘The lanthanum aluminum mesoporous materials were synthesized using sodium dodecyl sulfate as a template agent by ultrasonic hydrothermal method.The resulting samples were characterized by low angle X-ray diffraction（XRD）,N2 adsorption-desorption studies,transmission electron microscopy（TEM）and surface morphology analysis（SEM）,surface acid（NH3-TPD）,reducibility properties（TPR）,X-ray energy dispersive spectrometer（EDS）and thermogravimetric analysis（TG/DTG）.A l/La composite mesoporous material were synthesized with n（Al）︰n（La）=70︰1.0,80°C of reaction temperature,20 h of reaction time,12 h of crystallization time,650°C of calcination temperature.The specific surface area of the sample is 273.90 m 2 ·g ？1 ,with the average diameter 5.642 nm and pore volume 0.2354 cm 3 ·g ？1 .The samples have mesoporous structure and its particles are similar to a worm-shaped tubular structure.The influence of calcination temperature on the surface physical and chemical properties of Al/La composited mesoporous materials was examined,and the results showed that the acid strength was increased but the amount of acidic sites is decreased as the calcination temperature increased.It was found that the sample calcined at 650°C had appropriate acid content,acid strength and better reducibility.
基金supported by Beijing Natural Science Foundation (No. 207001)the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Munici-pality, and the Major State Basic Research Development Program of China (No. 2002CB211807)+1 种基金supported partly by the National Out-standing Youth Fund of China (No. 10125523 to Z.W.)the Knowledge Innovation Program of Chinese Academy of Sciences (KJCX2-SW-N11, KJCX2-SW -H12-02)
文摘A mesoporous LiFe0.99Mo0.01PO4/C composite was synthesized by the sol-gel method using （NH4）2MoO4 as a doping starting material. The formation of conductive carbon, metal doping and mesopores was achieved simultaneously in the prepared material. The characterizations of crystal structures and microstructures were investigated using X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, extended X-ray-absorption fine-structure （EXAFS） and X-ray-absorption near-structure spectroscopy （XANES） while the surface area was determined using N2 adsorption techniques. Cyclic voltammetry （CV） and charge-discharge cycling performance were used to characterize its electrochemical properties. The sample possessed uniformly distributed mesopores with an average pore size of 4 nm, and the specific surface area was about 69.368 m^2/g. The results show that the reversible capacity of mesoporous LiFe0.99Mo0.01PO4/C is about 160 mAh/g at 0.1C, 135 mAh/g at 1C and 90 mAh/g at 5C, respectively. The capacity fading is neglectable.
基金The financial supported by Nakhon Ratchasima Rajabhat University,Nakhon Ratchasimathe National Research Council of Thailand+3 种基金Center of Excellence for Innovation in Chemistry (PERCH-CIC)Office of the Higher Education CommissionMinistry of Education and Materials Chemistry Research CenterDepartment of Chemistry Faculty of Science,Khon Kaen University,Thailand
文摘This work presents a synthesis of bimetallic NiMo and NiW modified ZSM-5/MCM-41 composites and their heterogeneous catalytic conversion of crude palm oil( CPO) to biofuels. The ZSM-5/MCM-41 composites were synthesized through a self-assembly of cetyltrimethylammonium bromide( CTAB) surfactant with silica-alumina from ZSM-5 zeolite,prepared from natural kaolin by the hydrothermal technique. Subsequently,the synthesized composites were deposited with bimetallic NiMo and NiW by impregnation method. The obtained catalysts presented a micro-mesoporous structure,confirmed by XRD,SEM,TEM,EDX,NH_3-TPD,XRF and N_2 adsorption-desorption measurements. The results of CPO conversion demonstrate that the catalytic activity of the synthesized catalysts decreases in the series of NiMo-ZSM-5/MCM-41 > NiW-ZSM-5/MCM-41 > Ni-ZSM-5/MCM-41 > Mo-ZSM-5/MCM-41 > W-ZSM-5/MCM-41 > NiMo-ZSM-5 > NiW-ZSM-5 > ZSM-5/MCM-41 > ZSM-5 > MCM-41. It was found that the bimetallic NiMo-and NiW-ZSM-5/MCM-41 catalysts give higher yields of liquid hydrocarbons than other catalysts at a given conversion. Types of hydrocarbon in liquid products,identified by simulated distillation gas chromatography-flame ionization detector( SimDis GC-FID),are gasoline( 150-200 ℃; C5-12),kerosene( 250-300 ℃; C5-20) and diesel( 350 ℃; C7-20).Moreover,the conversion of CPO to biofuel products using the NiMo-and NiW-ZSM-5/MCM-41 catalysts offers no statistically significant difference( P> 0.05) at 95% confidence level,evaluated by SPSS analysis.
文摘Goal: Low wolfram-containing cutting composite was obtained by fusion of titanium carbonitride and high melting temperature binding metallic phase. Method: The composite was obtained via compaction and further sintering in vacuum furnace at 1600°C under 10<sup>-3</sup> Pa pressure. Phase analysis was performed on X-ray apparatus “DRON-3”;microstructure was determined by electron microscope NANOLAB-7, microhardness by MUCKE-mark microhardness meter;relative resistance of cutters was evaluated at similar modes of cutting according to distances they passed;experiments were carried out on turning lathe. Results: Physical-mechanical characteristics of the obtained composite are: σ<sub>bend</sub>, = 1000 - 1150 MPa, σ<sub>bend1000</sub>°C = 600 MPa, HV = 14 GPa;HV<sub>1000</sub>°C = 6.5 GPa. High speeds of cutting and high temperatures resistance of cutters made by the obtained composites exceeds 1.5 - 2-folds that of cutters made of the known BK8 and KNT20 hard alloys. Conclusion: Its application is recommended in hot steel treatment by cutting, for removal of the so-called burrs, as well as in steel treatment by cutting during pure and semi-pure operations. It can also be used in jet engines, chemical industry apparatuses, electric-vacuum devices, in industry of responsible details of rockets, nuclear reactors, flying apparatuses.
基金supported by the National Natural Science Foundation of China(Grant Nos.20736002,20776045)the National High Technology Research and Development Program of China(No.2008AA062302)+1 种基金Program for Changjiang Scholars and Innovative Research Team in University of China(No.IRT0721)the 111 Project of China(No.B08021).
文摘Adsorption of pure CO_(2) and N2 and separation of CO_(2)/N2 mixture in MFI zeolite and MFI/MCM-41 micro/mesoporous composite have been studied by using atomistic simulations.Fully atomistic models of MFI and MFI/MCM-41 are constructed and characterized.A bimodal pore size distribution is observed in MFI/MCM-41 from simulated small-and broad-angle X-ray diffrac-tion patterns.The density of MFI/MCM-41 is lower than MFI,while its free volume and specific surface area are greater than MFI due to the presence of mesopores.CO_(2) is preferentially adsorbed than N2,and thus,the loading and isosteric heat of CO_(2) are greater than N2 in both MFI and MFI/MCM-41.CO_(2) isotherm in MFI/MCM-41 is similar to that in MFI at low pressures,but resembles that in MCM-41 at high pressures.N2 shows similar amount of loading in MFI,MCM-41 and MFI/MCM-41.The selectivity of CO_(2) over N2 in the three adsorbents decreases in the order of MFI>MFI/MCM-41>MCM-41.With increasing pressure,the selectivity increases in MFI and MFI/MCM-41,but decreases in MCM-41.The self-diffusivity of CO_(2) and N2 in MFI decreases as loading increases,while in MFI/MCM-41,itfirst increases and then drops.
基金Projects(51134007,21003161,21250110060) supported by the National Natural Science Foundation of ChinaProject(11MX10) supported by Central South University Annual Mittal-Founded Innovation ProjectProject(2011ssxt086) supported by Fundamental Research Funds for the Central Universities,China
文摘The recent advancement in the design,synthesis,and fabrication of micro/nano structured LiNixCoyMnzO2 with one-,two-,and three-dimensional morphologies was reviewed.The major goal is to highlight LiNixCoyMnzO2 materials,which have been utilized in lithium ion batteries with enhanced energy and power density,high energy efficiency,superior rate capability and excellent cycling stability resulting from the doping,surface coating,nanocomposites and nano-architecturing.
文摘随着军事和民用技术的快速发展,对航空、户外等领域所用器件在复杂环境下的稳定性提出了更为严格的要求。这些器件经常需要在较大的温度变化范围内工作,而温度变化所带来的材料体积变化是器件结构受损,功能失效的重要原因之一。因此,如航空航天设备中所用的精密结构件不仅需要具有优秀的导电、导热性能,还需要保证其在温度变化过程中具有较低的热膨胀系数。因此,研究制备具有近零膨胀性能的材料便成为解决这些问题的重要方法之一。在本研究中,作者通过改变烧结温度,制备出一系列介孔铁电PbTiO_(3)(PTO)陶瓷,通过测试结果展示了材料的热导率、热膨胀系数与烧结温度的关系。进一步通过三维重构技术(Tomography)与高角度环形暗场像(high angle annular dark field,HAADF),分析了改变烧结温度对于介孔尺寸、分布密度的影响,以及单个介孔表面附近的铁电屏蔽效应影响范围,从而解释了烧结温度的变化与介孔的分布密度、尺寸大小以及热膨胀行为之间的紧密联系。随着烧结温度的降低,介孔对材料铁电屏蔽效应的总区域占比逐渐升高,从而使材料正膨胀系数增大,导致材料表现出近零膨胀。为进一步提高材料的热导率,提升材料的多功能性,将这一材料与石墨烯进行复合,通过改变烧结温度与石墨烯的复合比例,进一步使材料的热膨胀系数趋近于零膨胀,并通过调整烧结温度与复合比例,得到膨胀系数低至7×10^(-7)℃^(-1),热导率比单相陶瓷提升约65%的近零膨胀复合陶瓷。这种材料可以在芯片封装,航天器外壳,通讯设备等材料领域得到进一步广泛应用的空间。
