Urea-formaldehyde (UF) resin is widely used as an adhesive for the manufacture of a range of wood and fiber based products. Although the microstructure of this resin has been examined at high resolution by field-emiss...Urea-formaldehyde (UF) resin is widely used as an adhesive for the manufacture of a range of wood and fiber based products. Although the microstructure of this resin has been examined at high resolution by field-emission scanning electron microscopy and atomic force microscopy, transmission electron microscopy (TEM) has thus far not been used, perhaps because of difficulties in ultrathin sectioning this resin in cured (polymerized) state. In the technical note presented here, a novel sample preparation method is described which enabled us to examine the microstructural morphology of UF resin by transmission electron microscopy in ultrathin sections, revealing the presence of spherical particles within the resin. Our initial attempt to ultrathin section the resin directly was not successful as it was too brittle to trim blocks for sectioning. Then, we developed a sample preparation technique that involved impregnation ofPinus radiatawood tissues with the UF resin, and then embedding of resin impregnated wood tissues with Spurr’s low viscosity embedding medium, which has been widely employed in plant and wood ultrastructure work. The TEM images illustrated and the information on the microstructural morphology of the UF resin presented are based on this novel sample preparation approach.展开更多
Novel two-dimensional thermoelectric materials have attracted significant attention in the field of thermoelectric due to their low lattice thermal conductivity.A comprehensive understanding of their microscopic struc...Novel two-dimensional thermoelectric materials have attracted significant attention in the field of thermoelectric due to their low lattice thermal conductivity.A comprehensive understanding of their microscopic structures is crucial for driving further the optimization of materials properties and developing novel functional materials.Here,by using in situ scanning tunneling microscopy,we report the atomic layer evolution and surface reconstruction on the cleaved thermoelectric material KCu_(4)Se_(3) for the first time.We clearly revealed each atomic layer,including the naturally cleaved K atomic layer,the intermediate Se^(2-)atomic layer,and the Se^(-)atomic layer that emerges in the thermodynamic-stable state.Departing from the maj ority of studies that predominantly concentrate on macroscopic measurements of the charge transport,our results reveal the coexistence of potassium disorder and complex reconstructed patterns of selenium,which potentially influences charge carrier and lattice dynamics.These results provide direct insight into the surface microstructures and evolution of KCu_(4)Se_(3),and shed useful light on designing functional materials with superior performance.展开更多
To modulate the tunneling gap with the lock in amplifier in the scanning tunneling microscopy(STM), information of the tunneling current variation can be obtained. The local potential barrier distribution of graphite ...To modulate the tunneling gap with the lock in amplifier in the scanning tunneling microscopy(STM), information of the tunneling current variation can be obtained. The local potential barrier distribution of graphite surface atoms is got by means of such technology. Compared with STM image under topography observation mode, the local potential barrier image has higher resolution and less influence on the tip and better anti interference capability. Observed results of the graphite are given and discussed in this paper.展开更多
The adsorption and electronic properties of isolated cobalt phthalocyanine （CoPc） molecule on an ultrathin layer of NaC1 have been investigated. High-resolution STM images give a detailed picture of the lowest unocc...The adsorption and electronic properties of isolated cobalt phthalocyanine （CoPc） molecule on an ultrathin layer of NaC1 have been investigated. High-resolution STM images give a detailed picture of the lowest unoccupied molecular orbital （LUMO） of an isolated CoPc. It is shown that the NaC1 ultrathin layer efficiently decouples the interaction of the molecules from the underneath metal substrate, which makes it an ideal substrate for studying the properties of single molecules. Moreover, strong dependence of the appearance of the molecules on the sample bias in the region of relatively high bias （〉 3.1 V） is ascribed to the image potential states （IPSs） of NaCI/Cu（100）, which may provide us with a possible method to fabricate quantum storage devices.展开更多
文摘Urea-formaldehyde (UF) resin is widely used as an adhesive for the manufacture of a range of wood and fiber based products. Although the microstructure of this resin has been examined at high resolution by field-emission scanning electron microscopy and atomic force microscopy, transmission electron microscopy (TEM) has thus far not been used, perhaps because of difficulties in ultrathin sectioning this resin in cured (polymerized) state. In the technical note presented here, a novel sample preparation method is described which enabled us to examine the microstructural morphology of UF resin by transmission electron microscopy in ultrathin sections, revealing the presence of spherical particles within the resin. Our initial attempt to ultrathin section the resin directly was not successful as it was too brittle to trim blocks for sectioning. Then, we developed a sample preparation technique that involved impregnation ofPinus radiatawood tissues with the UF resin, and then embedding of resin impregnated wood tissues with Spurr’s low viscosity embedding medium, which has been widely employed in plant and wood ultrastructure work. The TEM images illustrated and the information on the microstructural morphology of the UF resin presented are based on this novel sample preparation approach.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.12374196,92165201,11634011,and 22109153)the Innovation Program for Quantum Science and Technology (Grant No.2021ZD0302800)+4 种基金the CAS Project for Young Scientists in Basic Research (Grant No.YSBR-046)the Fundamental Research Funds for the Central Universities (Grant Nos.WK3510000006 and WK3430000003)the Fund of Anhui Initiative in Quantum Information Technologies (Grant No.AHY170000)the University Synergy Innovation Program of Anhui Province,China (Grant No.GXXT-2022-008)the National Synchrotron Radiation Laboratory Joint Funds of University of Science and Technology of China (Grant No.KY2060000241)。
文摘Novel two-dimensional thermoelectric materials have attracted significant attention in the field of thermoelectric due to their low lattice thermal conductivity.A comprehensive understanding of their microscopic structures is crucial for driving further the optimization of materials properties and developing novel functional materials.Here,by using in situ scanning tunneling microscopy,we report the atomic layer evolution and surface reconstruction on the cleaved thermoelectric material KCu_(4)Se_(3) for the first time.We clearly revealed each atomic layer,including the naturally cleaved K atomic layer,the intermediate Se^(2-)atomic layer,and the Se^(-)atomic layer that emerges in the thermodynamic-stable state.Departing from the maj ority of studies that predominantly concentrate on macroscopic measurements of the charge transport,our results reveal the coexistence of potassium disorder and complex reconstructed patterns of selenium,which potentially influences charge carrier and lattice dynamics.These results provide direct insight into the surface microstructures and evolution of KCu_(4)Se_(3),and shed useful light on designing functional materials with superior performance.
文摘To modulate the tunneling gap with the lock in amplifier in the scanning tunneling microscopy(STM), information of the tunneling current variation can be obtained. The local potential barrier distribution of graphite surface atoms is got by means of such technology. Compared with STM image under topography observation mode, the local potential barrier image has higher resolution and less influence on the tip and better anti interference capability. Observed results of the graphite are given and discussed in this paper.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.21203239 and 21311120059)RFBR(Grant No.13-02-91180)
文摘The adsorption and electronic properties of isolated cobalt phthalocyanine （CoPc） molecule on an ultrathin layer of NaC1 have been investigated. High-resolution STM images give a detailed picture of the lowest unoccupied molecular orbital （LUMO） of an isolated CoPc. It is shown that the NaC1 ultrathin layer efficiently decouples the interaction of the molecules from the underneath metal substrate, which makes it an ideal substrate for studying the properties of single molecules. Moreover, strong dependence of the appearance of the molecules on the sample bias in the region of relatively high bias （〉 3.1 V） is ascribed to the image potential states （IPSs） of NaCI/Cu（100）, which may provide us with a possible method to fabricate quantum storage devices.
