We have developed a computerized system for measuring field electron emission （FE） and field ionization （FI）, which has a three-electrode configuration with emitters biased up to 25 kV, and is programmed by the La...We have developed a computerized system for measuring field electron emission （FE） and field ionization （FI）, which has a three-electrode configuration with emitters biased up to 25 kV, and is programmed by the Labview software. The current-voltage curves of nano-tip tungsten and carbon nanotube （CNT） arrays were measured. The electron emission of CNTs proceeded with a turn-on field of 1.24 V/μm and a threshold field of 1.85 V/μm. Compared to the field emission, field ionization turned on at 3.5 V/μm. Raman spectroscopy and scanning electron microscopy （SEM） measurements showed degradation of the CNTs after FE/FI testing. The measurement of a W-tip revealed strong electron emission and instability behavior at a field strength higher than 7.0 V/μm.展开更多
Turbulence, universally exist in nature and human activities, is a kind of three-dimensional, irregular, unsteady flow. Ever since 19th century when people started to investigated turbulent flow technically, they have...Turbulence, universally exist in nature and human activities, is a kind of three-dimensional, irregular, unsteady flow. Ever since 19th century when people started to investigated turbulent flow technically, they have never dropped the po-tent and intuitionistic experimental method. Recently, with the development of aviation and aerospace industry, espe-cially with the increase desire of supersonic and hypersonic flight, the mechanism of high speed and compressible flow has become hot topic of fluid research, resulting in development of measurement method and technique. When encoun-tering compressible high flow, traditional techniques, such as schilieren, shadow and interference, cannot measure fine flow structures. Fortunately, multiple-discipline integration of nano technique, laser technique and imaging technique provides a new design for fluid measurement。Nano-tracer planar laser scattering (NPLS) is a new flow visualization technique, which was developed by the authors’ group in 2005, and it can visualize time correctional flow structure in a cross-section of instantaneous 3D supersonic flow at high spatiotemporal resolution. Many studies have demonstrated that NPLS is a powerful tool to study supersonic turbulence.展开更多
In order to understand lubrication mechanism at the nanoscale, researchers have used many physical experimental approaches, such as surface force apparatus, atomic force microscopy and ball-on-disk tribometer. The res...In order to understand lubrication mechanism at the nanoscale, researchers have used many physical experimental approaches, such as surface force apparatus, atomic force microscopy and ball-on-disk tribometer. The results show that the variation rules of the friction force, film thicknessand viscosity of the lubricant at the nanoscale are different from elastohydrodynamic lubrication （EHL）. It is speculated that these differences are attributed to the special arrangement of the molecules at the nanoscale. However, it is difficult to obtain the molecular orientation and distribution directly from the lubricant molecules in these experiments. In recent years, more and more attention has been paid to use new techniques to overcome the shortcomings of traditional experiments, including various spectral methods. The most representative achievements in the experimental research of molecular arrangement are reviewed in this paper： The change of film structure of a liquid crystal under confinement has been obtained using X-ray method. The molecular orientation change of lubricant films has been observed using absorption spectroscopy. Infrared spectroscopy has been used to measure the anisotropy of molecular orientation in the contact region when the lubricant film thickness is reduced to a few tens of nanometers. In situ Raman spectroscopy has been performed to measure the molecular orientation of the lubricant film semi-quantitatively. These results prove that confinement and shear in the contact region can change the arrangement of lubricant molecules. As a result, the lubrication characteristics are affected. The shortages of these works are also discussed based on practicable results. Further work is needed to separate the information of the solid-liquid interface from the bulk liquid film.展开更多
The reliability of industrial installation requires minimum leakage of pressurized sealed joints during operation. At the design stage, the leakage behavior of the gasket must be one of the most important parameter in...The reliability of industrial installation requires minimum leakage of pressurized sealed joints during operation. At the design stage, the leakage behavior of the gasket must be one of the most important parameter in the gasket selection. The objective of the work presented in this paper is to develop an analytical leak rate prediction methodology used in gasketed joints. A pseudo analytical-experimental innovative approach was used to estimate the characteristics of the porous structure for the purpose of predicting accurate leak rate through gaskets with different fluids under conditions similar to those of operation. The analytical model assumes the flow to be continuum but employs a slip boundary condition on the leak path wall to determine the porosity parameters of the gasket. The analytical model results are validated and confronted against experimental data which were conducted under various conditions of fluid media, pressure, gasket stress and temperature. Two experimental test rigs fully automate that accurately reproduces the real leakage behavior of the gasketed joint have been developed to analyze the mechanical and thermal effects on the gasket flow regime. The gas leaks were measured with multi-gas mass spectrometers while liquid leaks were measure using a sophisticated detection system based on the pressure rise method.展开更多
基金supported by National Natural Science Foundation(No.11075121)the International Science and Technology Cooperation Program(No.2010DFA02010)Three Gorges University of China(KJ2009B011)
文摘We have developed a computerized system for measuring field electron emission （FE） and field ionization （FI）, which has a three-electrode configuration with emitters biased up to 25 kV, and is programmed by the Labview software. The current-voltage curves of nano-tip tungsten and carbon nanotube （CNT） arrays were measured. The electron emission of CNTs proceeded with a turn-on field of 1.24 V/μm and a threshold field of 1.85 V/μm. Compared to the field emission, field ionization turned on at 3.5 V/μm. Raman spectroscopy and scanning electron microscopy （SEM） measurements showed degradation of the CNTs after FE/FI testing. The measurement of a W-tip revealed strong electron emission and instability behavior at a field strength higher than 7.0 V/μm.
文摘Turbulence, universally exist in nature and human activities, is a kind of three-dimensional, irregular, unsteady flow. Ever since 19th century when people started to investigated turbulent flow technically, they have never dropped the po-tent and intuitionistic experimental method. Recently, with the development of aviation and aerospace industry, espe-cially with the increase desire of supersonic and hypersonic flight, the mechanism of high speed and compressible flow has become hot topic of fluid research, resulting in development of measurement method and technique. When encoun-tering compressible high flow, traditional techniques, such as schilieren, shadow and interference, cannot measure fine flow structures. Fortunately, multiple-discipline integration of nano technique, laser technique and imaging technique provides a new design for fluid measurement。Nano-tracer planar laser scattering (NPLS) is a new flow visualization technique, which was developed by the authors’ group in 2005, and it can visualize time correctional flow structure in a cross-section of instantaneous 3D supersonic flow at high spatiotemporal resolution. Many studies have demonstrated that NPLS is a powerful tool to study supersonic turbulence.
基金Supported by National Natural Science Foundation of China(Grant Nos.51335005,51321092)
文摘In order to understand lubrication mechanism at the nanoscale, researchers have used many physical experimental approaches, such as surface force apparatus, atomic force microscopy and ball-on-disk tribometer. The results show that the variation rules of the friction force, film thicknessand viscosity of the lubricant at the nanoscale are different from elastohydrodynamic lubrication （EHL）. It is speculated that these differences are attributed to the special arrangement of the molecules at the nanoscale. However, it is difficult to obtain the molecular orientation and distribution directly from the lubricant molecules in these experiments. In recent years, more and more attention has been paid to use new techniques to overcome the shortcomings of traditional experiments, including various spectral methods. The most representative achievements in the experimental research of molecular arrangement are reviewed in this paper： The change of film structure of a liquid crystal under confinement has been obtained using X-ray method. The molecular orientation change of lubricant films has been observed using absorption spectroscopy. Infrared spectroscopy has been used to measure the anisotropy of molecular orientation in the contact region when the lubricant film thickness is reduced to a few tens of nanometers. In situ Raman spectroscopy has been performed to measure the molecular orientation of the lubricant film semi-quantitatively. These results prove that confinement and shear in the contact region can change the arrangement of lubricant molecules. As a result, the lubrication characteristics are affected. The shortages of these works are also discussed based on practicable results. Further work is needed to separate the information of the solid-liquid interface from the bulk liquid film.
文摘The reliability of industrial installation requires minimum leakage of pressurized sealed joints during operation. At the design stage, the leakage behavior of the gasket must be one of the most important parameter in the gasket selection. The objective of the work presented in this paper is to develop an analytical leak rate prediction methodology used in gasketed joints. A pseudo analytical-experimental innovative approach was used to estimate the characteristics of the porous structure for the purpose of predicting accurate leak rate through gaskets with different fluids under conditions similar to those of operation. The analytical model assumes the flow to be continuum but employs a slip boundary condition on the leak path wall to determine the porosity parameters of the gasket. The analytical model results are validated and confronted against experimental data which were conducted under various conditions of fluid media, pressure, gasket stress and temperature. Two experimental test rigs fully automate that accurately reproduces the real leakage behavior of the gasketed joint have been developed to analyze the mechanical and thermal effects on the gasket flow regime. The gas leaks were measured with multi-gas mass spectrometers while liquid leaks were measure using a sophisticated detection system based on the pressure rise method.
