A Miniaturized Broadband Wilkinson Power Divider Using Micro-Strip Branch Lines

A miniaturized broadband Wilkinson power divider is proposed. Micro-strip branch lines are introduced to replace multiple resistors used in multi-stage Wilkinson power dividers to increase the bandwidth of single-stage Wilkinson power dividers. To demonstrate its performance, an improved single-stage Wilkinson power divider with four micro-strip branch lines was designed. Simulated results show that the insert loss is better than 3.2 dB, the input return loss, output return loss, and isolation are better than 15 dB respectively, across a 76% bandwidth from 18 to 40 GHz. .

A Compact UHF Antenna Based on Hilbert Fractal Elements and a Serpentine Arrangement for Detecting Partial Discharg

Efforts to protect electric power systems from faults have commonly relied on the use of ultra-high frequency(UHF)antennas for detecting partial discharge(PD)as a common precursor to faults.However,the effectiveness of existing UHF antennas suffers from a number of challenges such as limited bandwidth,relatively large physical size,and low detection sensitivity.The present study addresses these issues by proposing a compact microstrip patch antenna with fixed dimensions of 100 mm×100 mm×1.6 mm.The results of computations yield an optimized antenna design consisting of 2nd-order Hilbert fractal units positioned within a four-layer serpentine arrangement with a fractal unit connection distance of 3.0 mm.Specifically,the optimized antenna design achieves a detection bandwidth for which the voltage standing wave ratio is less than 2 that is approximately 97.3%of the UHF frequency range(0.3–3 GHz).Finally,a prototype antenna is fabricated using standard printed circuit board technology,and the results of experiments demonstrate that the proposed antenna is capable of detecting PD signals at a distance of 8 m from the discharge source.

A New Approach Based on Iterative Method for the Characterization of a Micro-Strip Line with Thick Copper Conductor

In this work, we applied two electromagnetic models for the characterization of a planar structure including a flat, thick copper conductor. Indeed the first model is consisted by modeling two metal ribbons without bulkiness, placed one above the other at a distance of h2 equal to the thickness of the thick conductor. This approach has been implemented and tested by the iterative method. The results of simulations have been compared with those calculated by the Ansoft HFSS software, and they are in good concordance, validating the method of analysis used. The second model is based on the calculation of the effective permittivity of the medium containing the thick conductor. This medium consists of a metallic region of complex relative permittivity , the rest of this medium is filled with air er2 = 1. The effective permittivity eeff calculated from these two relative permittivity er2 and . Comparing the simulation results of this new formulation of the iterative method with those calculated by the software Ansoft HFSS shows that they are in good matching which validates the second model.

Optical and electronic performances of CVD diamond film andits applications in radiation detectors

The outstanding properties of CVD diamond film such as electronic, optical, thermal and mechanical and the high radiation hardness have made it an ideal candidate material for radiation detectors in severe environments. Fabrication of ＇detector grade＇ CVD diamond films and development of CVD diamond detectors have been leading edge subjects. Micro-strip gas chamber （MSGC） fabricated on CVD diamond substrate would overcome the charge-up effect and the substrate instability, which has been a hotspot in the research of gas detectors.

Submillimeter wave communication versus millimeter wave communication

This paper studies the performance of a submillimeter wave antenna operating between frequencies 0.1 THz and 10 THz with a 4-cyano-4-pentylbiphenyl[5CB]substrate.Since the size and shape of the antenna impact its gain/directivity,resonant frequency,bandwidth,and efficiency,the two antenna types considered in this paper are:(a)Rectangular Patch Antenna(RPA),and(b)Cylindrical Dielectric Resonator Antenna(CDRA).Here a submillimeter wave antenna is compared with a millimeter wave(a few GHz to 100 GHz)antenna.These popular mmwave antennas are chosen for the submillimeter wave antenna in order to understand changes in their performance as the result of changes in their geometrical shape.FEldberechnung bei Korpern mit beliebiger Oberflache(FEKO)software is used for the design and calculation of the Three-Dimensional(3D)ElectroMagnetic(EM)patterns.This paper also concentrates on the design and analysis of a massive submillimeter wave Multiple-Input Multiple-Output(MIMO)(8 by 8)RPA and CDRA.

DAMPE silicon tracker on-board data compression algorithm

The Dark Matter Particle Explorer（DAMPE） is an upcoming scientific satellite mission for high energy gamma-ray, electron and cosmic ray detection. The silicon tracker（STK） is a subdetector of the DAMPE payload.It has excellent position resolution（readout pitch of 242 μm）, and measures the incident direction of particles as well as charge. The STK consists of 12 layers of Silicon Micro-strip Detector（SMD）, equivalent to a total silicon area of6.5 m2. The total number of readout channels of the STK is 73728, which leads to a huge amount of raw data to be processed. In this paper, we focus on the on-board data compression algorithm and procedure in the STK, and show the results of initial verification by cosmic-ray measurements.