The problem of digital controlling of high frequency microplasma arc welding machine has been solved through Fujitsu 16-bits single-chip processor used.Digital welding power sources and their control systems,digital s...The problem of digital controlling of high frequency microplasma arc welding machine has been solved through Fujitsu 16-bits single-chip processor used.Digital welding power sources and their control systems,digital sequential control system,and digital man-machine interaction system were included in digital microplasma arc welding machine studied.Principles,which is about digital sequential control system,digital man-machine interaction system,digital controller and its interface,and controlling software program,were analyzed.It has been showed that full digitalization of high frequency microplasma arc welding machine was fulfilled,minimum welding current of the machine is 0.05A,and arc is stable and can been started unfailingly.展开更多
Wire arc additive manufacturing(WAAM)has been investigated to deposit large-scale metal parts due to its high deposition efficiency and low material cost.However,in the process of automatically manufacturing the high-...Wire arc additive manufacturing(WAAM)has been investigated to deposit large-scale metal parts due to its high deposition efficiency and low material cost.However,in the process of automatically manufacturing the high-quality metal parts by WAAM,several problems about the heat build-up,the deposit-path optimization,and the stability of the process parameters need to be well addressed.To overcome these issues,a new WAAM method based on the double electrode micro plasma arc welding(DE-MPAW)was designed.The circuit principles of different metal-transfer models in the DE-MPAW deposition process were analyzed theoretically.The effects between the parameters,wire feed rate and torch stand-off distance,in the process of WAAM were investigated experimentally.In addition,a real-time DE-MPAW control system was developed to optimize and stabilize the deposition process by self-adaptively changing the wire feed rate and torch stand-off distance.Finally,a series of tests were performed to evaluate the control system’s performance.The results show that the capability against interferences in the process of WAAM has been enhanced by this self-adaptive adjustment system.Further,the deposition paths about the metal part’s layer heights in WAAM are simplified.Finally,the appearance of the WAAM-deposited metal layers is also improved with the use of the control system.展开更多
基金Foundation item:Key Basic Research Project of Science and Technology Commission of Shanghai(10JC1406000)
文摘The problem of digital controlling of high frequency microplasma arc welding machine has been solved through Fujitsu 16-bits single-chip processor used.Digital welding power sources and their control systems,digital sequential control system,and digital man-machine interaction system were included in digital microplasma arc welding machine studied.Principles,which is about digital sequential control system,digital man-machine interaction system,digital controller and its interface,and controlling software program,were analyzed.It has been showed that full digitalization of high frequency microplasma arc welding machine was fulfilled,minimum welding current of the machine is 0.05A,and arc is stable and can been started unfailingly.
基金Supported by National Natural Science Foundation of China(Grant No.51665034).
文摘Wire arc additive manufacturing(WAAM)has been investigated to deposit large-scale metal parts due to its high deposition efficiency and low material cost.However,in the process of automatically manufacturing the high-quality metal parts by WAAM,several problems about the heat build-up,the deposit-path optimization,and the stability of the process parameters need to be well addressed.To overcome these issues,a new WAAM method based on the double electrode micro plasma arc welding(DE-MPAW)was designed.The circuit principles of different metal-transfer models in the DE-MPAW deposition process were analyzed theoretically.The effects between the parameters,wire feed rate and torch stand-off distance,in the process of WAAM were investigated experimentally.In addition,a real-time DE-MPAW control system was developed to optimize and stabilize the deposition process by self-adaptively changing the wire feed rate and torch stand-off distance.Finally,a series of tests were performed to evaluate the control system’s performance.The results show that the capability against interferences in the process of WAAM has been enhanced by this self-adaptive adjustment system.Further,the deposition paths about the metal part’s layer heights in WAAM are simplified.Finally,the appearance of the WAAM-deposited metal layers is also improved with the use of the control system.
