Dual-Polarized Slot-Coupled Microstrip Antenna with Very High Isolation

A wideband dual-polarized slot-coupled stacked microstrip antenna with very high isolation and low cross-polarization is presented. To improve isolation between two poiarization ports, the stacked patches are excited by an open-ended and a T-shaped microstrip lines both via two H-shaped slots placed in a ＂T＂ configuration. The measured isolation is better than 40.5 dB over the bandwidth from 8.8 to 9.8 GHz with cross-polarization level less than - 28.5 dB. The measured VSWR ≤ 2 bandwidths reach 20.7 96 and 19.196 at the verrical and horizontal polarization ports, respectively. This antenna is suitable to be used as array elements in spacebome synthetic aperture radars （SAR） and active phased array radars.

Strain-Insensitive Hierarchically Structured Stretchable Microstrip Antennas for Robust Wireless Communication

As the key component of wireless data transmission and powering,stretchable antennas play an indispensable role in flexible/stretchable electronics.However,they often suffer from frequency detuning upon mechanical deformations;thus,their applications are limited to wireless sensing with wireless transmission capabilities remaining elusive.Here,a hierarchically structured stretchable microstrip antenna with meshed patterns arranged in an arched shape showcases tunable resonance frequency upon deformations with improved overall stretchability.The almost unchanged resonance frequency during deformations enables robust on-body wireless communication and RF energy harvesting,whereas the rapid changing resonance frequency with deformations allows for wireless sensing.The proposed stretchable microstrip antenna was demonstrated to communicate wirelessly with a transmitter(input power of−3 dBm)efficiently(i.e.,the receiving power higher than−100 dBm over a distance of 100 m)on human bodies even upon 25%stretching.The flexibility in structural engineering combined with the coupled mechanical-electromagnetic simulations,provides a versatile engineering toolkit to design stretchable microstrip antennas and other potential wireless devices for stretchable electronics.

Corner Fed Microstrip Antenna Analysisfor Dual Polarization

This paper investigates a corner fed microstrip patch antenna by means of the cavity model with proposed feed modeling. The input impedance and radiation patterns for a corner feed are calculated. The mutual coupling between two corner feeds is investigated. An improvement in mutual coupling has been found for corner feeds relative to edge feeds, which is helpful for the design of dual polarized antenna arrays in wireless communication and radar applications.

Performance Optimization of Microstrip Antenna with Different Slot Configurations and Various Dielectric Materials

The probe-fed patch antennas were proposed by changing the parameters such as dielectric materials and dimensions of patch for detail investigation of changes in output characteristics. Four rectangular slots were introduced separately for optimizing the antenna design and characteristics. This study illustrated the changes of output characteristics of an antenna with respect to the number of introduced slots on the radiating patch in addition to the effect of various dielectric materials on antenna performances. The antenna performances were analyzed by plotting the observation of various dielectric materials. The changes of antenna characteristics were also observed by introducing four numbers of slots on each edge of the patch to improve radiation characteristics with a wider impedance bandwidth.

Novel Fractal DGS Based on MEMS and Its Application in Miniaturization of Microstrip Antenna Array

An uncommon fractal construction method is applied in the microwave element design. A novel fractal defected ground structure （DGS） based on micro electro-mechanical system （MEMS） is proposed. The size of this novel fractal DGS can achieve 86% size reduction compared with the conventional dumbbell type DGS. This novel fractal DGS is used in the miniaturization design of L-band microstrip antenna array. The simulation result shows that this novel fractal DGS can effectively reduce the mutual coupling between the antenna elements, so it is helpful to the miniaturization of microstrip array, namely the approximately same gain value can be achieved with the shorter distance between elements.

Dual-Frequency Operation of Bow-Tie Microstrip Antenna

Characteristics of a single-feed dual-frequency bow-tie microstrip antenna are studied. By using the variation method, simple formulas for resonant frequencies of the bow-tie microstrip antenna are derived. It is shown that the dual-frequency ratio can be controlled easily by choosing the parameters of the antenna. This design gives compact antenna size and simple antenna structure. Experimental results are presented, verifying the validity of the design.

Design of MEMS C-Band Microstrip Antenna Array Based on High-Resistance Silicon for Intelligent Ammunition

In recent years, microstrip antennas have been more widely applied in satellite communications, mobile phones, unmanned aerial vehicle （UAV）, and weapons. A micro-electro-mechanical systems-based （MEMS-based） high-resistance silicon C-band microstrip antenna array has been designed for the intelligent ammunition. The center frequency is 4.5 GHz. A cavity has been designed in substrate to reduce the dielectric constant of silicon and high-resistance silicon has been used as the material of substrate to improve the gain of antenna. It is very easy to be manufactured by using MEMS technology because of the improved structure of the antenna. The results show that the gain of the antenna is 8 dB and voltage standing wave ratio （VSWR） is less than 2 by the analysis and simulation in high freauencv structure simulator （HFSS）.

Notched Triangular Microstrip Antenna for Dual-Frequency Operation

A novel equilateral triangular patch with a rectangular notch etched to one radiating edge on organic magnetic substrate is proposed for dual frequency operation. Both operations of these dual frequencies arise from the perturbation of TM 10 and TM 11 mode by simply cutting a rectangular notch at the patch bottom. Simulations and experiments have shown the validity of this design. Using an organic magnetic material as the substrate, the antenna exhibits a broader bandwidth of 5.5% and 4.7% at dual-frequencies 1.56 GHz and 2.45 GHz, respectively, as well as a reduced size compared to the dual-frequency patch antennas on non-magnetic material.

EFFICIENT ANALYSIS OF ELECTROMAGNETIC RADIATION FROM MICROSTRIP ANTENNA USING VOLUME-SURFACE CURRENT CONTUNUITY METHOD

The Volume-Surface Current Continuity Method (VSCCM) is presented to analyze electromagnetic radiation from microstrip antenna. The microstrip antenna is discretized into small triangular patches on conducting surface and tetrahedral volume cells in dielectric region. The Method of Moments (MoM) is applied to solve the integral equation. An equation contains the restriction relation between the volume and surface current coefficient is derived from the current continuity equation at those parts where the conducting surface is in contact with the dielectric material. A simple equivalent strip model is introduced in the treatment of the feeding probe in VSCCM. The VSCCM can reduce the unknowns required to be solved in MoM, as well as the condition number of the matrix equation. Numerical results are given to validate the accuracy and efficiency of this method.

Low-Cost Metamaterial Loaded Microstrip Antenna for Defense Applications

We have designed a Metamaterial unit-cell for 9 GHz frequency. Periodic structure was used at 4.25 × 4.25 mm with a thickness of 0.35 mm and giving us the 99.99% of absorbance at 9 GHz in simulated results. We have implemented a rectangular microstrip antenna and loaded it with Metamaterial unit-cells which provided improved results. There were results available for reflection coefficient (s11 parameter) at 9 GHz and also helping for the reduction of the Radar Cross Section of an antenna, which reduced more than 20 dB and not affected its directivity and gain.

Electromagnetic coupling reduction in dual-band microstrip antenna array using ultra-compact single-negative electric metamaterials for MIMO application

In this paper, an ultra-compact single negative（SNG） electric waveguided metamaterial（WG-MTM） is first investigated and used to reduce the mutual coupling in E ＆ H planes of a dual-band microstrip antenna array. The proposed SNG electric WG-MTM unit cell is designed by etching two different symmetrical spiral lines on the ground, and has two stopbands operating at 1.86 GHz and 2.40 GHz. The circuit size is very compact, which is only λ_0/33.6 ×λ_0/15.1（where λ_0 is the wavelength at 1.86 GHz in free space）. Taking advantage of the dual-stopband property of the proposed SNG electric WG-MTM, a dual-band microstrip antenna array operating at 1.86 GHz and 2.40 GHz with very low mutual coupling is designed by embedding a cross shaped array of the proposed SNG electric WG-MTM. The measured and simulated results of the designed dual-band antenna array are in good agreement with each other, indicating that the mutual coupling of the fabricated dual-band antenna array realizes 9.8/11.1 d B reductions in the H plane, 8.5/7.9 d B reductions in the E plane at1.86 GHz and 2.40 GHz, respectively. Besides, the distance of the antenna elements in the array is only 0.35 λ_0（where λ_0 is the wavelength at 1.86 GHz in free space）. The proposed strategy is used for the first time to reduce the mutual coupling in E ＆ H planes of the dual-band microstrip antenna array by using ultra-compact SNG electric WG-MTM.

The Isolation of Dual-Polarization Multiplex Microstrip Antennas

A simple theory is developed for the analysis of isolation of dual-polarization multiplex microstrip antennas. The analysis is based on the 'cavity model' and the 'reaction principle'. The shape of the field distribution between the patch and ground plane is assumed to be well approximated by that of the resonant modes of a corresponding magnetic and electric walled cavity. Two element microstrip antennas of various geometries for either transmitting or receiving linearly and circularly polarized waves are studied. Some methods are found to reduce their physical dimensions and to evaluate the isolation between the elements for various configurations.

Input Impedance of a Tunable Rectangular Microstrip Antenna

Input Impedance of a Tunable Rectangular Microstrip Antenna...

The Effect of Laminate Angles in Composite Substrates on the Performance of Rectangular Microstrip Antenna

The performance of a microstrip antenna has been known sensitive to substrate’s dielectric properties, which is dependent on the angle of laminate layers inside a composite laminated substrate. Modal analysis in spectral domain is applied to investigate the resonant frequency and radiation pattern of rectangular microstrip antenna on composite substrates. It is shown that the substrate’s dielectric properties are dependent upon the laminate angles, i.e., upon the orientation of the antenna relative to the substrate’s fiber direction. For the same operating frequency, the antenna size on composite substrates is larger than that on isotropic substrates, and the far field pattern is also more directional.

On the Design of Slot Cut Circularly Polarized Circular Microstrip Antennas

Circularly polarized microstrip antenna is frequently realized by cutting the slot inside the patch and feeding it along the diagonal axis. In the reported literature, procedure to design them at any given frequency is not available. In proposed work, circularly polarized slot cut circular microstrip antenna at 900 MHz is discussed. By studying the surface current distributions at two orthogonal modes, formulations in their resonant length are proposed. The frequencies calculated using them closely agree with simulated results. Using proposed formulation, procedure to design circular polarized antennas at different frequencies is presented that gives circular polarized response. Thus, proposed work will be helpful to design similar circular polarized circular microstrip antenna at any desired frequency.

A BROADBAND APERTURE-COUPLED STACKED MICROSTRIP ANTENNA WITH BOTH PATCHES NOTCHED AND OFFSET

This paper proposes a new approach to further improving the bandwidth of a typical aperture-coupled stacked microstrip antenna by cutting triangular notches in the radiating sides of both radiating patches together with offsetting both patches. An antenna applying this new approach is designed,fabricated,and tested. The experimental antenna could achieve a measured impedance bandwidth of about 37.5% for the Voltage Standing Wave Ratio(VSWR) ≤ 2in X-band.

Design and Analysis of Microstrip Antenna Arrays in Composite Laminated Substrates

In high performance aerospace systems where weight and aerodynamics are of major concern, fiber reinforced composite laminates can be tailored to achieve desirable mechanical properties and accommodate low-profile microstrip antenna. This work aims at the analysis of microstrip antenna array embedded in composite laminated substrates. The size of a single antenna is first calculated by spectral domain analysis to model the effects of the substrate’s electromagnetic property and the orientation of the laminate layers. The antenna array as well as the feed network, composed of microstrip transmission lines, quarter wave-length impedance transformers, and T-junction power dividers, is then tuned to accommodate the effects of the coupling between the antenna elements and the feed network loss. The performance of the 1 × 2, 1 × 4, and 1 × 8 linear array and 2 × 2 and 2 × 4 planar array are shown to have better directivity when embedded in composite laminated substrate compared with those when attached on isotropic substrate. Both 1 × 2 and 1 × 4 arrays at 2.4 GHz are validated experimentally to achieve better coverage.

Mutual coupling suppression of aperture coupled microstrip antenna array

本文提出了一种在金属板开4个半圆缝隙来抑制微带天线阵阵元之间耦合的方法.微带天线阵为4单元结构,天线为双层介质层.通过在圆形贴片45°方向开矩形缝隙来实现圆极化特性,利用孔径耦合馈电及反向馈电原理,保证相邻的2个单元均有90°相位差.在金属板上对称地开4个半圆形缝隙切断了单元间的耦合电流场,抑制了表面波,降低了单元间的耦合效应.仿真结果显示,当在接地板上对称地开4个半圆形缝隙后,微带天线阵的耦合系数明显降低,旁瓣与后瓣电平被有效地抑制,天线的增益增加.因此,这是一个十分有效的抑制微带天线阵阵元间耦合的方法.

Rectangular Microstrip Antenna with Air Cavity for High Gain and Improved Front to Back Ratio

A rectangular microstrip patch antenna using conventional Poly Tetra Fluride Ethelene (PTFE) substrate with air cavity is proposed and theoretically investigated. Considerably high gain along with improved front to back radiation isolation is demonstrated using such proposed antenna. The radiation performance of this new antenna has been compared to a conventional microstrip patch for some commonly used aspect ratios (width to length ratio). Compared to conventional microstrip antenna the proposed configuration shows more than 12% increment in peak gain and more than 10% increment in front to back radiation performance in each set of aspect ratio. The elucidation of such improvement in the radiation characteristics of the proposed antenna is also presented.

Effect of Partial Ground Plane Removal on the Radiation Characteristics of a Microstrip Antenna

This study presents a new, simple method for reducing the back-lobe radiation of a microstrip antenna (MSA) by a partially removed ground plane of the antenna. The effect of the partial ground plane removal in different configurations on the radiation characteristics of a MSA are investigated numerically. The partial ground plane removal reduces the backlobe radiation of the MSA by suppressing the surface wave diffraction from the edges of the antenna ground plane. For further improving the front-to-back (F/B) ratio of the MSA, a new soft-surface configuration consisting of an array of stand-up split ring resonators (SRRs) are placed on a bare dielectric substrate near the two ground plane edges. Compared to the F/B ratio of a conventional MSA with a full ground plane of the same size, an improved F/B ratio of 9.7 dB has been achieved experimentally for our proposed MSA.