Simplified quantitative analysis method and its application in the insitu synthesized copper-based azide chips

Copper-based azide(Cu(N_(3))2 or CuN_(3),CA)chips synthesized by in-situ azide reaction and utilized in miniaturized explosive systems has become a hot research topic in recent years.However,the advantages of in-situ synthesis method,including small size and low dosage,bring about difficulties in quantitative analysis and differences in ignition capabilities of CA chips.The aim of present work is to develop a simplified quantitative analysis method for accurate and safe analysis of components in CA chips to evaluate and investigate the corresponding ignition ability.In this work,Cu(N_(3))2 and CuN_(3)components in CA chips were separated through dissolution and distillation by utilizing the difference in solubility and corresponding content was obtained by measuring N_(3)-concentration through spectrophotometry.The spectrophotometry method was optimized by studying influencing factors and the recovery rate of different separation methods was studied,ensuring the accuracy and reproducibility of test results.The optimized method is linear in range from 1.0-25.0 mg/L,with a correlation coefficient R^(2)=0.9998,which meets the requirements of CA chips with a milligram-level content test.Compared with the existing ICP method,component analysis results of CA chips obtained by spectrophotometry are closer to real component content in samples and have satisfactory accuracy.Moreover,as its application in miniaturized explosive systems,the ignition ability of CA chips with different component contents for direct ink writing CL-20 and the corresponding mechanism was studied.This study provided a basis and idea for the design and performance evaluation of CA chips in miniaturized explosive systems.

Rapid fabrication of modular 3D paper-basedmicrofluidic chips using projection-based 3D printing

Paper-based microchips have different advantages,such as better biocompatibility,simple production,and easy handling,making them promising candidates for clinical diagnosis and other fields.This study describes amethod developed to fabricate modular three-dimensional(3D)paper-based microfluidic chips based on projection-based 3D printing(PBP)technology.A series of two-dimensional(2D)paper-based microfluidic modules was designed and fabricated.After evaluating the effect of exposure time on the accuracy of the flow channel,the resolution of this channel was experimentally analyzed.Furthermore,several 3D paper-based microfluidic chips were assembled based on the 2D ones using different methods,with good channel connectivity.Scaffold-based 2D and hydrogel-based 3D cell culture systems based on 3D paper-based microfluidic chips were verified to be feasible.Furthermore,by combining extrusion 3D bioprinting technology and the proposed 3D paper-based microfluidic chips,multiorgan microfluidic chips were established by directly printing 3D hydrogel structures on 3D paperbased microfluidic chips,confirming that the prepared modular 3D paper-based microfluidic chip is potentially applicable in various biomedical applications.

Combination of Micro-fluidic Chip with Fluorescence Correlation Spectroscopy for Single Molecule Detection

A single molecule detection technique was developed by the combination of a single channel poly （dimethylsiloxane）/glass micro-fluidic chip and fluorescence correlation spectroscopy （FCS）. This method was successfully used to determine the proportion of two model components in the mixture containing fluorescein and the rhodamine-green succinimidyl ester.

Research of Confocal Laser Induced Fluorescence Detection System for Micro-fluidic Chip

The characteristics such as signal noise ratio（SNR） and sensitivity of the fluorescence detection system for micro-fluidic chip influence the performance of the whole system extremely. The confocal laser induced fluorescence detection system is presented. Based on the debugging of optical and circuit modules, the results of detecting the samples are given and analyzed theoretically, and the improved project is put forward.

社会资本与中国农村养老保险——基于CHIPS数据的实证研究

党的十八大以来,习近平总书记多次发表重要论述,阐明自己的"民生观",指出中国养老问题的重要性。改革开放以来,中国经济、社会、政治都发生了巨大变化。福利一词也越来越多为人所谈论。本文以农村养老保险为切入口,研究社会资本、党员身份与农村养老保险的参与程度、知情程度、未来参与意愿之间的关系,从一个侧面反映中国农村的福利情况。通过文献综述,提出了六个假设。根据中国家庭收入调查(CHIPS)数据,建立Logistic回归模型,发现社会资本对是否参加农村养老保险、是否知道个人账户有多少钱、将来是否加入农村养老保险都有积极作用;党员身份与是否参加农村养老保险、是否知道自己的个人账户有多少钱、将来是否可能参加无关。结果表明,提高村民的社会资本,加强他们的社会交往有助于他们获取信息,改善福利,所以可以提高村民小组活动和村民大会的频率以增加农民的社会资本。

CHIPS教学理念在药理学教学中的应用

CHIPS是一种新型的培养教育模式,通过CHIPS培养模式不仅提高了药理学教师的教学业务水平,更是培养学生在药理学课程学习过程中的自学能力、科研思维和创新能力。

耐甲氧西林金黄色葡萄球菌CHIPS基因的克隆、序列分析及原核表达

目的对耐甲氧西林金黄色葡萄球菌(MRSA)趋化抑制蛋白(CHIPS)进行扩增、克隆、序列分析、原核表达及纯化,为后续的疫苗研究奠定基础。方法根据GenBank中趋化抑制蛋白(CHIPS)的序列,设计一对特异性引物,以耐甲氧西林金黄色葡萄球菌DNA为模板PCR扩增CHIPS基因,纯化DNA进行EcoRI、XhoI双酶切鉴定及测序鉴定,并将CHIPS亚克隆入表达载体PET-28α,转化感受态大肠杆菌BL21,对质粒进行双酶切鉴定及基因序列分析,用IPTG诱导表达重组蛋白,His标签单克隆抗体进行免疫印迹验证重组蛋白的表达。结果以金黄色葡萄球菌临床儿童分离株基因组为模板,成功扩增CHIPS基因,基因大小为450bp;重组PET-28a(+)-CHIPS双酶切鉴定可见目的片段,测序结果显示CHIPS在正确读框中,序列比对分析显示其与相关报道核苷酸序列一致性达99.98%。经IPTG诱导后,pET-28a(+)-CHIPS/BL21在相应分子量(17kDa)可见融合蛋白在上清表达,免疫印迹检测到目的蛋白。结论成功从儿童分离株MRSA中构建了CHIPS的原核表达系统,并成功在大肠杆菌BL21中融合表达,为后续的疫苗研究奠定基础。

CHIPS教学理念在药理学教学中的探索和实践

为了加强高等医药院校人才素质的培养,通过CHIPS教学理念在药理学教学中的探索和实践,促进药理学教学理念的更新和教学质量的提高,从而培养具有创新精神、较强的动手能力和主动性的富有潜力的、服务于社会的药学人才。

Microstructure evolution of hot pressed AZ91D alloy chips reheated to semi-solid state

AZ91D magnesium alloy chips, which were directly collected on the spot of machining process, were recycled to prepare billet via hot pressing for semi-solid processing. The semi-solid microstructure evolution of the billet during reheating was investigated. The results indicate that there are three stages during reheating to semi-solid state: the dissolution of Mg17Al12 and diffusion of Al into α-Mg matrix, the melting of the region with high content of solute and formation of isolated solid particles, and spheroidization and growth of solid particles. Meanwhile, a number of entrapped liquid droplets form within solid particles. In addition, the number and size of entrapped liquid droplets rely on the holding time in the semi-solid temperature range. With increasing isothermal holding time, the solid fraction remains unchanged when the solid-liquid system reaches the dynamic equilibrium at last, while the solid particles become more globular and the average size of solid particles increases owing to the decreasing of interfacial energy and the effect of interfacial tension.

世界性的资金调拨系统——CHIPS

第二次世界大战后,商品生产的规模和交换方式都发生了很大的变化。科学技术的发展,促使劳动生产率迅速提高和国际贸易急速发展,从而使商品流动和货币流动急速加大。通过电信和手工处理纸基票证这种传统的转帐方式,已经不能适应时代发展的要求。为适应国际贸易急速发展的需要,从60年代末开始,国际银行界纷纷研究建立各种国际资金调拨系统。在诸多国际资金调拨系统中,最重要的是SWIFT系统和CHIPS系统。SWIFT系统主要提供通信服务,为其成员金融机构传送各种标准的国际资金调拨信息。

CHIP相关基因与MPN患者心脑血管事件的风险分析

目的:分析骨髓增殖性肿瘤(MPN)患者不确定潜能的克隆性造血(CHIP)相关基因突变谱和临床特征,探讨CHIP相关基因与其心脑血管事件(CCE)的相关性及可能作用机制。方法:回顾性分析2019年8月-2022年7月首都医科大学附属北京安贞医院血液科收治的73例MPN患者的临床资料和二代测序结果,采用Logistic回归分析CHIP相关基因、炎症细胞因子对MPN患者CCE的影响。结果:55例(75.3%)MPN患者检出CHIP相关基因,原发性血小板增多症(ET)和真性红细胞增多症(PV)患者CHIP相关基因各突变频率差异无统计学意义。CHIP相关基因突变以单基因形式为主,检出率从高至低依次为JAK2V617F(63.0%,46/73)、ASXL1(16.4%,12/73)、TET2(11.0%,8/73)、DNMT3A(9.6%,7/73)、SRSF2(6.9%,5/73)、SF3B1(4.1%,3/73)、TP53(1.4%,1/73)和PPMID(1.4%,1/73)。年龄>60岁患者CHIP相关基因检出率明显高于≤60岁者[91.7%(33/36)vs 59.5%(22/37)]。27例(37.0%)MPN患者伴CCE(MPN/CCE),2次CCE者5例,均为动脉事件。CCE组患者年龄(62.8±12.8 vs 53.9±15.8岁,P=0.015)、IL-1β水平(17.7±26.0vs 4.3±8.6,P=0.012)、IL-8水平(360.7±598.6 vs 108.3±317.0,P=0.045)、血栓形成史(29.6%vs 2.2%,P=0.020)和CHIP相关基因检出率(88.9%vs 67.4%,P=0.040)高于无CCE组。多因素Logistic回归分析结果显示,年龄(OR=0.917,95%CI:0.843-0.999,P=0.047)、血栓形成史(OR=34.148,95%CI:2.392-487.535,P=0.009)、任何1个CHIP相关基因突变(OR=16.065,95%CI:1.217-212.024,P=0.035)和IL-1β水平升高(OR=0.929,95%CI:0.870-0.992,P=0.027)均是MPN/CCE的独立危险因素;CHIP相关单基因突变与MPN/CCE无关,但DNMT3A(OR=88.717,95%CI:2.690-292.482,P=0.012)、ASXL1(OR=7.941,95%CI:1.045-60.353,P=0.045)突变是PV/CCE的独立危险因素。结论:MPN患者CHIP相关基因突变率高,尤其是60岁以上患者;高龄、血栓形成史、CHIP相关基因突变和IL-1β水平升高是MPN发生CCE的独立危险因素。DNMT3A、ASXL1单基因突变是PV患者CCE的独立危险因素。CHIP相关基因突变及炎症细胞因子IL-1β升高是MPN新的CCE危险因素。

Study on Ignition Proof AZ91D Magnesium Alloy Chips with Cerium Addition

The effect of Ce on ignition point of AZ91D magnesium alloy chips was studied. For the AZ91D and the AZ91D-xCe magnesium alloys, changing the sizes of the chips in the range of 58 - 270 μm has a limited influence on ignition point, however, the shift of the content of Ce has much effect on ignition point. Increasing the Ce content, x from 0.15 to 0.25, the ignition point increases with increasing of Ce; however, x from 0.25 to 0.45, the ignition point decreases with increasing of Ce. By the addition of Ce of 0.25 %. the ignition point is raised by 43℃.

金黄色葡萄球菌CHIPS基因克隆及原核表达

趋化抑制蛋白(Chemotaxis Inhibitory Protein ofStaphylococcus aureus,CHIPS)是由金黄色葡萄球菌分泌到菌体外的一种蛋白。在感染早期,它能特异性地与中性粒细胞和单核细胞上的C5a受体(C5aR)和fMLP受体(FPR)结合,从而阻止中性粒细胞和单核细胞对C5a和fMLP的结合作用,导致对病原吞噬作用的延迟。人们可以利用CHIPS对C5a-C5aR的阻止作用来研制治疗由C5a诱发的炎症性疾病的药物。将CHIPS作为免疫原防治疾病也将成为新的研究课题。实验成功构建了CHIPS蛋白的原核表达系统,为CHIPS免疫原性研究及蛋白的其他功能研究奠定了基础。

Comparison of a commercial powder and a powder produced from Ti–6Al–4V chips and their effects on compacts sintered by the sinter-HIP method

The present paper is related to the conversion of Ti–6Al–4V chips into powder and investigates the usability of the produced powder in powder metallurgy applications. In this regard, a disc-milling process was applied to Ti–6Al–4V chips and the obtained powder was subsequently compacted. The compacted samples were sintered by the sinter hot isostatic pressing (sinter-HIP) method at 1200°C under high vacuum, their mechanical properties and microstructure were investigated and compared with those of commercial powder compacts subjected to the same preparation processes. The results showed that the produced powder exhibits greater flowability and higher apparent density than the commercial powder. However, the sintered products prepared from the commercial powder exhibited a higher relative density, lower porosity, and, as a result, greater flexural strength compared with the sintered compacts prepared from the produced powder. In addition, transgranular fracture was greater in the sintered products of the commercial powder. The microstructural studies revealed that the sintered products made from both the commercial and the produced powders consisted of α- and β-phase but contained more α-phase. All of the examined properties were found to be substantially affected by the particle size of the powders.

Lathe process of AZ91D magnesium alloy chips used in semi-solid thixomolding

Based on the mechanism of chip breaking and the principle of semi-solid thixomolding, the lathe process of AZ91D magnesium alloys chips used in semi-solid thixotropic injection molding process was studied. With three kinds of turning tools, such as 31303C5, 31003C and 31303C, different chips were gotten. And by one tool with different lathe parameters, different chips were gotten. The results show that, under the needed condition of the thixotropic injection molding machine, the ideal chips are gotten and the size of magnesium alloy chips must be about 35mm, and the turning tool is chosen, whose chip breaker groove is narrower and the depth of cutting is more than 3mm as well as the amount of feed is larger than 0.3mm. The deformation occurs on the microstructure of the chips, and the residual stress is important to the later microstructure of semi-solid state in injection molding.

Measurement of 3db Bandwidth of Laser Diode Chips

An accurate technique for measuring the frequency response of semiconductor laser diode chips is proposed and experimentally demonstrated.The effects of test jig parasites can be completely removed in the measurement by a new calibration method.In theory,the measuring range of the measurement system is only determined by the measuring range of the instruments network analyzer and photo detector.Diodes' bandwidth of 7 5GHz and 10GHz is measured.The results reveal that the method is feasible and comparing with other method,it is more precise and easier to use.

Mechanical properties and microstructure of composites produced by recycling metal chips

In this study, the processing and mechanical properties of porous metal matrix composites(MMCs) composed of spheroidal cast iron chips(GGG40) and bronze chips(CuSn10) and formed by hot isostatic pressing were investigated. Bronze chips(CuSn10) were used as a matrix component, and spheroidal cast iron(GGG40) chips were used as a reinforcement component. The MMCs were produced with different CuSn10 contents(90 wt%, 80 wt%, 70 wt%, and 60 wt%). The hot isostatic pressing process was performed under three different pressures and temperatures. The produced MMCs were characterized using density tests, Brinell hardness tests, and compression tests. In addition, the consolidation mechanism was investigated by X-ray diffraction(XRD) analysis and scanning electron microscopy. The test results were compared with those for bulk CuSn10 and bulk GGG40. Mechanical tests results revealed that the metallic chips can be recycled by using hot pressing and that the mechanical properties of the produced MMCs were similar to those of bulk CuSn10. XRD and microscopy studies showed that no intermetallic compounds formed between the metallic chips. The results showed that the CuSn10 and GGG40 chips were consolidated by mechanical interlocking.

Microstructural evolution during reheating of A356 machining chips at semisolid state

The microstructural evolution of A356 machining chips in the semisolid state was studied at different temperatures and holding times. The results showed that the elongated α-Al grains first recrystallized in the semisolid state and then became globular with a high shape factor(SF). Both the temperature and the holding time clearly affected the grain size and SF. When the heating temperature or holding time was increased, the grain size and SF gradually increased and finally became stable. Moreover, the Vickers hardness of primary α-Al grains gradually decreased with increasing heating temperature. The optimal slurry for semisolid processing, with a good combination of grain size and SF, was obtained when the chips were held at 600℃ for 15 min. The semisolid slurry of A356 chips exhibited a lower coarsening rate of α-Al grains than those produced by most of the conventional semisolid processes. The coarsening coefficient was determined to be 436 μm^3·s^(-1) on the basis of the linear Lifshitz–Slyozov–Wagner(LSW) relationship.

Individualized Pixel Synthesis and Characterization of Combinatorial Materials Chips

Conventionally, an experimentally determined phase diagram requires studies of phase formation at a range of temperatures for each composition, which takes years of effort from multiple research groups. Combinatorial materials chip technology, featuring high-throughput synthesis and characterization, is able to determine the phase diagram of an entire composition spread of a binary or ternary system at a single temperature on one materials library, which, though significantly increasing efficiency, still requires many libraries processed at a series of temperatures in order to complete a phase diagram. In this paper, we propose a "one-chip method" to construct a complete phase diagram by individually synthesizing each pixel step by step with a progressive pulse of energy to heat at different temperatures while monitoring the phase evolution on the pixel in situ in real time. Repeating this process pixel by pixel throughout the whole chip allows the entire binary or ternary phase diagram to be mapped on one chip in a single experiment. The feasibility of this methodology is demonstrated in a study of a Ge-Sb-Te ternary alloy system, on which the amorphouscrystalline phase boundary is determined.

Hazardous effects of fried potato chips on the development of retina in albino rats

Objective:To evaluate the hazardous effects of fried potato chips upon the retina of two developmental stages of the albino rats aged 7 and 14 days from parturition.Methods:Pregnant rats were arranged into two groups:control pregnant rats and consequently their delivered newborns until reaching 7 and 14 days old from parturition and fried potato chips group in which pregnant rats at the 6th day of gestation maintained on diet formed of fried potato chips supplied from the market mixed with standard diet at a concentration of 50%per each till 7 and 14 postpartum.Three fold integrated approaches were adopted,namely,histological,ultrastructural and proteomic analysis.Results:Histological examination of the retina of the experimental offsprings revealed many histopathological changes,including massive degeneration,vacuolization and cell loss in the ganglion cell layer,as well as general reduction in retinal size.At the ultrastructural level,the retina of experimental offsprings exhibited number of deformities,including ill differentiated and degenerated nuclear layer,malformed and vacuolated pigment epithelium with vesiculated and fragmented rough endoplasmic reticulum,degenerated outer segment of photoreceptors,as well as swollen choriocapillaris and loss of neuronal cells.Proteomic analysis of retina of the two experimental developmental stages showed variations in the expressed proteins as a result of intoxication which illustrated the adverse toxic effects of fried potato chips upon the retina.Conclusions:It can be concluded that the effect of fried potato chips on the development of retina in rats may be due to the presence of acrylamide or its metabolite.