We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estima...We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estimate the device temperature, which is linearly with electrical input power. The simulation results show that there is almost no temperature gradient within the OLED device working under steady state conditions. Furthermore, thermal analysis simulation results show that the surface properties （convective heat transfer coetficient and surface emissivity） of the substrate or cathode can significantly affect the temperature distribution of the OLED.展开更多
According to inverse heat transfer theory, the evolutions of synthetic surface heat transfer coefficient（SSHTC） of the quenching surface of 7B50 alloy during water-spray quenching were simulated by the Pro CAST soft...According to inverse heat transfer theory, the evolutions of synthetic surface heat transfer coefficient（SSHTC） of the quenching surface of 7B50 alloy during water-spray quenching were simulated by the Pro CAST software based on accurate cooling curves measured by the modified Jominy specimen and temperature-dependent thermo-physical properties of 7 B50 alloy calculated using the JMat Pro software. Results show that the average cooling rate at 6 mm from the quenching surface and 420-230 ℃（quench sensitive temperature range） is 45.78℃/s. The peak-value of the SSHTC is 69 kW/（m^2·K） obtained at spray quenching for 0.4 s and the corresponding temperature of the quenching surface is 160 ℃. In the initial stage of spray quenching, the phenomenon called ＂temperature plateau＂ appears on the cooling curve of the quenching surface. The temperature range of this plateau is 160-170℃ with the duration about 3 s. During the temperature plateau, heat transfer mechanism of the quenching surface transforms from nucleate boiling regime to single-phase convective regime.展开更多
The uniformity principle of temperature difference field is very useful in heat exchanger analyses and optimizations.In this paper, we analyze some other heat transfer optimization problems in the thermal management s...The uniformity principle of temperature difference field is very useful in heat exchanger analyses and optimizations.In this paper, we analyze some other heat transfer optimization problems in the thermal management system of spacecrafts,including the cooling of thermal components, the one-stream series-wound heat exchanger network, the volume-to-point heat conduction problem, and the radiative heat transfer optimization problem, and have found that the uniformity principle of temperature difference field also holds. When the design objectives under the given constraints are achieved, the distributions of the temperature difference fields are uniform. The principle reflects the characteristic of the distribution of potential in the heat transfer optimization problems. It is also shown that the principle is consistent with the entransy theory. Therefore, although the principle is intuitive and phenomenological, the entransy theory can be the physical basis of the principle.展开更多
In current research about nanofluid convection heat transfer, random motion of nanoparticles in the liquid distribution problem mostly was not considered. In order to study on the distribution of nanoparticles in liqu...In current research about nanofluid convection heat transfer, random motion of nanoparticles in the liquid distribution problem mostly was not considered. In order to study on the distribution of nanoparticles in liquid, nanofluid transport model in pipe is established by using the continuity equation, momentum equation and Fokker-Planck equation. The velocity distribution and the nanoparticles distribution in liquid are obtained by numerical calculation, and the effect of particle size and particle volume fraction on convection heat transfer coefficient of nanofluids is analyzed. The result shows that in high volume fraction （ 0 _-- 0.8% ）, the velocity distribution of nanofluids characterizes as a ＂cork-shaped＂ structure, which is significantly different from viscous fluid with a parabolic distribution. The convection heat transfer coefficient increases while the particle size of nanoparticle in nanofluids decreases. And the convection heat transfer coefficient of nanofluids is in good agreement with the experimental result both in low （0 ~〈 0.1% ） and high （ q = 0.6% ） volume fractions. In presented model, Brown motion, the effect of interactions between nanoparticles and fluid coupling, is also considered, but any phenomenological parameter is not introduced. Nanoparticles in liquid transport distribution can be quantitatively calculated by this model.展开更多
The flat-plate solar collector is an important component in solar-thermal systems,and its heat transfer optimization is of great significance in terms of the efficiency of energy utilization.However,most existing flat...The flat-plate solar collector is an important component in solar-thermal systems,and its heat transfer optimization is of great significance in terms of the efficiency of energy utilization.However,most existing flat-plate collectors adopt metallic absorber plates with uniform thickness,which often works against energy conservation.In this paper,to achieve the optimal heat transfer performance,we optimized the thickness distribution of the absorber with the constraint of fixed total material volume employing entransy theory.We first established the correspondence between the collector efficiency and the loss of entransy,and then proposed the constrained extreme-value problem and deduced the optimization criterion,namely a uniform temperature gradient,employing a variational method.Finally,on the basis of the optimization criterion,we carried out numerical simulations,with the results showing remarkable optimization effects.When irradiation,the ambient temperature and the wind speed are 800 W/m2,300 K and 3 m/s,respectively,the collector efficiency is enhanced by 8.8% through optimization,which is equivalent to a copper saving of 30%.We also applied the thickness distribution optimized for wind speed of 3 m/s in heat transfer analysis with different wind speed conditions,and the collector efficiency was remarkably better than that for an absorber with uniform thickness.展开更多
Based on thermoacoustic theory, a coupled thermal-mechanical model for graphene films is established, and the analytical solutions for thermal-acoustic radiation from a graphene thin film are obtained. The sound press...Based on thermoacoustic theory, a coupled thermal-mechanical model for graphene films is established, and the analytical solutions for thermal-acoustic radiation from a graphene thin film are obtained. The sound pressure of the graphene film generator on different substrates is measured, and the measurement data is compared with the theoretical results. The frequency response from the experimental results is consistent with the theoretical ones, while the measured values are slightly lower than the theoretical ones. Therefore, the accuracy of the proposed theoretical model is verified. It is shown that thermal-acoustic radiation from a graphene thin film reveals a wide frequency response. The sound pressure level increases with the frequency in the low frequency range, while the sound pressure varies smoothly with frequency in the high frequency range. Thus it can be used as excellent thermal generator. When the thermal effusivity of the substrate is smaller, then the sound pressure of grapheme films will be higher. Furthermore, the sound pressure decreases with the increase of heat capacity per unit area of grapheme films. Results will contribute to the mechanism of graphene films generator and its applications in the design of loudspeaker and other related areas.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 11304247the Shaanxi Provincial Research Plan for Young Scientific and Technological New Stars(No 2015KJXX-40)the Youth Foundation of Xi’an University of Post&Telecommunication under Grant Nos 1011215 and 1010473
文摘We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estimate the device temperature, which is linearly with electrical input power. The simulation results show that there is almost no temperature gradient within the OLED device working under steady state conditions. Furthermore, thermal analysis simulation results show that the surface properties （convective heat transfer coetficient and surface emissivity） of the substrate or cathode can significantly affect the temperature distribution of the OLED.
基金Project(2016YFB0300801)supported by the National Key Research and Development Program of ChinaProject(51371045)supported by the National Natural Science Foundation of China
文摘According to inverse heat transfer theory, the evolutions of synthetic surface heat transfer coefficient（SSHTC） of the quenching surface of 7B50 alloy during water-spray quenching were simulated by the Pro CAST software based on accurate cooling curves measured by the modified Jominy specimen and temperature-dependent thermo-physical properties of 7 B50 alloy calculated using the JMat Pro software. Results show that the average cooling rate at 6 mm from the quenching surface and 420-230 ℃（quench sensitive temperature range） is 45.78℃/s. The peak-value of the SSHTC is 69 kW/（m^2·K） obtained at spray quenching for 0.4 s and the corresponding temperature of the quenching surface is 160 ℃. In the initial stage of spray quenching, the phenomenon called ＂temperature plateau＂ appears on the cooling curve of the quenching surface. The temperature range of this plateau is 160-170℃ with the duration about 3 s. During the temperature plateau, heat transfer mechanism of the quenching surface transforms from nucleate boiling regime to single-phase convective regime.
基金Project supported by the Science Fund for Creative Research Groups of National Natural Science Foundation of China(Grant No.51621062)
文摘The uniformity principle of temperature difference field is very useful in heat exchanger analyses and optimizations.In this paper, we analyze some other heat transfer optimization problems in the thermal management system of spacecrafts,including the cooling of thermal components, the one-stream series-wound heat exchanger network, the volume-to-point heat conduction problem, and the radiative heat transfer optimization problem, and have found that the uniformity principle of temperature difference field also holds. When the design objectives under the given constraints are achieved, the distributions of the temperature difference fields are uniform. The principle reflects the characteristic of the distribution of potential in the heat transfer optimization problems. It is also shown that the principle is consistent with the entransy theory. Therefore, although the principle is intuitive and phenomenological, the entransy theory can be the physical basis of the principle.
基金supported by National Natural Science Foundation of China(Grant No.51375090)
文摘In current research about nanofluid convection heat transfer, random motion of nanoparticles in the liquid distribution problem mostly was not considered. In order to study on the distribution of nanoparticles in liquid, nanofluid transport model in pipe is established by using the continuity equation, momentum equation and Fokker-Planck equation. The velocity distribution and the nanoparticles distribution in liquid are obtained by numerical calculation, and the effect of particle size and particle volume fraction on convection heat transfer coefficient of nanofluids is analyzed. The result shows that in high volume fraction （ 0 _-- 0.8% ）, the velocity distribution of nanofluids characterizes as a ＂cork-shaped＂ structure, which is significantly different from viscous fluid with a parabolic distribution. The convection heat transfer coefficient increases while the particle size of nanoparticle in nanofluids decreases. And the convection heat transfer coefficient of nanofluids is in good agreement with the experimental result both in low （0 ~〈 0.1% ） and high （ q = 0.6% ） volume fractions. In presented model, Brown motion, the effect of interactions between nanoparticles and fluid coupling, is also considered, but any phenomenological parameter is not introduced. Nanoparticles in liquid transport distribution can be quantitatively calculated by this model.
基金supported by the National Natural Science Foundation of China (51006060)
文摘The flat-plate solar collector is an important component in solar-thermal systems,and its heat transfer optimization is of great significance in terms of the efficiency of energy utilization.However,most existing flat-plate collectors adopt metallic absorber plates with uniform thickness,which often works against energy conservation.In this paper,to achieve the optimal heat transfer performance,we optimized the thickness distribution of the absorber with the constraint of fixed total material volume employing entransy theory.We first established the correspondence between the collector efficiency and the loss of entransy,and then proposed the constrained extreme-value problem and deduced the optimization criterion,namely a uniform temperature gradient,employing a variational method.Finally,on the basis of the optimization criterion,we carried out numerical simulations,with the results showing remarkable optimization effects.When irradiation,the ambient temperature and the wind speed are 800 W/m2,300 K and 3 m/s,respectively,the collector efficiency is enhanced by 8.8% through optimization,which is equivalent to a copper saving of 30%.We also applied the thickness distribution optimized for wind speed of 3 m/s in heat transfer analysis with different wind speed conditions,and the collector efficiency was remarkably better than that for an absorber with uniform thickness.
基金supported by the National Natural Science Foundation of China(51375321)Soochow University "Soochow Scholars" program(R513300116)
文摘Based on thermoacoustic theory, a coupled thermal-mechanical model for graphene films is established, and the analytical solutions for thermal-acoustic radiation from a graphene thin film are obtained. The sound pressure of the graphene film generator on different substrates is measured, and the measurement data is compared with the theoretical results. The frequency response from the experimental results is consistent with the theoretical ones, while the measured values are slightly lower than the theoretical ones. Therefore, the accuracy of the proposed theoretical model is verified. It is shown that thermal-acoustic radiation from a graphene thin film reveals a wide frequency response. The sound pressure level increases with the frequency in the low frequency range, while the sound pressure varies smoothly with frequency in the high frequency range. Thus it can be used as excellent thermal generator. When the thermal effusivity of the substrate is smaller, then the sound pressure of grapheme films will be higher. Furthermore, the sound pressure decreases with the increase of heat capacity per unit area of grapheme films. Results will contribute to the mechanism of graphene films generator and its applications in the design of loudspeaker and other related areas.
