Quantum light sources are the core resources for photonics-based quantum information processing.We investigate the spectral engineering of photon triplets generated by third-order spontaneous parametric down-conversio...Quantum light sources are the core resources for photonics-based quantum information processing.We investigate the spectral engineering of photon triplets generated by third-order spontaneous parametric down-conversion in micro/nanofiber.The phase mismatching at one-third pump frequency gives rise to non-degenerate photon triplets,the joint spectral intensity of which has an elliptical locus with a fixed eccentricity of√6/3.Therefore,we propose a frequency-division scheme to separate non-degenerate photon triplets into three channels with high heralding efficiency for the first time.Choosing an appropriate pump wavelength can compensate for the fabrication errors of micro/nanofiber and also generate narrowband,non-degenerate photon triplet sources with a high signal-to-noise ratio.Furthermore,the long-period micro/nanofiber grating introduces a new controllable degree of freedom to tailor phase matching,resulting from the periodic oscillation of dispersion.In this scheme,the wavelength of photon triplets can be flexibly tuned using quasi-phase matching.We study the generation of photon triplets from this novel perspective of spectrum engineering,and we believe that this work will accelerate the practical implementation of photon triplets in quantum information processing.展开更多
Sn_(1−x)Er_(x)O_(2)(x=0%,8%,16%,24%)micro/nanofibers were prepared by electrospinning combined with heat treatment using erbium nitrate,stannous chloride and polyvinylpyrrolidone(PVP)as raw materials.The target produc...Sn_(1−x)Er_(x)O_(2)(x=0%,8%,16%,24%)micro/nanofibers were prepared by electrospinning combined with heat treatment using erbium nitrate,stannous chloride and polyvinylpyrrolidone(PVP)as raw materials.The target products were characterized by thermogravimetric analyzer,X-ray diffrotometer,fourier transform infrared spectrometer,scanning electron microscope,spectrophotometer and infrared emissivity tester,and the effects of Er^(3+)doping on its infrared and laser emissivity were studied.At the same time,the Sn_(1−x)Er_(x)O_(2)(x=0%,16%)doping models were constructed based on the first principles of density functional theory,and the related optoelectronic properties such as their energy band structure,density of states,reflectivity and dielectric constant were analyzed,and further explained the mechanism of Er^(3+)doping on SnO_(2)infrared emissivity and laser absorption from the point of electronic structure.The results showed that after calcination at 600℃,single rutile type SnO_(2)was formed,and the crystal structure was not changed by doping Er^(3+).The calcined products showed good fiber morphology,and the average fiber diameter was 402 nm.The infrared emissivity and resistivity of the samples both decreased first and then increased with the increase of Er^(3+)doping amount.When x=16%,the infrared emis-sivity of the sample was at least 0.71;and Er^(3+)doping can effectively reduce the reflectivity of SnO_(2)at 1.06μm and 1.55μm,when x=16%,its reflectivity at 1.06μm and 1.55μm are 50.5%and 40%,respectively,when x=24%,the reflectivity at 1.06μm and 1.55μm wavelengths are 47.3%and 42.1%,respectively.At the same time,the change of carrier concentration and electron transition before and after Er^(3+)doping were described by first-principle calculation,and the regulation mechanism of infrared emissivity and laser reflectivity was explained.This study provides a certain experimental and theoretical basis for the development of a single-type,light-weight and easily prepared infrared and laser compatible-stealth material.展开更多
Flexible strain sensors play an important role in electronic skins,wearable medical devices,and advanced robots.Herein,a highly sensitive and fast response optical strain sensor with two evanescently coupled optical m...Flexible strain sensors play an important role in electronic skins,wearable medical devices,and advanced robots.Herein,a highly sensitive and fast response optical strain sensor with two evanescently coupled optical micro/nanofibers(MNFs)embedded in a polydimethylsiloxane(PDMS)film is proposed.The strain sensor exhibits a gauge factor as high as 64.5 for strain≤0.5%and a strain resolution of 0.0012%which corresponds to elongation of 120 nm on a 1 cm long device.As a proof-of-concept,highly sensitive fingertip pulse measurement is realized.The properties of fast temporal frequency response up to 30 kHz and a pressure sensitivity of 102 kPa^(−1) enable the sensor for sound detection.Such versatile sensor could be of great use in physiological signal monitoring,voice recognition and micro-displacement detection.展开更多
Electronic skin,a class of wearable electronic sensors that mimic the functionalities of human skin,has made remarkable success in applications including health monitoring,human-machine interaction and electronic-biol...Electronic skin,a class of wearable electronic sensors that mimic the functionalities of human skin,has made remarkable success in applications including health monitoring,human-machine interaction and electronic-biological interfaces.While electronic skin continues to achieve higher sensitivity and faster response,its ultimate performance is fundamentally limited by the nature of low-frequency AC currents.Herein,highly sensitive skin-like wearable optical sensors are demonstrated by embedding glass micro/nanofibers(MNFs)in thin layers of polydimethylsiloxane(PDMS).Enabled by the transition from guided modes into radiation modes of the waveguiding MNFs upon external stimuli,the skin-like optical sensors show ultrahigh sensitivity(1870 k·Pa^-1),low detection limit(7 mPa)and fast response(10μs)for pressure sensing,significantly exceeding the performance metrics of state-of-the-art electronic skins.Electromagnetic interference(EMI)-free detection of high-frequency vibrations,wrist pulse and human voice are realized.Moreover,a five-sensor optical data glove and a 2×2-MNF tactile sensor are demonstrated.These initial results pave the way toward a new category of optical devices ranging from ultrasensitive wearable sensors to optical skins.展开更多
Electrospinning is a versatile and popular method for the fabrication of ultrafine fibers and many parameters in electrospinning can be adjusted when ideal micro/nanofibers are required.In particular,the selection of ...Electrospinning is a versatile and popular method for the fabrication of ultrafine fibers and many parameters in electrospinning can be adjusted when ideal micro/nanofibers are required.In particular,the selection of a proper solvent condition is a fundamental and crucial step to produce electrospun ultrafine fibers.In this study,a commonly used biomaterial,polylactic acid(PLA),was dissolved in 7 different solvents and PLA micro/nanofibers were prepared by electrospinning.The morphology,porosity,mechanical property and static contact angle were characterized to determine the quality of the obtained product.The results show that different solvent conditions have a significant effect on both the diameter,surface smooth degree of PLA micro/nanofibers and the properties of the fibrous membranes.展开更多
Upregulation of vascular endothelial growth factor A/basic fibroblast growth factor(VEGFA/b FGF)expression in the penumbra of cerebral ischemia can increase vascular volume,reduce lesion volume,and enhance neural cell...Upregulation of vascular endothelial growth factor A/basic fibroblast growth factor(VEGFA/b FGF)expression in the penumbra of cerebral ischemia can increase vascular volume,reduce lesion volume,and enhance neural cell proliferation and differentiation,thereby exerting neuroprotective effects.However,the beneficial effects of endogenous VEGFA/b FGF are limited as their expression is only transiently increased.In this study,we generated multilayered nanofiber membranes loaded with VEGFA/b FGF using layer-by-layer self-assembly and electrospinning techniques.We found that a membrane containing 10 layers had an ideal ultrastructure and could efficiently and stably release growth factors for more than 1 month.This 10-layered nanofiber membrane promoted brain microvascular endothelial cell tube formation and proliferation,inhibited neuronal apoptosis,upregulated the expression of tight junction proteins,and improved the viability of various cellular components of neurovascular units under conditions of oxygen/glucose deprivation.Furthermore,this nanofiber membrane decreased the expression of Janus kinase-2/signal transducer and activator of transcription-3(JAK2/STAT3),Bax/Bcl-2,and cleaved caspase-3.Therefore,this nanofiber membrane exhibits a neuroprotective effect on oxygen/glucose-deprived neurovascular units by inhibiting the JAK2/STAT3 pathway.展开更多
Application of novel radio technologies and equip-ment inevitably leads to electromagnetic pollution.One-dimensional polymer-based composite membrane structures have been shown to be an effective strategy to obtain hi...Application of novel radio technologies and equip-ment inevitably leads to electromagnetic pollution.One-dimensional polymer-based composite membrane structures have been shown to be an effective strategy to obtain high-performance microwave absorbers.Herein,we reported a one-dimensional N-doped carbon nanofibers material which encapsulated the hollow Co_(3)SnC_(0.7) nano-cubes in the fiber lumen by electrospinning.Space charge stacking formed between nanoparticles can be channeled by longitudinal fibrous structures.The dielectric constant of the fibers is highly related to the carbonization temperature,and the great impedance matching can be achieved by synergetic effect between Co_(3)SnC_(0.7) and carbon network.At 800℃,the necklace-like Co_(3)SnC_(0.7)/CNF with 5%low load achieves an excellent RL value of−51.2 dB at 2.3 mm and the effective absorption bandwidth of 7.44 GHz with matching thickness of 2.5 mm.The multiple electromagnetic wave(EMW)reflections and interfacial polarization between the fibers and the fibers internal contribute a major effect to attenuating the EMW.These strategies for regulating electromagnetic performance can be expanded to other electromagnetic functional materials which facilitate the development of emerging absorbers.展开更多
Exploration of advanced gel polymer electrolytes(GPEs)represents a viable strategy for mitigating dendritic lithium(Li)growth,which is crucial in ensuring the safe operation of high energy density Li metal batteries(L...Exploration of advanced gel polymer electrolytes(GPEs)represents a viable strategy for mitigating dendritic lithium(Li)growth,which is crucial in ensuring the safe operation of high energy density Li metal batteries(LMBs).Despite this,the application of GPEs is still hindered by inadequate ionic conductivity,low Li^(+)transference number,and subpar physicochemical properties.Herein,Ti O_(2-x)nanofibers(NF)with oxygen vacancy defects were synthesized by a one-step process as inorganic fillers to enhance the thermal/mechanical/ionic-transportation performances of composite GPEs.Various characterizations and theoretical calculations reveal that the oxygen vacancies on the surface of Ti O_(2-x)NF accelerate the dissociation of Li PF_6,promote the rapid transfer of free Li^(+),and influence the formation of Li F-enriched solid electrolyte interphase.Consequently,the composite GPEs demonstrate enhanced ionic conductivity(1.90m S cm^(-1)at room temperature),higher lithium-ion transference number(0.70),wider electrochemical stability window(5.50 V),superior mechanical strength,excellent thermal stability(210℃),and improved compatibility with lithium,resulting in superior cycling stability and rate performance in both Li||Li,Li||Li Fe PO_(4),and Li||Li Ni_(0.8)Co_(0.1)Mn_(0.1)O_(2)cells.Overall,the synergistic influence of nanofiber morphology and enriched oxygen vacancy structure of fillers on electrochemical properties of composite GPEs is comprehensively investigated,thus,it is anticipated to shed new light on designing high-performance GPEs LMBs.展开更多
This work presents the development of hierarchical niobium pentoxide(Nb_(2)O_(5))-based composite nanofiber membranes for integrated adsorption and photocatalytic degradation of methylene blue(MB)pollutants from aqueo...This work presents the development of hierarchical niobium pentoxide(Nb_(2)O_(5))-based composite nanofiber membranes for integrated adsorption and photocatalytic degradation of methylene blue(MB)pollutants from aqueous solutions.The Nb_(2)O_(5) nanorods were vertically grown using a hydrothermal process on a base electrospun nanofibrous membrane made of polyacrylonitrile/polyvinylidene fluoride/ammonium niobate(V)oxalate hydrate(Nb_(2)O_(5)@PAN/PVDF/ANO).They were characterized using field-emission scanning electron microscopy(FE-SEM),X-ray diffraction(XRD)analysis,and Fourier transform infrared(FTIR)spectroscopy.These composite nanofibers possessed a narrow optical bandgap energy of 3.31 eV and demonstrated an MB degradation efficiency of 96%after 480 min contact time.The pseudo-first-order kinetic study was also conducted,in which Nb_(2)O_(5)@PAN/PVDF/ANO nanofibers have kinetic constant values of 1.29×10^(-2) min^(-1) and 0.30×10^(-2) min^(-1) for adsorption and photocatalytic degradation of MB aqueous solutions,respectively.These values are 17.7 and 7.8 times greater than those of PAN/PVDF/ANO nanofibers without Nb_(2)O_(5) nanostructures.Besides their outstanding photocatalytic performance,the developed membrane materials exhibit advantageous characteristics in recycling,which subsequently widen their practical use in environmental remediation applications.展开更多
The unique characteristics of nanofibers in rational electrode design enable effec-tive utilization and maximizing material properties for achieving highly efficient and sustainable CO_(2) reduction reactions( CO_(2)R...The unique characteristics of nanofibers in rational electrode design enable effec-tive utilization and maximizing material properties for achieving highly efficient and sustainable CO_(2) reduction reactions( CO_(2)RRs)in solid oxide elec-trolysis cells(SOECs).However,practical appli-cation of nanofiber-based electrodes faces chal-lenges in establishing sufficient interfacial contact and adhesion with the dense electrolyte.To tackle this challenge,a novel hybrid nanofiber electrode,La_(0.6)Sr_(0.4)Co_(0.15)Fe_(0.8)Pd_(0.05)O_(3-δ)(H-LSCFP),is developed by strategically incorporating low aspect ratio crushed LSCFP nanofibers into the excess porous interspace of a high aspect ratio LSCFP nanofiber framework synthesized via electrospinning technique.After consecutive treatment in 100% H_(2) and CO_(2) at 700°C,LSCFP nanofibers form a perovskite phase with in situ exsolved Co metal nanocatalysts and a high concentration of oxygen species on the surface,enhancing CO_(2) adsorption.The SOEC with the H-LSCFP electrode yielded an outstanding current density of 2.2 A cm^(-2) in CO_(2) at 800°C and 1.5 V,setting a new benchmark among reported nanofiber-based electrodes.Digital twinning of the H-LSCFP reveals improved contact adhesion and increased reaction sites for CO_(2)RR.The present work demonstrates a highly catalytically active and robust nanofiber-based fuel electrode with a hybrid structure,paving the way for further advancements and nanofiber applications in CO_(2)-SOECs.展开更多
Highly ordered and uniformly porous structure of conductive foams is a vital issue for various functional purposes such as piezoresistive sensing and electromagnetic interference(EMI) shielding. With the aids of Kevla...Highly ordered and uniformly porous structure of conductive foams is a vital issue for various functional purposes such as piezoresistive sensing and electromagnetic interference(EMI) shielding. With the aids of Kevlar polyanionic chains, thermoplastic polyurethane(TPU) foams reinforced by aramid nanofibers(ANF) with adjustable pore-size distribution were successfully obtained via a nonsolvent-induced phase separation. In this regard, the most outstanding result is the in situ formation of ANF in TPU foams after protonation of Kevlar polyanion during the NIPS process. Furthermore, in situ growth of copper nanoparticles(Cu NPs) on TPU/ANF foams was performed according to the electroless deposition by using the tiny amount of pre-blended Ti_(3)C_(2)T_(x) MXene as reducing agents. Particularly, the existence of Cu NPs layers significantly promoted the storage modulus in 2,932% increments, and the well-designed TPU/ANF/Ti_(3)C_(2)T_(x) MXene(PAM-Cu) composite foams showed distinguished compressive cycle stability. Taking virtues of the highly ordered and elastic porous architectures, the PAM-Cu foams were utilized as piezoresistive sensor exhibiting board compressive interval of 0–344.5 kPa(50% strain) with good sensitivity at 0.46 kPa^(-1). Meanwhile,the PAM-Cu foams displayed remarkable EMI shielding effectiveness at 79.09 dB in X band. This work provides an ideal strategy to fabricate highly ordered TPU foams with outstanding elastic recovery and excellent EMI shielding performance, which can be used as a promising candidate in integration of satisfactory piezoresistive sensor and EMI shielding applications for human–machine interfaces.展开更多
Hydrogen sulfide(H_(2)S)is an industrial exhausted gas that is highly toxic to humans and the environment.Combining desulfurization and fabrication of cathode materials for lithium-sulfur batteries(LSBs)can solve this...Hydrogen sulfide(H_(2)S)is an industrial exhausted gas that is highly toxic to humans and the environment.Combining desulfurization and fabrication of cathode materials for lithium-sulfur batteries(LSBs)can solve this issue with a double benefit.Herein,the amino-functionalized lotus root-like carbon nanofibers(NH_(2)-PLCNFs)are prepared by the amination of electrospinning carbon nanofibers under dielectric barrier discharge plasma.Selective catalytic oxidation of H_(2)S to elemental sulfur(S)is achieved over the metalfree NH_(2)-PLCNFs catalyst,and the obtained composite S@NH_(2)-PLCNFs is further used as cathode in LSBs.NH_(2)-PLCNFs enable efficient desulfurization(removal capacity as high as 3.46 g H_(2)S g^(−1) catalyst)and strongly covalent stabilization of S on modified carbon nanofibers.LSBs equipped with S@NH_(2)-PLCNFs deliver a high specific capacity of 705.8 mA h g^(−1) at 1 C after 1000 cycles based on the spatial confinement and the covalent stabilization of electroactive materials on amino-functionalized porous carbon matrix.It is revealed that S@NH_(2)-PLCNFs obtained by this kind of chemical vapor deposition leads to a more homogeneous S distribution and superior electrochemical performance to the sample S/NH_(2)-PLCNF-M prepared by the traditional molten infusion.This work opens a new avenue for the combination of environment protection and energy storage.展开更多
The rational synergy of chemical composition and spatial nanostructures of electrode materials play important roles in high-performance energy storage devices.Here,we designed pea-like MoS_(2)@NiS_(1.03)-carbon hollow...The rational synergy of chemical composition and spatial nanostructures of electrode materials play important roles in high-performance energy storage devices.Here,we designed pea-like MoS_(2)@NiS_(1.03)-carbon hollow nanofibers using a simple electrospinning and thermal treatment method.The hierarchical hollow nanofiber is composed of a nitrogen-doped carbon-coated NiS_(1.03) tube wall,in which pea-like uniformly discrete MoS_(2) nanoparticles are enclosed.As a sodium-ion battery electrode material,the MoS_(2)@NiS_(1.03)-carbon hollow nanofibers have abundant diphasic heterointerfaces,a conductive network,and appropriate volume variation-buffering spaces,which can facilitate ion diffusion kinetics,shorten the diffusion path of electrons/ion,and buffer volume expansion during Na^(+)insertion/extraction.It shows outstanding rate capacity and long-cycle performance in a sodium-ion battery.This heterogeneous hollow nanoarchitectures designing enlightens an efficacious strategy to boost the capacity and long-life stability of sodium storage performance of electrode materials.展开更多
An efficient chamber-induced activation method was applied for the preparation of holey graphene/cellulose nanofiber-based film with high specific surface area(SSA)and multiple channels through the graphene nanosheets...An efficient chamber-induced activation method was applied for the preparation of holey graphene/cellulose nanofiber-based film with high specific surface area(SSA)and multiple channels through the graphene nanosheets.With the cellulose nanofiber(CNF)simultaneously serving as“dispersing agent,”“spacer,”and“activating agent,”the graphene oxide(GO)nanosheets are perforated by the pyrolysis gas from CNF in the confined space inside the hybrid films,uniformly dispersed,and sandwiched between CNF networks with less agglomeration and restacking.Additionally,we have proved that H2O and H2 are primarily responsible for the activation and etching of GO/CNF film.As the CNF content increases,the mesoporosity of the activated reduced GO/CNF(A-RGO/CNF)film increases,and the graphene nanosheets show more nanopore perforations.Benefitting from the high SSA,high density,moderate mesoporosity,and abundant channels for ion diffusion through the graphene nanosheets,the A-RGO/CNF film exhibits the highest specific capacitance of 323(236)F g^(−1)(F cm^(−3))at 1Ag^(−1).For the A-RGO5/CNF5 film containing half CNF and half GO,an excellent comprehensive electrochemical performance including superior rate performance(208(160)F g^(−1)(F cm^(−3))at 60Ag^(−1))is exhibited.Moreover,the A-RGO5/CNF5 electrode in an all-solid-state flexible symmetric supercapacitor delivers a high specific capacitance of 250(193)F g^(−1)(F cm^(−3))at 1Ag^(−1).This study provides a novel idea for the preparation of holey graphene-based film for supercapacitor electrodes.The strategy of simultaneously employing CNF as“dispersing agent,”“spacer,”and“activating agent”also offers a new vision for the assembly of homogeneous nanohybrid material and the utilization of pyrolysis gas.展开更多
One of the major problems limiting the applications of electric double-layer(EDLC)supercapacitor devices is their inability to maintain their cell voltage over a significant period.Self-discharge is a spontaneous deca...One of the major problems limiting the applications of electric double-layer(EDLC)supercapacitor devices is their inability to maintain their cell voltage over a significant period.Self-discharge is a spontaneous decay in charged energy,often resulting in fully depleted devices in a matter of hours.Here,a new method for suppressing this self-discharge phenomenon is proposed by using directionally polarized piezoelectric electrospun nanofiber films as separator materials.Tailored engineering of polyvinylidene fluoride(PVDF)nanofiber films containing a small concentration of sodium dodecyl sulfate(SDS)results in a high proportion of polarβphases,reaching 380.5%of the total material.Inducing polarity into the separator material provides a reverse-diode mechanism in the device,such that it drops from an initial voltage of 1.6 down to 1 V after 10 h,as opposed to 0.3 V with a nonpolarized,commercial separator material.Thus,the energy retained for the polarized separator is 37%and 4%for the nonpolarized separator,making supercapacitors a more attractive solution for long-term energy storage.展开更多
Flexible and stretchable transparent electrodes are widely used in smart display,energy,wearable devices and other fields.Due to the limitations of flexibility and stretchability of indium tin oxide electrodes,alterna...Flexible and stretchable transparent electrodes are widely used in smart display,energy,wearable devices and other fields.Due to the limitations of flexibility and stretchability of indium tin oxide electrodes,alternative electrodes have appeared,such as metal films,metal nanowires,and conductive meshes.However,few of the above electrodes can simultaneously have excellent flexibility,stretchability,and optoelectronic properties.Nanofiber(NF),a continuous ultra-long one-dimensional conductive material,is considered to be one of the ideal materials for high-performance transparent electrodes with excellent properties due to its unique structure.This paper summarizes the important research progress of NF flexible transparent electrodes(FTEs)in recent years from the aspects of NF electrode materials,preparation technology and application.First,the unique advantages and limitations of various NF materials are systematically discussed.Then,we summarize the preparation technology of various advanced NF FTEs,and point out the future development trend.We also discuss the application of NFs in solar cells,supercapacitors,electric heating equipments,sensors,etc,and analyze its development potential in flexible electronic equipment,as well as problems that need to be solved.Finally,the challenges and future development trends are proposed in the wide application of NF FTEs in the field of flexible optoelectronics.展开更多
OER catalyst of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C(NiFeSC series)mixed crystal composite nanofibers was prepared by electrospinning and atmospheric heat treatment process.The testing results indicate that the diameters of Ni_(...OER catalyst of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C(NiFeSC series)mixed crystal composite nanofibers was prepared by electrospinning and atmospheric heat treatment process.The testing results indicate that the diameters of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C composite nanofibers is about 200 nm,the grains size is about 1-3 nm,and the fiber surface is rough.The electrochemical test results show that the heterojunction of the prepared Ni_(3)Fe/Ni_(4)S_(3)/Ni/C hybrid crystal composite nanofiber has synergistic effect with sulfide,and exhibits good electrocatalytic activity of water decomposition and OER in alkaline system.The OER electrocatalytic performance of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C composite electrode prepared via a heat treatment at 1000℃process was tested in 1 mol/L KOH electrolytes.The results show that the overpotential is about 298 mV,the Tafel slope is about 74 mV?dec-1,and the surface resistance is about 1.69Ω·cm^(2),at the current density of 10 mA·cm^(-2).展开更多
A high performance preoxidized poly(acrylonitrile)(O-PAN)nanofiber membrane with excellent solvent resistance,thermal stability and flexibility was fabricated by the preoxidation of electrospun PAN nanofiber membrane....A high performance preoxidized poly(acrylonitrile)(O-PAN)nanofiber membrane with excellent solvent resistance,thermal stability and flexibility was fabricated by the preoxidation of electrospun PAN nanofiber membrane.The performance of resultant O-PAN nanofiber membrane was optimized by altering the PAN concentration and preoxidation temperature.The results showed that the O-PAN nanofiber membrane which made from PAN concentration of 14%(mass)and preoxidation temperature of 250.0℃ have a more optimal comprehensive performance.In the long-term separation test of SiO2 particle(1 μm)in DMAc suspension,the permeate flux of O-PAN nanofiber membrane stabilized at 227.91 L·m^(-2)·h^(-1)(25℃,0.05 MPa)while the SiO2 rejection above 99.6%,which showed excellent solvent resistance and separation performance.In order to further explore the application of the O-PAN nanofiber membrane,the OPAN nanofiber membrane was treated with fluoride and used in oil/water separation process.The O-PAN nanofiber membrane after hydrophobic treatment showed excellent hydrophobicity and good oil/water separation performance with the permeate flux about 969.59 L·m^(-2)·h^(-1)while the separation efficiency above 96.1%.The O-PAN nanofiber membrane exhibited a potential application prospect in harsh environment separation.展开更多
Carbon nanofiber(CNF)was widely utilized in the field of electrochemical energy storage due to its superiority of conductivity and mechanics.However,CNF was generally prepared at relatively high temperature.Herein,nit...Carbon nanofiber(CNF)was widely utilized in the field of electrochemical energy storage due to its superiority of conductivity and mechanics.However,CNF was generally prepared at relatively high temperature.Herein,nitrogen-doped hard carbon nanofibers(NHCNFs)were prepared by a lowtemperature carbonization treatment assisted with electrospinning technology.Density functional theory analysis elucidates the incorporation of nitrogen heteroatoms with various chemical states into carbon matrix would significantly alter the total electronic configurations,leading to the robust adsorption and efficient diffusion of Na atoms on electrode interface.The obtained material carbonized at 600°C(NHCNF-600)presented a reversible specific capacity of 191.0 mAh g^(−1)and no capacity decay after 200 cycles at 1 A g^(−1).It was found that the sodium-intercalated degree had a correlation with the electrochemical impedance.A sodium-intercalated potential of 0.2 V was adopted to lower the electrochemical impedance.The constructed sodium-ion capacitor with activated carbon cathode and presodiated NHCNF-600 anode can present an energy power density of 82.1 Wh kg^(−1)and a power density of 7.0 kW kg^(−1).展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.61605249)the Science and Technology Key Project of Henan Province of China(Grant Nos.182102210577 and 232102211086).
文摘Quantum light sources are the core resources for photonics-based quantum information processing.We investigate the spectral engineering of photon triplets generated by third-order spontaneous parametric down-conversion in micro/nanofiber.The phase mismatching at one-third pump frequency gives rise to non-degenerate photon triplets,the joint spectral intensity of which has an elliptical locus with a fixed eccentricity of√6/3.Therefore,we propose a frequency-division scheme to separate non-degenerate photon triplets into three channels with high heralding efficiency for the first time.Choosing an appropriate pump wavelength can compensate for the fabrication errors of micro/nanofiber and also generate narrowband,non-degenerate photon triplet sources with a high signal-to-noise ratio.Furthermore,the long-period micro/nanofiber grating introduces a new controllable degree of freedom to tailor phase matching,resulting from the periodic oscillation of dispersion.In this scheme,the wavelength of photon triplets can be flexibly tuned using quasi-phase matching.We study the generation of photon triplets from this novel perspective of spectrum engineering,and we believe that this work will accelerate the practical implementation of photon triplets in quantum information processing.
基金supported by the Key Research and Development Program of Hebei Province(No.21351501D)A Provincial and Ministerial Scientific Research Project(LJ20212C031165)Basic Frontier Science and Technology Innovation Project of Army Engineering University of PLA(KYSZJQZL2210)。
文摘Sn_(1−x)Er_(x)O_(2)(x=0%,8%,16%,24%)micro/nanofibers were prepared by electrospinning combined with heat treatment using erbium nitrate,stannous chloride and polyvinylpyrrolidone(PVP)as raw materials.The target products were characterized by thermogravimetric analyzer,X-ray diffrotometer,fourier transform infrared spectrometer,scanning electron microscope,spectrophotometer and infrared emissivity tester,and the effects of Er^(3+)doping on its infrared and laser emissivity were studied.At the same time,the Sn_(1−x)Er_(x)O_(2)(x=0%,16%)doping models were constructed based on the first principles of density functional theory,and the related optoelectronic properties such as their energy band structure,density of states,reflectivity and dielectric constant were analyzed,and further explained the mechanism of Er^(3+)doping on SnO_(2)infrared emissivity and laser absorption from the point of electronic structure.The results showed that after calcination at 600℃,single rutile type SnO_(2)was formed,and the crystal structure was not changed by doping Er^(3+).The calcined products showed good fiber morphology,and the average fiber diameter was 402 nm.The infrared emissivity and resistivity of the samples both decreased first and then increased with the increase of Er^(3+)doping amount.When x=16%,the infrared emis-sivity of the sample was at least 0.71;and Er^(3+)doping can effectively reduce the reflectivity of SnO_(2)at 1.06μm and 1.55μm,when x=16%,its reflectivity at 1.06μm and 1.55μm are 50.5%and 40%,respectively,when x=24%,the reflectivity at 1.06μm and 1.55μm wavelengths are 47.3%and 42.1%,respectively.At the same time,the change of carrier concentration and electron transition before and after Er^(3+)doping were described by first-principle calculation,and the regulation mechanism of infrared emissivity and laser reflectivity was explained.This study provides a certain experimental and theoretical basis for the development of a single-type,light-weight and easily prepared infrared and laser compatible-stealth material.
基金We are grateful for financial supports from the National Natural Science Foundation of China(No.61975173)the National Key Research and Development Program of China(No.SQ2019YFC170311)+3 种基金the Major Scientific Research Project of Zhejiang Lab(No.2019MC0AD01)the Key Research and Development Project of Zhejiang Province(No.2021C05003)the Quantum Joint Funds of the Natural Foundation of Shandong Province(No.ZR2020LLZ007)the CIE-Tencent Robotics X Rhino-Bird Focused Research Program(No.2020-01-006).
文摘Flexible strain sensors play an important role in electronic skins,wearable medical devices,and advanced robots.Herein,a highly sensitive and fast response optical strain sensor with two evanescently coupled optical micro/nanofibers(MNFs)embedded in a polydimethylsiloxane(PDMS)film is proposed.The strain sensor exhibits a gauge factor as high as 64.5 for strain≤0.5%and a strain resolution of 0.0012%which corresponds to elongation of 120 nm on a 1 cm long device.As a proof-of-concept,highly sensitive fingertip pulse measurement is realized.The properties of fast temporal frequency response up to 30 kHz and a pressure sensitivity of 102 kPa^(−1) enable the sensor for sound detection.Such versatile sensor could be of great use in physiological signal monitoring,voice recognition and micro-displacement detection.
基金This work was supported by the National Key Research and Development Program of China(2016YFB1001300)the National Natural Science Foundation of China(No.11527901)the Fundamental Research Funds for the Central Universities.
文摘Electronic skin,a class of wearable electronic sensors that mimic the functionalities of human skin,has made remarkable success in applications including health monitoring,human-machine interaction and electronic-biological interfaces.While electronic skin continues to achieve higher sensitivity and faster response,its ultimate performance is fundamentally limited by the nature of low-frequency AC currents.Herein,highly sensitive skin-like wearable optical sensors are demonstrated by embedding glass micro/nanofibers(MNFs)in thin layers of polydimethylsiloxane(PDMS).Enabled by the transition from guided modes into radiation modes of the waveguiding MNFs upon external stimuli,the skin-like optical sensors show ultrahigh sensitivity(1870 k·Pa^-1),low detection limit(7 mPa)and fast response(10μs)for pressure sensing,significantly exceeding the performance metrics of state-of-the-art electronic skins.Electromagnetic interference(EMI)-free detection of high-frequency vibrations,wrist pulse and human voice are realized.Moreover,a five-sensor optical data glove and a 2×2-MNF tactile sensor are demonstrated.These initial results pave the way toward a new category of optical devices ranging from ultrasensitive wearable sensors to optical skins.
基金the Doctoral Scientific Research Foundation of Xi’an Polytechnic University(BS15015)Thousand Talents Program of Shaanxi Province,San-qin Scholar Foundation of Shaanxi Province,Scientific Research Program Funded by Shaanxi Provincial Education Department(Program No.20JK0651)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Electrospinning is a versatile and popular method for the fabrication of ultrafine fibers and many parameters in electrospinning can be adjusted when ideal micro/nanofibers are required.In particular,the selection of a proper solvent condition is a fundamental and crucial step to produce electrospun ultrafine fibers.In this study,a commonly used biomaterial,polylactic acid(PLA),was dissolved in 7 different solvents and PLA micro/nanofibers were prepared by electrospinning.The morphology,porosity,mechanical property and static contact angle were characterized to determine the quality of the obtained product.The results show that different solvent conditions have a significant effect on both the diameter,surface smooth degree of PLA micro/nanofibers and the properties of the fibrous membranes.
基金supported by the National Natural Science Foundation of China,Nos.81974207(to JH),82001383(to DW)the Special Clinical Research Project of Health Profession of Shanghai Municipal Health Commission,No.20204Y0076(to DW)。
文摘Upregulation of vascular endothelial growth factor A/basic fibroblast growth factor(VEGFA/b FGF)expression in the penumbra of cerebral ischemia can increase vascular volume,reduce lesion volume,and enhance neural cell proliferation and differentiation,thereby exerting neuroprotective effects.However,the beneficial effects of endogenous VEGFA/b FGF are limited as their expression is only transiently increased.In this study,we generated multilayered nanofiber membranes loaded with VEGFA/b FGF using layer-by-layer self-assembly and electrospinning techniques.We found that a membrane containing 10 layers had an ideal ultrastructure and could efficiently and stably release growth factors for more than 1 month.This 10-layered nanofiber membrane promoted brain microvascular endothelial cell tube formation and proliferation,inhibited neuronal apoptosis,upregulated the expression of tight junction proteins,and improved the viability of various cellular components of neurovascular units under conditions of oxygen/glucose deprivation.Furthermore,this nanofiber membrane decreased the expression of Janus kinase-2/signal transducer and activator of transcription-3(JAK2/STAT3),Bax/Bcl-2,and cleaved caspase-3.Therefore,this nanofiber membrane exhibits a neuroprotective effect on oxygen/glucose-deprived neurovascular units by inhibiting the JAK2/STAT3 pathway.
基金financially supported by the Natural Science Foundation of Shandong Province (No. ZR2019YQ24)Taishan Scholars and Young Experts Program of Shandong Province (No.tsqn202103057)+1 种基金the Qingchuang Talents Induction Program of Shandong Higher Education Institution (Research and Innovation Team of Structural-Functional Polymer Composites)Special Financial of Shandong Province (Structural Design of High-efficiency Electromagnetic Wave-absorbing Composite Materials and Construction of Shandong Provincial Talent Teams)
文摘Application of novel radio technologies and equip-ment inevitably leads to electromagnetic pollution.One-dimensional polymer-based composite membrane structures have been shown to be an effective strategy to obtain high-performance microwave absorbers.Herein,we reported a one-dimensional N-doped carbon nanofibers material which encapsulated the hollow Co_(3)SnC_(0.7) nano-cubes in the fiber lumen by electrospinning.Space charge stacking formed between nanoparticles can be channeled by longitudinal fibrous structures.The dielectric constant of the fibers is highly related to the carbonization temperature,and the great impedance matching can be achieved by synergetic effect between Co_(3)SnC_(0.7) and carbon network.At 800℃,the necklace-like Co_(3)SnC_(0.7)/CNF with 5%low load achieves an excellent RL value of−51.2 dB at 2.3 mm and the effective absorption bandwidth of 7.44 GHz with matching thickness of 2.5 mm.The multiple electromagnetic wave(EMW)reflections and interfacial polarization between the fibers and the fibers internal contribute a major effect to attenuating the EMW.These strategies for regulating electromagnetic performance can be expanded to other electromagnetic functional materials which facilitate the development of emerging absorbers.
基金supported by the National Natural Science Foundation of China(52122702,52277215)the Natural Science Foundation of Heilongjiang Province of China(JQ2021E005)。
文摘Exploration of advanced gel polymer electrolytes(GPEs)represents a viable strategy for mitigating dendritic lithium(Li)growth,which is crucial in ensuring the safe operation of high energy density Li metal batteries(LMBs).Despite this,the application of GPEs is still hindered by inadequate ionic conductivity,low Li^(+)transference number,and subpar physicochemical properties.Herein,Ti O_(2-x)nanofibers(NF)with oxygen vacancy defects were synthesized by a one-step process as inorganic fillers to enhance the thermal/mechanical/ionic-transportation performances of composite GPEs.Various characterizations and theoretical calculations reveal that the oxygen vacancies on the surface of Ti O_(2-x)NF accelerate the dissociation of Li PF_6,promote the rapid transfer of free Li^(+),and influence the formation of Li F-enriched solid electrolyte interphase.Consequently,the composite GPEs demonstrate enhanced ionic conductivity(1.90m S cm^(-1)at room temperature),higher lithium-ion transference number(0.70),wider electrochemical stability window(5.50 V),superior mechanical strength,excellent thermal stability(210℃),and improved compatibility with lithium,resulting in superior cycling stability and rate performance in both Li||Li,Li||Li Fe PO_(4),and Li||Li Ni_(0.8)Co_(0.1)Mn_(0.1)O_(2)cells.Overall,the synergistic influence of nanofiber morphology and enriched oxygen vacancy structure of fillers on electrochemical properties of composite GPEs is comprehensively investigated,thus,it is anticipated to shed new light on designing high-performance GPEs LMBs.
基金funded by the Minister of Education,Culture,Research,and Technology of Indonesia through a research scheme of“Penelitian Fundamental–Reguler(PFR)2023”under a contract number of 1115c/IT9.2.1/PT.01.03/2023.
文摘This work presents the development of hierarchical niobium pentoxide(Nb_(2)O_(5))-based composite nanofiber membranes for integrated adsorption and photocatalytic degradation of methylene blue(MB)pollutants from aqueous solutions.The Nb_(2)O_(5) nanorods were vertically grown using a hydrothermal process on a base electrospun nanofibrous membrane made of polyacrylonitrile/polyvinylidene fluoride/ammonium niobate(V)oxalate hydrate(Nb_(2)O_(5)@PAN/PVDF/ANO).They were characterized using field-emission scanning electron microscopy(FE-SEM),X-ray diffraction(XRD)analysis,and Fourier transform infrared(FTIR)spectroscopy.These composite nanofibers possessed a narrow optical bandgap energy of 3.31 eV and demonstrated an MB degradation efficiency of 96%after 480 min contact time.The pseudo-first-order kinetic study was also conducted,in which Nb_(2)O_(5)@PAN/PVDF/ANO nanofibers have kinetic constant values of 1.29×10^(-2) min^(-1) and 0.30×10^(-2) min^(-1) for adsorption and photocatalytic degradation of MB aqueous solutions,respectively.These values are 17.7 and 7.8 times greater than those of PAN/PVDF/ANO nanofibers without Nb_(2)O_(5) nanostructures.Besides their outstanding photocatalytic performance,the developed membrane materials exhibit advantageous characteristics in recycling,which subsequently widen their practical use in environmental remediation applications.
基金This work was supported by the National Research Foundation of Korea(NRF)grant funded by the Korean Government(MSIT)(2019M3E6A1103944,2020R1A2C2010690).
文摘The unique characteristics of nanofibers in rational electrode design enable effec-tive utilization and maximizing material properties for achieving highly efficient and sustainable CO_(2) reduction reactions( CO_(2)RRs)in solid oxide elec-trolysis cells(SOECs).However,practical appli-cation of nanofiber-based electrodes faces chal-lenges in establishing sufficient interfacial contact and adhesion with the dense electrolyte.To tackle this challenge,a novel hybrid nanofiber electrode,La_(0.6)Sr_(0.4)Co_(0.15)Fe_(0.8)Pd_(0.05)O_(3-δ)(H-LSCFP),is developed by strategically incorporating low aspect ratio crushed LSCFP nanofibers into the excess porous interspace of a high aspect ratio LSCFP nanofiber framework synthesized via electrospinning technique.After consecutive treatment in 100% H_(2) and CO_(2) at 700°C,LSCFP nanofibers form a perovskite phase with in situ exsolved Co metal nanocatalysts and a high concentration of oxygen species on the surface,enhancing CO_(2) adsorption.The SOEC with the H-LSCFP electrode yielded an outstanding current density of 2.2 A cm^(-2) in CO_(2) at 800°C and 1.5 V,setting a new benchmark among reported nanofiber-based electrodes.Digital twinning of the H-LSCFP reveals improved contact adhesion and increased reaction sites for CO_(2)RR.The present work demonstrates a highly catalytically active and robust nanofiber-based fuel electrode with a hybrid structure,paving the way for further advancements and nanofiber applications in CO_(2)-SOECs.
基金financially sponsored by the Science and Technology Commission of Shanghai Municipality (20230742300 and 18595800700)Key Laboratory of Resource Chemistry, Ministry of Education (KLRC_ME2103)the project of “joint assignment” in Shanghai University led by Prof. Tongyue Gao from School of Mechatronic Engineering and Automation。
文摘Highly ordered and uniformly porous structure of conductive foams is a vital issue for various functional purposes such as piezoresistive sensing and electromagnetic interference(EMI) shielding. With the aids of Kevlar polyanionic chains, thermoplastic polyurethane(TPU) foams reinforced by aramid nanofibers(ANF) with adjustable pore-size distribution were successfully obtained via a nonsolvent-induced phase separation. In this regard, the most outstanding result is the in situ formation of ANF in TPU foams after protonation of Kevlar polyanion during the NIPS process. Furthermore, in situ growth of copper nanoparticles(Cu NPs) on TPU/ANF foams was performed according to the electroless deposition by using the tiny amount of pre-blended Ti_(3)C_(2)T_(x) MXene as reducing agents. Particularly, the existence of Cu NPs layers significantly promoted the storage modulus in 2,932% increments, and the well-designed TPU/ANF/Ti_(3)C_(2)T_(x) MXene(PAM-Cu) composite foams showed distinguished compressive cycle stability. Taking virtues of the highly ordered and elastic porous architectures, the PAM-Cu foams were utilized as piezoresistive sensor exhibiting board compressive interval of 0–344.5 kPa(50% strain) with good sensitivity at 0.46 kPa^(-1). Meanwhile,the PAM-Cu foams displayed remarkable EMI shielding effectiveness at 79.09 dB in X band. This work provides an ideal strategy to fabricate highly ordered TPU foams with outstanding elastic recovery and excellent EMI shielding performance, which can be used as a promising candidate in integration of satisfactory piezoresistive sensor and EMI shielding applications for human–machine interfaces.
基金financial support from projects funded by the National Natural Science Foundation of China(22179017,52172038).
文摘Hydrogen sulfide(H_(2)S)is an industrial exhausted gas that is highly toxic to humans and the environment.Combining desulfurization and fabrication of cathode materials for lithium-sulfur batteries(LSBs)can solve this issue with a double benefit.Herein,the amino-functionalized lotus root-like carbon nanofibers(NH_(2)-PLCNFs)are prepared by the amination of electrospinning carbon nanofibers under dielectric barrier discharge plasma.Selective catalytic oxidation of H_(2)S to elemental sulfur(S)is achieved over the metalfree NH_(2)-PLCNFs catalyst,and the obtained composite S@NH_(2)-PLCNFs is further used as cathode in LSBs.NH_(2)-PLCNFs enable efficient desulfurization(removal capacity as high as 3.46 g H_(2)S g^(−1) catalyst)and strongly covalent stabilization of S on modified carbon nanofibers.LSBs equipped with S@NH_(2)-PLCNFs deliver a high specific capacity of 705.8 mA h g^(−1) at 1 C after 1000 cycles based on the spatial confinement and the covalent stabilization of electroactive materials on amino-functionalized porous carbon matrix.It is revealed that S@NH_(2)-PLCNFs obtained by this kind of chemical vapor deposition leads to a more homogeneous S distribution and superior electrochemical performance to the sample S/NH_(2)-PLCNF-M prepared by the traditional molten infusion.This work opens a new avenue for the combination of environment protection and energy storage.
基金financially supported by the National Natural Science Foundation of China(NSFC)(Grant Nos.22175007,21975007,52172080,and 22005012)the National Natural Science Foundation for Outstanding Youth Foundation,the Fundamental Research Funds for the Central Universities,the National Program for Support of Top-notch Young Professionalsthe 111 project(Grant No.B14009).
文摘The rational synergy of chemical composition and spatial nanostructures of electrode materials play important roles in high-performance energy storage devices.Here,we designed pea-like MoS_(2)@NiS_(1.03)-carbon hollow nanofibers using a simple electrospinning and thermal treatment method.The hierarchical hollow nanofiber is composed of a nitrogen-doped carbon-coated NiS_(1.03) tube wall,in which pea-like uniformly discrete MoS_(2) nanoparticles are enclosed.As a sodium-ion battery electrode material,the MoS_(2)@NiS_(1.03)-carbon hollow nanofibers have abundant diphasic heterointerfaces,a conductive network,and appropriate volume variation-buffering spaces,which can facilitate ion diffusion kinetics,shorten the diffusion path of electrons/ion,and buffer volume expansion during Na^(+)insertion/extraction.It shows outstanding rate capacity and long-cycle performance in a sodium-ion battery.This heterogeneous hollow nanoarchitectures designing enlightens an efficacious strategy to boost the capacity and long-life stability of sodium storage performance of electrode materials.
基金funded by the Ministry of Business,Innovation and Employment Endeavour Fund of New Zealand(MAUX1801)supported by the China Postdoctoral Science Foundation(2021M692622).
文摘An efficient chamber-induced activation method was applied for the preparation of holey graphene/cellulose nanofiber-based film with high specific surface area(SSA)and multiple channels through the graphene nanosheets.With the cellulose nanofiber(CNF)simultaneously serving as“dispersing agent,”“spacer,”and“activating agent,”the graphene oxide(GO)nanosheets are perforated by the pyrolysis gas from CNF in the confined space inside the hybrid films,uniformly dispersed,and sandwiched between CNF networks with less agglomeration and restacking.Additionally,we have proved that H2O and H2 are primarily responsible for the activation and etching of GO/CNF film.As the CNF content increases,the mesoporosity of the activated reduced GO/CNF(A-RGO/CNF)film increases,and the graphene nanosheets show more nanopore perforations.Benefitting from the high SSA,high density,moderate mesoporosity,and abundant channels for ion diffusion through the graphene nanosheets,the A-RGO/CNF film exhibits the highest specific capacitance of 323(236)F g^(−1)(F cm^(−3))at 1Ag^(−1).For the A-RGO5/CNF5 film containing half CNF and half GO,an excellent comprehensive electrochemical performance including superior rate performance(208(160)F g^(−1)(F cm^(−3))at 60Ag^(−1))is exhibited.Moreover,the A-RGO5/CNF5 electrode in an all-solid-state flexible symmetric supercapacitor delivers a high specific capacitance of 250(193)F g^(−1)(F cm^(−3))at 1Ag^(−1).This study provides a novel idea for the preparation of holey graphene-based film for supercapacitor electrodes.The strategy of simultaneously employing CNF as“dispersing agent,”“spacer,”and“activating agent”also offers a new vision for the assembly of homogeneous nanohybrid material and the utilization of pyrolysis gas.
基金the UK Engineering and Physical Sciences Research Council(EPSRC)for funding this work under the Doctoral Training Partnership(DTP)award(EP/N509772/1).
文摘One of the major problems limiting the applications of electric double-layer(EDLC)supercapacitor devices is their inability to maintain their cell voltage over a significant period.Self-discharge is a spontaneous decay in charged energy,often resulting in fully depleted devices in a matter of hours.Here,a new method for suppressing this self-discharge phenomenon is proposed by using directionally polarized piezoelectric electrospun nanofiber films as separator materials.Tailored engineering of polyvinylidene fluoride(PVDF)nanofiber films containing a small concentration of sodium dodecyl sulfate(SDS)results in a high proportion of polarβphases,reaching 380.5%of the total material.Inducing polarity into the separator material provides a reverse-diode mechanism in the device,such that it drops from an initial voltage of 1.6 down to 1 V after 10 h,as opposed to 0.3 V with a nonpolarized,commercial separator material.Thus,the energy retained for the polarized separator is 37%and 4%for the nonpolarized separator,making supercapacitors a more attractive solution for long-term energy storage.
基金supported by the National Natural Science Foundation of China(Grant No.52175331)the Support plan for Outstanding Youth Innovation Team in Universities of Shandong Province,China(Grand No.2020KJB003)Natural Science Foundation of Shandong Province,China(Granted Nos.ZR2022ME014,ZR2021ME139 and ZR2020ZD04)。
文摘Flexible and stretchable transparent electrodes are widely used in smart display,energy,wearable devices and other fields.Due to the limitations of flexibility and stretchability of indium tin oxide electrodes,alternative electrodes have appeared,such as metal films,metal nanowires,and conductive meshes.However,few of the above electrodes can simultaneously have excellent flexibility,stretchability,and optoelectronic properties.Nanofiber(NF),a continuous ultra-long one-dimensional conductive material,is considered to be one of the ideal materials for high-performance transparent electrodes with excellent properties due to its unique structure.This paper summarizes the important research progress of NF flexible transparent electrodes(FTEs)in recent years from the aspects of NF electrode materials,preparation technology and application.First,the unique advantages and limitations of various NF materials are systematically discussed.Then,we summarize the preparation technology of various advanced NF FTEs,and point out the future development trend.We also discuss the application of NFs in solar cells,supercapacitors,electric heating equipments,sensors,etc,and analyze its development potential in flexible electronic equipment,as well as problems that need to be solved.Finally,the challenges and future development trends are proposed in the wide application of NF FTEs in the field of flexible optoelectronics.
基金Funded by the Doctoral Fund of Chengdu University (2081919131)the Open Fund of Material Corrosion and Protection Key Laboratory of Sichuan Province (2021CL27)the Sichuan Science and Technology Program (2023YFG0229)。
文摘OER catalyst of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C(NiFeSC series)mixed crystal composite nanofibers was prepared by electrospinning and atmospheric heat treatment process.The testing results indicate that the diameters of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C composite nanofibers is about 200 nm,the grains size is about 1-3 nm,and the fiber surface is rough.The electrochemical test results show that the heterojunction of the prepared Ni_(3)Fe/Ni_(4)S_(3)/Ni/C hybrid crystal composite nanofiber has synergistic effect with sulfide,and exhibits good electrocatalytic activity of water decomposition and OER in alkaline system.The OER electrocatalytic performance of Ni_(3)Fe/Ni_(4)S_(3)/Ni/C composite electrode prepared via a heat treatment at 1000℃process was tested in 1 mol/L KOH electrolytes.The results show that the overpotential is about 298 mV,the Tafel slope is about 74 mV?dec-1,and the surface resistance is about 1.69Ω·cm^(2),at the current density of 10 mA·cm^(-2).
基金supported by the Science and Technology Plans of Tianjin(18PTSYJC00170)the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(YESS20160168)The Analytical&Testing Center of Tiangong University was appreciated.
文摘A high performance preoxidized poly(acrylonitrile)(O-PAN)nanofiber membrane with excellent solvent resistance,thermal stability and flexibility was fabricated by the preoxidation of electrospun PAN nanofiber membrane.The performance of resultant O-PAN nanofiber membrane was optimized by altering the PAN concentration and preoxidation temperature.The results showed that the O-PAN nanofiber membrane which made from PAN concentration of 14%(mass)and preoxidation temperature of 250.0℃ have a more optimal comprehensive performance.In the long-term separation test of SiO2 particle(1 μm)in DMAc suspension,the permeate flux of O-PAN nanofiber membrane stabilized at 227.91 L·m^(-2)·h^(-1)(25℃,0.05 MPa)while the SiO2 rejection above 99.6%,which showed excellent solvent resistance and separation performance.In order to further explore the application of the O-PAN nanofiber membrane,the OPAN nanofiber membrane was treated with fluoride and used in oil/water separation process.The O-PAN nanofiber membrane after hydrophobic treatment showed excellent hydrophobicity and good oil/water separation performance with the permeate flux about 969.59 L·m^(-2)·h^(-1)while the separation efficiency above 96.1%.The O-PAN nanofiber membrane exhibited a potential application prospect in harsh environment separation.
基金supported by the National Natural Science Foundation of China(No.51907193,51822706,and 51777200)the Key Research Program of Frontier Sciences,CAS(No.ZDBS-LY-JSC047)the Youth Innovation Promotion Association,CAS(No.2020145)
文摘Carbon nanofiber(CNF)was widely utilized in the field of electrochemical energy storage due to its superiority of conductivity and mechanics.However,CNF was generally prepared at relatively high temperature.Herein,nitrogen-doped hard carbon nanofibers(NHCNFs)were prepared by a lowtemperature carbonization treatment assisted with electrospinning technology.Density functional theory analysis elucidates the incorporation of nitrogen heteroatoms with various chemical states into carbon matrix would significantly alter the total electronic configurations,leading to the robust adsorption and efficient diffusion of Na atoms on electrode interface.The obtained material carbonized at 600°C(NHCNF-600)presented a reversible specific capacity of 191.0 mAh g^(−1)and no capacity decay after 200 cycles at 1 A g^(−1).It was found that the sodium-intercalated degree had a correlation with the electrochemical impedance.A sodium-intercalated potential of 0.2 V was adopted to lower the electrochemical impedance.The constructed sodium-ion capacitor with activated carbon cathode and presodiated NHCNF-600 anode can present an energy power density of 82.1 Wh kg^(−1)and a power density of 7.0 kW kg^(−1).