Rapid Detection of Accelerants in Fire Debris Using a Field Portable Mid-Infrared Quantum Cascade Laser Based Analyzer

Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This study has investigated the application and method development of vapor phase mid-Infrared (mid-IR) spectroscopy using a field portable quantum cascade laser (QCL) based system for the detection and identification of accelerant residues such as gasoline, diesel, and ethanol in fire debris. A searchable spectral library of various ignitable fluids and fuel components measured in the vapor phase was constructed that allowed for real-time identification of accelerants present in samples using software developed in-house. Measurement of vapors collected from paper material that had been doused with an accelerant followed by controlled burning and then extinguished with water showed that positive identification could be achieved for gasoline, diesel, and ethanol. This vapor phase mid-IR QCL method is rapid, easy to use, and has the sensitivity and discrimination capability that make it well suited for non-destructive crime scene sample analysis. Sampling and measurement can be performed in minutes with this 7.5 kg instrument. This vibrational spectroscopic method required no time-consuming sample pretreatment or complicated solvent extraction procedure. The results of this initial feasibility study demonstrate that this portable fire debris analyzer would greatly benefit arson investigators performing analysis on-site.

Phase-locked single-mode terahertz quantum cascade lasers array

We demonstrated a scheme of phase-locked terahertz quantum cascade lasers(THz QCLs)array,with a single-mode pulse power of 108 mW at 13 K.The device utilizes a Talbot cavity to achieve phase locking among five ridge lasers with first-order buried distributed feedback(DFB)grating,resulting in nearly five times amplification of the single-mode power.Due to the optimum length of Talbot cavity depends on wavelength,the combination of Talbot cavity with the DFB grating leads to better power amplification than the combination with multimode Fabry-Perot(F-P)cavities.The Talbot cavity facet reflects light back to the ridge array direction and achieves self-imaging in the array,enabling phase-locked operation of ridges.We set the spacing between adjacent elements to be 220μm,much larger than the free-space wavelength,ensuring the operation of the fundamental supermode throughout the laser's dynamic range and obtaining a high-brightness far-field distribution.This scheme provides a new approach for enhancing the single-mode power of THz QCLs.

Optical facet coatings for high-performance LWIR quantum cascade lasers atλ∼8.5μm

We report on the performance improvement of long-wave infrared quantum cascade lasers(LWIR QCLs)by studying and optimizing the anti-reflection(AR)optical facet coating.Compared to the Al2O3 AR coat⁃ing,the Y_(2)O_(3)AR coating exhibits higher catastrophic optical mirror damage(COMD)level,and the optical facet coatings of both material systems have no beam steering effect.A 3-mm-long,9.5-μm-wide buried-heterostruc⁃ture(BH)LWIR QCL ofλ~8.5μm with Y_(2)O_(3)metallic high-reflection(HR)and AR of~0.2%reflectivity coating demonstrates a maximum pulsed peak power of 2.19 W at 298 K,which is 149%higher than that of the uncoated device.For continuous-wave(CW)operation,by optimizing the reflectivity of the Y_(2)O_(3)AR coating,the maximum output power reaches 0.73 W,which is 91%higher than that of the uncoated device.

Periodic and chaotic oscillations in mutual-coupled mid-infrared quantum cascade lasers

Dynamic states in mutual-coupled mid-infrared quantum cascade lasers(QCLs) were numerically investigated in the parameter space of injection strength and detuning frequency based on the Lang-Kobayashi equations model. Three types of period-one states were found, with different periods of injection time delay τ_(inj), 2τ_(inj), and reciprocal of the detuning frequency. Besides, square-wave, quasi-period, pulse-burst and chaotic oscillations were also observed. It is concluded that external-cavity periodic dynamics and optical modes beating are the mainly periodic dynamics. The interaction of the two periodic dynamics and the high-frequency dynamics stimulated by strong injection induces the dynamic states evolution.This work helps to understand the dynamic behaviors in QCLs and shows a new way to mid-infrared wide-band chaotic laser.

Anti-symmetric sampled grating quantum cascade laser for mode selection

For mode selection in a quantum cascade laser(QCL),we demonstrate an anti-symmetric sampled grating(ASG).The wavelength of the-1-th mode of this laser has been blue-shifted more than 75 nm(~10 cm^(-1))compared with that of an ordinary sampled grating laser with an emission wavelength of approximately 8.6μm,when the periodicities within both the base grating and the sample grating are kept constant.Under this condition,an improvement in the continuous tuning capability of the QCL array is ensured.The ASG structure is fabricated in holographic exposure and optical photolithography,thereby enhancing its flexibility,repeatability,and cost-effectiveness.The wavelength modulation capability of the two channels of the grating is insensitive to the variations in channel size,assuming that the overall waveguide width remains constant.The output wavelength can be tailored freely within a certain range by adjusting the width of the ridge and the material of the cladding layer.

Quantum cascade lasers grown by MOCVD

Sharing the advantages of high optical power,high efficiency and design flexibility in a compact size,quantum cascade lasers(QCLs)are excellent mid-to-far infrared laser sources for gas sensing,infrared spectroscopic,medical diagnosis,and defense applications.Metalorganic chemical vapor deposition(MOCVD)is an important technology for growing high quality semiconductor materials,and has achieved great success in the semiconductor industry due to its advantages of high efficiency,short maintenance cycles,and high stability and repeatability.The utilization of MOCVD for the growth of QCL materials holds a significant meaning for promoting the large batch production and industrial application of QCL devices.This review summarizes the recent progress of QCLs grown by MOCVD.Material quality and the structure design together determine the device performance.Research progress on the performance improvement of MOCVD-grown QCLs based on the optimization of material quality and active region structure are mainly reviewed.

One-Dimensional InP-Based Photonic Crystal Quantum Cascade Laser Emitting at 5.36μm

An InP-based one-dimensional photonic crystal quantum cascade laser is realized. With photo lithography instead of electron beam lithography and using inductively coupled plasma etching, four-period air-semiconductor couples are defined as Bragg reflectors at one end of the resonator. The spectral measurement at 80K shows the quasi-continuous-wave operation with the wavelength of 5.36μm for a 22gm-wide and 2mm-long epilayer-up bonded device.

Waveguide Optimization for a 9.0μm GaAs-Based Quantum Cascade Laser

Improved waveguide designs for 9.0μm GaAs-based quantum cascade laser （QCL） structures are presented. Modal losses and confinement factors are calculated for TM modes with the transfer matrix method （TMM） and effective index method （EIM）. The thicknesses of the cladding layer and waveguide layer, the ridge-width, and the cavity length are all taken into account. Appropriate thicknesses of epilayers are given with lower threshold gain and more economical material growth time.

Waveguide Simulation of a THz Si/SiGe Quantum Cascade Laser

The waveguide design is one of the most important parts in a terahertz quantum cascade laser（QCL）. Si/SiGe QCL waveguides, based on the Drude model and finite-difference time-domain （FDTD） method, are designed by the traditional refractive index waveguide structure, the single-sided metal structure, the double-metal clad structure, and a novel metal/metal silicide structure. The metal/metal silicide structure, showing high modal confinement,is convenient in process engineering and is expected to be a viable waveguide solution for Si/SiGe QCLs in the THz range.

Room Temperature Operation of Strain-Compensated 5.5μm Quantum Cascade Lasers

Room temperature operation is an important criterion for high performance of quantum cascade lasers. A strain-compensated quantum cascade laser（λ≈5.5μm） with optimized waveguide structure lasing at room temperature is reported. Accurate control of layer thickness and strain-compensated material composition is demonstrated using X-ray diffraction. An output power of at least 45mW per facet is realized for a 20μm-wide and 2mm-long laser at room temperature.

High powerλ~8.5μm quantum cascade laser grown by MOCVD operating continuous-wave up to 408 K

Robust quantum cascade laser(QCL)enduring high temperature continuous-wave(CW)operation is of critical importance for some applications.We report on the realization of lattice-matched InGaAs/InAlAs/InP QCL materials grown by metal-organic chemical vapor deposition(MOCVD).High interface quality structures designed for light emission at 8.5μm are achieved by optimizing and precise controlling of growth conditions.A CW output power of 1.04 W at 288 K was obtained from a 4 mm-long and 10μm-wide coated laser.Corresponding maximum wall-plug efficiency and threshold current density were 7.1%and 1.18 kA/cm2,respectively.The device can operate in CW mode up to 408 K with an output power of 160 mW.

Design of surface emitting distributed feedback quantum cascade laser with single-lobe far-field pattern and high outcoupling efficiency

A 7.8-μm surface emitting second-order distributed feedback quantum cascade laser （DFB QCL） structure with metallized surface grating is studied. The modal property of this structure is described by utilizing coupled-mode theory where the coupling coefficients are derived from exact Floquet-Bloch solutions of infinite periodic structure. Based on this theory, the influence of waveguide structure and grating topography as well as device length on the laser performance is numerically investigated. The optimized surface emitting second-order DFB QCL structure design exhibits a high surface outcoupling efficiency of 22% and a low threshold gain of 10 cm-1. Using a π phase-shift in the centre of the grating, a high-quality single-lobe far-field radiation pattern is obtained.

A Broadband Pulsed External-Cavity Quantum Cascade Laser Operating near 6.9μm

We report an external cavity quantum cascade laser （EC-QCL） operating near 6.9μm using the Littman Metcalf configuration. The EC-QCL works in a pulsed mode and can be tuned continuously from 1340 to 1640cm^-1 by only tilting the tuning mirror. The fine tuning ability of the EC-QCL is demonstrated by measuring the absorption spectrum of water in the ambient air with a lock-in amplifier.

Low Power Consumption Distributed-Feedback Quantum Cascade Lasers Operating in Continuous-Wave Mode above 90℃ at λ～7.2μm

We report on the design and fabrication of λ-7.2μm distributed feedback quantum cascade lasers lot very high temperature cw operation and low electrical power consumption. The cw operation is reported above 90℃. For a 2-mm-long and 10-μm-wide laser coated with high-reflectivity on the rear facet, more than 170mW of output power is obtained at 20℃ with a threshold power consumption of 2.4 W, corresponding to 30mW with a threshold power consumption of 3.9 W at 90℃. Robust single-mode emission with a side-mode suppression ratio above 25 dB is continuously tunable by the heat sink temperature or injection current.

Coupled-ridge waveguide quantum cascade laser array lasing at λ~5μm

In this work,we demonstrated high-power quantum cascade laser(QCL)arrays lasing at λ~5μm by employing an optimized coupled-ridge waveguide(CRW)structure.Five-element QCL arrays were simulated and fabricated through a two-step etching method to extend the CRW structure to a mid-wave infrared regime.A lateral far-field with the main peak near a diffraction-limited intensity curve of about 10°was observed by properly designing a geometric shape of the ridges and interspaces.By introducing a buried 2nd-order distributed feedback(DFB)grating,substrate emission with a radiation power above 1 W at 25℃ is achieved.Single longitudinal mode operation is obtained by changing the temperature of the heatsink with a good linear wavelength tuning coefficient of -0.2 cm^(-1)/K.

Broad gain,continuous-wave operation of InP-based quantum cascade laser atλ~11.8μm

We demonstrate a broad gain,continuous-wave(CW)operation InP-based quantum cascade laser(QCL)emitting at 11.8μm with a modified dual-upper-state(DAU)and diagonal transition active region design.A 3 mm cavity length,16.5μm average ridge wide QCL with high-reflection(HR)coatings demonstrates a maximum peak power of 1.07 W at 283 K and CW output power of 60 m W at 293 K.The device also shows a broad and dual-frequency lasing spectrum in pulsed mode and a maximum average power of 258.6 mW at 283 K.Moreover,the full width at half maximum(FWHM)of the electroluminescent spectrum measured at subthreshold current is 2.37μm,which indicates a broad gain spectrum of the materials.The tuning range of 1.38μm is obtained by a grating-coupled external cavity(EC)Littrow configuration,which is beneficial for gas detection.

Applicability of an eddy covariance system based on a close-path quantum cascade laser spectrometer for measuring nitrous oxide fluxes from subtropical vegetable fields

The soil of subtropical vegetable fields is an important source of the atmospheric greenhouse gas nitrous oxide（N2O）. In a field study in subtropical China, the authors used an eddy covariance（EC）system based on a close-path quantum cascade laser（QCL） spectrometer to measure N2O fluxes from a vegetable field. During the experimental period from 9 October 2014 to 18 February 2015,the observed half-hourly N2O fluxes ranged from.10.7 to 1077.4 μg N m^-2h^-1, with a mean value of99.3 μg N m^-2h^-1. The detection limit（95% confidence level） of the EC system for half-hourly fluxes was estimated at 18.5 μg N m^-2h^-1, i.e. smaller than 97.5% of all measured fluxes, and within the range of the lower limit of reported N2O emissions from subtropical vegetable fields. The random uncertainties in the half-hourly fluxes were estimated at 60% on average, of which 62% was due to stochastic variations caused by turbulence and 38% by instrumental noise. The flux systematic uncertainties were estimated at.18% on average, mainly due to the spectral attenuation; however,this negative bias had already been corrected for by calculating half-hourly fluxes. In conclusion,the close-path QCL-based EC technique is capable of measuring the N2O fluxes from the subtropical vegetable fields of China with high reliability and accuracy.

Tunable characteristic of phase-locked quantum cascade laser arrays

A multimode interference(MMI)structure is designed to simplify the fabrication of quantum cascade laser(QCL)phase-locked arrays.The MMI geometry is optimized with a sufficient output channel distance to accommodate conventional photolithography and wet etching process by which power amplifier array is fabricated without using the complicated two-step etching-regrowth or dry etching technique.The far-field pattern with periodically modulated peaks reveals that the beams from the arrays are phase-locked.Furthermore,the frequency tuning performance of the MMI-based phase-locked arrays is studied using the Littrow-configuration external cavity structure.A wavelength tuning range of more than 60 cm^(−1) is demonstrated,which will eventually realize the high power,frequency tunable,large-scale phase-locked arrays,and their application in spectroscopy.

Beam steering characteristics in high-power quantum-cascade lasers emitting at∼4.6µm

A beam steering effect of high-power quantum cascade(QC) lasers emitting at 4.6 μm was investigated. The continuous wave(CW) output power of an uncoated, 6-mm-long, 7.5-μm-wide buried-heterostructure QC laser at 25℃ was as high as 854.2 m W. The maximum beam steering angle was offset by ±14.2° from the facet normal(0°) in pulsed mode. The phenomenon was judged explicitly by combining the diffraction limit theory and Fourier transform of the spectra. It was also verified by finite element method software simulation and the calculation of two-dimensional(2 D)effective-index model. The observed steering is consistent with a theory for coherence between the two lowest order lateral modes. Therefore, we have established an intrinsic linkage between the spectral instabilities and the beam steering by using the Fourier transform of the spectra, and further presented an extremely valid method to judge the beam steering. The content of this method includes both three equidistant peak positions in the Fourier transform of the spectra and the beam quality located between once the diffraction limit(DL) and twice the DL.

Single-Mode Fabry-Pérot Quantum Cascade Lasers at λ ~10.5 μm

In this paper, we report a single-mode Fabry-Pérot long wave infrared quantum cascade lasers based on the double phonon resonance active region design. For room temperature CW operation, the wafer with 35 stages was processed into buried heterostructure lasers. For a 4 mm long and 13 μm wide laser with high-reflectivity (HR) coating on the rear facet, continuous wave output power of 43 mW at 288 K and 5 mW at 303 K is obtained with threshold current densities of 2.17 and 2.7 kA/cm2. The lasing wavelength is around 10.5 μm. Single mode emission was observed for this particular device over the whole investigated current and temperature range.