Incised valley filling deposits:an important pathway system for long-distance hydrocarbon migration—a case study of the Fulaerji Oilfield in the Songliao Basin

In this paper, incised valley filling deposits, which formed an important pathway system for long-distance hydrocarbon migration, are discussed in detail based on core and logging data. The sequence SQy23 of the Cretaceous Yaojia Formation is the main hydrocarbon-bearing layer in the Fulaerji Oilfield. The hydrocarbon source of the oilfield is the Qijia-Gulong Sag which is about 80 km away from the Fulaerji Oilfield. The transport layer of long-distance hydrocarbon migration is the overlapped sandstone complex which fills the incised valley. The incised valley developed during the depositional period from the late Qingshankou Formation to the early Yaojia Formation of Cretaceous （SQqna-SQy0 was about 70 km long and 20 km wide, and extended in the NW-SE direction. The overlapped filling of the incised valley mainly occurred in the expanding system tract of the third-order sequence SQy23 （ESTy23）. Towards the basin, incised valley filling deposits overlapped on the delta developed in the early period, and towards the basin margin, incised valley filling deposits were covered by the shore-shallow lacustrine sandy beach bar developed in the maximum flooding period. All of the delta, the incised valley filling and the shore-shallow sandy beach bar are sandstone-rich, and have high porosity and permeability, and can form an effective hydrocarbon migration and accumulation system. Deltaic sand bodies collected and pumped hydrocarbon from the active source, incised valley filling depositional system completed the long-distance hydrocarbon migration, and lithological traps of shore-shallow lacustrine sandy beach bar accumulated hydrocarbon. The incised valley filling sequences are multi-cycle： an integrated shortterm filling cycle was developed on the erosion surface, and the sequences upward were mud-gravel stone, medium-fine sandstone containing terrigenous gravels and muddy pebbles with cross bedding, silty mudstone with ripple bedding, and mudstone. The incised valley filling deposits are characterized by a strong heterogeneity and the main hydrocarbon migration pathway is the medium-fine sandstone interval.

Preferential petroleum migration pathways and prediction of petroleum occurrence in sedimentary basins:A review

The aim of this paper is to review the major points of contention concerning secondary petroleum migration, to discuss the nature and primary controls of the positions of petroleum migration pathways in sedimentary basins, and to illustrate the importance of preferential petroleum migration pathways for the formation of large oil/gas fields away from generative kitchens. There is competition between the driving force （buoyancy） and the restraining force （capillary pressure controlled largely by permeability contrast） in controlling the positions of petroleum migration pathways in heterogeneous carrier beds. At a large scale, there is a critical angle of dip of the carrier beds which determines the relative importance of structural morphology or permeability contrasts in controlling the positions of petroleum migration pathways in heterogeneous carrier beds. Maximum-driving-force-controlled migration pathways occur in carrier beds with an angle of dip greater than the critical dip and the positions of petroleum migration pathways are controlled mainly by the morphology of the sealing surfaces. Minimum-restraining-force-determined migration pathways occur in carrier beds with an angle of dip smaller than the critical angle where permeability contrasts would exert a more important influence on the positions of petroleum migration pathways. Preferential petroleum migration pathways （PPMP）, defined as very restricted portions of carrier-beds that focus or concentrate petroleum from a large area of the generative kitchen, determine the distribution of oil and gas in sedimentary basins. The focusing of petroleum originating from a large area of the generative kitchens into restricted channels seems to be essential not only for long-range petroleum migration in hydrostatic conditions, but also for the formation of large oil or gas fields. Regions may miss out on petroleum migration because of its three-dimensional behavior, and two-dimensional migration modeling may be misleading in predicting petroleum occurrences in certain circumstances.

Geochemical Characteristics and Migration Pathways of Ordovician Carbonate Oil Reservoirs in the Tuoputai Area,Tarim Basin,Northwestern China

Exploration potential is huge and the oil resources are rich in the Ordovician reservoirs of the Tarim Basin.However,the mechanism of hydrocarbon accumulation is complex and not yet fully understood.In the Tuoputai area,the hydrocarbon migration pathways and characteristics of deep hydrocarbon accumulation are revealed through analyses of the physical data of rich oil and gas,the geochemical parameters of oil,and fluid inclusions.The results show that the Ordovician oils in the Tuoputai area have the same geochemical characteristics as the mixed oil from the Lower Cambrian source rock and the Middle–Upper Ordovician source rock.The Ordovician reservoirs have been charged three times:in the late Caledonian,late Hercynian,and Himalayan stages.Oil charging occurred in the Hercynian stage,in particular,as it is the main filling period of hydrocarbon.The north-northeast(NNE)-trending TP12 CX major fault,active in in these times and is dominant migration channel of hydrocarbon,but there is segmentation affected by the difference of activities.Oil maturity is higher in the south than in the north and is abnormally high near the major fault.Parameters related to migration indicate that oil migrated northeastward along the NNE-trending TP12 CX major fault and adjusted laterally along the secondary faults and weathering crust,forming the present characteristics of oil and gas distribution.

Types,Characteristics and Significances of Migrating Pathways of Gas-bearing Fluids in the Shenhu Area,Northern Continental Slope of the South China Sea

The first marine gas hydrate expedition in China has been conducted by Guangzhou Marine Geological Survey in the Shenhu Area, northern continental slope of the South China Sea. Previous study has analyzed the P-T conditions, geophysical anomalies and saturation calculations of these gas hydrates, but has not documented in detail the migration of gas-bearing fluids in the study area. Based on the interpretations of 2D/3D seismic data, this work identified two types of migration pathways for gas-bearing fluids in the Shenhu area, i.e., vertical and lateral pathways. The vertical pathways（largescale faults, gas chimneys and mud diapirs） presented as steep seismic reflection anomalies, which could be traced downward to the Eocene source rocks and may penetrate into the Late Miocene strata. The deeper gases/fluids might be allowed migrating into the shallower strata through these vertical conduits. However, the distributions showed distinct differences between these pathways. Large-scale faults developed only in the north and northeast of the Shenhu area, while in the drilling area gas chimneys were the sole vertical migration pathways. Since the Pliocene, normal faults, detachment faults and favorable sediments have constituted the lateral pathways in the Shenhu gas hydrate drilling area. Although these lateral pathways were connected with gas chimneys, they exerted different effects on hydrate formation and accumulation. Gas-bearing fluids migrated upward along gas chimneys might further migrate laterally because of the normal faults, thereby enlarging the range of the chimneys. Linking gas chimneys with the seafloor, the detachment faults might act as conduits for escaping gases/fluids. Re-deposited sediments developed at the early stage of the Quaternary were located within the gas hydrate stability zone, so hydrates would be enriched in these favorable sediments. Compared with the migration pathways（large-scale faults and mud diapirs） in the LW3-1 deep-sea oil/gas field, the migration efficiency of the vertical pathways（composed of gas chimneys） in the gas hydrate drilling area might be relatively low. Description and qualitative discrimination of migration pathways in the Shenhu gas hydrate drilling area are helpful to further understand the relationship between good-quality deep source rocks and shallow, mainly biogenicallyproduced, hydrates. As the main source rocks of the Baiyun sag, lacustrine mudstones in the Wenchang and Enping Formations may provide thermogenic methane. Gas chimneys with relatively low migration efficiency created the vertical pathways. Caused by the Dongsha tectonic movement, the release of overpressured fluids might reduce the vertical migration rates of the thermogenic methane. The thick bathyal/abyssal fine-grained sediments since the Late Miocene provided migration media with low permeability. These preconditions may cause carbon isotopic fractionation ofthermogenic methane during long-distance vertical migrations. Therefore, although geochemical analyses indicate that the methane forming gas hydrate in the Shenhu area was mainly produced biogenically, or was mixed methane primarily of microbial origin, thermogenic methane still contribute significantly.

Petroleum Migration Characteristics in the Northeastern Part of the Baiyun Depression,Pearl River Mouth Basin,South China Sea

This paper investigates the origin and migration characteristics of petroleum in the northeastern part of the Baiyun Depression,Pearl River Mouth Basin(PRMB).The discovered petroleum in the study area is mainly located in the Lower Zhujiang Member(N_(1)z^(2))and mainly originated from the Enping Formation source rocks in the eastern sag.Active faults(vertical migration)and N_(1)z^(2)sandstones(lateral migration)acted as the petroleum migration systems.The fault activities in the Dongsha event controlled the episodic petroleum migration.Fractures in the fault zones provided effective conduits,and overpressure was the driving force.The vertical migration could not cross the fault zones laterally.The petroleum injection areas in the carrier beds were the contact zones of petroleum-migration faults and carrier beds.The lateral migration was steady-state migration,and buoyancy was the driving force.The migration pathways in the carrier beds were controlled by the structural morphology.Secondary petroleum migration in the study area could be divided into two parts:vertical migration along the fractures in the fault zones and lateral migration through preferential petroleum migration pathways(PPMPs)in the carrier beds.The petroleum migration behaviors,including migrating direction,driving force,and migration pattern,in the faults and sandstone carrier beds were quite different.This study provides a typical example for comprehending secondary migration processes and has great importance for determining future exploration targets in the deep-water area of the PRMB.

Oxygen vacancy formation and migration in Sr- and Mg-doped LaGaO_3:a density functional theory study

Oxygen vacancy formation and migration in La0.9Sr0.1Ga0.8Mg0.2O3-5 （LSGM） with various crystal symmetries （cubic, rhombohedral, orthorhombic, and monoclinic） are studied by employing first-principles calculations based on density functional theory （DFT）. It is shown that the cubic LSGM has the smallest band gap, oxygen vacancy formation energy, and migration barrier, while the other three structures give rise to much larger values for these quantities, implying the best oxygen ion conductivity of the cubic LSGM among the four crystal structures. In out calculations, one oxygen vacancy migration pathway is considered in the cubic and rhombohedral structures due to all the oxygen sites being equivalent in them, while two vacancy migration pathways with different migration barriers are found in the orthorhombic and monoclinic symmetries owing to the existence of nonequivalent O1 and 02 oxygen sites. The migration energies along the migration pathway linking the two 02 sites are obviously lower than those along the pathway linking the O1 and 02 sites. Considering the phase transitions at high temperatures, the results obtained in this paper can not only explain the experimentally observed different behaviours of the oxygen ionic conductivity of LSGM with different symmetries, but also predict the rational crystal structures of LSGM for solid oxide fuel cell applications.

Paleoporosity and critical porosity in the accumulation period and their impacts on hydrocarbon accumulation—A case study of the middle Es3 member of the Paleogene formation in the Niuzhuang Sag, Dongying Depression, Southeastern Bohai Bay Basin, East Chi

Similar reservoir sandbodies and fault conduit systems in the sandstone reservoirs in the middle Es3 member of the Niuzhuang Sag have been problematic for a long time. The following problems remain unsolved： 1） The distribution of sandstone porosity is inconsistent with the hydrocarbon accumulation. The oil sandstones have low porosity instead of high porosity. 2） Sandstones, which have the same properties, have different levels of oiliness, and the sandstones with almost the same properties show different degrees of oil-bearing capacity. This study analyzes the condition of reservoirs in the research area during the accumulation period in terms of paleoporosity estimation and discusses the critical porosity of the sandstone reservoirs during the same period. The following conclusions can be drawn from the results. 1） Although reservoir properties are low at present and some reservoirs have become tight, the paleoporosity ranging from 18% to 25% is greater than the critical porosity of 13.9%. As the： loss of porosity is different in terms of burial history, the present porosity cannot reflect porosity during the accumulation period. Similar/y, high porosity during the accumulation period does not indicate that tbe present porosity is high. 2） The present reservoir location is consistent with the distribution of high paleoporosity during the accumulation period. This result indicates that high porosity belts are prone to hydrocarbon accumulation because of the dominant migration pathways generated as a result of property discrepancies under similar fault conduit conditions. Consequently, the hydrocarbon mainly accumulates in high porosity belts. Paleoporosity during the accumulation period is found to be a vital controlling factor. Therefore, high paleoporosity sandstones in the middle Es3 member of the Niuzhuang Sag have great potential for future exploration.

Accumulation Mechanisms and Evolution History of the Giant Puguang Gas Field,Sichuan Basin,China

Solid bitumens were found throughout the carbonate reservoirs in the Puguang gas field, the largest gas field so far found in marine carbonates in China, confirming that the Puguang gas field evolved from a paleo-oil reservoir. The fluid conduit system at the time of intensive oil accumulation in the field was reconstructed, and petroleum migration pathways were modeled using a 3-D model and traced by geochemical parameters. The forward modeling and inversion tracing coincided with each other and both indicated that oils accumulated in the Puguang-Dongyuezhai structure originated from a generative kitchen to the northwest of the Puguang gas field. The deposition of organic-rich Upper Permian source rocks dominated by sapropelic organic matter in the Northeast Sichuan Basin, the development of fluid conduit system that was vertically near-source rock and laterally near-generative kitchen, and the focusing of oils originated from a large area of the generative kitchen, were the three requirements for the formation of the giant paleo-oil reservoir from which the giant Puguang gas field evolved. The Puguang gas field had experienced a three-stage evolution. The post-accumulation processes, especially the organic-inorganic interaction in the hydrocarbon-water-rock system, had not only profoundly altered the composition and characteristics of the petroleum fluids, but also obviously changed the physicochemical conditions in the reservoir and resulted in complicated precipitation and solution of carbonate minerals.

Origin of Oils in“Subtle pools”in the Dongying Depression,Bohai Bay Basin, China

Subtle traps or oil pools have become an important exploration play in the Dongying Depression, Bohai Bay Basin, east China. Despite recent successes in exploration, the formation mechanisms of subtle traps are still not well understood. The majority of subtle oil pools in the Dongying Depression are developed in the middle interval of the Es3 Member of the Paleogene Shahejie Formation with the subtle traps being primarily of lenticular basin-floor turbidite sands encompassed in mudstones. Oil in the subtle traps was previously thought to have migrated directly from the surrounding source rocks of the same formation （Es3）. Detailed geochemical investigation of 41 oils and 41 rock samples from the depression now indicates that the oils from the subtle traps cannot be correlated well with the surrounding Es3 source rocks, which are characterized by high Pr/ Ph （〉1）, low Gammacerane/C30hopane, representing a freshwater lacustrine setting. In contrast the oils features low Pr/Ph （〈1） and relatively high Gammacerane content, showing a genetic affinity with the underlying Es4 source rocks, which also have the same qualities, indicating a brackish lacustrine setting. Oils in the Es3 subtle traps are probably derived from mixed sources with the contribution from the upper Es4 source rocks predominating. Therefore unconventional oil migration and accumulation mechanisms need to be invoked to explain the pooling of oils from the ES4 source rocks, which probably came through a thick low interval of the Es3 source rocks with no apparent structural or stratigraphic pathways. We suggest that the subtle oil migration pathway probably plays an important role here. This finding may have significant implications for future exploration and the remaining resource evaluation in the Dongying Depression.

Preferential Petroleum Migration Pathways in Eastern Pearl River Mouth Basin,Offshore South China Sea

Secondary petroleum migration in the eastern Pearl River Mouth basin was modeled using the three-dimensional PATHWAYSTM model, which assumes that the positions of petroleum migration pathways are controlled by the morphology of the sealing surfaces. The modeling results have accurately predicted the petroleum occurrences. Most commercial petroleum accumulations are along the predicted preferential petroleum migration pathways （PPMP）, and most large fields （petroleum reserves greater than 1×10^8t） have more than one preferential petroleum migration pathways to convey petroleum to the traps. The lateral migration distance for oil in the LHII-1 field, the largest ollfield so far discovered in the Pearl River Mouth basin, was more than 80 km. The case study suggests that in lacustrine fault basins, petroleum can migrate over a long distance to form large oilfields without driving force from groundwater flow. The focusing of petroleum originating from a large area of the generative kitchens into restricted channels seems to be essential not only for long-range petroleum migration in hydrostatic conditions, but also for the formation of large oil or gas fields. The strong porosity and permeability heterogeneities of the carrier beds and the relatively high prediction accuracy by a model that does not take into consideration of the effect of heterogeneity suggest that the positions of petroleum migration pathways in heterogeneous carrier beds with relatively large dipping angles are determined primarily by the morphology of the sealing surfaces at regional scales.

Characteristics and Formation Mechanism of Polygonal Faults in Qiongdongnan Basin, Northern South China Sea

Based on high-resolution 3D seismic data, we document the polygonal faults within the Miocene Meishan （梅山） Formation and Huangliu （黄流） Formation of the Qiongdongnan （琼东南） basin, northern South China Sea. Within the seismic section and time coherent slice, densely distributed extensional faults with small throw and polygonal shape were identified in map view. The orientation of the polygonal faults is almost isotropic, indicating a non-tectonic origin. The deformation is clearly layer-bounded, with horizontal extension of 11.2% to 16%, and 13.2% on average. The distribution of polygonal faults shows a negative correlation with that of gas chimneys. The development of polygonal faults may be triggered by over-pressure pore fluid which is restricted in the fine-grained sediments of bathyal facies when the sediments is compacted by the burden above. The polygonal faults developed to balance the volumetric contraction and restricted extension. The product of hydrocarbon in the Meishan Formation may have contributed to the development of the polygonal faults. In the study area, it was thought that the petroleum system of the Neogene post-rift sequence is disadvantageous because of poor migration pathway. However, the discovery of polygonal faults in the Miocene strata, which may play an important role on the fluid migration, may change this view. A new model of the petroleum system for the study area is proposed.

Reservoir forming conditions and key exploration technologies of Lingshui 17-2 giant gas field in deepwater area of Qiongdongnan Basin

On September 15,2014,China National Offshore Oil Co.,Ltd announced that a high production of oil and gas flow of 1.6
106 m3/d was obtained in Well LS17-2-1 in deepwater area in northern South China Sea,which is the first great oil and gas discovery for self-run deepwater exploration in China sea areas,and a strategic breakthrough was made in natural gas exploration in deepwater area of Lingshui sag in Qiongdongnan Basin.Under the combined action of climax of international deepwater exploration,high oil prices,national demands of China,practical needs of exploration,breakthroughs in seismic exploration and testing technologies,innovations in geological cognition and breakthroughs in deepwater operation equipment,Lingshui 17-2 gas field is discovered.Among these factors,the innovation in reservoir forming geological cognition directly promotes the discovery.The quality of seismic data in the early time is poor,so key reservoir forming conditions such as effective source rocks,high quality reservoirs and oil-gas migration pathways are unable to be ascertained;with support of new seismic acquisition and processing technology,some researches show that Lingshui sag is a successive large and deep sag with an area of 5000 km2 and the maximum thickness of Cenozoic stratum of 13 km.In the Early Oligocene,the Lingshui sag was a semi-closed delta-estuarine environment,where the coalmeasure and marine mudstones in Lower Oligocene Yacheng Formation were developed.The Lingshui sag is a sag with high temperature,and the bottom temperature of source rocks in Yacheng Formation can exceed 250C,but the simulation experiment of hydrocarbon generation at high temperature indicates that the main part of this set of source rock is still in the gas-generation window,with resources of nearly 1 trillion cubic meters,so the Lingshui sag is a hydrocarbon-rich generation sag.In the Neogene,the axial canyon channel from the Thu Bon River in Vietnam passed through the Lingshui sag,and five stages of secondary channels were developed in the axial canyon channel,where four types of reservoirs with excellent physical properties including the axial sand,lateral accretion sand,natural levee sand as well as erosion residual sand were developed,and lithologic traps or structural-lithologic traps were formed.The diapiric zone in the southern Lingshui sag connects deep source rocks in Yacheng Formation and shallow sandstones in the channels,and the migration pattern of natural gas is a T-type migration pattern,in other words,the natural gas generated from Yacheng Formation migrates vertically to the interior of the channel sandbody,and then migrates laterally in the channel reservoirs and forms the reservoirs.Innovations of geophysical exploration technologies for complicated geological conditions of deepwater areas are made,such as the detuning comprehensive quantitative amplitude hydrocarbon detection technology,which greatly improves the success rate of deepwater exploration;key technologies of deepwater safety exploratory well testing represented by the platform-dragged riser displacement technology are developed,which greatly reduces the drilling test cost.The above key exploration technologies provide a strong guarantee for the efficient exploration and development of Lingshui gas field.

Enrichment factors and sweep spot evaluation of Jurassic tight oil in central Sichuan Basin,SW China

The secondary migration mechanism,enrichment factors of Jurassic tight oil in central Sichuan Basin were well investigated through physical simulation experiment of reservoir formation,casting and fluorescent thin sections,field emission scanning electron microscope(FESEM)and environment scanning electron microscope(ESEM).The results show that migration of Jurassic tight oil in central Sichuan Basin is a low-velocity non-Darcy flow through low-efficient migration path under the huge migration driving force,and has three migration and seepage stages,i.e.viscous flow stage,nonlinear seepage stage,and quasi-liner seepage stage.Microscopically,the migration pathway of tight oil is the porefracture composite conduction;macroscopically,the migration mode of tight oil is the large-scale shortedistance migration.Distribution of favorable zones of tight oil is controlled by distribution of high-quality source rocks.The hydrocarbon-generation strength of 0.4
106 t/km2 can be as a threshold to determine favorable zone of tight oil in the study area.The reservoirs with high permeability and high porosity can form tight oil sweet spots,and the development degree of fractures is closely related to well with high yield of tight oil well.