Using 3-D elastic-plastic FEM, the cold strip rolling process in a 4-high mill was simulated. The elastic deformation of rolls, the plastic deformation of the strip, and the pressure between the work roll and the back...Using 3-D elastic-plastic FEM, the cold strip rolling process in a 4-high mill was simulated. The elastic deformation of rolls, the plastic deformation of the strip, and the pressure between the work roll and the backup roll were taken into account. The distribution of rolling pressure along the strip width was obtained. Based on the simulation results, the peak value of rolling pressure and the location of the peak were analyzed under different rolling conditions. The effects of the roll bending force and the strip width on the distribution of rolling pressure along the width direction were determined.展开更多
Microwave heating,which is used for pre-treatment of concrete before it is comminuted,stands as a strong candidate for selective liberation of multiphase materials like concrete.This paper is concerned with the select...Microwave heating,which is used for pre-treatment of concrete before it is comminuted,stands as a strong candidate for selective liberation of multiphase materials like concrete.This paper is concerned with the selective liberation of concrete's raw constituents(particularly aggregate)for recycling by considering the water content of concrete as a parameter of microwave heating for the first time.The deterioration law of the concrete's performance was characterized by the variation in the splitting tensile strength and relative dynamic modulus after heating by microwave at different water contents.Besides,tests were conducted to evaluate the performance of the interface transition zone(ITZ)between aggregate and mortar as well as to investigate the reasons for the stripping behavior of aggregate-mortar,which included the interface tensile strength test,temperature measurement,and porosity test.The deterioration law of splitting tensile strength and relative dynamic modulus revealed that the performance of concrete was subject to different degrees of damage depending on the water content.Furthermore,experimental results showed that interface bonding strength between aggregate and mortar was dramatically impaired,and a large temperature difference was generated between the aggregate and mortar during microwave heating.Meanwhile,the permeable pores increased considerably even when the specimens were dried.In the presence of water,the intactness of ITZ between aggregate and mortar was destroyed by microwave heating,and its performance was significantly lowered,which led to the occurrence of stripping behavior between aggregate and mortar.This was reaffirmed by the microstructure presented by scanning electron microscopy.Thus,the newly developed microwave pretreatment improved by providing appropriate water contents for concrete corresponding to different strength grades is a promising method for recycling aggregate from waste concrete.展开更多
A mathematic model of rolling pressure during a novel semisolid shearing-rolling process was established. The rolling pressure in this process is higher than that in the conventional rolling. The increment of rolling ...A mathematic model of rolling pressure during a novel semisolid shearing-rolling process was established. The rolling pressure in this process is higher than that in the conventional rolling. The increment of rolling pressure in the backward slip zone is higher than that in the forward slip zone, and the neutral plane moves toward to the roll gap entrance. The maximum and the average rolling pressures increase with the decrease of strip thickness, and the effects of strip thickness on the rolling pressure is more obvious in the forward slip zone than in the backward slip zone. Meanwhile, the neutral plane moves toward the roll gap exit with the decrease of strip thickness. The maximum and average rolling pressures increase with the decrease of strip width, and the strip width affects the pressure more obviously in the backward slip zone than in the forward slip zone. At the same time, the neutral plane moves toward the roll gap entrance with the decrease of strip width. The maximum and average rolling pressures increase with increasing roll radius, and the neutral plane moves toward the roll gap exit.展开更多
基金Item Sponsored by Hi-Tech Research and Development Program of China (2003AA33G010) National Basic Research Program of China (G2000067208-4)
文摘Using 3-D elastic-plastic FEM, the cold strip rolling process in a 4-high mill was simulated. The elastic deformation of rolls, the plastic deformation of the strip, and the pressure between the work roll and the backup roll were taken into account. The distribution of rolling pressure along the strip width was obtained. Based on the simulation results, the peak value of rolling pressure and the location of the peak were analyzed under different rolling conditions. The effects of the roll bending force and the strip width on the distribution of rolling pressure along the width direction were determined.
基金the financial support from the open project funds for National Major Science and Technology Infrastructure of Materials Service Safety Assessment Facilities,China(MSAF-2020-106)the National Natural Science Foundation of China(No.51808051)。
文摘Microwave heating,which is used for pre-treatment of concrete before it is comminuted,stands as a strong candidate for selective liberation of multiphase materials like concrete.This paper is concerned with the selective liberation of concrete's raw constituents(particularly aggregate)for recycling by considering the water content of concrete as a parameter of microwave heating for the first time.The deterioration law of the concrete's performance was characterized by the variation in the splitting tensile strength and relative dynamic modulus after heating by microwave at different water contents.Besides,tests were conducted to evaluate the performance of the interface transition zone(ITZ)between aggregate and mortar as well as to investigate the reasons for the stripping behavior of aggregate-mortar,which included the interface tensile strength test,temperature measurement,and porosity test.The deterioration law of splitting tensile strength and relative dynamic modulus revealed that the performance of concrete was subject to different degrees of damage depending on the water content.Furthermore,experimental results showed that interface bonding strength between aggregate and mortar was dramatically impaired,and a large temperature difference was generated between the aggregate and mortar during microwave heating.Meanwhile,the permeable pores increased considerably even when the specimens were dried.In the presence of water,the intactness of ITZ between aggregate and mortar was destroyed by microwave heating,and its performance was significantly lowered,which led to the occurrence of stripping behavior between aggregate and mortar.This was reaffirmed by the microstructure presented by scanning electron microscopy.Thus,the newly developed microwave pretreatment improved by providing appropriate water contents for concrete corresponding to different strength grades is a promising method for recycling aggregate from waste concrete.
基金supported by the National Science Foundation for Outstanding Young Scholars of China (No.51222405)the National Natural Science Foundation of China (No.51034002)+1 种基金the Fok Ying-Tong Education Foundation (No.132002)the Major State Basic Research and Development Program of China (No.2011CB610405)
文摘A mathematic model of rolling pressure during a novel semisolid shearing-rolling process was established. The rolling pressure in this process is higher than that in the conventional rolling. The increment of rolling pressure in the backward slip zone is higher than that in the forward slip zone, and the neutral plane moves toward to the roll gap entrance. The maximum and the average rolling pressures increase with the decrease of strip thickness, and the effects of strip thickness on the rolling pressure is more obvious in the forward slip zone than in the backward slip zone. Meanwhile, the neutral plane moves toward the roll gap exit with the decrease of strip thickness. The maximum and average rolling pressures increase with the decrease of strip width, and the strip width affects the pressure more obviously in the backward slip zone than in the forward slip zone. At the same time, the neutral plane moves toward the roll gap entrance with the decrease of strip width. The maximum and average rolling pressures increase with increasing roll radius, and the neutral plane moves toward the roll gap exit.
