Target acquisition performance in the presence of JPEG image compression

This paper presents an investigation on the effect of JPEG compression on the similarity between the target image and the background,where the similarity is further used to determine the degree of clutter in the image.Four new clutter metrics based on image quality assessment are introduced,among which the Haar wavelet-based perceptual similarity index,known as HaarPSI,provides the best target acquisition prediction results.It is shown that the similarity between the target and the background at the boundary between visually lossless and visually lossy compression does not change significantly compared to the case when an uncompressed image is used.In future work,through subjective tests,it is necessary to check whether this presence of compression at the threshold of just noticeable differences will affect the human target acquisition performance.Similarity values are compared with the results of subjective tests of the well-known target Search_2 database,where the degree of agreement between objective and subjective scores,measured through linear correlation,reached a value of 90%.

Fabric Wetting and Wicking Measurement Based on Dynamic Image Acquisition and Processing

After a brief review of existing methods for fabric wetting and wicking measurement,a new numerical approach based on dynamic image acquisition and analysis was proposed to study the liquid wetting and wicking properties of woven fabrics.A measuring system was first developed to record on-site the images of liquid ascending in fabrics for a certain period of time.The hardware and software platforms and the experimental methods were described,and the image processing and analysis as well as other related algorithms were discussed in detail.The liquid front curves and rising rates in wetting and wicking were eventually obtained towards different fabrics.From liquid wicking curves,relationship between liquid ascending height and liquid ascending time agrees well with the Washburn theory.The data comparison between the numerical measurement and the traditional test proves the reliability of the numerical results.

A New Electronic Instrumentation Approach for the Acquisition of Microscopic Blood Smear Images for the Automatic Diagnosis of Anemia

Anemia is a blood abnormality that affects the quantity and quality of red blood cells in the human body. This sometimes banal sign spares no continent and no social stratum. This anomaly is generally appreciated through biological analyzes of patients’ blood. These analyzes, which boil down to the knowledge of hemato-metric constants, cannot by themselves allow the characterization of certain forms of anemia in the sense that most anemia are related to the morphology and color of red blood cells. Our work in this paper is to perform blood smears on patients and perform a morphological and colorimetric analysis of red blood cells on these smears. This approach allowed us to highlight on each erythrocyte morphological and colorimetric descriptors to accurately identify the types of anemia by image processing methods. This identification is performed in an automated environment to allow pathologists to respond quickly to anemia-related emergencies and also improve the treatment to be conducted. This automation required the implementation of a new approach to electronic instrumentation and the acquisition of microscopic blood smear images for the automatic and rapid diagnosis of anemia.

Image Acquisition Method Based on TMS320DM642

In order to achieve high-speed, real-time and accurate, an image acquisition method based on digital signal processor (DSP) TMS320DM642 is proposed for the paper currency image acquisition [1]. System will be high speed digital signal processing (DSP) technology and complex programmable logic device (CPLD) and CIS acquisition module combination, the structure of acquisition system is given and the time series analysis, during the process of collecting this kind of design has the advantages of simple implementation, high recognition rate [2].

Pilling Image Acquisition method for Complicated Texture Fabric

In order to solve the problem of complicated fabric texture interference on the pilling segmentation during the objective evaluation of fabric pilling, a new method of pilling image acquisition was proposed. Firstly, multi-direction lights were projected on the pilled fabric surface and its pilling images were captured, which mixed with invariant fabric background texture and pilling profile information modulated by the variant light projections. The captured fabric pilling images were analyzed by independent component analysis method. Using the spectrum feature analysis method, the independent components belonging to the complicated fabric background texture were separated and the pilling images are reconstructed with the left components. The experimental results showed that this method can effectively separate the pilling image from complicated fabric texture, which provides one possibility for colored fabric pilling objective evaluation.

Design and Implementation of Image Acquisition System Based on STM32

In order to solve the difficulty of reading inconvenience in the measurement process of digital track gauge, a kind of image data acquisition system with low cost and stable performance is designed. The system uses the Cortex-M4 as the core of the STM32F407ZGT6 as the control core, the use of OV2640 as an image sensor to collect images, and the collection of image files stored in the SD card for subsequent image processing to achieve the goal of rail adjustment to lay the foundation. The experimental results show that the image acquisition is stable and refiable and the collected images are clear and meet the design requirements.

Controlled illumination and seismic acquisition geometry for target-oriented imaging

The conventional method of seismic data acquisition geometry design is based on the assumption of horizontal subsurface reflectors, which often is not suitable for complex structure. We start from a controlled illumination analysis and put forward a method of seismic survey geometry design for target-oriented imaging. The method needs a velocity model obtained by a preliminary seismic interpretation. The one-way Fourier finite-difference wave propagator is used to extrapolate plane wave sources on the target layer to the surface. By analyzing the wave energy distribution at the surface extrapolated from the target layer, the shot or receiver locations needed for target layer imaging can be determined. Numerical tests using the SEG-EAGE salt model suggest that this method is useful for confirming the special seismic acquisition geometry layout for target-oriented imaging.

High Speed Image Acquisition ＆ Neutral Particle Count Systems and the RTX Research

In HL-2A tokamak experiment, high speed image acquisitoin system grabs images and shows them in real-time. It provides serial images of discharge to help scientists a lot to analyse the experiment. Neutral particle count system counts the number of neutral particles radiated from fusion plasmas. It provides the data to calculate the ion energy.

Wide/narrow azimuth acquisition footprints and their effects on seismic imaging

Acquisition footprint is a new concept to describe the seismic noise in three-dimensional seismic exploration and it is closely related to geometry and observation shuttering. At present, the study on acquisition footprints has become a hot spot. In partnership with the Dagang Oilfield, we used the channel sand body seismic physical model to study the characteristics of wide/narrow azimuth acquisition footprints and analyzed and compared the two types of footprints and their effects on target imaging. In addition, the footprints caused by data processing of the normal moveout offset （NMO） stretching aberration were discussed. These footprints are located only in the shallow or middle layer in the time slice, and possibly affect the imaging of shallow target layers, and have no influence on deep target imaging. Seismic physical modeling has its advantages in the study of acquisition footprints.

Images of triple gas electron multiplier with pixel-pads

Testing of a triple gas electron multiplier （GEM） with pixel-pads is described. Images by scanning and suspending radioactive sources were obtained by using 96 channels digital data acquisition （DAQ） system which was composed of 96 8×8 mm2 pads and associated electronics channels.

Principle and realization method of tunnel deformation detection based on image recognition and data transmission technology

To detect the deformation of the tunnel structure based on image sensor networks is the advanced study and application of spatial sensor technology. For the vertical settlement of metro tunnel caused by internal and external stress after its long period operation, the overall scheme and measuring principle of tunnel deformation detection system is in- troduced. The image data acquisition and processing of detection target are achieved by the cooperative work of image sensor, ARM embedded system. RS485 communication achieves the data transmission between ARM memory and host computer. The database system in station platform analyses the detection data and obtains the deformation state of tunnel inner wall, which makes it possible to early-warn the tunnel deformation and take preventive measures in time.

Application of 3D Acquisition Design Technology in HCX Gas Storage Project*

In view of the shallow buried depth of the target layer and it is difficult to obtain high-quality seismic data of HCX gas storage project, based on the acquisition parameters of the adjacent area, the 3D acquisition technical scheme is designed for focusing on the imaging of the top of HCX high-steep anticline. By optimizing the acquisition parameters and the excitation and receiving conditions, the acquisition of high-resolution and high signal-to-noise ratio seismic data is guaranteed to meet the demand of fracture prediction and reservoir prediction.

In situ nanobubble sizing by visualization particle tracking and image-based dynamic light scattering

A novel method combining visualization particle tracking with image-based dynamic light scattering was developed to achieve the in situ and real-time size measurement of nanobubbles(NBs).First,the in situ size distribution of NBs was visualized by dark-field microscopy.Then,real-time size during the preparation was measured using image-based dynamic light scattering,and the longitudinal size distribution of NBs in the sample cell was obtained in a steady state.Results show that this strategy can provide a detailed and accurate size of bubbles in the whole sample compared with the commercial ZetaSizer Nano equipment.Therefore,the developed method is a real-time and simple technology with excellent accuracy,providing new insights into the accurate measurement of the size distribution of NBs or nanoparticles in solution.

Digitization and DICOM Standardization of X-ray Image Signal

Picture archiving and communication system (PACS) has played an important role in hospital and developed rapidly in recent years. It is an important part of PACS architecture that X-ray video output connects with PACS. In this paper, a method to digitize the video signals of X-ray facility is introduced. By means of the video capture card, we can acquire digital medical images from X-ray facility. The American College of Radiology (ACR) and the National Electrical Manufacturers Association (NEMA) developed a standard for Digital Imaging and Communications in Medicine (DICOM), this DICOM standard introduces a rule of medical image conversion from conventional format to DICOM one. According to abovementioned standard, X-ray video signals can be connected to PACS easily. This project has been applied in some hospitals successfully and there is satisfied result. Key words image acquisition - image compression - format conversion - DICOM - PACS CLC number TP 391 Foundation item: Supported by the Enterprise Innovation Foundation of Wuhan (WS(2001)14)Biography: ZHOU Li (1977-), male, Master, research direction: microelectronics and solid electronics.

The Development and Application of Color Doppler Ultrasound Image-text Management System

In this paper, the advantages and disadvantages of the existing ultrasonic image management system are analyzed, and also a multi-functional color Doppler ultrasound image-text management system is researched and developed in combination with the experience of color Doppler ultrasound doctors. With this system, the related operations such as color Doppler ultrasound images acquisition, processing, preservation, and medical records are implemented. In the design of the system, a professional acquisition card is used for implementing the acquisition of ordinary video signals. In the meantime, DICOM interface is designed using DICOM3.0 protocol for implementing multi-mode acquisition.

A Semi-Vectorial Morphological Segmentation Multi-Component Images of Coumarins on Thin Layer Combined with Laser for Better Separation

In this work, we propose an approach for the separation of coumarins from thin-layer morphological segmentation based on the acquisition of multicomponent images integrating different types of coumarins. The first step is to make a segmentation by region, by thresholding, by contour, etc. of each component of the digital image. Then, we proceeded to the calculations of parameters of the regions such as the color standard deviation, the color entropy, the average color of the pixels, the eccentricity from an algorithm on the matlab software. The mean color values atR = 91.20 in red, atB = 213.21 in blue showed the presence of samidin in the extract. The color entropy values HG = 5.25 in green and HB = 4.04 in blue also show the presence of visnadine in the leaves of Desmodium adscendens. These values are used to consolidate the database of separation and discrimination of the types of coumarins. The relevance of our coumarin separation or coumarin recognition method has been highlighted compared to other methods, such as the one based on the calculation of frontal ratios which cannot discriminate between two coumarins having the same frontal ratio. The robustness of our method is proven with respect to the separation and identification of some coumarins, in particular samidin and anglicine.

IMAGE仪器2LHR采集单元PA板的维修

本文针对2LHR型采集单元PA板维修难度大的情况,对PA板的电路结构和使用器件进行了分析,找出了PA板单道指标超限的故障原因,并对CMOS器件进行分析,根据其特性,提出维修过程中应注意的事项,以确保维修质量和效率。

3D smart mA调控技术对不同BMI患者图像采集时间质量及辐射剂量的影响

目的:分析3D智能管电流(3D smart mA)调控技术对不同体质量指数(BMI)患者图像采集时间、质量及辐射剂量的影响。方法:择取的180例行胸部CT扫描患者选自西安交通大学第一附属医院2021年6月至2022年12月期间所收治,按照BMI将患者分为三组,A组(18.5 kg/m^(2)≤BMI≤23.9kg/m^(2),n=75)、B组(23.9kg/m^(2)0.05);两位医师对肺部不同层面图像质量(IQS)评分进行评价,Kappa一致性非常好(Kappa值=0.768、0.812、0.861);三组肺部不同层面IQS评分对比,差异无统计学意义(P>0.05);三组肺部不同层面CT对比,差异有统计学意义,且随着BMI增加而下降(P<0.05),三组肺部不同层面图像标准差(SD)值对比,差异无统计学意义(P>0.05);三组容积CT剂量指数(CTDIvol)对比,差异无统计学意义(P>0.05);A组DLP、ED均低于B、C组,B组DLP、ED低于C组(P<0.05)。结论:不同BMI患者应用3D smart mA调控技术,在保证图像质量的前提下,可有效降低辐射剂量。