This study investigates the vibration and acoustic properties of porous foam functionally graded(FG)plates under the influence of the temperature field.The dynamics equations of the system are established based on Ham...This study investigates the vibration and acoustic properties of porous foam functionally graded(FG)plates under the influence of the temperature field.The dynamics equations of the system are established based on Hamilton's principle by using the higher-order shear deformation theory under the linear displacement-strain assumption.The displacement shape function is assumed according to the four-sided simply-supported(SSSS)boundary condition,and the characteristic equations of the system are derived by combining the motion control equations.The theoretical model of vibro-acoustic coupling is established by using the acoustic theory and fluid-structure coupling solution method under the simple harmonic acoustic wave.The system's natural frequency and sound transmission loss(STL)are obtained through programming calculations and compared with the literature and COMSOL simulation to verify the validity and reliability of the theoretical model.The effects of various factors,such as temperature,porosity coefficients,gradient index,core thickness,width-to-thickness ratio on the vibration,and STL characteristics of the system,are discussed.The results provide a theoretical basis for the application of porous foam FG plates in engineering to optimize vibration and sound transmission properties.展开更多
In this paper, vibration analysis of irregular-closed-cell foam plates is per- formed. A cell volume distribution coefficient is introduced to modify the original Gibson- Ashby equations of effective Young＇s modulus ...In this paper, vibration analysis of irregular-closed-cell foam plates is per- formed. A cell volume distribution coefficient is introduced to modify the original Gibson- Ashby equations of effective Young＇s modulus of foam materials. A Burr distribution is imported to describe the cell volume distribution situation. Three Burr distribution pa- rameters are obtained and related to the cell volume range and the diversity. Based on the plate theory and the effective modulus theory, the natural frequency of foam plates is calculated with the change of the cell volume distribution parameters. The relationship between the frequencies and the cell volumes are derived. The scale factor of the average cell size is introduced and proved to be an important factor to the performance of the foam plate. The result is shown by the existing theory of size effects. It is determined that the cell volume distribution has an impact on the natural frequency of the plate structure based on the cell volume range, the diversity, and the average size, and the impact can lead to optimization of the synthesis procedure.展开更多
炼化企业中,戊烷发泡剂可以利用预加氢装置拔出的轻石脑油组分进行生产,而国家标准GB T 22053—2020对发泡剂质量要求更加严格。通过构建预加氢装置汽提塔、分馏塔及脱戊烷塔的ASPEN PLUS模型,对戊烷发泡剂生产流程的控制参数进行分析测...炼化企业中,戊烷发泡剂可以利用预加氢装置拔出的轻石脑油组分进行生产,而国家标准GB T 22053—2020对发泡剂质量要求更加严格。通过构建预加氢装置汽提塔、分馏塔及脱戊烷塔的ASPEN PLUS模型,对戊烷发泡剂生产流程的控制参数进行分析测算,制定了生产调整方案。工业试验结果表明:戊烷发泡剂组成与脱戊烷塔塔顶灵敏板温度密切相关,保证塔顶发泡剂组分质量分数差值范围为±2%,其塔顶温度变化需控制±0.3℃。同时,从汽提塔操作、产品牌号、加工原油种类等方面入手,对戊烷发泡剂增产效果进行分析,提高企业的经济效益。展开更多
In order to obtain substrates with good conductive foam for high porosity foam metal materials used in the metal electrodes,the technique of electroless copper plating on the microcellular polyurethane foam with pore ...In order to obtain substrates with good conductive foam for high porosity foam metal materials used in the metal electrodes,the technique of electroless copper plating on the microcellular polyurethane foam with pore size of 0.3 mm was investigated.The main factors affecting the deposition rate such as the solution composition,temperature,pH value and adding ultrasonic were explored.The results show that the optimum process conditions are CuSO4 16 g/L,HCHO 5 mL/L,NaKC4H4O6 30 g/L,Na2EDTA 20 g/L,K4Fe(CN)6 25 mg/L,pH value of 12.5-13.0 and temperature of 40-50℃.Under these technical conditions, the process has excellent bath stability.Adding ultrasonic on the process can elevate the deposition rate of copper by 20%-30%.The foam metal material with a porosity of 92.2%and a three-dimensional network structure,was fabricated by electro-deposition after the electroless copper plating.展开更多
The electrochemical method was used to remove nickel ion from spent electroless nickel plating bath (pH=5 3). An electrolytic cell was composed of a porous nickel foam cathode and an inert RuO 2/Ti anode. Nickel ions ...The electrochemical method was used to remove nickel ion from spent electroless nickel plating bath (pH=5 3). An electrolytic cell was composed of a porous nickel foam cathode and an inert RuO 2/Ti anode. Nickel ions were reduced and deposited on the surface of the nickel foam cathode. The effect of current density (i), linear velocity of wastewater(v), gap between cathode and anode(d C/A) and reaction time(t) on nickel removal rate and current efficiency were studied. As reaction time prolonged, nickel removal rate increased while current efficiency decreased. And larger v and smaller d C/A can enhance nickel removal rate and increase current efficiency by promoting mass transfer and dropping concentration polarization. The effect of current density on nickel removal by electrochemistry was related to other parameters. After three hours’ electrolysis with i=1 0 A/dm2, v=18 5 cm/min and d C/A=0 5 cm, nickel removal rate and current efficiency reached 85 6% and 29 1%, respectively.展开更多
Mg/Ni hybrid foams were fabricated by the electroless method.The Ni-P(Nickel-Phosphorous)coatings were deposited on the surface of closed-cell Mg alloy foams.The composition,microstructure and phases of the Ni-P coati...Mg/Ni hybrid foams were fabricated by the electroless method.The Ni-P(Nickel-Phosphorous)coatings were deposited on the surface of closed-cell Mg alloy foams.The composition,microstructure and phases of the Ni-P coatings were characterized by scanning electron microscopy(SEM),energy-dispersive X-ray spectroscopy(EDS)and X-ray diffraction(XRD),respectively.The compressive tests were performed on the Mg/Ni hybrid foams at 400℃using the Mg alloy foams as a reference.The experimental results show that the yield strength,plateau stress and energy absorption capacity of the closed-cell Mg alloy foams at high temperature were improved by the Ni-P coating.And there are four main modes for the Mg/Ni hybrid foam failure at 400℃,i e,shearing in cell wall,bending in cell edge,shedding and cracking in Ni-P coating.展开更多
基金Project supported by the National Natural Science Foundation of China(No.11972082)。
文摘This study investigates the vibration and acoustic properties of porous foam functionally graded(FG)plates under the influence of the temperature field.The dynamics equations of the system are established based on Hamilton's principle by using the higher-order shear deformation theory under the linear displacement-strain assumption.The displacement shape function is assumed according to the four-sided simply-supported(SSSS)boundary condition,and the characteristic equations of the system are derived by combining the motion control equations.The theoretical model of vibro-acoustic coupling is established by using the acoustic theory and fluid-structure coupling solution method under the simple harmonic acoustic wave.The system's natural frequency and sound transmission loss(STL)are obtained through programming calculations and compared with the literature and COMSOL simulation to verify the validity and reliability of the theoretical model.The effects of various factors,such as temperature,porosity coefficients,gradient index,core thickness,width-to-thickness ratio on the vibration,and STL characteristics of the system,are discussed.The results provide a theoretical basis for the application of porous foam FG plates in engineering to optimize vibration and sound transmission properties.
基金Project supported by the National Natural Science Foundation of China(No.90916007)
文摘In this paper, vibration analysis of irregular-closed-cell foam plates is per- formed. A cell volume distribution coefficient is introduced to modify the original Gibson- Ashby equations of effective Young＇s modulus of foam materials. A Burr distribution is imported to describe the cell volume distribution situation. Three Burr distribution pa- rameters are obtained and related to the cell volume range and the diversity. Based on the plate theory and the effective modulus theory, the natural frequency of foam plates is calculated with the change of the cell volume distribution parameters. The relationship between the frequencies and the cell volumes are derived. The scale factor of the average cell size is introduced and proved to be an important factor to the performance of the foam plate. The result is shown by the existing theory of size effects. It is determined that the cell volume distribution has an impact on the natural frequency of the plate structure based on the cell volume range, the diversity, and the average size, and the impact can lead to optimization of the synthesis procedure.
文摘炼化企业中,戊烷发泡剂可以利用预加氢装置拔出的轻石脑油组分进行生产,而国家标准GB T 22053—2020对发泡剂质量要求更加严格。通过构建预加氢装置汽提塔、分馏塔及脱戊烷塔的ASPEN PLUS模型,对戊烷发泡剂生产流程的控制参数进行分析测算,制定了生产调整方案。工业试验结果表明:戊烷发泡剂组成与脱戊烷塔塔顶灵敏板温度密切相关,保证塔顶发泡剂组分质量分数差值范围为±2%,其塔顶温度变化需控制±0.3℃。同时,从汽提塔操作、产品牌号、加工原油种类等方面入手,对戊烷发泡剂增产效果进行分析,提高企业的经济效益。
文摘In order to obtain substrates with good conductive foam for high porosity foam metal materials used in the metal electrodes,the technique of electroless copper plating on the microcellular polyurethane foam with pore size of 0.3 mm was investigated.The main factors affecting the deposition rate such as the solution composition,temperature,pH value and adding ultrasonic were explored.The results show that the optimum process conditions are CuSO4 16 g/L,HCHO 5 mL/L,NaKC4H4O6 30 g/L,Na2EDTA 20 g/L,K4Fe(CN)6 25 mg/L,pH value of 12.5-13.0 and temperature of 40-50℃.Under these technical conditions, the process has excellent bath stability.Adding ultrasonic on the process can elevate the deposition rate of copper by 20%-30%.The foam metal material with a porosity of 92.2%and a three-dimensional network structure,was fabricated by electro-deposition after the electroless copper plating.
文摘The electrochemical method was used to remove nickel ion from spent electroless nickel plating bath (pH=5 3). An electrolytic cell was composed of a porous nickel foam cathode and an inert RuO 2/Ti anode. Nickel ions were reduced and deposited on the surface of the nickel foam cathode. The effect of current density (i), linear velocity of wastewater(v), gap between cathode and anode(d C/A) and reaction time(t) on nickel removal rate and current efficiency were studied. As reaction time prolonged, nickel removal rate increased while current efficiency decreased. And larger v and smaller d C/A can enhance nickel removal rate and increase current efficiency by promoting mass transfer and dropping concentration polarization. The effect of current density on nickel removal by electrochemistry was related to other parameters. After three hours’ electrolysis with i=1 0 A/dm2, v=18 5 cm/min and d C/A=0 5 cm, nickel removal rate and current efficiency reached 85 6% and 29 1%, respectively.
基金Funded by the National Natural Science Foundation of China(Nos.51874093,51174060,and 51661031)the Fundamental Research Funds for the Central Universities(N182504015)the Liaoning Province Key r&d Project(No.2019JH2/10100008)。
文摘Mg/Ni hybrid foams were fabricated by the electroless method.The Ni-P(Nickel-Phosphorous)coatings were deposited on the surface of closed-cell Mg alloy foams.The composition,microstructure and phases of the Ni-P coatings were characterized by scanning electron microscopy(SEM),energy-dispersive X-ray spectroscopy(EDS)and X-ray diffraction(XRD),respectively.The compressive tests were performed on the Mg/Ni hybrid foams at 400℃using the Mg alloy foams as a reference.The experimental results show that the yield strength,plateau stress and energy absorption capacity of the closed-cell Mg alloy foams at high temperature were improved by the Ni-P coating.And there are four main modes for the Mg/Ni hybrid foam failure at 400℃,i e,shearing in cell wall,bending in cell edge,shedding and cracking in Ni-P coating.
