Knowledge of the locations of seismic sources is critical for microseismic monitoring. Time-window-based elastic wave interferometric imaging and weighted- elastic-wave （WEW） interferometric imaging are proposed and...Knowledge of the locations of seismic sources is critical for microseismic monitoring. Time-window-based elastic wave interferometric imaging and weighted- elastic-wave （WEW） interferometric imaging are proposed and used to locate modeled microseismic sources. The proposed method improves the precision and eliminates artifacts in location profiles. Numerical experiments based on a horizontally layered isotropic medium have shown that the method offers the following advantages： It can deal with Iow-SNR microseismic data with velocity perturbations as well as relatively sparse receivers and still maintain relatively high precision despite the errors in the velocity model. Furthermore, it is more efficient than conventional traveltime inversion methods because interferometric imaging does not require traveltime picking. Numerical results using a 2D fault model have also suggested that the weighted-elastic-wave interferometric imaging can locate multiple sources with higher location precision than the time-reverse imaging method.展开更多
Microseismic monitoring has been widely used in mines for monitoring and predicting dynamic disasters such as rockbursts and waterbursts. However, to develop high-precision microseismic monitoring systems, the propaga...Microseismic monitoring has been widely used in mines for monitoring and predicting dynamic disasters such as rockbursts and waterbursts. However, to develop high-precision microseismic monitoring systems, the propagation patterns of microseismic waves under complex geological conditions must be elucidated. To achieve this aim, a simulation model of a typical coalmine was designed using similar materials according to the similarity theory to simulate the mining process. Geophones were embedded into the model to detect the propagation of elastic waves from microseisms. The results show that in an unmined solid rock mass, the wave velocity in shallow rock strata is mainly affected by geologically weak planes, whereas in deep strata it is affected mainly by the density of the rock mass. During propagation, the amplitude first decreases and then increases rapidly with increasing propagation distance from the coal layer. After mining, our results indicate that the goaf causes significant attenuation of the wave velocity. After the goaf was backfilled, the velocity attenuation is reduced to some extent but not eliminated. The results of this study can be used as guidelines for designing and applying microseismic monitoring systems in mines.展开更多
Distributed Acoustic Sensing(DAS) is an emerging technique for ultra-dense seismic observation, which provides a new method for high-resolution sub-surface seismic imaging. Recently a large number of linear DAS arrays...Distributed Acoustic Sensing(DAS) is an emerging technique for ultra-dense seismic observation, which provides a new method for high-resolution sub-surface seismic imaging. Recently a large number of linear DAS arrays have been used for two-dimensional S-wave near-surface imaging in urban areas. In order to explore the feasibility of three-dimensional(3D) structure imaging using a DAS array, we carried out an active source experiment at the Beijing National Earth Observatory. We deployed a 1 km optical cable in a rectangular shape, and the optical cable was recast into 250 sensors with a channel spacing of 4 m. The DAS array clearly recorded the P, S and surface waves generated by a hammer source. The first-arrival P wave travel times were first picked with a ShortTerm Average/Long-Term Average(STA/LTA) method and further manually checked. The P-wave signals recorded by the DAS are consistent with those recorded by the horizontal components of short-period seismometers. At shorter source-receiver distances, the picked P-wave arrivals from the DAS recording are consistent with vertical component recordings of seismometers, but they clearly lag behind the latter at greater distances.This is likely due to a combination of the signal-to-noise ratio and the polarization of the incoming wave. Then,we used the Tomo DD software to invert the 3D P-wave velocity structure for the uppermost 50 m with a resolution of 10 m. The inverted P-wave velocity structures agree well with the S-wave velocity structure previously obtained through ambient noise tomography. Our study indicates the feasibility of 3D near-surface imaging with the active source and DAS array. However, the inverted absolute velocity values at large depths may be biased due to potential time shifts between the DAS recording and seismometer at large source-receiver distances.展开更多
A new source location method using wave-equation based traveltime inversion is proposed to locate microseismic events accurately. With a sourceindependent strategy, microseismic events can be located independently reg...A new source location method using wave-equation based traveltime inversion is proposed to locate microseismic events accurately. With a sourceindependent strategy, microseismic events can be located independently regardless of the accuracy of the source signature and the origin time. The traveltime-residuals-based misfit function has robust performance when the velocity model is inaccurate. The new Fréchet derivatives of the misfit function with respect to source location are derived directly based on the acoustic wave equation, accounting for the influence of geometrical perturbation and spatial velocity variation. Unlike the mostly used traveltime inversion methods, no traveltime picking or ray tracing is needed.Additionally, the improved scattering-integral method is applied to reduce the computational cost. Numerical tests show the validity of the proposed method.展开更多
Internal waves transport material and energy from the upper water column to the deep ocean, disturbing seabed sediments and resulting in phenomena such as seabed erosion and changes in topography. On the northern slop...Internal waves transport material and energy from the upper water column to the deep ocean, disturbing seabed sediments and resulting in phenomena such as seabed erosion and changes in topography. On the northern slope of the South China Sea and in many coastal margins worldwide, the zones with internal wave action closely overlap with areas where natural gas hydrates are present. However, due to significant differences in the spatial and temporal scales, understanding the influence of internal waves on methane releases from deep seabeds is challenging. In this study, in situ observations of seabed microseismicity and internal waves are conducted at water depths of 655 meters and 1450 meters in the Pearl River Canyon of the South China Sea. The microseismicity caused by internal waves and seabed methane releases is identified, and a method to establish the correlation between internal waves and seabed methane releases through the use of microseismic recordings is proposed, aiming to obtain direct observational evidence of internal waves intensifying seabed methane releases. The results show that internal waves and seabed methane releases generate significant microseismic signals, indicating the continuous influence of internal waves on the deep seabed of the northern slope of the South China Sea and revealing active methane release phenomena on the seabed. At both long and short time scales, internal waves increase the frequency of seabed methane releases by 4.2 times and 2.4 times, respectively, while also enhancing the intensity of these releases. These changes are influenced by the alterations in seabed flow velocity, pressure, and temperature that are induced by internal wave activities. This study emphasizes that microseismic signals are effective carriers of information for multiscale geological processes on seabeds and suggests that internal waves exacerbate marine geological hazards and contribute to global climate change by intensifying seabed methane releases.展开更多
基金supported by the R&D of Key Instruments and Technologies for Deep Resources Prospecting(No.ZDYZ2012-1)National Natural Science Foundation of China(No.11374322)
文摘Knowledge of the locations of seismic sources is critical for microseismic monitoring. Time-window-based elastic wave interferometric imaging and weighted- elastic-wave （WEW） interferometric imaging are proposed and used to locate modeled microseismic sources. The proposed method improves the precision and eliminates artifacts in location profiles. Numerical experiments based on a horizontally layered isotropic medium have shown that the method offers the following advantages： It can deal with Iow-SNR microseismic data with velocity perturbations as well as relatively sparse receivers and still maintain relatively high precision despite the errors in the velocity model. Furthermore, it is more efficient than conventional traveltime inversion methods because interferometric imaging does not require traveltime picking. Numerical results using a 2D fault model have also suggested that the weighted-elastic-wave interferometric imaging can locate multiple sources with higher location precision than the time-reverse imaging method.
基金financially supported by the State Key Research Development Program of China (No. 2016YFC0801408)the National Natural Science Foundation of China (No. 51674014)the Key Project of National Natural Science Foundation of China (No. 51634001)
文摘Microseismic monitoring has been widely used in mines for monitoring and predicting dynamic disasters such as rockbursts and waterbursts. However, to develop high-precision microseismic monitoring systems, the propagation patterns of microseismic waves under complex geological conditions must be elucidated. To achieve this aim, a simulation model of a typical coalmine was designed using similar materials according to the similarity theory to simulate the mining process. Geophones were embedded into the model to detect the propagation of elastic waves from microseisms. The results show that in an unmined solid rock mass, the wave velocity in shallow rock strata is mainly affected by geologically weak planes, whereas in deep strata it is affected mainly by the density of the rock mass. During propagation, the amplitude first decreases and then increases rapidly with increasing propagation distance from the coal layer. After mining, our results indicate that the goaf causes significant attenuation of the wave velocity. After the goaf was backfilled, the velocity attenuation is reduced to some extent but not eliminated. The results of this study can be used as guidelines for designing and applying microseismic monitoring systems in mines.
基金supported by the National Key R&D Program of China(2022YFC3102202)the Chinese Academy of Sciences (CAS) Project for Young Scientists in Basic Research (YSBR-020)。
文摘Distributed Acoustic Sensing(DAS) is an emerging technique for ultra-dense seismic observation, which provides a new method for high-resolution sub-surface seismic imaging. Recently a large number of linear DAS arrays have been used for two-dimensional S-wave near-surface imaging in urban areas. In order to explore the feasibility of three-dimensional(3D) structure imaging using a DAS array, we carried out an active source experiment at the Beijing National Earth Observatory. We deployed a 1 km optical cable in a rectangular shape, and the optical cable was recast into 250 sensors with a channel spacing of 4 m. The DAS array clearly recorded the P, S and surface waves generated by a hammer source. The first-arrival P wave travel times were first picked with a ShortTerm Average/Long-Term Average(STA/LTA) method and further manually checked. The P-wave signals recorded by the DAS are consistent with those recorded by the horizontal components of short-period seismometers. At shorter source-receiver distances, the picked P-wave arrivals from the DAS recording are consistent with vertical component recordings of seismometers, but they clearly lag behind the latter at greater distances.This is likely due to a combination of the signal-to-noise ratio and the polarization of the incoming wave. Then,we used the Tomo DD software to invert the 3D P-wave velocity structure for the uppermost 50 m with a resolution of 10 m. The inverted P-wave velocity structures agree well with the S-wave velocity structure previously obtained through ambient noise tomography. Our study indicates the feasibility of 3D near-surface imaging with the active source and DAS array. However, the inverted absolute velocity values at large depths may be biased due to potential time shifts between the DAS recording and seismometer at large source-receiver distances.
文摘A new source location method using wave-equation based traveltime inversion is proposed to locate microseismic events accurately. With a sourceindependent strategy, microseismic events can be located independently regardless of the accuracy of the source signature and the origin time. The traveltime-residuals-based misfit function has robust performance when the velocity model is inaccurate. The new Fréchet derivatives of the misfit function with respect to source location are derived directly based on the acoustic wave equation, accounting for the influence of geometrical perturbation and spatial velocity variation. Unlike the mostly used traveltime inversion methods, no traveltime picking or ray tracing is needed.Additionally, the improved scattering-integral method is applied to reduce the computational cost. Numerical tests show the validity of the proposed method.
基金supported by the National Natural Science Foundation of China (Grant No.41831280)。
文摘Internal waves transport material and energy from the upper water column to the deep ocean, disturbing seabed sediments and resulting in phenomena such as seabed erosion and changes in topography. On the northern slope of the South China Sea and in many coastal margins worldwide, the zones with internal wave action closely overlap with areas where natural gas hydrates are present. However, due to significant differences in the spatial and temporal scales, understanding the influence of internal waves on methane releases from deep seabeds is challenging. In this study, in situ observations of seabed microseismicity and internal waves are conducted at water depths of 655 meters and 1450 meters in the Pearl River Canyon of the South China Sea. The microseismicity caused by internal waves and seabed methane releases is identified, and a method to establish the correlation between internal waves and seabed methane releases through the use of microseismic recordings is proposed, aiming to obtain direct observational evidence of internal waves intensifying seabed methane releases. The results show that internal waves and seabed methane releases generate significant microseismic signals, indicating the continuous influence of internal waves on the deep seabed of the northern slope of the South China Sea and revealing active methane release phenomena on the seabed. At both long and short time scales, internal waves increase the frequency of seabed methane releases by 4.2 times and 2.4 times, respectively, while also enhancing the intensity of these releases. These changes are influenced by the alterations in seabed flow velocity, pressure, and temperature that are induced by internal wave activities. This study emphasizes that microseismic signals are effective carriers of information for multiscale geological processes on seabeds and suggests that internal waves exacerbate marine geological hazards and contribute to global climate change by intensifying seabed methane releases.
