Experimental Investigation of a Phase-Change Material’s Stabilizing Role in a Pilot of Smart Salt-Gradient Solar Ponds

Faced with the world’s environmental and energy-related challenges,researchers are turning to innovative,sustainable and intelligent solutions to produce,store,and distribute energy.This work explores the trend of using a smart sensor to monitor the stability and efficiency of a salt-gradient solar pond.Several studies have been conducted to improve the thermal efficiency of salt-gradient solar ponds by introducing other materials.This study investigates the thermal and salinity behaviors of a pilot of smart salt-gradient solar ponds with(SGSP)and without(SGSPP)paraffin wax(PW)as a phase-change material(PCM).Temperature and salinity were measured experimentally using a smart sensor,with the measurements being used to investigate the stabilizing effects of placing the PCM in the solar pond’s lower convective zone.The experimental results show that the pond with the PCM(SGSPP)achieved greater thermal and salinity stability,with there being a lesser temperature and salinity gradient between the different layers when compared to a solar pond without thePCM(SGSP).The use of the PCM,therefore,helped control the maximum and minimum temperature of the pond’s storage zone.The UCZ has been found to operate approximately 4 degrees above the average ambient temperature of the day in the SGSPP and 7 degrees in SGSP.Moreover,an unstable situation is generated after 5 days from starting the operation and at 1.9 m from the bottom,and certain points have the tendency to be neutral from the upper depths in 1,3 m of the bottom.

Universal memory based on phase-change materials:From phase-change random access memory to optoelectronic hybrid storage

The era of information explosion is coming and information need to be continuously stored and randomly accessed over long-term periods,which constitute an insurmountable challenge for existing data centers.At present,computing devices use the von Neumann architecture with separate computing and memory units,which exposes the shortcomings of“memory bottleneck”.Nonvolatile memristor can realize data storage and in-memory computing at the same time and promises to overcome this bottleneck.Phase-change random access memory(PCRAM)is called one of the best solutions for next generation non-volatile memory.Due to its high speed,good data retention,high density,low power consumption,PCRAM has the broad commercial prospects in the in-memory computing application.In this review,the research progress of phase-change materials and device structures for PCRAM,as well as the most critical performances for a universal memory,such as speed,capacity,and power consumption,are reviewed.By comparing the advantages and disadvantages of phase-change optical disk and PCRAM,a new concept of optoelectronic hybrid storage based on phase-change material is proposed.Furthermore,its feasibility to replace existing memory technologies as a universal memory is also discussed as well.

Paraffin/SiC as a Novel Composite Phase-Change Material for a Lithium-Ion Battery Thermal Management System

A lithium-ion battery thermal management system has always been a hot spot in the battery industry. In this study, a novel high-thermal-conductivity composite phase-change material(CPCM) made by paraffin wax and silicon was adopted to facilitate heat transfer. Moreover, high resistance or even insulation of CPCM is capable of preventing short circuits between the cells. The heat transfer mechanism of CPCMs was determined under a scanning electron microscope. A thermogravimetric analyzer was employed to determine the thermal stability. A diff erential scanning calorimeter was used to explore the thermophysical properties of the composite samples. By comparing the results of the experiment, it was reported that under the silicon carbide content of 5%, the parameters were better than others. The phase-change enthalpy of CPCM was 199.4 J/g, the leakage rate of liquid was 4.6%, and the melting point was 53.6℃. To verify the practicality of CPCM, a three-dimensional layered battery pack model was built in the COMSOL Multiphysics software. By simulating the thermal runaway inside the battery packs of various materials, it was reported that the addition of CPCM significantly narrowed the temperature range of the battery pack from 300–370 to 303–304 K. Therefore, CPCM can eff ectively increase the rate of heat transfer to prevent the chain of thermal runaway reactions. It also enables the battery pack to run at a stable temperature.

Design of broadband achromatic metasurface device based on phase-change material Ge_(2)Sb_(2)Te_(5)

Based on the phase-change material Ge_(2)Sb_(2)Te_(5)(GST),achromatic metasurface optical device in the longer-infrared wavelength is designed.With the combination of the linear phase gradient GST nanopillar and the adjustment of the crystalline fraction m value of GST,the polarization insensitive achromic metalenses and beam deflector metasurface within the longer-infrared wavelength 9.5μm to 13μm are realized.The design results show that the achromatic metalenses can be focused on the same focal plane within the working waveband.The simulation calculation results show that the fullwidth at half-maximum(FWHM)of the focusing spot reaches the diffraction limit at each wavelength.In addition,the same method is also used to design a broadband achromatic beam deflector metasurface with the same deflection angle of 19°.The method proposed in this article not only provides new ideas for the design of achromatic metasurfaces,but also provides new possibilities for the integration of optical imaging,optical coding and other related optical systems.

An artificial synapse by superlattice-like phase-change material for low-power brain-inspired computing

Phase-change material(PCM)is generating widespread interest as a new candidate for artificial synapses in bioinspired computer systems.However,the amorphization process of PCM devices tends to be abrupt,unlike continuous synaptic depression.The relatively large power consumption and poor analog behavior of PCM devices greatly limit their applications.Here,we fabricate a GeTe/Sb2Te3 superlattice-like PCM device which allows a progressive RESET process.Our devices feature low-power consumption operation and potential high-density integration,which can effectively simulate biological synaptic characteristics.The programming energy can be further reduced by properly selecting the resistance range and operating method.The fabricated devices are implemented in both artificial neural networks(ANN)and convolutional neural network(CNN)simulations,demonstrating high accuracy in brain-like pattern recognition.

Melting and Solidification Heat Transfer Characteristics of a Phase-Change Material in a Latent Heat Storage Vessel: Effects of a Perforated Partition Plate and Metal Fiber

Today, latent heat storage technology has advanced to allow reuse of waste heat in the middle-temperature range. This paper describes an approach to develop a latent heat storage system using middle-temperature waste heat (~100oC - 200oC) from factories. Direct contact melting and solidification behavior between a heat-transfer fluid (oil) and a latent heat storage material mixture were observed. The mixture consisted of mannitol and erythritol (Cm = 70 mass %, Ce = 30 mass %) as a phase-change material (PCM). The weight of the PCM was 3.0 kg and the flow rate of the oil, foil, was 1.0, 1.5, or 2.0 kg/min. To decrease the solidified height of the PCM mixture during the solidification process, a perforated partition plate was installed in the PCM region in the heat storage vessel. PCM coated oil droplets were broken by the perforated partition plate, preventing the solidified height of the PCM from increasing. The solidification and melting processes were repeated using metal fiber. It was found that installing the metal fiber was more effective than installing the perforated partition plate to prevent the flow out problem of the PCM.

Fabrication and integration of photonic devices for phase-change memory and neuromorphic computing

In the past decade,there has been tremendous progress in integrating chalcogenide phase-change materials(PCMs)on the silicon photonic platform for non-volatile memory to neuromorphic in-memory computing applications.In particular,these non von Neumann computational elements and systems benefit from mass manufacturing of silicon photonic integrated circuits(PICs)on 8-inch wafers using a 130 nm complementary metal-oxide semiconductor line.Chip manufacturing based on deep-ultraviolet lithography and electron-beam lithography enables rapid prototyping of PICs,which can be integrated with high-quality PCMs based on the wafer-scale sputtering technique as a back-end-of-line process.In this article,we present an overview of recent advances in waveguide integrated PCM memory cells,functional devices,and neuromorphic systems,with an emphasis on fabrication and integration processes to attain state-of-the-art device performance.After a short overview of PCM based photonic devices,we discuss the materials properties of the functional layer as well as the progress on the light guiding layer,namely,the silicon and germanium waveguide platforms.Next,we discuss the cleanroom fabrication flow of waveguide devices integrated with thin films and nanowires,silicon waveguides and plasmonic microheaters for the electrothermal switching of PCMs and mixed-mode operation.Finally,the fabrication of photonic and photonic–electronic neuromorphic computing systems is reviewed.These systems consist of arrays of PCM memory elements for associative learning,matrix-vector multiplication,and pattern recognition.With large-scale integration,the neuromorphic photonic computing paradigm holds the promise to outperform digital electronic accelerators by taking the advantages of ultra-high bandwidth,high speed,and energy-efficient operation in running machine learning algorithms.

Effect of Nanomaterials Addition to Phase Change Materials on Heat Transfer in Solar Panels under Iraqi Atmospheric Conditions

It is common knowledge that phase-change materials are used for the purpose of thermal storage because of the characteristics that are exclusive to these materials and not found in others.These characteristics include a large capacity for absorbing heat and a large capacity for releasing heat when the phase changes;however,these materials have a low thermal conductivity.This paper presents the results of an experimental study that investigated the impact that nanoparticles of copper oxide had on reducing the temperature of solar panels.The phase change substance that was used was determined to be beeswax.The impact of adding nanoscale copper oxide at a concentration of 0.05%of the total mass of wax was investigated and compared to a reference solar panel that did not contain any nanoscale additions.The findings demonstrated that the incorporation of nanoscale copper oxide brought about a reduction of three℃ in the plate’s average temperature as well as a one percent improvement in its electrical efficiency.In cases where it seems that the use of nanoparticles might potentially enhance the performance of integrated solar energy systems that contain phase change.

Numerical Investigation on Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in a Rectangular Minichannel

Microencapsulation phase change material slurry(MEPCMS) becomes a potential working fluid for cooling high energy density miniaturized components,thanks to the latent heat absorption of particles in the heat transfer process.In this work,the Discrete Phase Model(DPM) based on the Euler-Lagrangian method is used to numerically investigate the convective heat transfer characteristics of MEPCMS flowing through a rectangular minichannel with constant heat flux.The results show that particles of MEPCMS are mainly subjected to drag force during the flow.Even so,they can migrate from the high-temperature region to the low-temperature region driven by the thermophoretic force,affecting the particle distribution and phase change process.Moreover,the Nux of the MEPCMS fluctuates due to particle phase change with varying specific heat capacities.Specifically,the value increases first,then decreases,and eventually increases again until it approaches the fully developed value of the pure base fluid as the particles gradually melt.Furthermore,the heat transfer performance of the MEPCMS is influenced by the combination of fluid inlet temperature fluid inlet velocity(v),and mass concentration(c_(m)) of MEPCM particles.The result shows that the maximum reduction of the maximum bottom wall temperature difference(ΔT_(w)) is 23.98% at T_(in)=293.15 K,v=0.15 m·s^(-1),c_(m)=10%.

益生菌微胶囊技术的优缺点及在食品中的应用

随着人们对功能食品的需求不断提升,益生菌产品的销售额在世界范围内有了巨大的增长。微胶囊技术可以为益生菌提供物理屏障,有效减少益生菌损伤、提高存活率,使其到达特定位置释放并发挥作用,使其在食品工业中被广泛应用。该文综述了益生菌微胶囊目前的研究进展,对几种常见的益生菌微胶囊技术的优缺点进行比较分析,介绍了益生菌微胶囊技术在功能食品中的应用情况,并基于此对其未来的发展前景进行展望。

Flow frictional characteristics of microencapsulated phase change material suspensions flowing through rectangular minichannels

An experimental investigation was conducted on the laminar flow frictional characteristics of suspensions with microencapsulated phase change material (MEPCM) in water flowing through rectangular copper minichannels. The MEPCM was provided at an average particle size of 4.97 μm, and was mixed with distilled water to form suspen- sions with various mass concentrations ranging from 0 to 20%. The experiment was per- formed to explore the effect of MEPCM mass concentration on friction factor and pressure drop in the minichannels. The Reynolds number ranged from 200 to 2000 to provide laminar and transitional flows. It was found that the experimental data for the suspensions with 0 and 5% concentration agree well with the existing theoretical data for an incom- pressible, fully developed, laminar Newtonian flow. For the suspensions with mass con- centrations higher than 10%, there is an obvious increase in friction factor and pressure drop in comparison with laminar Newtonian flow.

Heat Transfer of Heat Sinking Vest with Phase-change Material

To investigate thermal protection effects of heat sinking vest with phase-change material （PCM）, human thermoregulation model is introduced, and a thermal mathematical model of heat transfer with phase change has been developed with the enthalpy method. The uniform energy equation is constructed for the whole domain, and the equation is implicitly discreted by control volume and finite difference method. Then the enthalpy in each node is solved by using chasing method to calculate the tridiagonal equations, and the inner surface temperature of PCM could be obtained. According to the human thermoregulation model of heat sinking vest, the dynamic temperature distribution and sweat of the body are solved. Calculation results indicate that the change of core temperature matches the experimental result, and the sweat difference is small. This thermal mathematical model of heat transfer with phase change is credible and appropriate. Through comparing the dynamic temperature distribution and sweat of the body wearing heat sinking vest to results of the body not wearing this clothing, it is evident that wearing heat sinking vest can reduce the body heat load significantly.

A one-step method for producing microencapsulated phase change materials

This short communication reports our recent work on the synthesis and characterisation ofmicrocapsules of phase change materials using silica as the shell material through a one-step method. The method uses no surfactants or dispersants for stabilising the capsules. The results show that the one-step method allows the tuning of the size and polydispersity of the capsules, and the use of different core materials. Analyses of the capsules show that they contain about 65% phase change materials. The results also suggest no need for a stabilising agent due to self-stabilisation by the amine groups. Further work is underway to investigate the mechanical and thermal properties of the microcapsules and the scale-up of the method.

Study on the Heat Conduction of Phase-Change Material Microcapsules

The 3ω approach was used to measure the effective thermal conductivity of phase-change material microcapsules (PCMMs) based on urea formaldehyde and sliced paraffin. The effective thermal conductivities of PCMMs with different densities were measured within the phase-change temperature range. The relationships between effective thermal conductivity, density and temperature were analysed. The effective thermal conductivity reached peak values within the phase-change temperature range and the temperature peak value was consistent with the peak value of the phase-change temperature. The effective thermal conductivity increased with increasing density due to the decreased porosity of samples and their increased solid-phase conduction.

Visible-near infrared ultra-broadband polarization-independent metamaterial perfect absorber involving phase-change materials

We numerically demonstrate a novel ultra-broadband polarization-independent metamaterial perfect absorber in the visible and near-infrared region involving the phase-change material Ge_2Sb_2Te_5(GST).The novel perfect absorber scheme consists of an array of high-index strong-absorbance GST square resonators separated from a continuous Au substrate by a low-index lossless dielectric layer(silica)and a high-index GST planar cavity.Three absorption peaks with the maximal absorbance up to 99.94% are achieved,owing to the excitation of plasmon-like dipolar or quadrupole resonances from the high-index GST resonators and cavity resonances generated by the GST planar cavity.The intensities and positions of the absorption peaks show strong dependence on structural parameters.A heat transfer model is used to investigate the temporal variation of temperature within the GST region.The results show that the temperature of amorphous GST can reach up to 433 K of the phase transition temperature from room temperature in just 0.37 ns with a relatively low incident light intensity of 1.11×10~8W∕m^2,due to the enhanced ultra-broadband light absorbance through strong plasmon resonances and cavity resonance in the absorber.The study suggests a feasible means to lower the power requirements for photonic devices based on a thermal phase change via engineering ultra-broadband light absorbers.

Tunable near-infrared plasmonic perfect absorber based on phase-change materials

A tunable plasmonic perfect absorber with a tuning range of 650 nm is realized by introducing a 20 nm thick phase-change material Ge2Sb2Te5 layer into the metal–dielectric–metal configuration.The absorption at the plasmonic resonance is kept above 0.96 across the whole tuning range.In this work we study this extraordinary optical response numerically and reveal the geometric conditions which support this phenomenon.This work shows a promising route to achieve tunable plasmonic devices for multi-band optical modulation,communication,and thermal imaging.

Bioinspired solar anti-icing/de-icing surfaces based on phase-change materials

Solar anti-icing/de-icing is an environmentally friendly way to convert light energy into heat with the purpose of melting/removing ice. However, the inherent intermittency of solar irradiation limits the application of solar-thermal energy-conversion technologies, when continuous de-icing is required. Herein, we investigate a solar phase-change material(SPCM) that consists of expanded graphite(EG)/paraffin/polydimethylsiloxane(PDMS), which can not only perform the solar-thermal conversion but also release/store thermal energy. Under sunlight, the SPCM effectively collects and converts the light energy into thermal energy for later antiicing/de-icing. To prepare for a no-light period, e.g., in the evening, the converted thermal energy can be stored in the SPCM using a phase transition. In this way, the energy can be released when needed to keep the temperature of a surface from freezing. The SPCM surface shows excellent anti-icing/de-icing properties such as a long droplet freeze-delay time(td> 2 h), even at an ultra-low temperature(-40℃), using only the light of one sun. This freeze-delay time is much longer than that for a surface without PCM. The tested SPCM surfaces show a high de-icing rate(2.21 kg m^(-2)h^(-1)) under real-life conditions. In addition, the SPCM shows a high de-icing rate and excellent durability. This study provides a promising route for the utilization of solar energy in anti-icing/de-icing applications.

Microencapsulation of stearic acid with polymethylmethacrylate using iron(Ⅲ) chloride as photo-initiator for thermal energy storage

Aiming to identify the validity of fabricating microencapsulated phase change material(PCM) with polymethylmethacrylate(PMMA) by ultraviolet curing emulsion polymerization method using iron(III) chloride as photoinitiator,SA/PMMA microcapsules were prepared and various techniques were employed to determine the ignition mechanism,structural characteristics and thermal properties of the composite.The results shown that the microcapsules containing SA with maximum percentage of 52.20 wt% formed by radical mechanism and only physical interactions existed in the components both in the prepared process and subsequent use.The phase change temperatures and latent heats of the microencapsulated SA were measured as 55.3 °C and 102.1 J·g^(-1) for melting,and 48.8 °C and 102.8 J·g^(-1) for freezing,respectively.Thermal gravimetric analysis revealed that SA/PMMA has good thermal durability in working temperature range.The results of accelerated thermal cycling test are all shown that the SA/PMMA have excellent thermal reliability and chemical stability although they were subjected 1000 melting/freezing cycles.In summary,the comparable thermal storage ability and good thermal reliability facilitated SA/PMMA to be considered as a viable candidate for thermal energy storage.The successful fabrication of SA/PMMA capsules indicates that ferric chloride is a prominent candidate for synthesizing PMMA containing PCM composite.

Investigation of phase-change materials for interior temperature regulation in public transport

Regulating the indoor temperature of public transport on hot sunny days is a prime concern,as both the external and internal heat sources play an active role in heat gain.Experimental studies have been carried out on a bus model using sodium sulphate decahydrate as a phase-change material(PCM)that is placed in between the ceiling and the roof.Studies are conducted on a sunny day and also for different cases of external(300-W surface heater)and internal(25-W light bulb)heat sources.The results show that PCM,in the presence of an external heat source,can help to keep the indoor temperature lower and delay the time period for increasing the temperature by absorbing heat during the phase change.On the other hand,the presence of the internal heat source contributes to a detrimental effect on the indoor temperature,which gradually increases with the elapse of time.With the combination of the external and internal heat sources,it is found that the internal heat source plays a dominating factor to raise the indoor temperature.It is revealed from the experimental results that a 12.7-mm single layer and a single PCM are not enough to counter the internal heat of 25 W unless the thickness of the PCM layer is increased to delay the increase in the indoor temperature.An additional PCM layer with a lower melting temperature could be placed at the inner portion of the ceiling to have effective thermal-energy storage by absorbing the substantial heat gain from the internal heat sources.

Experimental Study on Flow Boiling Heat Transfer Characteristics of Microencapsulated Phase Change Material Suspension

Due to its core phase change characteristics,microencapsulated phase change material(MPCM)can make many base fluids have better heat transfer characteristics.In this paper,the flow boiling heat transfer characteristics of fluorinated liquid-based microencapsulated phase change material suspension(MPCMS)through vertical transparent quartz channel were studied.The effects of MPCM core phase change temperature and suspension flow velocity on boiling heat transfer coefficient and critical heat flux were discussed,respectively.The results show that the appropriate concentration of MPCMS can enhance both the boiling heat transfer coefficient and the critical heat flux.The strengthening effect becomes weak with the increase of suspension flow velocity.The maximum strengthening rates of critical heat flux appear at 0.05 m/s,which are 25%(MPCMS(70℃)),16%(MPCMS(58℃))and 10%(MPCMS(28℃)).The phase change temperature of the MPCM core has important effects on the boiling heat transfer coefficient and the critical heat flux.The results showed that the MPCM with core phase change temperature higher than the boiling temperature of base fluid has the best enhancement effect.Different bubble behavior in vertical tube with different heat flux can be observed by high-speed photography system.The particle core phase change in MPCMS inhibits the aggregation of bubbles and forms many small bubbles to enhance heat transfer.The work lays a foundation for further exploring the industrial application of MPCMS.