Bird specimen number linked with species trait and climate niche breadth

Biological specimens are fundamental for taxonomy and flora/fauna research.More importantly,they also play crucial roles in recording environmental impacts on morphology and behavior,which is vital for biodiversity research and conservation.However,there are few systematic studies on the patterns and drivers of bird specimen number at regional scales.This study is the first attempt to examine the relationships between bird specimen number and species traits as well as climate niche breadth in China,aiming to answer two questions:1)how do species’temperature niche breadth and precipitation niche breadth influence specimen number?2)which trait is most associated with bird specimen number?The associations between bird specimen number and explanatory variables were examined using ordinary least squares,generalized linear models,phylogenetic generalized linear mixed models,and multiple comparisons.The results showed that Muscicapidae was the family with the highest specimen number,and Passeriformes was the order with the highest specimen number.Bird specimen number significantly increased with larger temperature niche breadth and precipitation niche breadth.Specimen number was also positively associated with geographic range size,habitat specificity,hunting vulnerability and clutch size,but negatively associated with body size.These findings suggest that future bird specimen collection should pay more attention to birds with limited ecological niches,large body sizes,and small clutch sizes.This research enhances the use of bird specimen data to study and preserve biodiversity.

Dynamic characteristics of coal specimens with varying static preloading levels under low-frequency disturbance load

The mechanical properties of residual coal pillars under the influence of upward mining disturbances significantly affect the safety of residual mining activities on working faces.This study conducted low-frequency disturbance dynamic uniaxial compression tests on coal specimens using a self-developed dynamic-static load coupling electro-hydraulic servo system,and studied the strength evolutions,surface deformations,acoustic emission(AE)characteristic parameters,and the failure modes of coal specimens with different static preloading levels were studied.The disturbance damage is positively correlated with the coal specimen static preload level.Specifically,the cumulative AE count rates of the initial accelerated damage stage for the coal specimens with static preloading level of 60%and 70%of the uniaxial compressive strength(UCS)were 2.66 and 3.19 times that of the 50%UCS specimens,respectively.Macroscopically,this behaviour manifested as a decrease in the compressive strength,and the mean strengths of the disturbance-damaged coal specimens with 60%and 70%of UCS static preloading decreased by 8.53%and 9.32%,respectively,compared to those of the specimens under pure static loading.The crack sources,such as the primary fissures,strongly control the dynamic response of the coal specimen.The difference between the dynamic responses of the coal specimens and that of dense rocks is significant.

Species’ geographical range, environmental range and traits lead to specimen collection preference of dominant plant species of grasslands in Northern China

Many different factors,such as species traits,socio-economic factors,geographical and environmental factors,can lead to specimen collection preference.This study aims to determine whether grassland specimen collection in China is preferred by species traits(i.e.,plant height,flowering and fruiting period),environmental range(i.e.,the temperature and precipitation range)and geographical range(i.e.,distribution range and altitudinal range).Ordinary least squares models and phylogenetic generalized linear mixed models were used to analyze the relationships between specimen number and the explanatory variables.Random Forest models were then used to find the most parsimonious multivariate model.The results showed that interannual variation in specimen number between 1900 and 2020 was considerable.Specimen number of these species in southeast China was notably lower than that in northwest China.Environmental range and geographical range of species had significant positive correlations with specimen number.In addition,there were relatively weak but significant associations between specimen number and species trait(i.e.,plant height and flowering and fruiting period).Random Forest models indicated that distribution range was the most important variable,followed by flowering and fruiting period,and altitudinal range.These findings suggest that future floristic surveys should pay more attention to species with small geographical range,narrow environmental range,short plant height,and short flowering and fruiting period.The correction of specimen collection preference will also make the results of species distribution model,species evolution and other works based on specimen data more accurate.

Direct Pointwise Comparison of FE Predictions to StereoDIC Measurements:Developments and Validation Using Double Edge-Notched Tensile Specimen

To compare finite element analysis(FEA)predictions and stereovision digital image correlation(StereoDIC)strain measurements at the same spatial positions throughout a region of interest,a field comparison procedure is developed.The procedure includes(a)conversion of the finite element data into a triangular mesh,(b)selection of a common coordinate system,(c)determination of the rigid body transformation to place both measurements and FEA data in the same system and(d)interpolation of the FEA nodal information to the same spatial locations as the StereoDIC measurements using barycentric coordinates.For an aluminum Al-6061 double edge notched tensile specimen,FEA results are obtained using both the von Mises isotropic yield criterion and Hill’s quadratic anisotropic yield criterion,with the unknown Hill model parameters determined using full-field specimen strain measurements for the nominally plane stress specimen.Using Hill’s quadratic anisotropic yield criterion,the point-by-point comparison of experimentally based full-field strains and stresses to finite element predictions are shown to be in excellent agreement,confirming the effectiveness of the field comparison process.

Perioperative outcomes of transvaginal specimen extraction laparoscopic total gastrectomy and conventional laparoscopicassisted total gastrectomy

BACKGROUND Natural orifice specimen extraction surgery(NOSES)has emerged as a promising alternative compared to conventional laparoscopic-assisted total gastrectomy(LATG)for treating gastric cancer(GC).However,evidence regarding the efficacy and safety of NOSES for GC surgery is limited.This study aimed to compare the safety and feasibility,in addition to postoperative complications of NOSES and LATG.METHODS Dual circular staplers were used in Roux-en-Y digestive tract reconstruction for transvaginal specimen extraction LATG,and its outcomes were compared with LATG in a cohort of 51 GC patients with tumor size≤5 cm.The study was conducted from May 2018 to September 2020,and patients were categorized into the NOSES group(n=22)and LATG group(n=29).Perioperative parameters were compared and analyzed,including patient and tumor characteristics,postoperative outcomes,and anastomosis-related complications,postoperative hospital stay,the length of abdominal incision,difference in tumor type,postoperative complications,and postoperative survival.RESULTS Postoperative exhaust time,operation duration,mean postoperative hospital stay,length of abdominal incision,number of specific staplers used,and Brief Illness Perception Questionnaire score were significant in both groups(P<0.01).In the NOSES group,the postoperative time to first flatus,mean postoperative hospital stay,and length of abdominal incision were significantly shorter than those in the LATG group.Patients in the NOSES group had faster postoperative recovery,and achieved abdominal minimally invasive incision that met aesthetic requirements.There were no significant differences in gender,age,tumor type,postoperative complications,and postoperative survival between the two groups.CONCLUSION The application of dual circular staplers in Roux-en-Y digestive tract reconstruction combined with NOSES gastrectomy is safe and convenient.This approach offers better short-term outcomes compared to LATG,while long-term survival rates are comparable to those of conventional laparoscopic surgery.

Wireless Preamplifier for the Specimen Current Mode Detector in a SEM

Using a scanning electron microscope (SEM) in the back-scattered electron (BSE) mode the composition of multi-element specimens may be determined based on the strong dependence of emission coefficient η on the average atomic number of elements Z. The output video signal of the usual BSE detectors is produced from their sensors, and the larger proportion of high-energy electrons with modified spectrum is added. Since η = is/ip (is and ip currents of specimen and probe), better accuracy must be achieved by direct measurements those currents on the specimen surface. Here, an experimental model of a current detector for a presented specimen is described. The cage is mounted on the carousel of the moving specimen stage. The input of the preamplifier is connected to the specimen holder in the form of a disk, the diameter of which is 12 mm. When the probe along its surface scanned, the input potential begins to pulsate with a negative polarity. The output of this preamplifier is connected to a small light-emitting diode, which creates intensity-modulated radiation in the chamber. Thus created the light video signal will be picked up by the photomultiplier of the E-T detector. The modes of true SE and BSE are set by applying tens bias volts of various polarities to the specimens or the cage itself.

Application Effect of Feedforward Control in Outpatient Blood Specimen Management

Objective:To analyze the application effect of feedforward control in outpatient blood specimen management.Methods:1,200 patients who had their venous blood collected in outpatient phlebotomy room of our hospital's outpatient clinic from January 2021 to April 2021 were selected as study subjects and divided into 600 cases in the control group and 600 cases in the observation group.The two groups of patients were compared in terms of their satisfaction with the staff,the efficiency of the nurses and the quality of nursing care,turnaround time before specimen analysis,the rejection rate of the blood specimens,and the time of result reporting.Results:After the implementation of feedforward control,patients'satisfaction with staff,nurses work efficiency and quality of care,turnaround time before specimen analysis,specimen rejection rate,and result reporting time in the observation group were significantly higher than those in the control group(P<0.05).Conclusion:The application of feedforward control in the management of outpatient blood specimens has significant effect,which effectively improves patients'satisfaction,enhances the efficiency of nurses and the quality of nursing care,shortens the turnaround time of specimens before analysis and the reporting time of results,and reduces the rejection rate of specimens.

Robotic natural orifice specimen extraction surgery I-type F method vs conventional robotic resection for lower rectal cancer

BACKGROUND Robotic resection using the natural orifice specimen extraction surgery I-type F method(R-NOSES I-F)is a novel minimally invasive surgical strategy for the treatment of lower rectal cancer.However,the current literature on this method is limited to case reports,and further investigation into its safety and feasibility is warranted.AIM To evaluate the safety and feasibility of R-NOSES I-F for the treatment of low rectal cancer.METHODS From September 2018 to February 2022,206 patients diagnosed with low rectal cancer at First Affiliated Hospital of Nanchang University were included in this retrospective analysis.Of these patients,22 underwent R-NOSES I-F surgery(RNOSES I-F group)and 76 underwent conventional robotic-assisted low rectal cancer resection(RLRC group).Clinicopathological data of all patients were collected and analyzed.Postoperative outcomes and prognoses were compared between the two groups.Statistical analysis was performed using SPSS software.RESULTS Patients in the R-NOSES I-F group had a significantly lower visual analog score for pain on postoperative day 1(1.7±0.7 vs 2.2±0.6,P=0.003)and shorter postoperative anal venting time(2.7±0.6 vs 3.5±0.7,P<0.001)than those in the RLRC group.There were no significant differences between the two groups in terms of sex,age,body mass index,tumor size,TNM stage,operative time,intrao-perative bleeding,postoperative complications,or inflammatory response(P>0.05).Postoperative anal and urinary functions,as assessed by Wexner,low anterior resection syndrome,and International Prostate Symptom Scale scores,were similar in both groups(P>0.05).Long-term follow-up revealed no significant differences in the rates of local recurrence and distant metastasis between the two groups(P>0.05).CONCLUSION R-NOSES I-F is a safe and effective minimally invasive procedure for the treatment of lower rectal cancer.It improves pain relief,promotes gastrointestinal function recovery,and helps avoid incision-related complications.

Energy-dispersive X-ray Spectroscopy for the Quantitative Analysis of Pyrite Thin Specimens

To explore ways to improve the accuracy of quantitative analysis of samples in the micrometer to nanometer range of magnitudes,we adopted analytical transmission electron microscopy(AEM/EDS)for qualitative and quantitative analysis of pyrite materials.Additionally,the k factor of pyrite is calculated experimentally.To develop an appropriate non-standard quantitative analysis model for pyrite materials,the experimentally calculated k factor is compared with that estimated from the non-standard quantitative analytical model of the instrument software.The experimental findings demonstrate that the EDS attached to a TEM can be employed for precise quantitative analysis of micro-and nanoscale regions of pyrite materials.Furthermore,it serves as a reference for improving the results of the EDS quantitative analysis of other sulfides.

Statistical Analysis and Countermeasures for Specimen Rejection in the Emergency Department

The rejected specimens from the Emergency Department of the Center of Clinical Laboratory from January 1,2022 to January 1,2023 were analyzed to reduce the specimen rejection rates and to improve the quality of inspection.The results showed that there were 1488 samples of rejected specimens and the non-conforming rate was 0.58%.The departments involved were mainly the Emergency Department,the Hematology Department,the Cardiology Department,the Intensive Care Department,and the Brain Surgery Department.Among the reasons for rejection,blood hemolysis accounted for 43.15%,blood coagulation accounted for 26.61%,and the rate of insufficient specimens was 17.14%.Among them,the sample rejection rate for arterial blood gas analysis was the highest,which accounted for 1.74%;followed by specimens for coagulation test,which was 1.18%.These results indicate the main reason for producing rejected specimens is mainly due to not following the standard operating procedure.Specimen rejection can largely be avoided if the standards for specimen collection are strictly followed.

公安实践教学中数字化标本库的构建与应用

为推进信息化教学的发展,提出在公安实践教学中建设数字化标本库的构想。以虚拟仿真教学中的毒品数字化标本库构建与教学组织应用为例,探讨公安数字化标本库建设可持续发展的路径和内涵,提出适合公安特色数字化标本库内容和标准化建设的建议,采用资源利用、整合、共建等高效节约办法,注重数字化样本库和数据库同步开发使用的发展趋势。数字化标本库具有线上自学、线上线下教学、终身学习等优势,可启发公安教育智慧教学工作高质量发展。

数智化全自动标本转移系统在手术病理标本前处理流程中的应用

目的:探讨在数智化管理背景下,由手术室护士主导的数智化全自动标本转移系统在手术病理标本前处理流程中的应用效果,为提高手术病理标本质量提供参考。方法:构建数智化全自动标本转移系统,并将其应用于手术病理标本前处理流程中,比较系统应用前(2023年4月—7月)和系统应用后(2023年8月—11月)的病理标本送检效率、送检质量、手术室护士心理压力及医护人员满意度。结果:应用数智化全自动标本转移系统后,病理标本前处理流程时长较应用前平均减少3.66 min,一次性接收合格率由87.07%提高至96.42%,病理送检质量满意率较高,护士工作压力显著缓解,医务人员满意度明显提高,以上差异均具有统计学意义(P<0.05)。结论:数智化全自动标本转移系统应用于手术标本前处理流程中可有效提高手术标本前处理效率并缓解护士工作压力,保障病理标本送检质量,为医疗诊断提供可靠的依据,有效减少医务人员职业暴露,提升医护人员满意度。

大红鹳整体骨骼标本的制作与形态学特征

结合传统及改进工艺,采用剥皮、去除内脏、剔肉、拆解、消化、脱脂、漂白、装架、保存等工序制作成年雄性大红鹳(Phoenicopterus roseus)整体骨骼标本。制作时,选用市售84消毒液水溶液进行软组织消化,并在剔肉时保留腕关节、肘关节、膝关节等轴关节处的肌腱组织,在装架完毕后小心剔除,以确保大面积关节接触面或细碎籽骨的精确组装。制作的骨骼标本形态完整、外观莹白,易于长期保存,适宜推广应用。同时在制作过程中,对标本进行系统的形态学观察和描述,发现大红鹳不仅具备鸟类骨骼轻便和坚固的共性,其下颌骨、颈椎及下肢骨也具备适应饮食和涉水生活习性的特性,收集的相关骨骼参数为未来鸟类的骨骼系统研究提供基础数据。

钢管混凝土键连接框架梁和剪力墙的受剪性能

目的 研究钢管混凝土键连接框架梁和剪力墙的受剪性能,为工程应用提供设计依据。方法 应用有限元分析软件ABAQUS对比钢管混凝土键连接与现浇连接梁墙的结构受剪性能,分析前者受剪机理及不同因素对受剪性能的影响。结果 钢管混凝土键连接梁墙的结构承载力和延性系数较现浇结构分别提高约10%和34%;钢材强度从Q235到Q390,初始刚度增加8.44%;截面高度从100 mm到120 mm,延性系数提高17.73%;截面厚度每增加2 mm,承载力提高约15%;截面长度和混凝土强度等级对承载力、初始刚度和延性系数的影响均小于15%,纵向距离对其受剪性能几乎无影响。结论 采用钢管混凝土键连接梁墙的结构总体受剪性能优于现浇结构;钢材强度和截面厚度分别是影响初始刚度和承载力的主要因素。

2015-2021年辽宁省疟疾诊断参比实验室疟疾样本复核结果

目的对2015-2021年辽宁省各地市上报的疟疾病例样本,在省级参比实验室进行检测复核,并根据实验结果评估各地市疟疾诊断参比实验室的疟疾诊断能力,为进一步提升各地市疾病预防控制(疾控)中心疟疾诊断能力提供参考依据。方法对上报的血涂片样本进行镜检复核,疟疾病例的抗凝血样本进行巢式PCR和荧光定量PCR(qPCR)检测,采用χ^(2)检验和Fisher确切概率法对各组间检出率、检出率与上报阳性率间差异进行统计学分析。结果2015-2021年累计复核380份疟疾病例样本,其中恶性疟阳性样本270份,间日疟20份,三日疟11份,卵形疟34份,阴性45份。上报病例样本主要集中在沈阳和大连市,共278份,占全省病例总数的73.16%。对各地市实验室检测的复核结果分析显示,沈阳市检测符合率为95.36%,大连市为92.97%,全省实验室平均符合率为90.13%。比较镜检和巢式PCR 2种方法的结果,巢式PCR检测阳性率为87.63%,血涂片镜检阳性率为74.47%,2种方法检出率差异有统计学意义(χ^(2)=46.296,P<0.001)。结论辽宁省各地市疾控中心在血涂片镜检和核酸检测能力虽然逐步提高,但检测水平不均衡,仍然有较大的提升空间,需继续加强实验室人员检测能力培训,稳固实验室检测队伍人员应有的检测水平,做到送检样本的及时精准检测与反馈,巩固疟疾消除成果。

寄生虫虫卵悬液永久封制玻片标本制作方法探索

目的:探索寄生虫虫卵液永久玻片封制标本的最佳制作方法。方法:在现有研究的基础上,改良虫卵悬液保存配方,再结合不同封片方法制作虫卵玻片标本,保存1 a后,再对其制作效果对进行观察。结果:用体积分数为50%的鸡蛋清、40%的福尔马林、10%的甘油配制的蛋白甘油液保存虫卵,再进行石蜡圈+树胶双封片制作效果最佳。结论:经比较发现虫卵保存液中甘油的含量多少对于虫卵永久封制玻片标本效果的影响很大,其次封制方法对于虫卵液的长期保存也尤为重要。

甲状腺结节大小对超声引导下细针穿刺活检标本质量影响的研究

本研究旨在评估甲状腺结节大小对超声引导下细针穿刺活检(US-FNAB)标本质量的影响。回顾性分析由同一名超声医生独立完成的614例共733个甲状腺结节US-FNAB患者资料,根据甲状腺结节直径分为A组(<5 mm)、B组(5~10 mm)和C组(>10 mm),比较各组间标本不满意率。A组189个结节,不满意率为11.6%(22/189);B组397个结节,不满意率为10.8%(43/397);C组147个结节,不满意率为9.5%(14/147)。三组间US-FNAB标本不满意率比较差异均无统计学意义(P>0.05)。对于一名具有丰富操作经验的医生,甲状腺结节大小不会影响US-FNAB的标本质量。

基于加速加载试验的青川岩改沥青混合料疲劳性能研究

为评价青川岩改沥青混合料疲劳性能,该文设计了基于比例尺为1∶3的路面加速加载试验系统的动轮载三点弯曲加载疲劳试验装置,对双层沥青混合料复合车辙试件进行轮胎碾压下的三点弯曲重复加载疲劳试验,结合沥青混合料小梁试件MTS弯曲疲劳试验,评价青川岩改沥青及复合改性沥青等对沥青混合料疲劳性能的改善效果。结果表明:青川岩改沥青提高了沥青混合料承受重复弯拉荷载的能力,改善了沥青混合料的抗疲劳性能,其抗疲劳性能优于青川岩沥青与SBS复合改性沥青、SBS改性沥青和基质沥青;基于比例尺为1∶3的路面加速加载试验的动轮载三点弯曲重复加载疲劳试验,能更真实地模拟现场路面轮载作用,减少了小梁试件尺寸效应对疲劳寿命的影响,再现了轮载作用下路面结构的受力状况。

上海自然博物馆植物标本室模式标本的整理与分析

为进一步厘清上海自然博物馆植物标本室模式标本的基本情况,促进标本的利用和共享,通过比对馆藏标本与植物标本资源共享平台和植物分类学期刊中模式标本的采集信息,整理出模式标本418份,隶属69科147属239种,其中新发现模式标本390份.本文还对馆藏模式标本的数量、类型、种类组成、优势类群、采集地、采集时间及采集人等进行了统计和分析。

2015-2021年CHINET尿液分离菌分布和耐药性变迁

目的了解2015-2021年CHINET细菌耐药监测网中尿液分离菌的分布和耐药性。方法收集CHINET细菌耐药监测网51家医疗机构2015-2021年所有尿液标本临床分离菌的耐药监测数据资料,采用WHONET 5.6软件进行统计分析。结果2012-2021年尿液标本共分离细菌261893株,其中革兰阳性菌62219株,占23.8%,革兰阴性菌199674株占76.2%。常见的分离菌依次为大肠埃希菌(46.7%)、屎肠球菌(10.4%)、肺炎克雷伯菌(9.8%)、粪肠球菌(8.7%)、奇异变形杆菌(3.5%)、铜绿假单胞菌(3.4%)、无乳链球菌(2.6%)和阴沟肠杆菌(2.1%)。上述细菌主要分离自住院患者,女性多见于男性,成人多见于儿童。大肠埃希菌、肺炎克雷伯菌和奇异变形杆菌中产超广谱β内酰胺酶(ESBL)菌株分别占53.2%、52.8%和37.0%。耐碳青霉烯类的大肠埃希菌、肺炎克雷伯菌、铜绿假单胞菌和鲍曼不动杆菌中检出率分别为1.7%、18.5%、16.4%和40.3%。粪肠球菌对氨苄西林、呋喃妥因、利奈唑胺、万古霉素、替考拉宁和磷霉素的耐药率<10%,屎肠球菌对氨苄西林、左氧氟沙星、红霉素的耐药率>90%,对万古霉素、利奈唑胺和替考拉宁的耐药率<2%。ICU住院患者分离的大肠埃希菌、肺炎克雷伯菌、铜绿假单胞菌和鲍曼不动杆菌对大部分抗菌药物的耐药率明显高于门诊患者和非ICU住院患者。结论尿液标本临床分离菌主要以大肠埃希菌、肠球菌和肺炎克雷伯菌为主,不同人群尿液标本中分离的细菌种类和耐药性不尽相同,应重视细菌耐药监测,减少抗菌药物的不合理使用。