A new device of two parallel distributed feedback (DFB) lasers integrated monolithically with Y-branch waveguide coupler was fabricated by means of quantum well intermixing. Optical microwave signal was generated in...A new device of two parallel distributed feedback (DFB) lasers integrated monolithically with Y-branch waveguide coupler was fabricated by means of quantum well intermixing. Optical microwave signal was generated in the Y-branch waveguide coupler through frequency beating of the two laser modes coming from two DFB laser in parallel, which had a small difference in frequency. Continuous rapid tuning of optical microwave signal from 13 to 42 GHz were realized by adjusting independently the driving currents injected into the two DFB lasers.展开更多
Radio frequency/microwave-directed energy sources using wide bandgap SiC photoconductive semiconductors have attracted much attention due to their unique advantages of high-power output and multi-parameter adjustable ...Radio frequency/microwave-directed energy sources using wide bandgap SiC photoconductive semiconductors have attracted much attention due to their unique advantages of high-power output and multi-parameter adjustable ability.Over the past several years,benefitting from the sustainable innovations in laser technology and the significant progress in materials technology,megawatt-class output power electrical pulses with a flexible frequency in the P and L microwave wavebands have been achieved by photoconductive semiconductor devices.Here,we mainly summarize and review the recent progress of the high-power photonic microwave generation based on the SiC photoconductive semiconductor devices in the linear modulation mode,including the mechanism,system architecture,critical technology,and experimental demonstration of the proposed high-power photonic microwave sources.The outlooks and challenges for the future of multi-channel power synthesis development of higher power photonic microwave using wide bandgap photoconductors are also discussed.展开更多
We demonstrate the ultra-stable frequency sources aiming to improve the short-time instability of primary frequency standards.These sources are realized by using photonic generation approach,and composed of ultra-stab...We demonstrate the ultra-stable frequency sources aiming to improve the short-time instability of primary frequency standards.These sources are realized by using photonic generation approach,and composed of ultra-stable lasers,optical-frequency-combs,optical signal detecting parts,and synthesizers.Preliminary evaluation shows that the sources produce fixed-frequency at 9.54(/9.63)GHz,10 MHz,and tunable-frequency around 9.192 GHz with relative frequency instability of 10^(-15) for short terms.展开更多
We demonstrate an all-fiber-based photonic microwave generation with 10^(-15) frequency instability.The system consists of an ultra-stable laser by optical fiber delay line,an all-fiber-based"figure-of-nine"...We demonstrate an all-fiber-based photonic microwave generation with 10^(-15) frequency instability.The system consists of an ultra-stable laser by optical fiber delay line,an all-fiber-based"figure-of-nine"optical frequency comb,a high signal-tonoise ratio photonic detection unit,and a microwave frequency synthesizer.The whole optical links are made from optical fiber and optical fiber components,which renders the whole system compactness,reliability,and robustness with respect to environmental influences.Frequency instabilities of 3.5×10^(-15) at 100 s for 6.834 GHz signal and 4.3×10^(-15) at 100 s for9.192 GHz signal were achieved.展开更多
Optical beating is the usual approach to generation of microwave signals.However,the highest frequency achievable for microwave signals is limited by the bandwidths of optoelectronic devices.To maximize the microwave ...Optical beating is the usual approach to generation of microwave signals.However,the highest frequency achievable for microwave signals is limited by the bandwidths of optoelectronic devices.To maximize the microwave frequency with a limited bandwidth of a photodetector(PD)and relieve the bandwidth bottleneck,we propose to generate microwave signals with the single sideband(SSB)format by beating a continuous wave(CW)light with an optical SSB signal.By simply adjusting the frequency diference between the CW light and the carrier of the optical SSB signal,the frequency of the generated microwave SSB signal is changed correspondingly.In the experiment,amplitude shift keying(ASK)microwave signals with the SSB format are successfully generated with diferent carrier frequencies and coding bit rates,and the recovered coding information agrees well with the original pseudo random binary sequence(PRBS)of 2^(7)−1 bits.The proposed approach can signifcantly relieve the bandwidth restriction set by optoelectronic devices in high-speed microwave communication systems.展开更多
An approach to generate high-speed and wideband frequency shift keying(FSK)signals based on carrier phase-shifted double sideband(CPS-DSB)modulation is proposed and experimentally validated.The core part of the scheme...An approach to generate high-speed and wideband frequency shift keying(FSK)signals based on carrier phase-shifted double sideband(CPS-DSB)modulation is proposed and experimentally validated.The core part of the scheme is a pair of cascaded polarization-sensitive LiNbO_(3) Mach–Zehnder modulators and phase modulators,whose polarization directions of the principal axes are mutually orthogonal to each other.A proof-of-concept experiment is carried out,where a 0.5 Gb/s FSK signal with the carrier frequencies of 4 and 8 GHz and a 1 Gb/s FSK signal with the carrier frequencies of 8 and 16 GHz are generated successfully.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No 90401025). Acknowledgments The authors are grateful to the Multiple-function 0ptoelectronic Integration group, Institute of Semiconductors, CAS for sponsoring this project. We extend our thanks to Professor Wang Zi-Yu of Peking University for microwave signal testing.
文摘A new device of two parallel distributed feedback (DFB) lasers integrated monolithically with Y-branch waveguide coupler was fabricated by means of quantum well intermixing. Optical microwave signal was generated in the Y-branch waveguide coupler through frequency beating of the two laser modes coming from two DFB laser in parallel, which had a small difference in frequency. Continuous rapid tuning of optical microwave signal from 13 to 42 GHz were realized by adjusting independently the driving currents injected into the two DFB lasers.
基金supported in part by the National Natural Science Foundation of China(Nos.62071477 and 62101577)the Natural Science Foundation of Hunan Province(No.2021JJ40660)。
文摘Radio frequency/microwave-directed energy sources using wide bandgap SiC photoconductive semiconductors have attracted much attention due to their unique advantages of high-power output and multi-parameter adjustable ability.Over the past several years,benefitting from the sustainable innovations in laser technology and the significant progress in materials technology,megawatt-class output power electrical pulses with a flexible frequency in the P and L microwave wavebands have been achieved by photoconductive semiconductor devices.Here,we mainly summarize and review the recent progress of the high-power photonic microwave generation based on the SiC photoconductive semiconductor devices in the linear modulation mode,including the mechanism,system architecture,critical technology,and experimental demonstration of the proposed high-power photonic microwave sources.The outlooks and challenges for the future of multi-channel power synthesis development of higher power photonic microwave using wide bandgap photoconductors are also discussed.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.91536217,61127901,and 11775253)the Youth Innovation Promotion Association of the Chinese Academy of Sciences(Grant No.2015334)The authors would like to thank special funds for scientific equipment development(YZ201518)from Chinese academy of sciences for the use of the developed equipment
文摘We demonstrate the ultra-stable frequency sources aiming to improve the short-time instability of primary frequency standards.These sources are realized by using photonic generation approach,and composed of ultra-stable lasers,optical-frequency-combs,optical signal detecting parts,and synthesizers.Preliminary evaluation shows that the sources produce fixed-frequency at 9.54(/9.63)GHz,10 MHz,and tunable-frequency around 9.192 GHz with relative frequency instability of 10^(-15) for short terms.
基金This work was supported by the National Natural Science Foundation of China(Nos.11034008,11274324,11604353,and 61805262)。
文摘We demonstrate an all-fiber-based photonic microwave generation with 10^(-15) frequency instability.The system consists of an ultra-stable laser by optical fiber delay line,an all-fiber-based"figure-of-nine"optical frequency comb,a high signal-tonoise ratio photonic detection unit,and a microwave frequency synthesizer.The whole optical links are made from optical fiber and optical fiber components,which renders the whole system compactness,reliability,and robustness with respect to environmental influences.Frequency instabilities of 3.5×10^(-15) at 100 s for 6.834 GHz signal and 4.3×10^(-15) at 100 s for9.192 GHz signal were achieved.
基金the National Natural Science Foundation of China(Grant No.61975249)the National Key Research and Development Program of China(Nos.2018YFB2201700 and 2018YFA0704403)the Program for HUST Academic Frontier Youth Team(No.2018QYTD08).
文摘Optical beating is the usual approach to generation of microwave signals.However,the highest frequency achievable for microwave signals is limited by the bandwidths of optoelectronic devices.To maximize the microwave frequency with a limited bandwidth of a photodetector(PD)and relieve the bandwidth bottleneck,we propose to generate microwave signals with the single sideband(SSB)format by beating a continuous wave(CW)light with an optical SSB signal.By simply adjusting the frequency diference between the CW light and the carrier of the optical SSB signal,the frequency of the generated microwave SSB signal is changed correspondingly.In the experiment,amplitude shift keying(ASK)microwave signals with the SSB format are successfully generated with diferent carrier frequencies and coding bit rates,and the recovered coding information agrees well with the original pseudo random binary sequence(PRBS)of 2^(7)−1 bits.The proposed approach can signifcantly relieve the bandwidth restriction set by optoelectronic devices in high-speed microwave communication systems.
基金supported by the National Natural Science Foundation of China(Nos.U2006217,61775015,61801017,and 61827818)。
文摘An approach to generate high-speed and wideband frequency shift keying(FSK)signals based on carrier phase-shifted double sideband(CPS-DSB)modulation is proposed and experimentally validated.The core part of the scheme is a pair of cascaded polarization-sensitive LiNbO_(3) Mach–Zehnder modulators and phase modulators,whose polarization directions of the principal axes are mutually orthogonal to each other.A proof-of-concept experiment is carried out,where a 0.5 Gb/s FSK signal with the carrier frequencies of 4 and 8 GHz and a 1 Gb/s FSK signal with the carrier frequencies of 8 and 16 GHz are generated successfully.