Experimental study of the effects of a multistage pore-throat structure on the seepage characteristics of sandstones in the Beibuwan Basin:Insights into the flooding mode

To investigate the relationship between grain sizes, seepage capacity, and oil-displacement efficiency in the Liushagang Formation of the Beibuwan Basin, this study identifies the multistage pore-throat structure as a crucial factor through a comparison of oil displacement in microscopic pore-throat experiments. The two-phase flow evaluation method based on the Li-Horne model is utilized to effectively characterize and quantify the seepage characteristics of different reservoirs, closely relating them to the distribution of microscopic pores and throats. It is observed that conglomerate sandstones at different stages exhibit significant heterogeneity and noticeable differences in seepage capacity, highlighting the crucial role played by certain large pore throats in determining seepage capacity and oil displacement efficiency. Furthermore, it was found that the displacement effects of conglomeratic sandstones with strong heterogeneity were inferior to those of conventional homogeneous sandstone, as evidenced by multiple displacement experiments conducted on core samples with varying granularities and flooding systems. Subsequently, core-based experiments on associated gas flooding after water flooding were conducted to address the challenge of achieving satisfactory results in a single displacement mode for reservoirs with significant heterogeneity. The results indicate that the oil recovery rates for associated gas flooding after water flooding increased by 7.3%-16.4% compared with water flooding alone at a gas-oil ratio of approximately 7000 m^(3)/m^(3). Therefore, considering the advantages of gas flooding in terms of seepage capacity, oil exchange ratio, and the potential for two-phase production, gas flooding is recommended as an energy supplement mode for homogeneous reservoirs in the presence of sufficient gas source and appropriate tectonic angle. On the other hand, associated gas flooding after water flooding is suggested to achieve a more favorable development effect compared to a single mode of energy supplementation for strongly heterogeneous sandstone reservoirs.

Solid-phase sintering process and forced convective heat transfer performance of porous-structured micro-channels

A solid-phase sintering process for the low-cost fabrication of composite micro-channels was developed. Three kinds of composite micro-channels with metallic porous structures were designed. The sintering process was studied and optimized to obtain porous-structured micro-channels with high porosity. The flow resistance and heat transfer performance in the composite micro-channels were investigated. The composite micro-channels show acceptable flow resistance, significant enhancement of heat transfer and dramatic improvement of flow boiling stability, which indicates a promising prospect for the application in forced convective heat transfer.

Pore Size Distribution of a Tight Sandstone Reservoir and its Effect on Micro Pore-throat Structure: A Case Study of the Chang 7 Member of the Xin’anbian Block, Ordos Basin, China

Pore distribution and micro pore-throat structure characteristics are significant for tight oil reservoir evaluation, but their relationship remains unclear. This paper selects the tight sandstone reservoir of the Chang 7 member of the Xin’anbian Block in the Ordos Basin as the research object and analyzes the pore size distribution and micro pore-throat structure using field emission scanning electron microscopy(FE-SEM), high-pressure mercury injection(HPMI), highpressure mercury injection, and nuclear magnetic resonance(NMR) analyses. The study finds that:(1) Based on the pore size distribution, the tight sandstone reservoir is characterized by three main patterns with different peak amplitudes. The former peak corresponds to the nanopore scale, and the latter peak corresponds to the micropore scale. Then, the tight sandstone reservoir is categorized into three types: type 1 reservoir contains more nanopores with a nanopore-to-micropore volume ratio of 82:18;type 2 reservoir has a nanopore-to-micropore volume ratio of 47:53;and type 3 reservoir contains more micropores with a nanopore-to-micropore volume ratio of 35:65.(2) Affected by the pore size distribution, the throat radius distributions of different reservoir types are notably offset. The type 1 reservoir throat radius distribution curve is weakly unimodal, with a relatively dispersed distribution and peak ranging from 0.01 μm to 0.025 μm. The type 2 reservoir’s throat radius distribution curve is single-peaked with a wide distribution range and peak from 0.1 μm to 0.25 μm. The type 3 reservoir’s throat radius distribution curve is single-peaked with a relatively narrow distribution and peak from 0.1 μm to 0.25 μm. With increasing micropore volume, pore-throat structure characteristics gradually improve.(3) The correlation between micropore permeability and porosity exceeds that of nanopores, indicating that the development of micropores notably influences the seepage capacity. In the type 1 reservoir, only the mean radius and effective porosity have suitable correlations with the nanopore and micropore porosities. The pore-throat structure parameters of the type 2 and 3 reservoirs have reasonable correlations with the nanopore and micropore porosities, indicating that the development of these types of reservoirs is affected by the pore size distribution. This study is of great significance for evaluating lacustrine tight sandstone reservoirs in China. The research results can provide guidance for evaluating tight sandstone reservoirs in other regions based on pore size distribution.

Pore-throat structure characteristics and its impact on the porosity and permeability relationship of Carboniferous carbonate reservoirs in eastern edge of Pre-Caspian Basin

Carboniferous carbonate reservoirs at the eastern edge of the Pre-Caspian Basin have undergone complex sedimentation,diagenesis and tectonism processes,and developed various reservoir space types of pores,cavities and fractures with complicated combination patterns which create intricate pore-throats structure.The complex pore-throat structure leads to the complex porosity-permeability relationship,bringing great challenges for classification and evaluation of reservoirs and efficient development.Based on the comprehensive analysis on cores,thin sections,SEM,mercury intrusion,routine core analysis and various tests,this paper systematically investigated the features and main controlling factors of pore-throats structure and its impact on the porosity-permeability relationship of the four reservoir types which were pore-cavity-fracture,pore-cavity,pore-fracture and pore,and three progresses are made.(1)A set of classification and descriptive approach for pore-throat structure of Carboniferous carbonate reservoirs applied to the eastern edge of the Pre-Caspian Basin was established.Four types of pore-throat structures were developed which were wide multimodal mode,wide bimodal mode,centralized unimodal mode and asymmetry bimodal mode,respectively.The discriminant index of pore-throat structure was proposed,realizing the quantitative characterization of pore-throat structure types.(2)The microscopic heterogeneity of pore reservoir was the strongest and four types of pore-throat structures were all developed.The pore-fracture and pore-cavity-fracture reservoirs took the second place,and the microscopic heterogeneity of pore-cavity reservoir was the weakest.It was revealed that the main controlling factor of pore-throat structure was the combination patterns of reservoir space types formed by sedimentation,diagenesis and tectonism.(3)It was revealed that the development of various pore-throat structure types was the important factor affecting poroperm relationship of reservoirs.The calculation accuracy of permeability of reservoirs can be improved remarkably by subdividing the pore-throat structure types.This study deepens the understanding of pore-throat structure of complicated carbonate reservoirs,and is conducive to classification and evaluation,establishment of precise porosity-permeability relationship and highly efficient development of carbonate reservoirs.

Experimental analysis of matrix moveable oil saturation in tight sandstone reservoirs of the south Ordos Basin,China

Tight oil reservoirs in the south Ordos Basin are characterized by fractured,heterogeneous oil-bearing strata(an oil saturation of less than 55%on average),normal pressure(0.8±)and extra-low permeability(less than 0.3 mD).In the Chang 8 tight sandstone reservoir in Honghe oilfield,micro-and nanopores,especially those with a pore-throat radius of less than 1 mm,account for more than 90%.Fluid flow in the matrix is non-linear and crude oil flow rates are very low under normal pressure gradients.An improved understanding of oil mobility in a tight matrix is key to further development of normalpressure tight-oil resources in the continental basin.In this study,constant-velocity and high-pressure mercury injection experiments were conducted using samples of typical tight sandstone cores obtained from the south of Ordos Basin.A new method for reconstructing the full-scale pore-throat distribution characteristics of tight sandstone reservoirs was established successfully,based on which multistage centrifugal tests,tests of low-pressure differential displacement of oil by water,and nuclear magnetic resonance tests were conducted in order to obtain the distribution characteristics of moveable fluid in different pores.The moveable oil saturation(MOS)and degree of oil recovery(i.e.ratio of accumulative oil production to producing geologic reserves)of the core samples under different differential pressures for displacement were determined.As for the tight oil reservoirs in the south Ordos Basin,the moveable fluids are mainly stored in sub-micron(0.10-0.5 mm)pores.For Type I reservoirs(k>0.1 mD),the volume percentage of moveable fluid in pores with a radius larger than 0.5 mm is relatively high(greater than 40%).The degree of oil recovery of water flooding serves as the basis for forecasting recoverable reserves for tight oil reservoirs.Recoverable reserves under water flooding,mainly occur in pores with a radius greater than 0.5 mm.The contribution of Type I reserves to oil production is observed to be greater than 60%,and the degree of oil recovery reaches up to 17.1%.These results help improve our understanding on the evaluation and classification of Chang 8 tight sandstone reservoirs in Honghe oilfield and serve as theoretical basis for pilot tests to explore effective injection media and development methods to improve the matrix-driven pressure differences and displacement efficiency for oil.

Reservoir Rock Facies──Case Presentation of Sandstone Type

The reservoir rock facies is presented by its principal indieators to show the aspects of sedimentary facies,diagenetic change and oil-gas indication. These indicators used by the author are 1) the petrologic──of which the sedimentary facies and vitrinite reflectance are included, 2) the physical ── pore/throat di-ameter ratio and coordination number of throat connecting pore, and 3) the geochemical──photochemical parameters of individual organic inclusion. Based on the above mentioned quantitative indicators,the defined reservoir rock facies may not only be used for itself evaluation, but also may be put in facies column or facies-palaeogeographic map to predict or to trace oil-gas reservoir. Microscope photometry,micro-FT-IR and Laser Raman methods were used for studying all the aforesaid parameters by means of thinned polished sections from core or cemented cuttings, except the 3-D others, from parallel and vertical to bedding or some duplicate core samples, that the rose fluorescein preparation must be soaked in for the convenience of studying pore throat structure.