The development, production and application of top high-grade non-grain-oriented （NGO） silicon steels at Baosteel were introduced in this paper. Top high grades refer to the highest grades in the intemational silico...The development, production and application of top high-grade non-grain-oriented （NGO） silicon steels at Baosteel were introduced in this paper. Top high grades refer to the highest grades in the intemational silicon steel product standard and above. B35A230 and B50A250 were developed at Baosteel in 2009 and have been used in inverter compressors for air-conditioners, small transformers and big hydropower generators in the Three Gorges project. Small- batch production of B35A210 and B50A230, which exceed the highest grades listed in the intemational silicon steel product standard,began in 2010. That was a breakthrough in the silicon steel making history in China. Presently,Baosteel＇ s high- grade NGO products have passed the strict qualifications of the three major electric power equipment manufacturers in China and the leading international power equipment suppliers like ALSTOM, GE, SIEMENS, VESTAS, etc. These products are characterized by low iron loss, low anisotropy, good punchability and a high lamination factor. They have been used in the 770 MW hydropower generator at Xiluodu Power Station in the three gorges area, 1 000 MW thermal power generators and 2.5 MW wind power generators.展开更多
Effect of thermal annealing on the upgraded metallurgical grade（UMG）-Si was investigated under different conditions.The dislocation,grain boundaries and preferred growth orientation of Si ingot were characterized by...Effect of thermal annealing on the upgraded metallurgical grade（UMG）-Si was investigated under different conditions.The dislocation,grain boundaries and preferred growth orientation of Si ingot were characterized by optical microscopy,electron back scattering diffraction（EBSD） and X-ray diffractometry（XRD）,respectively.The arrange order of dislocation density of Si ingot is from the lowest in the middle to the lower in the bottom and low in the top before and after annealing.And it decreases gradually with increase of the annealing temperature.The number of small angle grain boundaries declines gradually until disappears whereas the proportion of coincidence site lattice（CSL） grain boundaries increases firstly and then decreases.The twin boundary Σ3 reaches the highest proportion of 28% after annealing at 1 200 ℃ for 3 h.Furthermore,the crystal grains in different positions gain the best preferred growth orientation,which can promote the following machining of Si ingot and the conversion efficiency of solar cells.展开更多
Using the commercial seeds of two hybrid rice varieties including Lu- liangyou 996 and Liangyoupeijiu as the materials, four specific gravity-based seed grading treatments, Le., the specific gravity of 〈1.0 （T1）, 1...Using the commercial seeds of two hybrid rice varieties including Lu- liangyou 996 and Liangyoupeijiu as the materials, four specific gravity-based seed grading treatments, Le., the specific gravity of 〈1.0 （T1）, 1.0-1.09 （T2）, 1.1-1.19（T3） and ≥1.2 （T4）, by selection with different saline solutions, and the control without seed grading （CK） were designed to study the effects of seed grading on seed germination, seedling emergence, seedling quality and grain yield. The results showed that the treatments of T2, T3 and T4 had higher or significantly higher seed germination rate, germination index and vigor index, seedling emergence rate and adult seedling rate than the CK, while T1 had significantly lower values of these traits than the CK. Compared with the CK, the number of spikelets per pani- cle was found to be the main reason for the yield increase of these treatments with high seed viability.展开更多
A graded structural material(GSM)with a material transition from TA15 to TC11 was fabricated by wire arc additive manufacturing(WAAM)method.The grain morphology,chemical composition,microstructure and mechanical prope...A graded structural material(GSM)with a material transition from TA15 to TC11 was fabricated by wire arc additive manufacturing(WAAM)method.The grain morphology,chemical composition,microstructure and mechanical properties of the as-deposited GSM were all characterized to investigate their variations along the deposition direction.The results indicate that from TA15 to TC11,the grain size decreases and a transition from columnar grains to equiaxed grains occurs.The content of alloy element alters greatly within a short distance,and the width of the mutation zone is 800μm.Both TA15 and TC11 regions exhibit basketweave microstructure withα-phase andβ-phase.However,during the transition from TA15 to TC11,theα-lath becomes fine,which leads to an increase in microhardness.The tensile test shows that the bonding strength at the interface is higher than the longitudinal strength of TA15,and the lateral elongation at the interface is higher than that of TA15 and TC11.展开更多
X65, X70, and X80 belong to high grade pipeline steels. Toughness is one of the most important properties of pipeline steels when the pipeline transports the gas or oil, and the means to control toughness is very impo...X65, X70, and X80 belong to high grade pipeline steels. Toughness is one of the most important properties of pipeline steels when the pipeline transports the gas or oil, and the means to control toughness is very important for exploring even higher grade pipeline steels. We established the relationship between toughness and crystallographic parameters of high grade pipeline steels by studying the crystallographic parameters of X65, X70, and X80 using EBSD and analyzing Charpy CVN of X65, X70 and X80. The results show that the effective grain size, the frequency distribution of grain boundary misorientation and the ratio of high angle grain boundary to small angle grain boundary are important parameters. The finer the effective grain size, and the higher the frequency distribution of grain boundaries （〉 50~）, the more excellent toughness of high grade pipeline steels will be.展开更多
The Wesel-Xanten stretch of the fiver Rhine between km-812.5 and km-821.5 is one of the reaches where strong erosion leads to high maintenance efforts conceming navigability.In order to improve the naviga- tion condit...The Wesel-Xanten stretch of the fiver Rhine between km-812.5 and km-821.5 is one of the reaches where strong erosion leads to high maintenance efforts conceming navigability.In order to improve the naviga- tion conditions without aggravating the flood protection,but also ensuring that the ecological system of the river is not damaged,investigations of the morphodynamical processes in connection with artificial grain feeding ac- tivities have to be carried out by Federal Waterways Engineering and Research...展开更多
To find out the spatial pattern of comprehensive grain potential,we chose α,R i,Y i from the research output of farmland grading and took them as the basic data; using the Aggregated Advantage Indices and hierarchica...To find out the spatial pattern of comprehensive grain potential,we chose α,R i,Y i from the research output of farmland grading and took them as the basic data; using the Aggregated Advantage Indices and hierarchical cluster analysis methods,finally regionalized all the12 counties into 4 regions: I High potential-regions easy to be mined in the short term,II High potential-regions that can be mined in the long term,III Low potential-regions easy to be mined in the short term,IV Low potential-regions difficult to be mined in the long term. From the study results,we also find out that the Scale Advantage Indices of farmland( SAI) has a strong positive effect on the Aggregated Advantage Indices of grain potential( AAI),so we conclude that it is necessary to maintain and increase a certain amount of farmland area to ensure the regional grain production capacity.展开更多
文摘The development, production and application of top high-grade non-grain-oriented （NGO） silicon steels at Baosteel were introduced in this paper. Top high grades refer to the highest grades in the intemational silicon steel product standard and above. B35A230 and B50A250 were developed at Baosteel in 2009 and have been used in inverter compressors for air-conditioners, small transformers and big hydropower generators in the Three Gorges project. Small- batch production of B35A210 and B50A230, which exceed the highest grades listed in the intemational silicon steel product standard,began in 2010. That was a breakthrough in the silicon steel making history in China. Presently,Baosteel＇ s high- grade NGO products have passed the strict qualifications of the three major electric power equipment manufacturers in China and the leading international power equipment suppliers like ALSTOM, GE, SIEMENS, VESTAS, etc. These products are characterized by low iron loss, low anisotropy, good punchability and a high lamination factor. They have been used in the 770 MW hydropower generator at Xiluodu Power Station in the three gorges area, 1 000 MW thermal power generators and 2.5 MW wind power generators.
基金Project(SKL2009-8)supported by the State Key Laboratory of Silicon Materials,Zhejiang University,ChinaProject(NCET-07-0387)supported by the New Century Excellent Researcher Award Program from Ministry of Education of China
文摘Effect of thermal annealing on the upgraded metallurgical grade（UMG）-Si was investigated under different conditions.The dislocation,grain boundaries and preferred growth orientation of Si ingot were characterized by optical microscopy,electron back scattering diffraction（EBSD） and X-ray diffractometry（XRD）,respectively.The arrange order of dislocation density of Si ingot is from the lowest in the middle to the lower in the bottom and low in the top before and after annealing.And it decreases gradually with increase of the annealing temperature.The number of small angle grain boundaries declines gradually until disappears whereas the proportion of coincidence site lattice（CSL） grain boundaries increases firstly and then decreases.The twin boundary Σ3 reaches the highest proportion of 28% after annealing at 1 200 ℃ for 3 h.Furthermore,the crystal grains in different positions gain the best preferred growth orientation,which can promote the following machining of Si ingot and the conversion efficiency of solar cells.
基金Supported by Special Scientific Research Fund of Agricultural Public Welfare Profession of China(201303002,201203052)Key Project of Education Department of Hunan Province(14A073)~~
文摘Using the commercial seeds of two hybrid rice varieties including Lu- liangyou 996 and Liangyoupeijiu as the materials, four specific gravity-based seed grading treatments, Le., the specific gravity of 〈1.0 （T1）, 1.0-1.09 （T2）, 1.1-1.19（T3） and ≥1.2 （T4）, by selection with different saline solutions, and the control without seed grading （CK） were designed to study the effects of seed grading on seed germination, seedling emergence, seedling quality and grain yield. The results showed that the treatments of T2, T3 and T4 had higher or significantly higher seed germination rate, germination index and vigor index, seedling emergence rate and adult seedling rate than the CK, while T1 had significantly lower values of these traits than the CK. Compared with the CK, the number of spikelets per pani- cle was found to be the main reason for the yield increase of these treatments with high seed viability.
基金financial supports from the National Natural Science Foundation of China(Nos.51875041,51875042)。
文摘A graded structural material(GSM)with a material transition from TA15 to TC11 was fabricated by wire arc additive manufacturing(WAAM)method.The grain morphology,chemical composition,microstructure and mechanical properties of the as-deposited GSM were all characterized to investigate their variations along the deposition direction.The results indicate that from TA15 to TC11,the grain size decreases and a transition from columnar grains to equiaxed grains occurs.The content of alloy element alters greatly within a short distance,and the width of the mutation zone is 800μm.Both TA15 and TC11 regions exhibit basketweave microstructure withα-phase andβ-phase.However,during the transition from TA15 to TC11,theα-lath becomes fine,which leads to an increase in microhardness.The tensile test shows that the bonding strength at the interface is higher than the longitudinal strength of TA15,and the lateral elongation at the interface is higher than that of TA15 and TC11.
基金Funded by China Postdoctoral Science Foundation(No.20060390319)
文摘X65, X70, and X80 belong to high grade pipeline steels. Toughness is one of the most important properties of pipeline steels when the pipeline transports the gas or oil, and the means to control toughness is very important for exploring even higher grade pipeline steels. We established the relationship between toughness and crystallographic parameters of high grade pipeline steels by studying the crystallographic parameters of X65, X70, and X80 using EBSD and analyzing Charpy CVN of X65, X70 and X80. The results show that the effective grain size, the frequency distribution of grain boundary misorientation and the ratio of high angle grain boundary to small angle grain boundary are important parameters. The finer the effective grain size, and the higher the frequency distribution of grain boundaries （〉 50~）, the more excellent toughness of high grade pipeline steels will be.
文摘The Wesel-Xanten stretch of the fiver Rhine between km-812.5 and km-821.5 is one of the reaches where strong erosion leads to high maintenance efforts conceming navigability.In order to improve the naviga- tion conditions without aggravating the flood protection,but also ensuring that the ecological system of the river is not damaged,investigations of the morphodynamical processes in connection with artificial grain feeding ac- tivities have to be carried out by Federal Waterways Engineering and Research...
文摘To find out the spatial pattern of comprehensive grain potential,we chose α,R i,Y i from the research output of farmland grading and took them as the basic data; using the Aggregated Advantage Indices and hierarchical cluster analysis methods,finally regionalized all the12 counties into 4 regions: I High potential-regions easy to be mined in the short term,II High potential-regions that can be mined in the long term,III Low potential-regions easy to be mined in the short term,IV Low potential-regions difficult to be mined in the long term. From the study results,we also find out that the Scale Advantage Indices of farmland( SAI) has a strong positive effect on the Aggregated Advantage Indices of grain potential( AAI),so we conclude that it is necessary to maintain and increase a certain amount of farmland area to ensure the regional grain production capacity.
