An oxygenating colloidal bioink for the engineering of biomimetic tissue constructs

Ensuring a sufficient oxygen supply is pivotal for the success of bioprinting applications since it fosters tissue integration and natural regeneration.Variation in oxygen concentration among diverse tissues necessitates the precise recreation of tissue-specific oxygen levels in imprinted constructs to support the survival of targeted cells.Although oxygen-releasing biomaterials,such as oxygen-generating microparticles(OMPs),have shown promise for enhancing the oxygen supply of microenvironments in injured tissues,whether this approach is scalable for large tissues and whether tissue-specific bioinks with varying OMP concentrations remain printable remain unknown.This study addresses this critical gap by introducing an innovative class of engineered oxygenated bioinks that combine colloidal-based microgels with OMPs.We report that incorporating nanosized calcium peroxide(nCaO_(2))and manganese oxide nanosheets(nMnO_(2))into hydrophobic polymeric microparticles enables precise modulation of oxygen release while controlling hydrogen peroxide release.Moreover,the fabrication of oxygenating and cytocompatible colloidal gels is achieved using an aqueous two-phase system.This study thoroughly evaluates the fundamental characteristics of the resulting bioink,including its rheological behaviors,printability,shape fidelity,mechanical properties,and oxygen release properties.Moreover,this study demonstrates the macroscopic scalability and cytocompatibility of printed constructs produced via cell-laden oxygenating colloidal bioinks.By showcasing the effectiveness of extrusion-based bioprinting,this study underscores how it can be used to fabricate biomimetic tissues,indicating its potential for new applications.The findings presented here advance the bioprinting field by achieving scalability with both high cell viability and the possibility of mimicking specifically oxygenated tissues.This work thereby offers a promising avenue for the development of functional tissues with enhanced physiological relevance.

Photostability of colloidal single photon emitter in near-infrared regime at room temperature

The photostability of a colloidal single photon emitter in near-infrared regime at room temperature is investigated.The fluorescence lifetime,blinking phenomenon,and anti-bunching effect of a single CdTeSe/ZnS quantum dot with an emission wavelength of 800 nm at room temperature are studied.The second-order correlation function at zero delay time is much smaller than 0.1,which proves that the emission from single quantum dots at 800 nm is a highly pure single-photon source.The effects of the irradiation duration on the fluorescence from single quantum dots are analyzed.The experimental results can be explained by a recombination model including a multi-nonradiative recombination center model and a multi-charged model.

Special Issue:Carbohydrate Hydrocolloids in Food Systems:from Structure to Human Health

Preface Carbohydrate hydrocolloids mainly refer to the carbohydrate polymers and oligomers that can form colloidal systems when dispersed in water.A great variety of these poly saccharides and oligosaccharides are used as functional food additives,such as starch,modified starch,pectin,xanthan,carrageenans,gellan gum,alginate,galactomannans(e.g.,guar gum and locust bean gum),gum Arabic or acacia gum,gum karaya,gum tragacanth,carboxymethyl cellulose,and various oligosaccharides,to name but a few.

Colloidal Gold Immunochromatographic Assay for Rapid On-Site Detection of Tetracycline in Seawater

Recently increasing concerns from the scientists and public have been paid for seawater pollution due to tetracycline(TC)overuse in maricultural area.However,there are few methods or instruments that can be used for specific and rapid detection of this antibiotic in seawater.In this study,the colloidal gold immunochromatographic assay(CG-ICA)was used to achieve this goal.A commercialized monoclonal antibody against TC(anti-TC mAb)was selected because of its higher sensitivity(half-maximal inhibitory concentration of 2.38μgL^(-1)).The prepared CG particles(average diameter of 20 nm)were used to label anti-TC mAb at pH 8.0.The conjugate pad was formed by spraying the CG-labeled anti-TC mAb on a glass fibre membrane followed by proper dryness.The test pad was made by immobilizing artificial antigen and anti-mouse mAb in the test line and the control line,respectively,in a nitrocellulose membrane.The test strip,assembled with sample pad,conjugate pad,test pad and absorbent pad,could be used to detect TC during seawater sample flowing through these components in turn.The results could be observed by the naked eye in 10min.The visible limit of detection(vLOD)was 20μgL^(-1) for TC in seawater.The CG-ICA test results were in good agreement with those of liquid chromatography-tandem mass spectrometry(LC-MS/MS).The assay also showed that,oxytetracycline(OTC)and chlortetracycline(CTC),as the structural analogues of TC,did not interfere with TC determination.Furthermore,the TC concentration given by test strip could not be affected by the fluctuation of temperature(10℃–30℃),pH(7–9)and salinity(0–40)of seawater.Therefore,CG-ICA is a suitable tool for rapid,on-site,and semi-quantitative detection of TC in seawater.

A Furan-Substituted Polymeric Hole-Transporting Material for Energy Level Regulation and Less Planarity in Colloidal Quantum Dot Solar Cells

For efficient colloidal quantum dot(CQD)solar cells(CQD-SCs),thiol-passivated p-type CQDs are generally used as a hole-transporting material(HTM);however,there are issues with the control of optoelectrical properties,low thiol passivation rate,and poor morphology with a power conversion efficiency(PCE)of approximately 11%.Although polymeric HTMs have been introduced to address these issues,maximizing efficiency and achieving green-solvent processability and thermal stability for commercialization is necessary.Here,we synthesize a novel benzodifuran(BDF)-based HTM(asy-ranPBTBDF)showing an electron-deficient state,low steric hindrance,and low planarity compared to those of a typical benzodithiophene(BDT)-based HTM(asy-ranPBTBDT).BDF properties lead to deep high occupied molecular orbital(HOMO)levels,closeπ-πstacking,excellent solubility,and amorphous properties related to efficiency,green-solvent processability,and thermal stability.With these benefits,the asy-ranPBTBDF-based CQD-SC showed enhanced open-circuit voltage(Voc)(0.65 V)and PCE(13.29%)compared to those of the asy-ranPBTBDT-based device(0.63 V and 12.22%)in toxic processes with chlorobenzene.The asy-ranPBTBDF-based CQD-SC showed a PCE of 12.51%in a green-solvent process with 2-methylanisole and improved thermal stability at 80℃(83.8%retaining after 24 h)owing to less lateral crystallization than the asy-ranPBTBDT-based device(60.8%retaining after 24 h).

Characterization and stability of sedimentary colloids in different ecology regions in Taihu Lake

Colloidal particles,heterogeneous mixture with various organic components and continuous molecular weight(MW)distribution,is omnipresent in lake sediments and substantially influence the retention,transportation,and fate of contaminants in lake ecosystem.We sampled and extracted sedimentary colloids from different ecology regions in Taihu Lake,Jiangsu,East China,in June 2020,and they were further separated into four different particle size ranges by tangent ultrafiltration,and the properties of colloids were studied in various methods,including zeta potential analysis,transmission electron micrograph images(TEM),Fourier transformation infrared(FTIR),and 3D fluorescence.Results show that the surface of the colloids is covered with organic macromolecular substances,such as humuslike substances and protein-like substances.There were significant differences in molecular weight and fraction content of colloids in the sediments from macrophyte-dominant(MD)area and algae-dominant(AD)area in the lake.Colloids from MD area are mainly composed of humic acid,protein,and fulvic acid;the content of fulvic acid is lower than that of humic acid and protein.The humic acid exists mainly in small molecular weight(10-100 kDa),protein exists in mainly large molecular weight colloids(0.45-1μm).Colloids from AD area are mainly composed of humic acid,and mainly distributed in the molecular weight(10 kDa-0.45μm).The presence of humic acid inhibits effectively the agglomeration of the colloids.Especially,the stability of colloids is closely related to the molecular weight,with low molecular weight from MD area show higher stability.The existence of humic acid in colloids increases the electrostatic repulsion between colloidal particles,which can effectively inhibit the agglomeration of colloids,thus enhancing the stability of colloids.Furthermore,both monovalent and divalent electrolytes enhance colloidal aggregation,and the low-molecular-weight(LMW)colloid fraction exhibits higher stability efficiency than the high-molecular-weight(HMW)colloidal.

Review of roll-to-roll fabrication techniques for colloidal quantum dot solar cells

Colloidal quantum dots(CQDs)are of great interest to photovoltaic(PV)technologies as they possess the benefits of solution-processability,size-tunability,and roll-to-roll manufacturability,as well as unique capabilities to harvest near-infrared(NIR)radiation.During the last decade,lab-scale CQD solar cells have achieved rapid improvement in the power conversion efficiency(PCE)from~1%to 18%,which will potentially exceed 20%in the next few years and approach the performance of other PV technologies,such as perovskite solar cells and organic solar cells.In the meanwhile,CQD solar cells exhibit long lifetimes either under shelf storage or continuous operation,making them highly attractive to industry.However,in order to meet the industrial requirements,mass production techniques are necessary to scale up the fabrication of those lab devices into large-area PV modules,such as roll-to-toll coating.This paper reviews the recent developments of large-area CQD solar cells with a focus on various fabrication methods and their principles.It covers the progress of typical large-area coating techniques,including spray coating,blade coating,dip coating,and slot-die coating.It also discusses next steps and new strategies to accomplish the ultimate goal of the low-cost large-area fabrication of CQD solar cells and emphasizes how artificial intelligence or machine learning could facilitate the developments of CQD solar cell research.

Stability of Soil and Biosolid Nanocolloid and Macrocolloid Particles in the Absence and Presence of Arsenic, Selenium, Copper and Lead

Due to their enhanced stability and contaminant transport potential, environmental nanoparticles derived from soil and biosolid materials may pose a considerable risk to groundwater quality. Very little information exists on the stability and transportability of environmental or natural nanocolloids in the presence of As, Se, Pb and Cu contaminants, all of which are considered to represent substantial threats to human and animal populations through groundwater contamination. This study involved stability settling experiments of nanocolloids (NCs) (<100 nm) and macrocolloids (MCs) (100 - 2000 nm) fractionated from Bt horizons of three Kentucky soils and one biosolid waste material in water suspensions of 0, 2, and 10 mg·L-1 of As, Se, Pb and Cu. The results indicated greater stability in the mineral than the biosolid colloid fractions, and enhanced stability of NCs over corresponding MCs in the presence or absence of contaminants at low contaminant loads. At high contaminant loads nearly all colloids were unstable except for the bio-nanocolloids which still sustained considerable stability. At low contaminant loads, the MC fraction stability sequence was smectitic > mixed > kaolinitic > biosolid. Among the nano-fractions, the smectitic and kaolinitic colloids demonstrated lower stability than the MCs, but higher than those of the mixed and biosolid fractions. Physicochemical characterizations indicated that extensive organic carbon surface coatings and higher Al/Fe:Si ratios may have induced higher stability in the NC fractions, but their overall stability may also have been hindered in some cases by nano-aggregation phenomena.

A Review of Colloid Transport in Fractured Rocks

Recent recognition of colloid and colloidassociated transport of strongly sorbing contaminants in fractured rocks highlights the importance of exploring the transport behavior of colloids under conditions prevailing in the field.The rapid transport of colloids through fractured rocks-as affected by the hydraulic properties of the flow system,the properties of fracture surface and the geochemical conditionshas not been sufficiently elucidated,and predictions of colloid transport through fractures have encountered difficulties,particularly at the field scale.This article reviews the current understanding of the mechanisms and modeling of colloid transport and retention in fractured rocks.Commonly used experimental techniques and approaches for conducting colloid transport experiments at different scales,ranging from the laboratory to the field scale,are summarized and commented upon.The importance of various interactions(e.g.,dissolution,colloid deposition,generation,mobilization and deposition of filling materials within fractures) between the flowing solution and the fracture walls(in many cases,with skin or coating on the host rock at the liquid-solid interface) has been stressed.Colloid transport through fractures of high heterogeneity has not yet been well understood and modeled at the field scale.Here,we summarize the current knowledge and understanding accumulated in the last two decades in regard to colloid and colloidassociated transport through fractures.Future research needs are also discussed.

Three-dimensional Ordered Silica Colloidal Film Self-assembly Deposited on a VerticalSubstrate

A method for preparation of particle crystal film constructed from monodisperse silica colloidal particles in diameter of about 300 nm is reported. The films were prepared from an ethanol suspension by vertical deposition that relies on capillary forces to assemble colloidal crystal particles on a vertical substrate. The 3D ordered films were characterized by transmission spectra and scanning electric microscope (SEM). The effect of evaporation temperature, particle concentration and sintered temperature on the quality of colloidal particle crystal film was investigated.

Radionuclide Colloid ^(32)P Used for the Treatment of Stage II Lung Cancer by Video Enhanced Minimal Access Muscle Sparing Thoracotomy

Objective: To study the feasibility of radionuclide colloid 32P used for the treatment of stage II lung cancer by video enhanced minimal access muscle sparing thoracotomy (VEMAST). Methods: Video assisted thoracoscopic surgery (VATS) was carried out under general anesthesia. A double lumen endobronchial tube was intubated into trachea. One lung ventilation of the healthy side was done during operation. An incision of 8–10 cm long was made along the 4th or 5th intercostals. The lobectomy could be performed under VATS. Radionuclide colloid 32P was injected locally into the area where surgical cleaning of lymph node around was considered to be unsatisfactory or desection of the tumor was not completed. Results: The operation with VEMAST was successful in 29 patients. A conventional lobectomy by thoracotomy had to be done due to unusual bleeding from the pulmonary artery involved during VEMAST in one case and the procedure was interrupted because the pulmonary artery cloud not be separated from the tumor in another patient. There was no dead case or the patient who had any severe complication or adverse response to the radiant. Conclusion: Radionuclide therapy was performed to the treatment of stage II lung cancer with VEMAST in case that surgical resection was considered not to be satisfactory. Minithoractomy assisted with VATS lobectomy and radionuclide colloid 32P therapy is a safe and e?ective technique for some selected stage II lung cancer.

Influence of colloidal particle transfer on the quality of self-assembling colloidal photonic crystal under confined condition

The relationship between colloidal particle transfer and the quality of colloidal photonic crystal（CPC） is investigated by comparing colloidal particle self-assembling under the vertical channel（VC） and horizontal channel（HC） conditions.Both the theoretical analyses and the experimental measurements indicate that crystal quality depends on the stability of mass transfer.For the VC,colloidal particle transfer takes place in a stable laminar flow,which is conducive to forming high-quality crystal.In contrast,it happens in an unstable turbulent flow for the HC.Crystals with cracks and an uneven surface formed under the HC condition can be seen from the images of a field emission scanning electron microscope（SEM） and a three-dimensional（3D） laser scanning microscope（LSM）,respectively.

Colloid's influences on microalgae growth as a potential environmental factor

The role of colloid as “colloid pump” in the ocean is well known. The important influence of colloid in seawater on the growth of microalga was found in our 1999—2000 study. Colloid concentrates were obtained by employing a cross flow filtration system to ultrafilter seawater (which had been pre filtrated by 0.45 μm acetate cellulose membrane) successively with different membranes. Ultrafiltration retentions (we called them colloid concentrates) together with control sample (seawater without colloid) were then inoculated with two species of microalgae and cultivated in selected conditions. Monitoring of microalgae growth during cultivation showed that all colloid concentrates had obvious influence on the growth of the microalgae studied. Addition of Fe(OH) 3 colloid or organic colloid (protein or carbohydrate) to the control sample enhanced the microalgae’s growth.

Self-Assembly of Colloidosome Shells on Drug-Containing Hydrogels

Colloidosomes are composed of an aqueous or hydrogel corethat is coated by a semi-permeable colloidal shell. The properties of the shell can be varied to control the rate of release of encapsulated components such as drugs. Specifi-cally, the pores formed between the colloidal particles suppress transport of large components, while allowing diffusion of smaller ones. Self-assembly of colloidal particles on hydrogel films is a convenient method forcolloidosome synthesis, but to date little is known regarding the effect (if any) of the encapsulated drug on the shell packing density. In this paper we examined self-assembly of colloidal shells on alginate films containing four model drugs: aspirin, caffeine, theophylline and theobromine. We find that the packing density in the colloidal shells is low for all drugs, and ranges between 0.16 and 0.3. There is no clear correlation between drug properties (in particular, water solubility) and the packing density of the self-assembled colloidal shell.

Cadmium transport mediated by soil colloid and dissolved organic matter:A field study

This study investigated the potential role of soil colloids and dissolved organic matter （DOM） in transporting Cd through in situ undisturbed paddy soil monoliths. Brilliant Blue was used as a tracer to assess the effect of preferential flow on Cd down migration. Experimental results showed that deep penetration of Cd and Brilliant Blue into the soil profile took place due to the preferential flow through macropores, mainly earthworm channels, with much of chemicals thus bypassing the soil matrix. Dye tracer and Cd distribution within the soil matrix was fairly restricted to several centimeters. Colloid restrained the migration of both dye and Cd in the matrix and preferential flow area. DOM facilitated the transport of Cd and Brilliant Blue in matrix and macropores by about 10 cm over that of the control. Pearson＇s is correlation analysis revealed strong associations between Brilliant Blue concentrations, exchangeable Cd and total Cd concentrations in three studied plots indicating that they had taken the same preferential flow pathway.

Cr^(Ⅵ) adsorption on four typical soil colloids: equilibrium and kinetics

It is observed that the adsorption of chromium are greater on kaolinite minerals, red soil (R) and laterite (L) colloids than that on montmorillonite, indicotic black (IB) and yellow brown (YB) soil colloids. The adsorption process of Cr Ⅵ on these media can be further described by Langmuir or Freundlich equation quite well. The adsorption reaction of Cr Ⅵ is fast, and the adsorption equilibrium can be reached within the first two hours in moderate temperature. The adsorption quantity of Cr Ⅵ to kaolinite mineral increased with the increasing pH in the range of 2.0 to 7.0, then decreased at higher pH. But it showed some consistence among the four soil colloids. The lower the pH, the stronger the adsorption. The possible mechanisms are further discussed here. Meanwhile the influence of temperature on Cr Ⅵ adsorption on different soil colloid and clay minerals are also investigated.

Preparation of colloidal gold immunochromatography strip for detection of methamidophos residue

Methamidophos (Met) is a broad spectrum organophosphorus insecticide and acaricide.Even a trace of its residue is harmful to humans and many animals.In this study,the synthesis and identification of colloidal gold particles and antibody-colloidal gold conjugates were performed,and the preparation of colloidal gold immunochromatography strip was conducted for detection of Met residue.The size of colloidal gold particles was checked using a transmission electron microscope (TEM).The formation of antibody-coll...

DEPLETION POTENTIAL OF COLLOIDS: A DIRECT SIMULATION STUDY

The depletion interaction between a big sphere and a hard wall and between two big hard spheres in a hard sphere colloidal sytem was studied by the Monte Carlo method. Direct simulation of free energy difference was performed by means of the Acceptance Ratio Method (ARM).

Colloidal Gas Aphrons: A Novel Approach to Preventing Formation Impairment

Colloidal gas aphrons (CGAs) were first reported by Sebba (1971) as micro bubbles (25-125 μm), composed of a gas nucleus surrounded by a thin surfactant film and created by intense stirring of a surfactant solution. Since then, these colloidal dispersions have been used for diverse applications, with a particular focus on separation processes. However, exploitation of CGAs in petroleum industry is only at the outset. CGAs were first used in west Texas in 1998, under the name Aphron drilling fluids. This kind of fluid is characterized as having a continuous phase, a high viscosity at a low shear rate and containing, as an internal phase, micro air or gas bubbles, non-coalescing and recirculating. In this paper, we illuminate the physical and chemical properties of aphron drilling fluid and its processing mechanism.