Microstructure of nano precursors of La-Mg hydrogen storage alloy synthesized by sol-gel technology at different pH values

Sol-gel technology was employed to synthesize nanosized precursors of La-Mg hydrogen storage alloy at different pH values (0.5, 1.5, 8.0 and 9.0) of reaction solution. The effect of pH value on microstructure of the nano precursors of La-Mg hydrogen storage alloy was studied by infrared radiation (IR), thermo-gravimetric and differential thermal analysis (TG/DTA), X-ray diffraction analyzer (XRD) and transmission electron microscopy (TEM). IR results indicate that the chelating agent, citric acid, is not fully ionized, and carboxyl groups are not entirely used to complex metal ions in acidic solutions. The efficiency of complexing metal ions is enhanced in basic solutions. TG/DTA results show that the combustion may take place with low rate of the flame propagation that causes the longer combustion time when pH<1.5. On the contrary, the dry gel synthesized in basic solution combusts at low ignition temperature and combustion reaction is violent; it is easy to form fine particles. XRD and TEM results reveal that the precursor powders are mainly two-phase mixture of La 2 O 3 and MgO. The morphology of the particles is almost flake with the size of ~30 nm when pH is 8.0.

Research on Nanofabrication Technology of Micro-/Nano-Stereo Rapid Prototyping of PCVD

At present, the most common micro/nano-scale fabri ca tion processes include the plane silicon process based on IC technology, stereo silicon process, LIGA, quasi-LIGA based on near ultra violet deep lithography, MEMS, energy beam etching and micro/nano-machining, etc. A common problem for t hese processes is the difficulty to fabricate arbitrary form for 3-dimensional micro/nano-parts, devices or mechanisms. To develop advanced MEMS manufacturin g technology, and to achieve fabrication of true 3-dimensional parts, devices or mechanisms, this paper proposes a nanofabrication technology for rapid proto typing of 3-dimensional parts, using plasma chemical vapor deposition (PCVD). This process can be describes as follows: A laser beam is produced by a low power, quasi molecule laser. It enters the vac uum chamber through a window, and is focused on with the substrate surface. A ga s in the chamber is ionized by the laser beam to produce PCVD on the substrate s urface, and forms a particle of the size of Ф100 nm (its thickness is about 100 nm). When the laser beam moves along X-axis, many particles form a line. Then the laser beam moves one step in Y-axis to form a new line. A plane is complete d by many lines. Then the substrate moves in Z-axis to form new plane. Eventu ally, many planes form a 3-dimensional component. Using available CAD/CAM softw are with this process, rapid prototyping of complex components can be achieved. A nanometer precision linear motor, such as that described in Chinese national p atent (patent No. ZL 98 2 16753.9), can be used to obtain the nanometer precisio n movements in the process. The process does not require mask, can be used for v arious rapid prototyping materials, to obtain high fabrication precision (its sc ale precision is 15 nm), and larger ratio of height to width of micro/nano-stru cture. It can find widespread applications in the fabrication of micro-mechani sm, trimming IC, and fabricating minilens, etc.

On-Chip Micro Temperature Controllers Based on Freestanding Thermoelectric Nano Films for Low-Power Electronics

Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.

Active Micro-Nano-Collaborative Bioelectronic Device for Advanced Electrophysiological Recording

The development of precise and sensitive electrophysiological recording platforms holds the utmost importance for research in the fields of cardiology and neuroscience.In recent years,active micro/nano-bioelectronic devices have undergone significant advancements,thereby facilitating the study of electrophysiology.The distinctive configuration and exceptional functionality of these active micro-nano-collaborative bioelectronic devices offer the potential for the recording of high-fidelity action potential signals on a large scale.In this paper,we review three-dimensional active nano-transistors and planar active micro-transistors in terms of their applications in electroexcitable cells,focusing on the evaluation of the effects of active micro/nano-bioelectronic devices on electrophysiological signals.Looking forward to the possibilities,challenges,and wide prospects of active micro-nano-devices,we expect to advance their progress to satisfy the demands of theoretical investigations and medical implementations within the domains of cardiology and neuroscience research.

Ignition processes and characteristics of charring conductive polymers with a cavity geometry in precombustion chamber for applications in micro/nano satellite hybrid rocket motors

The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.However,charring polymers alone need a relatively high input voltage to achieve pyrolysis and ignition,which increases the burden and cost of the power system of micro/nano satellite in practical application.Adding conductive substance into charring polymers can effectively decrease the conducting voltage which can realize low voltage and low power consumption repeated ignition of arc ignition system.In this paper,a charring conductive polymer ignition grain with a cavity geometry in precombustion chamber,which is composed of PLA and multiwall carbon nanotubes(MWCNT)was proposed.The detailed ignition processes were analyzed and two different ignition mechanisms in the cavity of charring conductive polymers were revealed.The ignition characteristics of charring conductive polymers were also investigated at different input voltages,ignition grain structures,ignition locations and injection schemes in a visual ignition combustor.The results demonstrated that the ignition delay and external energy required for ignition were inversely correlated with the voltages applied to ignition grain.Moreover,the incremental depth of cavity shortened the ignition delay and external energy required for ignition while accelerated the propagation of flame.As the depth of cavity increased from 2 to 6 mm(at 50 V),the time of flame propagating out of ignition grain changed from 235.6 to 108 ms,and values of mean ignition delay time and mean external energy required for ignition decreased from 462.8 to 320 ms and 16.2 to 10.75 J,respectively.The rear side of the cavity was the ideal ignition position which had a shorter ignition delay and a faster flame propagation speed in comparison to other ignition positions.Compared to direct injection scheme,swirling injection provided a more favorable flow field environment in the cavity,which was beneficial to ignition and initial flame propagation,but the ignition position needed to be away from the outlet of swirling injector.At last,the repeated ignition characteristic of charring conductive polymers was also investigated.The ignition delay time and external energy required for ignition decreased with repeated ignition times but the variation was decreasing gradually.

Research on the process of fabricating a multi-layer metal micro-structure based on UV-LIGA overlay technology

In this paper,we report the study of the process of fabricating a multi-layermetal micro-structure using UV-LIGA overlay technology,includingmask fabrication,substrate treatment,and UV-LIGA overlay processes.To solve the process problems in the masking procedure,the swelling problemof the first layer of SU-8 thick photoresist was studied experimentally.The 5μmline-width compensation and closed 20μmand 30μmisolation strips were designed and fabricated around the micro-structure pattern.The pore problemin the Ni micro-electroforming layer was analyzed and the electroforming parameters were improved.The pH value of the electroforming solution should be controlled between 3.8 and 4.4 and the current density should be below 3 A/dm^2.To solve the problems of high inner stress and incomplete development of the micro-cylinder hole array with a diameter of 30μm,the lithography process was optimized.The pre-baking temperature was increased via gradient heating and rose every 5℃ from 65℃ to 85℃ and then remained at 85℃ for 50 min–1 h.In addition,the full contact exposure was used.Finally,a multi-layer metal micro-structure with high precision and good quality of microelectroforming layer was fabricated using UV-LIGA overlay technology.

Bibliometric analysis of micro-nano manufacturing technologies

Manufacturing is the primary industry promoting economic and social development.For the past 30 years,the global trends of preciseness and device miniaturisation have promoted manufacturing to the micro(μ)and nano(η)scale.Identification of themost promising micro-nano manufacturing technologies(MNMT)is of interest to industry,academia and private and national science investing foundations.Considering the exponential broadening of the research area and an enormous volume of literature,providing an overview of the state of the art is far beyond the scope of a technical review paper.This study performs bibliometric analysis of a stream of academic literature devoted toμ-andη-machining.Themain goals of the analysis are to assess the current core and trends in the field ofMNMT.Literature and citation statistics from 1988 were collected from theWeb of Science,Google Scholar,Scopus,Engineering Village,ScienceDirect and SpringerLink databases and were then analysed and illustrated with Microsoft Excel and VOSviewer software.The top keywords,articles,journals,authors,universities and countrieswere identified according to different parameters.The index of normalised influence was offered to evaluate the top element in each category.We observed that the most powerful keywords were present in well-known articles published in prominent journals by authoritative scientists at leading universities in the countries that are most actively engaged in MNMT.The implications of the research outcomes for investors and academicians are summarised in the conclusion.

Potential Applications of Nano-Scale Science and Technology in Geosciences and Experimental Studies of Nanometer-Sized Gold Adsorption on Minerals and Rocks

Potential applications of Nano-scale science and technology are discussed in mineralogy, ore deposits, cosmochemistry and environmental sciences. Adsorption of nanometersized gold was experimentally studied on a variety of minerals and rocks.

Impacts of Micro- and Nano-Plastics on Soil Properties and Plant Production in Agroecosystems: A Mini-Review

Micro- and nano-plastics (MNPs) are tiny plastic particles resulting from plastic product degradation. Soil MNPs have been identified as potential influential factors affecting various soil properties and crop biomass productivity. This mini-review provides a synthesis of recent findings concerning their effects on soil physicochemical properties, microorganisms, organic carbon content, soil nutrients, greenhouse gas emissions, soil fauna, and their impacts on plant ecophysiology, growth, and production. The results indicate that MNPs may markedly impede soil aggregation ability, increase porosity, decrease soil bulk density, enhance water retention capacity, influence soil pH and electrical conductivity, and escalate soil water evaporation. Exposure to MNPs may predominantly induce changes in soil microbial composition, reducing the diversity and complexity of microbial communities and microbial activity while enhancing soil organic carbon stability, influencing soil nutrient dynamics, and stimulating organic carbon decomposition and denitrification processes, leading to elevated soil respiration and methane emissions, and potentially decreasing soil nitrous oxide emission. Additionally, MNPs may adversely affect soil fauna, diminish seed germination rates, promote plant root growth, yet impair plant photosynthetic efficacy and biomass productivity. These findings contribute to a better understanding of the impacts and mechanistic foundations of MNPs. Future research avenues are suggested to further explore the impacts and economic implications.

Research and test of the adaptive quadrature demodulation technology for silicon micro-machined gyroscope

A program of adaptive quadrature demodulation is proposed to supply the gaps in the traditional analog detection technology of a silicon micro-machined gyroscope (SMG). This program is suitable for digital phase locked loop (DPLL) drive technology that proposed in other papers. In addition the program adopts an adaptive filtering algorithm, which selects the in-phase and quadrature components that are outputs of the DPLL of the SMG's drive mode as reference signals to update the amplitude of the in-phase and quadrature components of the input signal by iteratively. An objective of the program is to minimize the mean square error of the accurate amplitudes and the estimated amplitudes of SMG's detection mode. The simulation and test results prove the feasibility of the program that lays the foundation for the further improvement of the SMG's system performance and the implementation of the SMG system's self-calibration and self-demarcation in future.

Study of Multi-Function Micro-Plasma Spraying Technology

A multi-functional micro-arc plasma spraying system was developed according to aerodynamics and plasma spray theory. The soft switch IGBT （Insulated Gate Bipolar Transistor） invert technique, micro-computer control technique, convergent-divergent nozzle structure and axial powder feeding techniques have been adopted in the design of the micro-arc plasma spraying system. It is not only characterized by a small volume, a light weight, highly accurate control, high deposition efficiency and high reliability, but also has multi-functions in plasma spraying, welding and quenching. The experimental results showed that the system can produce a supersonic flame at a low power, spray Al2O3 particles at an average speed up to 430 m/s, and make nanostructured AT13 coatings with an average bonding strength of 42.7 MPa. Compared to conventional 9M plasma spraying with a higher power, the coatings with almost the same properties as those by conventional plasma spray can be deposited by multi-functional micro-arc plasma spraying with a lower power plasma arc due to an improved power supply design, spray gun structure and powder feeding method. Moreover, this system is suitable for working with thin parts and undertaking on site repairs, and as a result, the application of plasma spraying will be greatly extended.

The application of data mining technology in data service of micro service architecture

This paper introduces the application of data mining technology in data service. Data mining is a new technology, but its application time is long, and the application effect is obvious. Data mining technology can be used in enterprise customer service system, which can help enterprises to find potential customers, while retaining the most valuable customers. We pointed out the necessity of establishing data mining technology and service intelligence analysis system based on the combination of intelligence analysis and service characteristics and processes, the method of data mining, knowledge management ideas applied to intelligence analysis and service system.

Periodontal Diseases and Recently Applied Nano-Technology: A Review Article

Nowadays, nano-technology is a promising option for scientists to enhance dental conditions and provide new techniques to offer a more reliable and comfortable therapeutic pickups. In this regard, there are different methods to manufacture novel nano-structured dental materials, and also modern drug delivery techniques. In this review article, all our efforts are based on the recently nano-dental approaches closely linked to treat or prevent some common dental diseases including tooth erosion, tooth sensitivity, periodontal disease, oral cancer, and so on. All the data and articles putted in this survey are gathered from Google Scholar, PubMed, and some dental databases.

A Protocol to Develop Phenolic Emulsifiers Used in Micro-surface by Control Technology

The phenolic emulsifiers used in emulsified asphalt of micro-surfacing, which was the most important tools in the road maintenance, were investigated by control technology. Many factors influencing this reaction were studied and three kinds of phenolic emulsifiers were prepared without catalyst in ethanol. The performance was researched that 2-（{2-[2-（2-Amino-ethylamino）-ethylamino]-ethyl-amino}-methyl）-4- nonyl-phenol （abbreviated as TETA） could be used in micro-surface. With addition of 0.5 % demulsifier, the mixing time was extended to 120 seconds obviously, and the cohesion torque （60 min） was 2.8 N＊m, which satisfied the opening traffic time shorter than 1 h. The wet track abrasion （6 d） was lower than 807 g/m2, with interracial modifier added, but the load wheel was increased with interfacial modifier increasing. When the TETA： demulsifier： interracial modifier =3：1：3, excellent performance was obtained and the experimental results met the International Slurry Surfacing Association （ISSA） standard. The synthesis process of this emulsifier is simple and the performance used in micro-surface was excellent, so this kind of emulsifier could have a better application future.

Design a Collector with More Reliability against Defects during Manufacturing in Nanometer Technology, QCA

Nowadays Quantum Cellular Automata (QCA) as the leading technology in design of microelectronic systems has been raised. With respect to high velocity and density in low power and also simple concepts, this technology is a viable alternative to CMOS technology. In collector design, the primary component of each processor is very important. Due to the small elements in this technology, failure rate in manufacturing process technology is very high. In the other hand, the simulation shows that the intersection point of two wires is one of the critical points in QCA circuits. This means that defects in the manufacturing process around these points can cause malfunction in the circuit performance. In this paper, a collector in cross sections of wire in his new method used higher reliability against defects during manufacturing has been developed. QCA Designer software is used to simulate the case study system.

Application of Green Technology Using Biological Means for the Adsorption of Micro-Pollutants in Water

It is true that the world we have today is not the world we use to know. The Covid-19 pandemic has paralyzed all sector, hence the need for safety and enabling environment for mankind is of high importance. Adsorption technology is far the best and cheapest treatment technology for water and has extensively proven its worth for the uptake of micro-pollutant from surface, ground and water which are the major channels of home water. Over the years activated carbon is considered as the most common and universally used adsorbent for the eradication of different types of micro-pollutants from water. The contamination of surface water by micro-pollutant is a potential threat for the production of high quality and safe drinking water. Adsorption operation onto granulated activated carbon (GAC) in fixed-bed filters is often applied as a remedying step in the synthesis of safe and drinkable water. Activated carbon actively tends to act as a carrier material for a thin usually resistant layer of microorganisms (mostly bacteria) that forms on the coat of various surfaces (biofilm), hence biological simplification can be an alternative removal approach that can be adopted in granulated activated carbon filters. To evaluate the capacity of biofilm to biologically simplify micro-pollutants, it is very imperative to distinguish adsorption from biological simplification (biodegradation) as a removal mechanism. Experiment was carried out under the operating condition of a temperature range of 6?C to 20?C with biologically activated and autoclaved GAC to assess the biological simplification by the biofilm adsorbed on the GAC surface. Five micro-pollutants were selected as model compounds, of which some of them were biologically simplified by the GAC biofilm. Additionally, we observed that temperature can increase or decrease adsorption. Conclusively, comparison was made on the adsorption capacity of granulated activated carbon used for more than 50,000 beds.

Recent development of LiNi_xCo_yMn_zO_2:Impact of micro/nano structures for imparting improvements in lithium batteries

The recent advancement in the design,synthesis,and fabrication of micro/nano structured LiNixCoyMnzO2 with one-,two-,and three-dimensional morphologies was reviewed.The major goal is to highlight LiNixCoyMnzO2 materials,which have been utilized in lithium ion batteries with enhanced energy and power density,high energy efficiency,superior rate capability and excellent cycling stability resulting from the doping,surface coating,nanocomposites and nano-architecturing.

Synthesis of porous nano/micro structured LiFePO_4/C cathode materials for lithium-ion batteries by spray-drying method

In order to enhance electrochemical properties of LiFePO4 （LFP） cathode materials, spherical porous nano/micro structured LFP/C cathode materials were synthesized by spray drying, followed by calcination. The results show that the spherical precursors with the sizes of 0.5-5 μm can be completely converted to LFP/C when the calcination temperature is higher than 500 ℃. The LFP/C microspheres obtained at calcination temperature of 700 ℃ are composed of numerous particles with sizes of -20 nm, and have well-developed interconnected pore structure and large specific surface area of 28.77 mE/g. The specific discharge capacities of the LFP/C obtained at 700 ℃ are 162.43, 154.35 and 144.03 mA.h/g at 0.5C, 1C and 2C, respectively. Meanwhile, the capacity retentions can reach up to 100% after 50 cycles. The improved electrochemical properties of the materials are ascribed to a small Li＋ diffusion resistance and special structure of LFP/C microspheres.