Phase change microcapsules can carry large amounts of heat and be dispersed into other mediums either as a solid composite or as slurry fluids without changes to their appearance or fluidity. These two standout featur...Phase change microcapsules can carry large amounts of heat and be dispersed into other mediums either as a solid composite or as slurry fluids without changes to their appearance or fluidity. These two standout features make phase change microcapsules ideal for use in thermal energy applications to enhance the efficiency of energy utilisation. This review paper includes methods used for the encapsulation of phase change materials, especially the method suitable for large scale productions, the trends of phase change microcapsule development and their use in thermal energy applications in static and dynamic conditions. The effect of phase change microcapsules on convective heat transfer through addition to thermal fluids as slurries is critically reviewed. The review highlighted that so far the phase change microcapsules used mainly have polymeric shells, which has very low thermal conductivities. Their enhancement in convective heat transfer was demonstrated in locations where the phase change material experiences phase change. The phase change results in the slurries having higher apparent local specific heat capacities and thus higher local heat transfer coefficients. Out of the phase change region, no enhancement is observed from the solid microcapsule particles due to the low specific heat capacity and thermal conductivity of the phase change microcapsules compared to that of water, which is normally used as slurry media in the test. To further the research in this area, phase change microcapsules with higher specific heat capacity, higher thermal conductivity and better shape stability need to be applied.展开更多
Microencapsulation phase change material slurry(MEPCMS) becomes a potential working fluid for cooling high energy density miniaturized components,thanks to the latent heat absorption of particles in the heat transfer ...Microencapsulation phase change material slurry(MEPCMS) becomes a potential working fluid for cooling high energy density miniaturized components,thanks to the latent heat absorption of particles in the heat transfer process.In this work,the Discrete Phase Model(DPM) based on the Euler-Lagrangian method is used to numerically investigate the convective heat transfer characteristics of MEPCMS flowing through a rectangular minichannel with constant heat flux.The results show that particles of MEPCMS are mainly subjected to drag force during the flow.Even so,they can migrate from the high-temperature region to the low-temperature region driven by the thermophoretic force,affecting the particle distribution and phase change process.Moreover,the Nux of the MEPCMS fluctuates due to particle phase change with varying specific heat capacities.Specifically,the value increases first,then decreases,and eventually increases again until it approaches the fully developed value of the pure base fluid as the particles gradually melt.Furthermore,the heat transfer performance of the MEPCMS is influenced by the combination of fluid inlet temperature fluid inlet velocity(v),and mass concentration(c_(m)) of MEPCM particles.The result shows that the maximum reduction of the maximum bottom wall temperature difference(ΔT_(w)) is 23.98% at T_(in)=293.15 K,v=0.15 m·s^(-1),c_(m)=10%.展开更多
相变微胶囊(microencapsulated phase change material,MPCM)在建筑节能领域应用广泛,为研究其传热特性,搭建了以水为换热流体(heat transfer fluid,HTF),微胶囊悬浮液为储能介质的潜热储能(latent thermal energy storage,LTES)系统。...相变微胶囊(microencapsulated phase change material,MPCM)在建筑节能领域应用广泛,为研究其传热特性,搭建了以水为换热流体(heat transfer fluid,HTF),微胶囊悬浮液为储能介质的潜热储能(latent thermal energy storage,LTES)系统。在实验过程中,通过改变换热流体的进口初始温度以及搅拌器的搅拌速率,获得了MPCM悬浮液的温度变化规律并计算了MPCM悬浮液的平均充放冷速率。实验结果表明:在充冷过程中,MPCM相变时温度变化速率减缓,相变温度区间较大,而在放冷过程中,MPCM相变时温度保持恒定,相变温度区间较小;未搅拌时,MPCM悬浮液中温度梯度较大,传热能力较差;搅拌时,MPCM悬浮液混合均匀,其温度梯度很小,传热能力较强;增加搅拌器的搅拌速率及水与相变微胶囊悬浮液的温差均可以提高MPCM的充放冷速率。展开更多
文摘Phase change microcapsules can carry large amounts of heat and be dispersed into other mediums either as a solid composite or as slurry fluids without changes to their appearance or fluidity. These two standout features make phase change microcapsules ideal for use in thermal energy applications to enhance the efficiency of energy utilisation. This review paper includes methods used for the encapsulation of phase change materials, especially the method suitable for large scale productions, the trends of phase change microcapsule development and their use in thermal energy applications in static and dynamic conditions. The effect of phase change microcapsules on convective heat transfer through addition to thermal fluids as slurries is critically reviewed. The review highlighted that so far the phase change microcapsules used mainly have polymeric shells, which has very low thermal conductivities. Their enhancement in convective heat transfer was demonstrated in locations where the phase change material experiences phase change. The phase change results in the slurries having higher apparent local specific heat capacities and thus higher local heat transfer coefficients. Out of the phase change region, no enhancement is observed from the solid microcapsule particles due to the low specific heat capacity and thermal conductivity of the phase change microcapsules compared to that of water, which is normally used as slurry media in the test. To further the research in this area, phase change microcapsules with higher specific heat capacity, higher thermal conductivity and better shape stability need to be applied.
基金the financial support of the National Natural Science Foundation of China (No.U20A20299)the Natural Science Foundation of Guangdong Province (No.2019A1515012119)。
文摘Microencapsulation phase change material slurry(MEPCMS) becomes a potential working fluid for cooling high energy density miniaturized components,thanks to the latent heat absorption of particles in the heat transfer process.In this work,the Discrete Phase Model(DPM) based on the Euler-Lagrangian method is used to numerically investigate the convective heat transfer characteristics of MEPCMS flowing through a rectangular minichannel with constant heat flux.The results show that particles of MEPCMS are mainly subjected to drag force during the flow.Even so,they can migrate from the high-temperature region to the low-temperature region driven by the thermophoretic force,affecting the particle distribution and phase change process.Moreover,the Nux of the MEPCMS fluctuates due to particle phase change with varying specific heat capacities.Specifically,the value increases first,then decreases,and eventually increases again until it approaches the fully developed value of the pure base fluid as the particles gradually melt.Furthermore,the heat transfer performance of the MEPCMS is influenced by the combination of fluid inlet temperature fluid inlet velocity(v),and mass concentration(c_(m)) of MEPCM particles.The result shows that the maximum reduction of the maximum bottom wall temperature difference(ΔT_(w)) is 23.98% at T_(in)=293.15 K,v=0.15 m·s^(-1),c_(m)=10%.
文摘相变微胶囊(microencapsulated phase change material,MPCM)在建筑节能领域应用广泛,为研究其传热特性,搭建了以水为换热流体(heat transfer fluid,HTF),微胶囊悬浮液为储能介质的潜热储能(latent thermal energy storage,LTES)系统。在实验过程中,通过改变换热流体的进口初始温度以及搅拌器的搅拌速率,获得了MPCM悬浮液的温度变化规律并计算了MPCM悬浮液的平均充放冷速率。实验结果表明:在充冷过程中,MPCM相变时温度变化速率减缓,相变温度区间较大,而在放冷过程中,MPCM相变时温度保持恒定,相变温度区间较小;未搅拌时,MPCM悬浮液中温度梯度较大,传热能力较差;搅拌时,MPCM悬浮液混合均匀,其温度梯度很小,传热能力较强;增加搅拌器的搅拌速率及水与相变微胶囊悬浮液的温差均可以提高MPCM的充放冷速率。
