The rupture behavior of electron beam physical vapour deposition（EBPVD） Ni/Ni3Al microlaminates composites subjected to tensile load were studied through the numerical method of finite element. 2D model and 3D model...The rupture behavior of electron beam physical vapour deposition（EBPVD） Ni/Ni3Al microlaminates composites subjected to tensile load were studied through the numerical method of finite element. 2D model and 3D model of EBPVD Ni/Ni3Al microlaminates with a centre crack were built respectively. A new scheme for building 3D crack point models was proposed and different types of elements were used. And stress intensity factors around the tip of the crack were obtained correspondingly. The results indicate that the key of the stress intensity factor for 2D model is presumably the average of the keys for 3D model in thickness and the key at the interface is the biggest, which suggests the propagation of the crack greatly likely happen at the interface.展开更多
Two substrates with surface roughness(Ra) of about 1.6 and 0.8,respectively,were employed to fabricate two NiCoCrAl/YSZ microlaminates by using EB-PVD method. The average ceramic-layer thicknesses of the two NiCoCrAl/...Two substrates with surface roughness(Ra) of about 1.6 and 0.8,respectively,were employed to fabricate two NiCoCrAl/YSZ microlaminates by using EB-PVD method. The average ceramic-layer thicknesses of the two NiCoCrAl/YSZ microlaminates are different,about 0.9 μm and 1.2 μm,respectively,but their average metal-layer thicknesses are equal,about 5 μm. The microstructures and fractographs were examined by SEM. Uniaxial tensile testing was performed to determine the mechanical properties. The results show that the microlaminate deposited on the relatively coarse substrate(MDCS) contains wavy layer interfaces and larger flaws,while the microlaminate deposited on the relatively smooth substrate(MDSS) has relatively flat layer interfaces and no larger flaws. The tensile specimens of the two microlaminates display obvious difference in tensile strengths and fracture modes. The ratio of strength of MDCS to that of MDSS is 0.5 at room temperature,0.67 at 700 ℃ and 1.33 at 1 000 ℃,increasing with increasing temperature. The factors which caused the variation of the strength ratio were discussed. It is found that the larger flaws in MDCS result in the relatively low strength ratio at room temperature and 700 ℃,and the wavy layer interface in MDCS is responsible for the relatively great strength ratio at 1 000 ℃.展开更多
Laterally continuous dark and orange microlaminations are observed in rock varnish from the northern Tianshan, Xinjiang. Microprobe chemical analyses indicate that dark layers in the varnish are rich in Mn and orange ...Laterally continuous dark and orange microlaminations are observed in rock varnish from the northern Tianshan, Xinjiang. Microprobe chemical analyses indicate that dark layers in the varnish are rich in Mn and orange layers are poor in Mn. Microscopic examinations of varnish ultra-thin sections reveal a lamination pattern that is regionally consistent and comparable. Based on geomorphic age control, the Holocene varnish lamination sequence is tentatively established and its paleoclimatic implications are explored within the framework of existing paleoclimatic data in the region.展开更多
文摘The rupture behavior of electron beam physical vapour deposition（EBPVD） Ni/Ni3Al microlaminates composites subjected to tensile load were studied through the numerical method of finite element. 2D model and 3D model of EBPVD Ni/Ni3Al microlaminates with a centre crack were built respectively. A new scheme for building 3D crack point models was proposed and different types of elements were used. And stress intensity factors around the tip of the crack were obtained correspondingly. The results indicate that the key of the stress intensity factor for 2D model is presumably the average of the keys for 3D model in thickness and the key at the interface is the biggest, which suggests the propagation of the crack greatly likely happen at the interface.
基金Project (90405016) supported by the National Natural Science Foundation of ChinaProject (20040213034) supported by the Research Fund for the Doctoral Program of Higher Education, China
文摘Two substrates with surface roughness(Ra) of about 1.6 and 0.8,respectively,were employed to fabricate two NiCoCrAl/YSZ microlaminates by using EB-PVD method. The average ceramic-layer thicknesses of the two NiCoCrAl/YSZ microlaminates are different,about 0.9 μm and 1.2 μm,respectively,but their average metal-layer thicknesses are equal,about 5 μm. The microstructures and fractographs were examined by SEM. Uniaxial tensile testing was performed to determine the mechanical properties. The results show that the microlaminate deposited on the relatively coarse substrate(MDCS) contains wavy layer interfaces and larger flaws,while the microlaminate deposited on the relatively smooth substrate(MDSS) has relatively flat layer interfaces and no larger flaws. The tensile specimens of the two microlaminates display obvious difference in tensile strengths and fracture modes. The ratio of strength of MDCS to that of MDSS is 0.5 at room temperature,0.67 at 700 ℃ and 1.33 at 1 000 ℃,increasing with increasing temperature. The factors which caused the variation of the strength ratio were discussed. It is found that the larger flaws in MDCS result in the relatively low strength ratio at room temperature and 700 ℃,and the wavy layer interface in MDCS is responsible for the relatively great strength ratio at 1 000 ℃.
文摘Laterally continuous dark and orange microlaminations are observed in rock varnish from the northern Tianshan, Xinjiang. Microprobe chemical analyses indicate that dark layers in the varnish are rich in Mn and orange layers are poor in Mn. Microscopic examinations of varnish ultra-thin sections reveal a lamination pattern that is regionally consistent and comparable. Based on geomorphic age control, the Holocene varnish lamination sequence is tentatively established and its paleoclimatic implications are explored within the framework of existing paleoclimatic data in the region.
