Microwave irradiation-induced alterations in physicochemical properties and methane adsorption capability of coals:An experimental study using carbon molecular sieve

In order to comprehend the applicability of microwave irradiation for recovering coalbed methane,it is necessary to evaluate the microwave irradiation-induced alterations in coals with varying levels of metamorphism.In this work,the carbon molecular sieve combined with KMnO_(4)oxidation was selected to fabricate carbon molecular sieve with diverse oxidation degrees,which can serve as model substances toward coals.Afterwards,the microwave irradiation dependences of pores,functional groups,and highpressure methane adsorption characteristics of model substances were studied.The results indicated that microwave irradiation causes rearrangement of oxygen-containing functional groups,which could block the micropores with a size of 0.40-0.60 nm in carbon molecular sieve;meanwhile,naphthalene and phenanthrene generated by macro-molecular structure pyrolysis due to microwave irradiation could block the micropores with a size of 0.70-0.90 nm.These alterations in micropore structure weaken the saturated methane adsorption capacity of oxidized carbon molecular sieve by 2.91%-23.28%,suggesting that microwave irradiation could promote methane desorption.Moreover,the increased mesopores found for oxidized carbon molecular sieve after microwave irradiation could benefit CH4 diffusion.In summary,the oxidized carbon molecular sieve can act as model substances toward coals with different ranks.Additionally,microwave irradiation is a promising technology to enhance coalbed methane recovery.

Elucidation of the structure, antioxidant, and interfacial properties of flaxseed proteins tailored by microwave treatment

The microwave treatment is commonly applied to flaxseed to release nutrients, inactivate enzymes, remove cyanogens,and intensify flavors. The current study aimed to explore the influences of microwave exposure on the antioxidant and interfacial properties of flaxseed protein isolates(FPI), focusing on the altering composition and molecular structure.The results showed that after microwave exposure(700 W, 1–5 min), more compact assembly of storage proteins and subsequent permeation by membrane fragments of oil bodies occurred for cold-pressing flaxseed flours. Moreover, the particle sizes of FPI was progressively reduced with the decrement ranged from 37.84 to 60.66%(P<0.05), whereas the zeta potential values initially decreased and then substantially recovered during 1–5 min of microwave exposure. The conformation unfolding, chain cross-linking, and depolymerization were sequentially induced for FPI based on the analysis of fluorescence emission spectra, secondary structure, and protein subunit profiles, thereby affecting the dispersion or aggregation properties between albumin and globulin fractions in FPI. Microwave exposure retained specific phenolic acids and superior in vitro antioxidant activities of FPI. The inferior gas–water interface absorption and the loose/porous assembly structure were observed for the foams prepared by FPI, concurrent with obviously shrinking foaming properties upon microwave exposure. Improving oil–water interface activities of FPI produced the emulsion droplets with descending sizes and dense interface coating, which were then mildly destabilized due to the lipid leakage and weakened rheological behavior with microwave exposure extended to 5 min. Our findings elucidated that microwave treatment could tailor the application functionality of protein fractions in flaxseed based on their in situ structural remodeling.

Preparation and Microwave Absorbing Properties of Double-layer Fine Iron Tailings Cementitious Materials

To develop the microwave absorbing(MA)properties of cementitious material mixed with mine solid waste,the iron tailings cementitious microwave absorbing materials were prepared.The iron tailings was treated into different particle sizes by planetary ball mill,and the physicochemical properties of iron tailings were tested by laser particle size analyzer and scanning electron microscope(SEM).The electromagnetic parameters of iron tailings cementitious materials were characterized by a vector network analyzer and simulated MA properties,and the MA properties of iron tailings-cement composite system with steel fiber as absorber was studied.Based on the design of the single-layer structure,optimum mix ratio and thickness configuration method of double-layer structure were further studied,meanwhile,the mechanical properties and engineering application were analyzed and discussed.The results show that the particle size of iron tailings can afiect its electromagnetic behavior in cementitious materials,and the smaller particles lead the increase of demagnetisation efiect induced by domain wall motion and achieve better microwave absorbing properties in cementitious materials.When the thickness of matching layer and absorbing layer is 5 mm,the optimized microwave absorbing properties of C1/C3 double-layer cementitious material can obtain optimal RL value of-27.61 dB and efiective absorbing bandwidth of 0.97 GHz,which attributes to the synergistic efiect of impedance matching and attenuation characteristics.The double-layer microwave absorbing materials obtain excellent absorbing properties and show great design flexibility and diversity,which can be used as a suitable candidate for the preparation of favorable microwave absorbing cementitious materials.

Electromagnetic and microwave absorbing properties of FeCoB powder composites

The electromagnetic and microwave absorbing properties of FeCoB powder composites prepared by sin- gle-roller melt-spinning and mechanical milling processes were investigated in this paper. The result indicates that the flake-like powders are obtained. As milling time increases, the flake-like powder particles tend to agglomerate, causing the flake-like powders decrease gradually. The milling time plays an important role in the electromagnetic parameters which relates to the shape and size of the powder particles. The calculation shows that the sample milled for 6 h could achieve an optimal reflection loss of -11.5 dB at 5.8 GHz, with mass fraction of 83 % and a matching thickness of 1.8 mm. The result also indicates that the microwave absorbing properties of the FeCoB powder composites are adjustable by changing their thickness, and can be applied as a thinner microwave absorbing material in the range of 2-8 GHz.

Microstructure and microwave electromagnetic properties of Dy^(3+)-doped W-type hexaferrites

Ba 1 x Dy x Co 2 Fe 16 O 27 （x = 0.00, 0.05, 0.10, 0.15, and 0.20） was prepared by the solid-state method. The phase structure was studied using powder X-ray diffraction （XRD）, the electromagnetic properties were measured, and the reflection loss of Dy 3＋ -doped ferrite material was calculated using electromagnetic parameters by the transmission line theory. All XRD patterns showed the single phase of the magnetoplumbite barium ferrite without other intermediate phase when x ≤ 0.15. The values of ε ′ and ε ″ increased slightly with Dy 3＋ ions doping. The values of μ″ and μ′ were improved with Dy 3＋ doping, exhibiting excellent microwave magnetic performance. The reasons have also been discussed using the electromagnetic theory. Dy substitution could increase microwave-absorbing performance and broaden frequency band （reflection loss （RL） -10 dB）, and the absorbing peak shifted to high-frequency position. When x = 0.2, ferrite layer exhibited the most excellent microwave-absorbing performance at a thin matching thickness of 1.5 mm. The peak value of RL was around -15 dB, and the frequency band （RL -10 dB） was about 7 GHz （from 8 to 15 GHz）.

Manufacture of Zn-Co Substituted Y-Type Barium Hexagonal Ferrites by Citrate Precursor Route and Their Microwave Properties

Ba2ZnxCo2-xFe12O22 hexaferrites with x = 0.0, 0.4, 0.8, 1.2, 1.6 and 2.0 were prepared by citrate sol-gel process. The complex dielectric constant and complex permeability of hexaferrites were studied as functions of the measuring frequency, composition and sintering temperature in the range 100 MHz similar to 6 GHz. The natural resonance phenomenon is observed in mu' spectrum for all Y-type hexaferrites, which resonance frequency is dependent on zinc content and firing temperature. The natural resonance frequencies Of Co2Y hexaferrite were calculated, which is in agreement with the measuring results. The reflection loss of those ferrites is measuring frequency as well as absorber thickness dependent, and the higher the frequency and the thickness are, the higher the reflection loss is.

Microwave assisted synthesis & properties of nano HA-TCP biphasic calcium phosphate

Biphasic calcium phosphate （BCP） nanopowders were synthesized by using microwave and non-microwave irradiation assisted processes. The synthesized powders were pressed under a pressure of 90 MPa, and then were sintered at 1000-1200℃ for 1 h. The mechanical properties of the samples were investigated. The formed phases and microstructures were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results showed that the synthesis time was shorter, along with a more homogeneous microstructure, when the microwave irradiation assisted method was applied. The compression strength and the Young＇s modulus of the samples synthesized with microwave irradiation were about 60 MPa and 3 GPa, but those of the samples synthesized without microwave irradiation were about 30 MPa and 2 GPa, respectively. XRD patterns of the microwave irradiation assisted and non-microwave irradiation assisted nanopowders showed the coexistence of hydroxyapatite （HA） and lricalcium phosphate （TCP） phases in the system.

Effects of Silane Coupling Agent on Microstructure and Mechanical Properties of EPDM/Carbonyl Iron Microwave Absorbing Patch

The effects of types and amounts of silane coupling agent on mechanical properties of vuleanized rubber microwave absorbing patch （VRMAP） were studied. The mechanisms of silane coupling agent＇s effects on mechanical properties of rubber microwave absorbing patch （ RMAP ） and microvave absorbing patch＇s （MAP＇s） mierostrueture were also discussed by using SEM and FT-IR. The experimental results show that the tensile strength of RMAP could be increased through adding the filler of carbonyl iron powder （CIP） modified by silane coupling agent. RMAP fiUed with CIP, which was treated by silane coupling agent KH550, possessed a high tensile strength of 11.5 MPa, which was 448% more than that of MAP whose filler wus not modified by any coupling agent. It was found that the optimal amount of KH550 was 1.0 phr to 100.0 phr carbonyl iron powder. The effects of different modifying techniques on RMAP＇s mechanical properties were also inrestigated. It is indieated that MAP whose filler is modified by the wet process has the highest tensile strength, but it is not the optimal modiifying technique due to complieated wet process. On the contrary, the dry process was very simple, and VRMAP possessed fairly high mechanical properties, therefore, it was the perfect modifying process.

Effect of microwave treatment on tensile properties of sugar palm fibre reinforced thermoplastic polyurethane composites

The effect of microwave treatment on the tensile properties of treated sugar palm fibre with 6% NaOH reinforced thermoplastic polyurethane composites was investigated. Firstly, the sugar palm fibres were treated by 6% alkali solution. Then, microwave treatment was used to treat the alkali treated sugar palm fibres. Three types of temperatures(i.e. 70, 80 and 90℃) were applied in microwave treatment. The extruder and hot press machines were used to mixing the sugar palm fibres and polyurethane resin, and fabricate the composites. Tensile properties(i.e. tensile strength, tensile modulus and elongation at break) were studied by following the ASTM D-638 standard. The highest tensile strength was recorded 18.42 MPa with microwave temperature at 70℃ and 6% alkali pre-treatment. Therefore, the temperature 70℃ of microwave treatment may consider the best degree cent grate.

Effect of particle size on the preparation and microwave absorption properties of FeSiAl magnetically soft alloy hollow microspheres

FeSiAl magnetically soft alloy hollow microspheres(MSAHMs) were prepared by self-reactive quenching technology based on Fe + Si + AI + KNO_3 reactive systems, in order to obtain absorbents with light weight, low frequency and high efficiency. Firstly, twice-balling adhesive precursor method was used to obtain FeSiAl magnetically soft alloy agglomerate powders. Then agglomerate powders with the mesh number of 150-240, 240-325 and 325-400 were sprayed through the flame field into the quenching water. At last, FeSiAl MSAHMs with coarse(average at 86.97 μm), medium(average at 52.16 μm) and fine particles(average at 31.80 μm) were got. Effect of particle size on the phases and microwave absorption properties in low frequency band was studied by XRD and vector network analyzer. The results show that,Fe_3 Si_(0.7)Al_(0.3) and Fe_3 Si_(0.5)Al_(0.5) appear in the phase components of FeSiAl MSAHMs,which is important to improve the microwave absorption properties in low frequency. In addition, the real part(ε′) and imaginary part(ε″) of complex permittivity, the real part(μ′) and imaginary part(μ″) of complex permeability of FeSiAl MSAHMs all present the trend of fine particles > medium particles > coarse particles. The microwave absorption properties in low frequency are improved with the increasing of particle size, and the absorption peak moves to lower frequency range. The properties of fine particles are the best. Their matching thickness of samples is at 5 mm, and the minimum reflectivity is-43 dB at this thickness. The absorption frequency band lower than-10 dB is 4.6-7.6 GHz with a bandwidth of 3 GHz.

Microstructure and microwave dielectric properties of ZnO-B_2O_3 added (Ca_(0.254)Li_(0.19)Sm_(0.14))TiO_3 ceramics

The effects of ZnO-B2O3 （ZB2） on the sintering behavior and microwave dielectric properties of （Ca0.254Li0.19Sm0.14）TiO3 ceramics were investigated. The densities of the specimens reached the maximum value by adding 3 wt.% ZB2 and then decreased. The sintering temperature of the specimens was lowered from 1300 to 1100℃ without degradation of the microwave dielectric properties. The （Ca0.254Li0.19Sm0.14）TiO3＋ 3 wt.% ZB2 sintered at 1100℃ for 3 h showed good microwave dielectric properties, εr= 108.2, Qf= 6545 GHz, and rf= 6.5 ppm/℃, respectively, indicating that ZB2 was an effective sintering aid to improve the densification and microwave dielectric properties of （Ca0.254Li0.19Sm0.14）TiO3 ceramics.

Crystal microstructure, infrared absorption, and microwave electromagnetic properties of (La_(1-x)Dy_x)_(2/3)Sr_(1/3)MnO_3

The manganite perovskite polycrystal samples of （La1-xDyx）2/3Sr1/3MnO3 （x = 0, 0.1, 0.2, 0.35, and 0.5） doped with Dy were prepared by solid state reaction in atmosphere to measure their X-ray diffraction （XRD） patterns, scanning electric microscope （SEM） images, infrared absorption spectra, and microwave electromagnetic properties. The displacement of the XRD peaks of the samples was found, and the 2θ increases from 0.05o to 0.5o. The grains of undoped La2/3Sr1/3MnO3 not only have the greatest size, but also the most regular shape. The size of the grains decreases as the Dy doping content increases from 0 to 0.5. The infrared absorption spectra of all samples were measured at room temperature. An absorption peak corresponding to the stretching vibration mode of Mn-O bonds appears within the range of 591-629 cm-1. The absorption peak shifts from a higher frequency to a lower one with the decrease of the average ionic radius of A-site. The frequency de- pendence of microwave-absorbing properties, imaginary components of the complex magnetic permeability μ＂ and dielectric permeability ε＂ for all samples was measured at room temperature from 8 to 13 GHz. The results show that the loss of microwave absorption can be attrib- uted to both the magnetic and electric losses. The increase of Dy content not only enhances the microwave absorption but also causes the displacement of the absorption peaks.

Broad Microwave Dielectric Property of Single-walled Carbon Nanotube Composites

Microwave dielectric measurements over the broad bandwith of 10 MHz to 20 GHz were conducted on composites comprising bundles of single-walled carbon nanotubes （SWNT） embedded in an epoxy matrix, in comparison to the nano-graphite and MWNT. It is found that both relative real and imaginary permittivity of the nanocomposites are strong functions of the SWNT concentration, showing large, wide dielectric and electrical response. Distinct resonance around 1.5 GHz is observed at high SWNT concentrations, accompa- nied by the downshift of the resonance frequency with increasing concentration. Largely, the SWNT-epoxy composites share the behavior of the MWNT owing to structural similarity, much more effective than the nano-graphite. The remarkable, broadband dielectric and electrical properties of the nanotubes acquired in the work originate from their unique seamless graphene architectures, modeled by two major contributions, dielectric relaxation/resonance and electronic conduction, which is substantiated by the agreement between theoretical analysis and experimental results. The carbon nanotube composites are prospective for microwave applications and offer experimental evidence for fundamental studies in low-dimensional systems.

Microwave sintering effects on the microstructure and mechanical properties of Ti–51at%Ni shape memory alloys

Ti–51at%Ni shape memory alloys(SMAs) were successfully produced via a powder metallurgy and microwave sintering technique.The influence of sintering parameters on porosity reduction,microstructure,phase transformation temperatures,and mechanical properties were investigated by optical microscopy,field-emission scanning electron microscopy(FE-SEM),X-ray diffraction(XRD),differential scanning calorimetry(DSC),compression tests,and microhardness tests.Varying the microwave temperature and holding time was found to strongly affect the density of porosity,presence of precipitates,transformation temperatures,and mechanical properties.The lowest density and smallest pore size were observed in the Ti–51at%Ni samples sintered at 900°C for 5 min or at 900°C for 30 min.The predominant martensite phases of β2 and β19′ were observed in the microstructure of Ti–51at%Ni,and their existence varied in accordance with the sintering temperature and the holding time.In the DSC thermograms,multi-transformation peaks were observed during heating,whereas a single peak was observed during cooling;these peaks correspond to the presence of the β2,R,and β19′ phases.The maximum strength and strain among the Ti–51at%Ni SMAs were 1376 MPa and 29%,respectively,for the sample sintered at 900°C for 30 min because of this sample's minimal porosity.

Effect of Rare Earth Element on Microwave Absorption Properties of Nano-Lithium Ferrite

Superfine powders of nano-lithium ferrite doped with different kinds and amount of rare earth element were prepared by sol-gel method. Their photograph was taken by transmission electron microscopy. From it, we can see most of particles are less than 100 nm and average diameter of superfine powders is 50 nm. Then their microwave absorption properties are measured by power ratio method. The result indicates that microwave absorption properties of nano-lithium ferrite doped with rare earth element change obviously. Different kinds and amount of rare earth element make different influences. Magnetic hysteresis loop is surveyed by vibrating sample magnetometer. We find that there are some relationships between magnetism and microwave absorption properties.

Dielectric and Microwave Properties of Natural Rubber Based Nanocomposites Containing Graphene

The development of carbon nanotubes based materials has been impeded by both their difficult dispersion in the polymer matrix and their high cost. The discovery of graphene and the subsequent development of graphene-based polymer nanocomposites is an important addition in the area of nanoscience and technology. In this study the influence of graphene nanoparticles (GNP) in concentrations from 2.0 to 10.0 phr on the dielectric (dielectric permittivity, dielectric loss angle tangent) and microwave (reflection coefficient, attenuation coefficient, shielding effectiveness) properties of nanocomposites on the basis of natural rubber has been investigated in the wide frequency range (1 - 12 GHz). The results achieved allow recommending graphene as a filler for natural rubber based composites to afford specific dielectric and microwave properties, especially when their loading with the much more expensive carbon nanotubes is not possible.

Analysis of Reflection Properties of High Power Microwave Propagation in Mixture-Atmosphere

A simple theoretical modeling is made to describe the reflection features of the high power microwave (HPM) in the mixture-atmosphere. The time-space dependent mixture-atmosphere is generated by ionization of the neutral molecules in atmosphere. Reflection will occur when HPM propagates in such mixture-atmosphere. The reflection characteristic of the HPM propagation in the mixture-atmosphere is investigated by FDTD numerical experiments in inhomogeneous medium, the influence on the reflection for different HPM parameters is concluded. An additional stability conditions for the FDTD difference scheme of the HPM mixture-atmosphere propagation model are presented.

Mossbauer spectroscopy studies on the particle size distribution effect of Fe–B–P amorphous alloy on the microwave absorption properties

An Fe-based nanocrystalline alloy powder is important for application in microwave absorption,and the particle size has a critical impact on the electromagnetic microwave parameters.Therefore,it is necessary to study further the effects of the particle size on such parameters and improve the microwave absorption performance of Febased nanocrystalline powers.In this study,Fe-B-P particles were prepared through a synthetic approach consisting of an aqueous chemical reduction and a ball milling treatment.We investigated the effects of ball milling on the microstructure and electromagnetic properties of Fe-B-P particles.The experimental results indicate that the Fe-B-P particles synthesized through an aqueous chemical reduction are amorphous spheres.Fe-B-P particles with an original particle size of 200-1200 nm can be milled into an irregular shape with the size reduced to\500 nm after 0.5 h of ball milling,and subsequently,the particles become smaller with increases in the milling time,with traces of Fe2O3 generated on the particle surface.The results of the Mo¨ssbauer spectra show that a portion of the small particles demonstrate a superparamagnetic property.The volume proportions of the superparamagnetic component increase from 13.1 to 15.8%as the treatment time increases.We measured the permittivity and permeability spectra of Fe-B-P particles within the frequency range of 2-18 GHz.The reflection loss(RL)is-10 dB for an absorber thickness of 1.7-5.0 mm.The RL is-20 dB for an absorber thickness of 1.9-2.7 mm.The microwave absorption properties of samples with the same thickness are improved with an increase in the treatment time and are shifted to a higher frequency,which will broaden the bandwidth of the absorption as well.

Effect of industrial microwave irradiation on the physicochemical properties and pyrolysis characteristics of lignite

The surface functional groups and pyrolysis characteristics of lignite irradiated by microwave were comparatively studied to evaluate the feasibility of using industrial 915 MHz for lignite drying. The drying kinetics, micro structure, chemical functional groups, re-adsorption properties, and pyrolysis characteristics of the dried coal were respectively analyzed. Results indicated that for typical Chinese lignite studied in this paper, 915 MHz microwave drying was 7.8 times faster than that of the hot air drying. After industrial microwave drying, the sample possessed much higher total specific surface area and specific pore volume than that of air dried sample. The oxygen functional groups and re-adsorption ratio of microwave irradiated coal decreased, showing weakened hydrophilicity. Moreover, during the pyrolysis of the coal dried by hot air and microwave, the yield of tar largely increased from 1.3% to 8.5% and the gas production increased correspondingly. The composition of the tar was also furtherly analyzed, results indicated that Miscellaneous hydrocarbons(HCs) were the main component of the tar, and microwave irradiation can reduce the fraction of polycyclic aromatic hydrocarbons(PAHs) from 26.4% to 22.7%.

Synthesis of flowerlike nickel particles and their microwave absorbing properties

Two kinds of nickel particles with flower-like structures assembled with a number of nano-flakes were synthesized and the relationship of their morphology and microwave absorbing properties was studied.The electromagnetic parameters of these flower-like Ni were measured with vector network analyzer at 2-18 GHz frequency and the reflection losses(RL) with different sample thicknesses were calculated.The results indicate that the flower-like nickel-wax composites with the sample thickness less than 2 mm show excellent absorbing ability.This result is expected to play a guiding role in the preparation of the highly efficient absorber.