Profiling the effects of microwave-assisted and soxhlet extraction techniques on the physicochemical attributes of Moringa oleifera seed oil and proteins

There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet extraction(MAE and SE) techniques on the functional physicochemical quality characteristics of Moringa oleifera seed oil and proteins extracts. M. oleifera seeds were ground to fine powders and oil was extracted by microwave-assisted and soxhlet extraction techniques using petroleum ether. Quality attributes including yield percent, moisture content,iodine, saponification, specific gravity, viscosity, p H, thiobarbituric acid, acid and peroxide values were measured. Mineral and vitamin contents, chemical/functional groups, fatty acid(FA) composition, and reducing power of the oil were evaluated. Metabolomics of protein extracted from the defatted powders were analyzed by nuclear magnetic resonance(NMR). M. oleifera oil from MAE and SE methods had good yield(34.25 ± 0.0%,28.75 ± 0.0%), low moisture content(0.008 ± 0.0%, 0.011 ± 0.0%), non-drying and unsaturated, moderately saponified, less dense(0.91 ± 0.01, 0.92 ± 0.02 g m L^(-1)), had Newtonian flow, were weakly acidic, showed good content of FAs, recorded strong potential for long shelf-life, showed stability against oxidative rancidity and enzymatic hydrolysis, had very rich deposits of micro-and macro-nutrients as well as water-soluble and lipidsoluble vitamins, and functional groups in the oil were reflective of its content of long-and medium-chain triglycerides(LCT and MCT). Monounsaturated and saturated fatty acids(MUFA and SFA) were detected and the oil has excellent ferric ion reducing power. NMR metabolomic assay revealed the presence of nine essential amino acids(EAAs) in the protein extract. MAE technique is a feasible and acceptable alternative for high throughput extraction of M. oleifera oil with high yield and excellent quality attributes. The study revealed that MAE did not impart any remarkable advantage(s) on the physicochemical properties of M. oleifera seed oil and protein compared to SE technique.

MICROWAVE-ASSISTED EXTRACTION OF GLYCYRRHIZIC ACID FROM LICORICE ROOT-EFFECT OF THE PROPERTY OF SOLUTION ON EXTRACTION OF GA

The property of extraction solution is an important factor influencing the extraction efficiency. In the present work, the effect of the property of solution on extraction of GA was studied, which including the concentration of ethanol, ammonia and cation (M+), pH of extraction solution, different kinds of organic solvent etc. The results show that 50%-60%(v/v) ethanol can reach high percentage extraction of GA. If 1% (v/v) ammonia solution was added into 60%(v/v) ethanol, the percentage extraction can be increased from 2.0% to 2.31%. Without ammonia, 50mmol/L [M+] (M+ = K+, NH4+) was added into 60%(v/v) ethanol, percentage extraction of GA can reach about 2.26%. If pH of solution (60% ethanol) was adjust to pH=4.0, it can reach high percentage extraction. If pH of solution (60% ethanol + 50mmol [M+], pH=6.1) was adjust tO PH=4.0, especially M+ is K+ or NH4+, it can reach almost same extraction efficiency as that of 1% ammonia solution + 60% ethanol, and the operation environment can be greatly improved.

Microwave-assisted Extraction of Rutin and Quercetin from Flos Sophorae

Three microwave-assisted extraction(MAE) procedures were studied. The first procedure was household microwave oven dynamic extraction(HMODE). The second procedure was special microwave oven bath extraction(SMOBE). The third procedure was microwave resonant cavity dynamic extraction(MRCDE). The results obtained by the three microwave-assisted extraction procedures were compared with those obtained by using traditional Soxhlet extraction. The results indicate that the MAE not only took a shorter time, but also simplified the procedure, and made the extraction a higher yield. At the same time the results obtained by the three MAE procedures were also compared with each other.

Response surface optimization of microwave-assisted extraction for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii

Microwave-assisted extraction was optimized with response surface methodology for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii.The optimized extraction procedure was achieved by soaking the sample with 70% methanol（1∶15,v/v）for 30 min,and then microwave irradiation for 11 min at a power of 600 W.Coupling the extraction process with HPLC-fluorescence presented good recovery,satisfactory precision,and good linear relation.Compared with a method from the Chinese Pharmacopoeia,the proposed method enables higher extraction efficiency and more accurate analytical results.It can be of potential value in quality assessment of Radix Puerariae thomsonii medicinal materials.

Microwave-assisted solvent extraction of castor oil from castor seeds

This study was aimed at evaluating the physicochemical properties and oxidation stability of castor oil using microwave-assisted solvent extraction(MAE). MAE was performed using 5% ethanol in hexane as solvent at different extraction times, power intensities and solvent-to-feed(S/F, ml of solvent to gram of feed) ratios.The process parameters were optimized by statistical approach using historical data design of response surface method(RSM). The oils were characterized for yield, physicochemical properties, dielectric properties and oxidation stability, and comparison was also made with oil extracted using Soxhlet method. Results show that the maximum oil yield of 37% was obtained at 20 min with microwave power intensity of 330 W and S/F ratio of 20. The main fatty acid composition of castor oil is ricinoleic acid. The density, refractive index, dielectric properties and oxidation stability of oils are not affected by the extraction methods and extraction parameters of MAE. However, the MAE-extracted oil is more viscous compared to that by Soxhlet method. With extra caution on oil oxidation, MAE could be a promising solvent extraction method with an 86% less in processing time and a higher yield.

Optimization of microwave-assisted extraction of bioactive alkaloids from lotus plumule using response surface methodology

In this work,a fast and efficient microwave-assisted extraction(MAE) method was developed to extract main bioactive alkaloids from lotus plumue.To optimize MAE conditions,three main factors were selected using univariate approach experiments,and then central composite design(CCD).The optimal extraction conditions were as follows:methanol concentration of 65%,microwave power of 200 W,and extraction time of 260 s.A high performance liquid chromatography–diode array detector(HPLC–DAD) method was established to quantitatively analyze these phytochemicals in different lotus plumule samples and in different part of lotus.Chromatographic separation was carried out on an Agilent Zorbax Extend-C_(18) column(4.6 mm×150 mm,3.5 μm).Gradient elution was applied with the mobile phase constituted with 0.1% triethylamine in water(A)and acetonitrile(B):40%-70% B at 0-8 min,70%-100% B at 8–9 min,100% B for 2 min,and then equilibrated with 40% B for 2 min.

Dynamic microwave-assisted extraction combined with liquid phase microextraction based on the solidification of a floating drop for the analysis of organochlorine pesticides in grains followed by GC

A convenient,cost-effective and fast method using dynamic microwave-assisted extraction and liquid phase microextraction based on the solidification of a floating drop was proposed to analyze organochlorine pesticides in grains including rice,maize and millet.Twelve samples can be processed simultaneously in the method.During the extraction process,10%acetonitrile-water solutions containing 110μL of n-hexadecane were used to extract organochlorine pesticides.Subsequently,1.0 g sodium chloride was placed in the extract,and then centrifuged and cooled.The n-hexadecane drops containing the analytes were solidifi ed and transferred for determination by gas chromatography-electron capture detector without any further filtration or cleaning process.Limits of detection for organochlorine pesticides were 0.97–1.01μg/kg and the RSDs were in the range of 2.6%–8.5%.The developed technology has succeeded in analyzing six real grains samples and the recoveries of the organochlorine pesticides were 72.2%–94.3%.Compared with the published extraction methods,the developed method was used to analyze organochlorine pesticides in grains,being more environmentally friendly,which is suitable for the daily determination of organochlorine pesticides.

Comparison of Response Surface Methodology and Artificial Neural Network in Predicting the Microwave-Assisted Extraction Procedure to Determine Zinc in Fish Muscles

In this paper, the estimation capacities of the response surface methodology (RSM) and artificial neural network (ANN), in a microwave-assisted extraction method to determine the amount of zinc in fish samples were investigated. The experiments were carried out based on a 3-level, 4-variable Box–Behnken design. The amount of zinc was considered as a function of four independent variables, namely irradiation power, irradiation time, nitric acid concentration, and temperature. The RSM results showed the quadratic polynomial model can be used to describe the relationship between the various factors and the response. Using the ANN analysis, the optimal configuration of the ANN model was found to be 4-10-1. After predicting the model using RSM and ANN, two methodologies were then compared for their predictive capabilities. The results showed that the ANN model is much more accurate in prediction as compared to the RSM.

Application and research advancement on the microwave-assisted extraction

This paper summarized application and research advancement of the microwave-assisted extraction in the agriculture, food industry, environmental analytical chemistry, traditional Chinese medicine industry, and so on. The microwave-assisted extraction was manifested to be a simple device, wide area of application, high extraction efficiency, good reproducibility and low consumption of agent and time as well as low environmental pollution. At present, industrialization question of the microwave-assisted extraction technology has been attached importance, which will impel the microwave-assisted extraction technology to more development in the future

Study on chromatographic fingerprint of sarcandra glabra (Thunb.) by microwave-assisted extraction coupled to HPLC/DAD

Microwave-assisted extraction(MAE)was used for extraction of effective components of sarcandra glabra(Thunb.),and then chromatographic fingerprint of sarcandra glabra(Thunb.)was studied by high performance liquid chromatography/diode array detector(HPLC/DAD).The conditions of MAE were optimized by an orthogonal experiment,and then the authentication and validation of the chromatographic fingerprint were conducted.Nine peaks were identified as common peaks in the fingerprint chromatograms,and isofraxidin was considered as a reference compound and quantified.Relative standard deviations of retention time and peak area of each component were less than 3% and 8%,respectively.Similarity and difference analysis were conducted by use of PCA and relation coefficient.Twenty batches of sarcandra glabra(Thunb.)samples from two different producing areas could be classified into two different groups in the PCA model.The results showed that MAE-HPLC/DAD method was simple,efficient and stable for the study of complex chromatographic fingerprint of sarcandra glabra(Thunb.),which could provide more reliable and precise information for quality evaluation.

A Study on Continuous Extraction of Cadmium by Using Liquid Surfactant Membrane

ＡＳｔｕｄｙｏｎＣｏｎｔｉｎｕｏｕｓＥｘｔｒａｃｔｉｏｎｏｆＣａｄｍｉｕｍｂｙＵｓｉｎｇＬｉｑｕｉｄＳｕｒｆａｃｔａｎｔＭｅｍｂｒａｎｅ￥（孙德智）（周定）ＳＵＮＤｅｚｈｉ；ＺＨＯＵＤｉｎｇ（Ｄｅｐｔ．ＡｐｐｌｉｅｄＣｈｅｍｉｓｔｒｙ，ＨａｒｂｉｎＩ...

THE BIDIMENSIONAL EVOLUTIONARYBOUSSINESQ-STEFAN PROBLEM WITH CONTINUOUS EXTRACTION

In this paper we consider an evolutionary continuous casting problem with convection partial derivative + b(y) chi - Delta kappa(u) + (v) over right arrow .del u = 0 coupled with Stokes equation in the liquid phase partial derivative(t) (v) over right arrow - v Delta (v) over right arrow + del p = (f) over right arrow(u) The mixed boundary condition is put on temprature. The existence of a weak solution is obtained by using methods of regularization, temperature dependent penalty form in the Stokes equation and compact arguments.

Measurement of Mass Transfer Coefficients and Their Modelling of Continuous Counter-Current Aqueous Two-Phase System in a Packed Extraction Column

Overall dispersed side volumetric mare transfer coeffcieats for protein and amino acids were measured in continuous countercurreat PEG4000/KHP aqueous two-phase systems in a 57 mm I.D. packed extraction column. A model for overall dispersed side volumetric mass transfer coefficients was derived by describing the motion of the drops based upon Navier-Stokes equation combined with the relationship between mass transfer coefficients and the drop velocity. The model provides good predictions and can be successfully used in aqueous two-phase extraction. The awrage relative deviation between calculated values and experimental date ranges from 8% to 14%.

Sinomenine Purification by Continuous Liquid-Liquid Extraction Process with Centrifugal Extractors

Continuous manufacturing is considered as one of the future trends of pharmaceutical engineering. In this work, continuous liquid-liquid extraction for sinomenine purification was realized with the usage of centrifugal extractors. Chloroform was used as the extractant because of the high distribution coefficient (>100). Higher extraction ratio can be obtained when using the centrifugal extractor of Model CWL50-N. The extraction ratio of the second-stage extraction was higher than that of the first-stage extraction. The extraction ratio of the second-stage countercurrent extraction was higher than that of second-stage cross-flow extraction. When chloroform phase was recycled for liquid-liquid extraction, the extraction ratio was also higher than 95%. This work can also be an example of continuous liquid-liquid extraction for the separation of other Chinese medicine components.

Rapid and Continuous Extraction of Methyl Red from Wastewater Using Counter Current Chromatography

A new prototype and simple low speed counter current chromatography (LSCCC) has been fabricated and a laboratory work has been carried out for rapid and continuous removal of methyl red from wastewater using xylene as an extractant. The distribution ratio (D) and percentage of recoveries were calculated. The optimum concentration for extraction of methyl red was in the range of 2 × 10-4 to 8 × 10-4 mol·L-1. Maximum extraction achieved at pH range of 2 to 4.5. Various dye concentrations and solvent effects were studied to optimized conditions. It was shown that when the ratio of the organic phase to aqueous phase increased to more than 3:1, the striping efficiency decreased sharply. The experiments were carried out for 5 times and the highest extraction achieved was 99.8 per cent by two-solvent system LSCCC in just 5 minutes. Real wastewater samples were analyzed and the efficiency of the technique was compared with liquid-liquid extraction (LLE). In practice it was shown that although both techniques are rapid, the efficiency of the LSCCC is much better than LLE.

Study on Extraction of Pectin from Orange Peels

The comparison was conducted to investigate the higher extraction rate between two methods including alcohol deposition with acid hydrolysis and micro- wave-assistant extraction technique. The experimental results showed that the former method led to a better extraction effect. For the method of alcohol deposition with acid hydrolysis, the technique parameters were optimized through I.s （34 ） orthogonal e^periment based on the results of single factor experiments, after investi- gated the effect of solid to liquid ratio, pH, extraction temperature and extraction time on the pectin extraction rate. tersrm technique was employed to extract pectin. The selected parameter was obtained by means On the basis of the optimal technical parmne- of L16 （45） orthogonal experiment after studied the effect of solid to liquid ratio, extraction temperature, microwave treatment period, pH and microwave power on pectin extraction yield. Repetitive examinations of two methods were carried out separately, pectin extraction rate with the fLrst technique was 14.57% and that with the second method was 11.62%. The charac- teristics of the pectin sample prepared by alcohol deposition with acid hydrolysis were further investigated. The research demonstrated that mass percent of pectin was 87.23%. The esterification degree of pectin was 75.66% ,and pectin sample color was from creamy white to pale yellow.

Review of minimally invasive continuous glucose monitoring technology & instruments

Continuous blood glucose monitoring is important for the diagnosis,treatment,and study of diabetes. many organizations have been working on this subject in recent two decades. Glucose concentration in interstitial fluid is closely related to the blood glucose levels. Minimally invasive continuous blood glucose monitoring technology based on the glucose detection in interstitial fluid develops rapidly and gets more and more attentions from the patients and the doctors,due to its instantaneous real-time display of glucose level,"24/7"coverage,and the ability to characterize glycemic variability. According to the different detection methods,most of the continuous glucose monitoring technology could be divided into two kinds: subcutaneous implantation method and transdermal extraction method. This paper review s the recent development of minimally invasive blood glucose monitoring technology and instruments. The mainly remained challenges and related research directions are presented as well.

Screening and Verification of Genes Specifically Responding to Continuous Cropping Obstacle in Rehmannia glutinosa L.

Rehmannia glutinosa L.is one of the important medicinal crops in China.Continuous cropping obstacle severely restricts the yield and quality of R.glutinosa,but its molecular mechanism is still unclear.In this study,with widely-planted "Wen 85-5" as an experiment material,based on the digital gene expression profiling (DGE) data of previous five stress treatments (continuous cropping,phenolic acid,salt,drought and waterlogging) and the first cropping and continuous cropping treatments of R.glutinosa in five different periods (seedling period,elongation period,early expanding period,middle expanding period and later expanding period),80 candidate genes (|log 2 ratio|≥1,FDR <0.001) specifically responding to continuous cropping obstacle in R.glutinosa were screened.Functional analysis revealed that the differentially expressed genes were involved in the secretion and endocytosis of root cells,which may suggest that the recognition and absorption of allelopathic autotoxins by the roots of R.glutinosa is an important factor that restricts the development of roots in continuous cropping of R.glutinosa.In order to accurately lock genes specifically responding to continuous cropping obstacle in R.glutinosa,continuous cropping soil extract and ferulic acid and p-hydroxybenzonic acid were used to treat aseptic plantlets of R.glutinosa,respectively,and it was confirmed through qRT-PCR that the expression levels of some genes under phenolic acid treatment changed more severely than that under the continuous cropping soil extract treatment,and four key genes involved in the response of R.glutinosa to continuous cropping were finally locked.This study lays a foundation for further exploration of the molecular mechanism of continuous cropping obstacle.

Parameters of Exterior Ballistic Feature Points Extraction in Radar Measurement Data by EMD

The problem of measuring exterior ballistic feature points is always difficult to solve and it is essentiale on exterior ballistic measurement.By analysis of radar reflection characteristics and non-stationary echo signals of exterior ballistic feature points,the echo data of exterior ballistic feature points is measured by using the continuous wave radar.The parameters of feature points are extracted by the empirical mode decomposition method(EMD)of Hilbert-Huang transform(HHT)spectrum analysis technique.The radar echo signal model and EMD extraction model are established to analyze the exterior ballistic mutation point detection and EMD extraction method of aliasing echo signal.Typical feature point parameters of exterior ballistic in rocket flight tests are carried out and the effectiveness of the method is verified.A new method of measuring the parameters of exterior ballistic feature point is therefore presented.

Studies on Extraction Process of Polysaccharides from Saccharomyces cerevisiae

In this study, with Saccharomyces cerevisiae as the experimental material, microwave-assisted technology, phenol-sulfuric acid method and UV spectro- photometry were employed to investigate the extraction rate of polysaccharides. Solid-liquid ratio, microwave power and microwave processing time were adopted as single factors to optimize the extraction conditions. Subsequently, orthogonal experiment was performed to investigate the optimal extraction process of polysaccha- rides from S. cerevisiae. The optimal extraction conditions were： solid-liquid ratio 1 ： 20, microwave power 250 W, microwave processing time 3 min, under which the extraction rate of polysaccharides reached 4.98%. Compared with conventional hot water extraction method, microwave-assisted extraction technology exhibited shorter extraction time, higher efficiency, and could save more energy.